Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Porous Materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Porosity in Sr 1-x Ca x FeO 3-δ oxygen carriers: The role of surface area and pretreatment on storage activity

Perovskite oxides have generated interest as robust, low-temperature oxygen carrier materials for a variety of clean energy applications, including chemical looping gasification and air separations. Methods to improve O 2 desorption kinetics are vital to allow these carriers to compete economically with traditional metal oxide carriers or cryogenic separations. In this report we investigated the cumulative roles that surface area, pretreatment, and elemental composition have on the oxygen storage properties of a state-of-the-art carrier system, Sr 1-x Ca x FeO 3-δ (x = 0.20, 0.25, 0.30) synthesized using multiple methods. Porous materials synthesized by the Pechini, or citrate, method had their surface area controlled using the synthesis temperature. The high surface area of the Sr 0.7 Ca 0.3 FeO 3-δ materials is most beneficial at low operating temperatures, such as 350 and 400 °C, as their reduction rates are twice as fast as those obtained with their bulk counterparts. These effects are observed at higher operating temperatures and within a single composition, but temperature tunability using variable Ca 2+ substitution in the Sr 1-x Ca x FeO 3-δ overshadows the improvements gained from higher surface areas. Additionally, we establish that pretreatment in N2 at an elevated temperature is necessary to enhance kinetics further. For maximum efficiency, pretreatment at the synthesis temperature is suggested for the Pechini method-synthesized systems, whereas 800 °C is adequate for bulk materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Influence of cementation on the yield surface of rocks numerically determined from digital microstructures

Digital Rock Physics has reached a level of maturity on the characterisation of primary properties that depend on the microstructure – such as porosity, permeability or elastic moduli – by numerically solving field equations on μCT scan images of rock. After small deformations or at depth though, most rocks eventually reach their limit of elasticity and the complementary plastic properties are needed to describe the full mechanical behaviour. Currently, determination of a rock’s yield surface from its microstructure is often restricted to semi-analytical criteria derived by limit analysis or numerical simulations performed on idealised geometries. Such simplification lacks representativeness, particularly for processes that affect directly the pore-grain interface such as the cementation phenomenon, happening during diagenesis. Eventually, only direct numerical simulation of elasto-plasticity performed on digitalised microstructures can be used to assess the strength of different cemented materials and its evolution with the alteration of the microstructure. In this study, we provide a comprehensive parametric study on the impact of cementation on rock strength for real microstructures of cemented granular materials. Compared to most previous studies, the whole yield surface is determined numerically (using Finite Element Method) in order to assess the influence of cementation for different stress-paths. The previously known tendency of rock to strengthen with increasing cementation volume is verified. New results on the influence of cement property namely Young’s modulus, friction and cohesion on the rock’s yield surface are explored. The envelopes obtained are compared to the ones obtained by experimental data and existing models. Finally, the framework presented in this study showcases the wider possibility of determining any rock’s or porous material’s yield surface from its microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Prediction by Convolutional Neural Networks of CO 2 /N 2 Selectivity in Porous Carbons from N 2 Adsorption Isotherm at 77 K

Abstract Porous carbons are an important class of porous materials with many applications, including gas separation. An N 2 adsorption isotherm at 77 K is the most widely used approach to characterize porosity. Conventionally, textual properties such as surface area and pore volumes are derived from the N 2 adsorption isotherm at 77 K by fitting it to adsorption theory and then correlating it to gas separation performance (uptake and selectivity). Here the N 2 isotherm at 77 K was used directly as input (representing feature descriptors for the porosity) to train convolutional neural networks to predict gas separation performance (using CO 2 /N 2 as a test case) for porous carbons. The porosity space for porous carbons was explored for higher CO 2 /N 2 selectivity. Porous carbons with a bimodal pore‐size distribution of well‐separated mesopores (3–7 nm) and micropores (<2 nm) were found to be most promising. This work will be useful in guiding experimental research of porous carbons with the desired porosity for gas separation and other applications.

