Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Population Structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

The Star Formation History of Orion and its Environs

During the Winter and Fall 2001 observing campaigns, we obtained multifilter photometry using the Quest camera on the 1mt Schmidt of the Venezuelan National Observatory, to continue the survey of the Orion clouds. In the Winter 2001 season, we obtained photometry for 9 scans at DEC=+5, 3 scans at DEC=-5, and 2 scans at DEC=-3, while 2 additional scans at DEC=-3 were obtained during the Fall 2001 observing campaign (the width of each scan is 2.3 arc minutes). The photometric survey has not been completed this season because the instrument was damaged by lightening on Sep 2001 and operations were suspended until Dec 2001. Observations are still under way. Nonetheless, we have enough scans at -3 and +5 to start selecting candidates for spectroscopic follow up on the next season. Spectra of more than 300 objects was obtained with the FAST spectrograph on the Mt Hopkins 48 inch telescope during observing campaigns Jan-March 2001, and Oct-Dec 2001. Bad weather prevented observations with Hydra on the WIYN telescope on KPNO in Jan 2001. The FAST spectra are been analyzed to select the young population of the regions. Observations in the JHKL bands were obtained for a sample of 20-30 objects in Ori Ia and Ib from scan centered at DEC=-l, with the StellIRCam on the Mt Hopkins 48 inch telescope on Nov 2001. L band observations will be effective for picking up objects surrounded by accretion disks, in which inner disk holes prevent having any excess at shorter wavelength bands. Observations at 10 micrometers and 18 micrometers were obtained in que mode for a sample of 20 objects in Ori Ia and Ib in the same regions as the near IR photometry with the Gemini-South telescope. These new data is presently been reduced and analyzed, together with data from the observing campaigns of 2000. Analysis of Hydra fields at strips centered at DEC=-1 and +1 have confirmed 105 more candidates as low mass pre-main sequence objects. In addition, every target was detected at 10 micrometers and a few at 18 micrometers. With these data, combined with our optical and JHKL photometry, we will construct spectral energy distributions. This will allow us to begin studying the structure of disks around low mass T Tauri stars in the distributed population of the Orion clouds, for direct comparison with that of Taurus. Ours is the first determination of the infrared emission of protoplanetary disks around low mass stars in the Orion region.

Calvet, Nuria↗

Cosmic Infrared Background and Early Stellar Populations

Cosmic infrared background (CIB) contains information about galaxy luminosities over the entire history of the Universe and can be a powerful diagnostic of the early populations otherwise inaccessible to telescopic studies. Its measurements are very difficult because of the strong IR foregrounds from the Solar system and the Galaxy. Nevertheless, substantial recent progress in measuring the CIB and its structure has been made. The measurements now allow to set significant constraints on early galaxy evolution and, perhaps, even detect the elusive Population III era. We discuss briefly the theory behind the CIB, review the latest measurements of the CIB and its structure, and discuss their implications for detecting and/or constraining the first stars and their epochs.

Kashlinsky, A.↗

The Role of Instabilities in Plasmaspheric Heating, Flux Tube Refilling, and the Development of Spatial Structures

Plasma instabilities appear to play an important role in plasmasphere dynamics. Direct interactions between the plasmasphere and other plasma populations lead to energy transfer and heating, to equatorial trapping, and to changes in ionospheric outflow. Super-thermal electron and ring current populations are the dominant sources of energy for these processes. Flute (Interchange), electromagnetic lower-hybrid drift, and E x B drift instabilities can also play important roles in the distribution of thermal, plasmaspheric plasma. As our attention has returned to the remaining plasmaspheric mysteries, it has become clear that the details of plasmaspause formation and erosion and the development of localized, dense thermal plasma structures are almost completely unexplained. Radially sharp density depletions and generalized density loss are seen inside the plasmapause. Narrow and extended regions of enhanced thermal plasma density is found throughout the magnetosphere, even after extended periods of quite geomagnetic conditions. Sharp gradients are often seen on the westward edge of density enhancements, while eastward boundaries are often highly structured.