Wang, Song↗
DOE OSTI2020

Prediction by Convolutional Neural Networks of CO 2 /N 2 Selectivity in Porous Carbons from N 2 Adsorption Isotherm at 77 K

Abstract Porous carbons are an important class of porous materials with many applications, including gas separation. An N 2 adsorption isotherm at 77 K is the most widely used approach to characterize porosity. Conventionally, textual properties such as surface area and pore volumes are derived from the N 2 adsorption isotherm at 77 K by fitting it to adsorption theory and then correlating it to gas separation performance (uptake and selectivity). Here the N 2 isotherm at 77 K was used directly as input (representing feature descriptors for the porosity) to train convolutional neural networks to predict gas separation performance (using CO 2 /N 2 as a test case) for porous carbons. The porosity space for porous carbons was explored for higher CO 2 /N 2 selectivity. Porous carbons with a bimodal pore‐size distribution of well‐separated mesopores (3–7 nm) and micropores (<2 nm) were found to be most promising. This work will be useful in guiding experimental research of porous carbons with the desired porosity for gas separation and other applications.

Wang, Song↗
DOE OSTI2022

Concurrent Enhancement of Acetylene Uptake Capacity and Selectivity by Progressive Core Expansion and Extra–Framework Anions in Pore–Space–Partitioned Metal–Organic Frameworks

A multi-stage core-expansion method is proposed here as one component of the integrative binding-site/extender/core-expansion (BEC) strategy. The conceptual deconstruction of the partitioning ligand into three editable parts draws our focus onto progressive core expansion and allows the optimization of both acetylene uptake and selectivity. Herein the effectiveness of this strategy is shown through a family of eight cationic pore-partitioned materials containing three different partitioning ligands and various counter anions. The optimized structure, Co 3 -cpt-tph-Cl (Hcpt=4-(p-carboxyphenyl)-1,2,4-triazole, H-tph=(2,5,8-tri-(4-pyridyl)-1,3,4,6,7,9-hexaazaphenalene) with the largest surface area and highest C 2 H 2 uptake capacity (200 cm 3 /g at 298 K), also exhibits (desirably) the lowest CO 2 uptake and hence the highest C 2 H 2 /CO 2 selectivity. The successful boost in both C 2 H 2 capacity and IAST selectivity allows Co 3 -cpt-tph-Cl to rank among the best crystalline porous materials, ionic MOFs in particular, for C 2 H 2 uptake and C 2 H 2 /CO 2 experimental breakthrough separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Formation of three-dimensional bicontinuous structures via molten salt dealloying studied in real-time by in situ synchrotron X-ray nano-tomography

Abstract Three-dimensional bicontinuous porous materials formed by dealloying contribute significantly to various applications including catalysis, sensor development and energy storage. This work studies a method of molten salt dealloying via real-time in situ synchrotron three-dimensional X-ray nano-tomography. Quantification of morphological parameters determined that long-range diffusion is the rate-determining step for the dealloying process. The subsequent coarsening rate was primarily surface diffusion controlled, with Rayleigh instability leading to ligament pinch-off and creating isolated bubbles in ligaments, while bulk diffusion leads to a slight densification. Chemical environments characterized by X-ray absorption near edge structure spectroscopic imaging show that molten salt dealloying prevents surface oxidation of the metal. In this work, gaining a fundamental mechanistic understanding of the molten salt dealloying process in forming porous structures provides a nontoxic, tunable dealloying technique and has important implications for molten salt corrosion processes, which is one of the major challenges in molten salt reactors and concentrated solar power plants.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Programmable bionanocomposite coated fertilizers for prolonged controlled release of nitrogen

Controlled-release fertilizers (CRFs) present a promising solution for alleviating food and nutrient scarcity. However, their development has been mainly hindered by both rapid and unsynchronized nutrient release and unsustainable coating materials. In this study, we address this issue by developing a new coating layer for CRFs using a programmable biopolyurethane nanocomposite. This nanocomposite is prepared from diphenylmethane diisocyanate (MDI)-functionalized bentonite nanoclay (BNT-MDI) and a biopolyol from biomass waste. The results show that the BNT-MDI-doped CRFs (BCRFs) exhibit an impressive nitrogen (N)-release longevity of approximately 120 days at a 4 wt% coating ratio, surpassing previous CRF formulations. In a 30-day snap bean cultivation study, BCRF significantly improved root length (1000%), leaf length (257%), leaf width (400%), and plant height (1400%) compared to the control. The superior performance of BCRF is attributed to the PU-nanoclay biocomposite film, with full nano-exfoliation, controllable porosity, and high crosslinking density. Furthermore, we introduce a new dynamic release mechanism and establish a quantitative relationship between the nanostructure, property, and release performance of BCRF by combining the multiplicative and diffusion models for porous materials. Finally, this study provides a theoretical framework and a straightforward methodology for designing programmable nanocomposite structures for future biobased CRFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structurally Driven Selective Adsorption of Hydrocarbons by Metal Substitution in Isostructural Rare-Earth Metal–Organic Frameworks

The design and realization of highly selective nanoporous materials are necessary to target critical separations across industries. By leveraging pore size, pore shape, and linker functionalization, the design of nanoporous solid adsorbents will enable the rapid production of energy efficient separation materials for high-value gas mixtures. This study uses a combination of modeling, synthesis, and gas adsorption testing to investigate a new class of small-pore isostructural rare-earth (RE) 2,5-dihydroxyterephthalic acid (DOBDC) metal–organic frameworks (MOFs) (RE: Pr-, Gd-, Er-, Yb; DOBDC = 2,5-dihydroxyterephthalic acid) and their adsorption selectivity for acetylene/ethylene mixtures. Density functional theory simulations identified that selective binding of acetylene over ethylene in the Gd-, Er-, and Yb-DOBDC MOFs was due to hydrogen-bonding between acetylene and the linker hydroxyl. Adsorption experiments validated the computational results by identifying mechanisms that control the acetylene/ethylene adsorption selectivity and high acetylene adsorption. Furthermore, dynamic column breakthrough experiments with the Gd-DOBDC MOF validated the simulations and indicated that ethylene can be separated from acetylene in a mixture containing 1 vol % acetylene and 39 vol % ethylene (balance argon). In conclusion, the results highlight the complexity of gas binding in functional porous materials and how combining modeling and experiment enables a fundamental understanding of gas–framework interactions that can be leveraged for the design of future separation materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High-Performance CO 2 Capture from Air by Harnessing the Power of CaO- and Superbase-Ionic-Liquid-Engineered Sorbents

Direct air capture (DAC) of CO 2 by solid porous materials represents an attractive “negative emission” technology. However, state-of-the-art sorbents based on supported amines still suffer from unsolved high energy consumption and stability issues. For this work, taking clues from the CO 2 interaction with superbase-derived ionic liquids (SILs), high-performance and tunable sorbents in DAC of CO 2 was developed by harnessing the power of CaO- and SIL-engineered sorbents. Deploying mesoporous silica as the substrate, a thin CaO layer was first introduced to consume the surface-OH groups, and then active sites with different basicities (e. g., triazolate and imidazolate) were introduced as a uniformly distributed thin layer. The as-obtained sorbents displayed high CO 2 uptake capacity via volumetric (at 0.4 mbar) and breakthrough test (400 ppm CO 2 source), rapid interaction kinetics, facile CO 2 releasing, and stable sorption/desorption cycles. Operando diffuse reflectance infrared Fourier transformation spectroscopy (DRIFTS) analysis under simulated air atmosphere and solid-state NMR under 13 CO 2 atmosphere demonstrated the critical roles of the SIL species in low-concentration CO 2 capture. The fundamental insights obtained in this work provide guidance on the development of high-performance sorbents in DAC of CO 2 by leveraging the combined advantages of porous solid scaffolds and the unique features of CO 2 -philic ionic liquids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Designer Metal–Organic Frameworks for Size–Exclusion–Based Hydrocarbon Separations: Progress and Challenges

The separation of hydrocarbons is of primary importance in the petrochemical industry but remains a challenging process. Hydrocarbon separations have traditionally relied predominantly on costly and energy intensive heat-driven procedures such as low temperature distillations. Adsorptive separation based on porous solids represents an alternative technology that is potentially more energy efficient for the separation of some hydrocarbons. Great efforts have been made recently not only on the development of adsorbents with optimal separation performance but also towards the subsequent implementation of adsorption-based separation technology. Emerging as a relatively new class of multifunctional porous materials, metal-organic frameworks hold substantial promise as adsorbents for highly efficient separation of hydrocarbons. This is because of their exceptional and intrinsic porosity tunability which enables size-exclusion based separations that render the highest possible separation selectivity. In this review, we highlight the recent advances in the development of MOFs for separation of selected groups of hydrocarbons, including methane/C2 hydrocarbons, normal alkanes, alkane isomers, alkane/alkene/alkyne, and C8 alkylaromatics, with a particular focus on separations based on size-exclusion mechanism. Insights into tailor-made structures, material design strategies, and structure-property relations will be elucidated. In addition, the existing challenges and possible future directions of this important research field will be discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tuning Internal Strain in Metal–Organic Frameworks via Vapor Phase Infiltration for CO 2 Reduction