Gallagher, D. L.↗

Influence of Cation Species on Thermal Expansion of Y2Si2O7–Gd2Si2O7 Solid Solutions

Mixtures of Y 2 Si 2 O 7 and Gd 2 Si 2 O 7 were synthesized by solid-state reaction at 1600°C and characterized via in situ x-ray diffraction (XRD) to determine their coefficients of thermal expansion (CTE). All solid solutions within the system exhibited the orthorhombic δ-RE 2 Si 2 O 7 (Pna2 1 ) structure. Thermal expansion measurements of Y 2 Si 2 O 7 and Gd 2 Si 2 O 7 correlated well with reported values in literature, and all synthesized solid solutions exhibited CTEs between Y 2 Si 2 O 7 and Gd 2 Si 2 O 7 . Generally, there was a slight decrease in CTE exhibited by the materials with increasing Gd 2 Si 2 O 7 content, with Gd 2 Si 2 O 7 having the lowest CTEs and Y 2 Si 2 O 7 the highest CTEs. The decrease in CTE was attributed to stronger bonds of Gd-O over Y-O, as determined by calculated crystal orbital Hamilton populations using density functional theory. However, such differences were very small and crystal structure was the dominating factor in CTE trends.

rare earth silicates↗

Stellar Populations in Compact Galaxy Groups: a Multi-wavelength Study of HCGs 16, 22, and 42, Their Star Clusters, and Dwarf Galaxies

We present a multi-wavelength analysis of three compact galaxy groups, Hickson compact groups (HCGs) 16, 22, and 42, which describe a sequence in terms of gas richness, from space- (Swift, Hubble Space Telescope (HST), and Spitzer) and ground-based (Las Campanas Observatory and Cerro Tololo Inter-American Observatory) imaging and spectroscopy.We study various signs of past interactions including a faint, dusty tidal feature about HCG 16A, which we tentatively age-date at <1 Gyr. This represents the possible detection of a tidal feature at the end of its phase of optical observability. Our HST images also resolve what were thought to be double nuclei in HCG 16C and D into multiple, distinct sources, likely to be star clusters. Beyond our phenomenological treatment, we focus primarily on contrasting the stellar populations across these three groups. The star clusters show a remarkable intermediate-age population in HCG 22, and identify the time at which star formation was quenched in HCG 42. We also search for dwarf galaxies at accordant redshifts. The inclusion of 33 members and 27 "associates" (possible members) radically changes group dynamical masses, which in turn may affect previous evolutionary classifications. The extended membership paints a picture of relative isolation in HCGs 16 and 22, but shows HCG 42 to be part of a larger structure, following a dichotomy expected from recent studies. We conclude that (1) star cluster populations provide an excellent metric of evolutionary state, as they can age-date the past epochs of star formation; and (2) the extended dwarf galaxy population must be considered in assessing the dynamical state of a compact group.

Compact Galaxy↗

Statistical Issues in Galaxy Cluster Cosmology

The number and growth of massive galaxy clusters are sensitive probes of cosmological structure formation. Surveys at various wavelengths can detect clusters to high redshift, but the fact that cluster mass is not directly observable complicates matters, requiring us to simultaneously constrain scaling relations of observable signals with mass. The problem can be cast as one of regression, in which the data set is truncated, the (cosmology-dependent) underlying population must be modeled, and strong, complex correlations between measurements often exist. Simulations of cosmological structure formation provide a robust prediction for the number of clusters in the Universe as a function of mass and redshift (the mass function), but they cannot reliably predict the observables used to detect clusters in sky surveys (e.g. X-ray luminosity). Consequently, observers must constrain observable-mass scaling relations using additional data, and use the scaling relation model in conjunction with the mass function to predict the number of clusters as a function of redshift and luminosity.

Galaxy↗

Enhancement of the jets in NGC 1097

Plates of NGC 1097 taken in four spectral bands have been digitized and processed at JPL's Image Processing Laboratory. The processing has revealed that (1) there is a fourth jet, R4, counter to the L-shaped jet, R1; (2) the area density of point sources in the jets is no different from that found on the sky; (3) two of the jets, R1 and R2, are bluer than the night sky, while one of the jets, R3, is redder than the night sky; (4) the nonstellar objects situated on the jets are noticeably bluer than the night sky; and (5) color-enhanced images of the spiral structure illustrate the distribution of both gaseous and spiral-arm stellar population disrupted from symmetry by an apparent companion elliptical.

Lorre, J. J.↗

Acceleration of electrons outside flares - Coronal manifestation and possible origin

Imaging observations at decimetric and metric wavelengths of the solar corona are used to investigate a short-lasting noise storm and the associated changes of the underlying active-region plasma. It is shown that a new source appears in the active region in close temporal and spatial coincidence with the onset of the noise storm in the middle corona. The onset of the noise storm is delayed at longer wavelengths. At a given wavelength, the noise-storm source undergoes a systematic slow movement with a significant component perpendicular to the magnetic-field lines above the active region. The observations are tentatively attributed to the emission of nonthermal electrons in a system of expanding coronal loops, the expansion being initiated by the appearance of the new 21-cm source in the low atmosphere. The derived velocity of expansion is about 80 to 150 km/s. The electrons emitting the noise storm cannot be provided by the high-energy tail of the Maxwellian in the new active region source, but originate either from a nonthermal population in this source or from acceleration at higher altitudes, in the structures which give rise to the noise storm.