Abstract A gas‐phase approach to form Zn coordination sites on metal–organic frameworks (MOFs) by vapor‐phase infiltration (VPI) was developed. Compared to Zn sites synthesized by the solution‐phase method, VPI samples revealed approximately 2.8 % internal strain. Faradaic efficiency towards conversion of CO 2 to CO was enhanced by up to a factor of four, and the initial potential was positively shifted by 200–300 mV. Using element‐specific X‐ray absorption spectroscopy, the local coordination environment of the Zn center was determined to have square‐pyramidal geometry with four Zn−N bonds in the equatorial plane and one Zn‐OH 2 bond in the axial plane. The fine‐tuned internal strain was further supported by monitoring changes in XRD and UV/Visible absorption spectra across a range of infiltration cycles. The ability to use internal strain to increase catalytic activity of MOFs suggests that applying this strategy will enhance intrinsic catalytic capabilities of a variety of porous materials.

Yang, Fan↗
DOE OSTI2022

Simultaneous Control of Pore‐Space Partition and Charge Distribution in Multi‐Modular Metal–Organic Frameworks

Abstract We report here a strategy for making anionic pacs type porous materials by combining pore space partition with charge reallocation. The method uses the first negatively charged pore partition ligand (2,5,8‐tri‐(4‐pyridyl)‐1,3,4,6,7,9‐hexaazaphenalene, H‐tph) that simultaneously enables pore partition and charge reallocation. Over two dozen anionic pacs materials have been made to demonstrate their excellent chemical stability and a high degree of tunability. Notably, Ni 3 ‐bdt‐tph (bdt=1,4‐benzeneditetrazolate) exhibits month‐long water stability, while CoV‐bdt‐tph sets a new benchmark for C 2 H 2 storage capacity under ambient conditions for ionic MOFs. In addition to tunable in‐framework modules, we show feasibility to tune the type and concentration of extra‐framework counter cations and their influence on both stability and capability to separate industrial C 3 H 8 /C 3 H 6 and C 6 H 6 /C 6 H 12 mixtures.

Hong, Anh N.↗
DOE OSTI2023

Expanding Linker Dimensionality in Metal‐organic Frameworks for sub‐Ångstrom Pore Control for Separation Applications

Abstract Metal‐organic frameworks (MOFs) are a class of porous materials with high surface areas, which are acquiring rapid attention on an exponential basis. A significant characteristic of MOFs is their ability to act as adsorbents to selectively separate component mixtures of similar size, thereby addressing the technological need for an alternative approach to conventional distillation methods. Recently, MOFs comprising a 3‐Dimensional (3D) linker have shown outstanding capabilities for difficult separations compared to the parent 2‐Dimensional (2D) analogue. 3D‐linkers with a polycyclic core are underrepresented in the MOF database due to the widespread preferred use of 2D‐linkers and the misconceived high‐cost of 3D linkers. We summarize the recent research of 3D‐linker MOFs and highlight their beneficial employment for selective gas and hydrocarbon adsorption and separation. Furthermore, we outline forecasts in this area to create a platform for widespread adoption of 3D‐linkers in MOF synthesis.

Macreadie, Lauren K.↗
DOE OSTI2023

Kinetic Control via Binding Sites within the Confined Space of Metal Metalloporphyrin‐Frameworks for Enhanced Shape‐Selectivity Catalysis

Abstract One striking feature of enzyme is its controllable ability to trap substrates via synergistic or cooperative binding in the enzymatic pocket, which renders the shape‐selectivity of product by the confined spatial environment. The success of shape‐selective catalysis relies on the ability of enzyme to tune the thermodynamics and kinetics for chemical reactions. In emulation of enzyme's ability, we showcase herein a targeting strategy with the substrate being anchored on the internal pore wall of metal‐organic frameworks (MOFs), taking full advantage of the sterically kinetic control to achieve shape‐selectivity for the reactions. For this purpose, a series of binding site‐accessible metal metalloporphyrin‐frameworks (MMPFs) have been investigated to shed light on the nature of enzyme‐mimic catalysis. They exhibit a different density of binding sites that are well arranged into the nanospace with corresponding distances of opposite binding sites. Such a structural specificity results in a facile switch in selectivity from an exclusive formation of the thermodynamically stable product to the kinetic product. Thus, the proposed targeting strategy, based on the combination of porous materials and binding events, paves a new way to develop highly efficient heterogeneous catalysts for shifting selectivity.