Raulin, J. P.↗

The Next Generation Space Telescope - A large UV-IR successor to HST

Attention is given to the science goals of the Next Generation Space Telescope (NGST), namely, detection and spectroscopy of gas giant planets to earthlike planets around nearby stars, study of nearby star-forming complexes with resolutions of 5-50 AU in the visible and IR, measurement of stellar populations in a variety of environments, spatial resolution and mapping of complex structures in the inner narrow line regions for AGN and QSOs, and investigation of the structure and evolution of galaxies at redshifts greater than 1. The NGST characteristics, milestones, long-term strategy, and launch capability are also discussed.

Illingworth, Garth↗

High-velocity, high-excitation neutral carbon in a cloud in the Vela supernova remnant

HD 72089 is situated behind the Vela supernova remnant, and the interstellar absorption lines in the spectrum of this star are remarkable for two reasons. First, there are six distinct velocity components that span the (heliocentric) velocity range -60 to +121 km/s in the lines of Na I and Ca II. Second, two of the components at high velocity, one at +85 km/s and another at +121.5 km/s, have densities that are large enough to produce observable lines from neutral carbon. The gas moving at +121.5 km/s has such a large pressure that the excited fine-structure levels of the ground electronic state of C I are collisionally populated nearly in proportion to their level degeneracies. This high-velocity gas exhibits unusually low column densities of Mg I and Na I, compared to that of C I. We propose that the +121.5 km/s component represents gas that has cooled and recombined in a zone that follows a shock driven into a cloud by the very recent passage of a supernova blast wave. A representative preshock density of n(sub H) approximately = 13/cc and velocity v(sub s) = 100 km/s is indicated by the strength of diffuse (O III) emission lines seen in directions very near HD 72089. The strong collisional population of excited C I and apparent absence of excited levels of O I give a most favorable fit to the conditions 1000 less than n(sub H) less than 2900/cc over a temperature range 300 less than T less than 1000 K. The fact that the compression is not substantially more than this indicates that the preshock gas may have had an embedded, transverse magnetic field with a strength B greater than or approximately = 1 micro-G. The large dynamical pressure of the supernova blast wave that would be needed to create the cloud shock that we describe implies that the energy of the supernova was 8 x 10(exp 51) ergs, if the Vela remnant is 500 pc away. We can bring this value much closer to typical supernova energies E less than or approximately = 10(exp 51) ergs if the distance to the remnant is revised downward by at least a factor of 2.

Jenkins, Edward B.↗

Utilization of on-site resources for regenerative life support systems at Lunar and Martian outposts

Lunar and martian materials can be processed and used at planetary outposts to reduce the need (and thus the cost) of transportng supplies from Earth. A variety of uses for indigenous, on-site materials have been suggested, including uses as rocket propellants, construction materials, and life support materials. Utilization of on-site resources will supplement Regenerative Life Support Systems (RLSS) that will be needed to regenerate air, water, wastes, and to produce food (e.g., plants) for human consumption during long-duration space missions. Natural materials on the Moon and/or Mars may be used for a variety of RLSS needs including (1) soils or solid-support substrate for plant growth, (2) sources for extraction of essential plant-growth nutrients, (3) sources of O2, H2, CO2, and water, (4) substrates for microbial populations in the degradation of wastes, and (5) shielding materials surrounding outpost structures to protect humans, plants, and microorganisms from radiation. In addition to the regolith, the martian atmosphere will provide additional resources at a Mars outpost, including water, CO2 and other atmospheric gases.