Zhang, Weijie↗
DOE OSTI2023

Evidence of a Uranium‐Paddlewheel Node in a Catecholate‐Based Metal–Organic Framework

Abstract The interactions between uranium and non‐innocent organic species are an essential component of fundamental uranium redox chemistry. However, they have seldom been explored in the context of multidimensional, porous materials. Uranium‐based metal–organic frameworks (MOFs) offer a new angle to study these interactions, as these self‐assembled species stabilize uranium species through immobilization by organic linkers within a crystalline framework, while potentially providing a method for adjusting metal oxidation state through coordination of non‐innocent linkers. We report the synthesis of the MOF NU‐1700 , assembled from U 4+ ‐paddlewheel nodes and catecholate‐based linkers. We propose this highly unusual structure, which contains two U 4+ ions in a paddlewheel built from four linkers—a first among uranium materials—as a result of extensive characterization via powder X‐ray diffraction (PXRD), sorption, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA), in addition to density functional theory (DFT) calculations.

Knapp, Julia G.↗
DOE OSTI2023

A Porous Crystalline Nitrone‐Linked Covalent Organic Framework**

Abstract Herein, we report the synthesis of a nitrone‐linked covalent organic framework, COF‐115, by combining N , N′ , N′ , N ′′′‐(ethene‐1, 1, 2, 2‐tetrayltetrakis(benzene‐4, 1‐diyl))tetrakis(hydroxylamine) and terephthaladehyde via a polycondensation reaction. The formation of the nitrone functionality was confirmed by solid‐state 13 C multi cross‐polarization magic angle spinning NMR spectroscopy of the 13 C‐isotope‐labeled COF‐115 and Fourier‐transform infrared spectroscopy. The permanent porosity of COF‐115 was evaluated through low‐pressure N 2 , CO 2 , and H 2 sorption experiments. Water vapor and carbon dioxide sorption analysis of COF‐115 and the isoreticular imine‐linked COF indicated a superior potential of N ‐oxide‐based porous materials for atmospheric water harvesting and CO 2 capture applications. Density functional theory calculations provided valuable insights into the difference between the adsorption properties of these COFs. Lastly, photoinduced rearrangement of COF‐115 to the associated amide‐linked material was successfully demonstrated.

Kurandina, Daria↗
DOE OSTI2022

Simultaneous Control of Pore-Space Partition and Charge Distribution in Multi-Modular Metal–Organic Frameworks

Here we report here a strategy for making anionic pacs type porous materials by combining pore space partition with charge reallocation. The method uses the first negatively charged pore partition ligand (2,5,8-tri-(4-pyridyl)-1,3,4,6,7,9-hexaazaphenalene, H-tph) that simultaneously enables pore partition and charge reallocation. Over two dozen anionic pacs materials have been made to demonstrate their excellent chemical stability and a high degree of tunability. Notably, Ni 3 -bdt-tph (bdt=1,4-benzeneditetrazolate) exhibits month-long water stability, while CoV-bdt-tph sets a new benchmark for C 2 H 2 storage capacity under ambient conditions for ionic MOFs. In addition to tunable in-framework modules, we show feasibility to tune the type and concentration of extra-framework counter cations and their influence on both stability and capability to separate industrial C 3 H 8 /C 3 H 6 and C 6 H 6 /C 6 H 12 mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Self-Adjusting Metal–Organic Framework for Efficient Capture of Trace Xenon and Krypton

The capture of the xenon and krypton from nuclear reprocessing off-gas is essential to the treatment of radioactive waste. Although various porous materials have been employed to capture Xe and Kr, the development of high-performance adsorbents capable of trapping Xe/Kr at very low partial pressure as in the nuclear reprocessing off-gas conditions remains challenging. Herein, we report a self-adjusting metal-organic framework based on multiple weak binding interactions to capture trace Xe and Kr from the nuclear reprocessing off-gas. The self-adjusting behavior of ATC-Cu and its mechanism have been visualized by the in-situ single-crystal X-ray diffraction studies and theoretical calculations. The self-adjusting behavior endows ATC-Cu unprecedented uptake capacities of 2.65 and 0.52 mmol g -1 for Xe and Kr respectively at 0.1 bar and 298 K, as well as the record Xe capture capability from the nuclear reprocessing off-gas. Further, our work not only provides a benchmark Xe adsorbent but proposes a new route to construct smart materials for efficient separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