Ming, Douglas W.↗

The New NASA Orbital Debris Engineering Model ORDEM2000

The NASA Orbital Debris Program Office at Johnson Space Center has developed a new computer-based orbital debris engineering model, ORDEM2000, which describes the orbital debris environment in the low Earth orbit region between 200 and 2000 km altitude. The model is appropriate for those engineering solutions requiring knowledge and estimates of the orbital debris environment (debris spatial density, flux, etc.). ORDEM2000 can also be used as a benchmark for ground-based debris measurements and observations. We incorporated a large set of observational data, covering the object size range from 10 mm to 10 m, into the ORDEM2000 debris database, utilizing a maximum likelihood estimator to convert observations into debris population probability distribution functions. These functions then form the basis of debris populations. We developed a finite element model to process the debris populations to form the debris environment. A more capable input and output structure and a user-friendly graphical user interface are also implemented in the model. ORDEM2000 has been subjected to a significant verification and validation effort. This document describes ORDEM2000, which supersedes the previous model, ORDEM96. The availability of new sensor and in situ data, as well as new analytical techniques, has enabled the construction of this new model. Section 1 describes the general requirements and scope of an engineering model. Data analyses and the theoretical formulation of the model are described in Sections 2 and 3. Section 4 describes the verification and validation effort and the sensitivity and uncertainty analyses. Finally, Section 5 describes the graphical user interface, software installation, and test cases for the user.

Liou, Jer-Chyi↗

Agriculture on Mars: Soils for Plant Growth

Robotic rovers and landers have enabled the mineralogical, chemical, and physical characterization of loose, unconsolidated materials on the surface of Mars. Planetary scientists refer to the regolith material as "soil." NASA is currently planning to send humans to Mars in the mid 2030s. Early missions may rely on the use of onsite resources to enable exploration and self-sufficient outposts on Mars. The martian "soil" and surface environment contain all essential plant growth elements. The study of martian surface materials and how they might react as agricultural soils opens a new frontier for researchers in the soil science community. Other potential applications for surface "soils" include (i) sources for extraction of essential plant-growth nutrients, (ii) sources of O2, H2, CO2, and H2O, (iii) substrates for microbial populations in the degradation of wastes, and (iv) shielding materials surrounding outpost structures to protect humans, plants, and microorganisms from radiation. There are many challenges that will have to be addressed by soil scientists prior to human exploration over the next two decades.

Ming, D. W.↗

Mapping the Interstellar Reddening and Extinction toward Baade's Window Using Minimum Light Colors of ab-type RR Lyrae Stars: Revelations from the De-reddened Color–Magnitude Diagrams

We have obtained repeated images of six fields toward the Galactic bulge in five passbands (u, g, r, i, z) with the DECam imager on the Blanco 4 m telescope at CTIO. From more than 1.6 billion individual photometric measurements in the field centered on Baade’s window, we have detected 4877 putative variable stars. A total of 474 of these have been confirmed as fundamental mode RR Lyrae stars, whose colors at minimum light yield line-of- sight reddening determinations, as well as a reddenning law toward the Galactic Bulge, which differs significantly from the standard R(V) = 3.1 formulation. Assuming that the stellar mix is invariant over the 3 square-degree field, we are able to derive a line-of-sight reddening map with sub-arcminute resolution, enabling us to obtain de-reddened and extinction corrected color–magnitude diagrams (CMDs) of this bulge field using up to 2.5 million well-measured stars. The corrected CMDs show unprecedented detail and expose sparsely populated sequences: for example, delineation of the very wide red giant branch, structure within the red giant clump, the full extent of the horizontal branch, and a surprising bright feature that is likely due to stars with ages younger than 1 Gyr. We use the RR Lyrae stars to trace the spatial structure of the ancient stars and find an exponential decline in density with Galactocentric distance. We discuss ways in which our data products can be used to explore the age and metallicity properties of the bulge, and how our larger list of all variables is useful for learning to interpret future LSST alerts.

Abhijit Saha↗

Galactic dual population models of gamma-ray bursts

We investigate in more detail the properties of two-population models for gamma-ray bursts in the galactic disk and halo. We calculate the gamma-ray burst statistical properties, mean value of (V/V(sub max)), mean value of cos Theta, and mean value of (sin(exp 2) b), as functions of the detection flux threshold for bursts coming from both Galactic disk and massive halo populations. We consider halo models inferred from the observational constraints on the large-scale Galactic structure and we compare the expected values of mean value of (V/V(sub max)), mean value of cos Theta, and mean value of (sin(exp 2) b), with those measured by Burst and Transient Source Experiment (BATSE) and other detectors. We find that the measured values are consistent with solely Galactic populations having a range of halo distributions, mixed with local disk distributions, which can account for as much as approximately 25% of the observed BATSE bursts. M31 does not contribute to these modeled bursts. We also demonstrate, contrary to recent arguments, that the size-frequency distributions of dual population models are quite consistent with the BATSE observations.

Higdon, J. C.↗

Comparison of Two Statistical Models for Low Boom Dose-response Relationships with Correlated Responses

This study compares two statistical models to construct summary dose-response curves for low boom community noise surveys. Data from two NASA field surveys are used that consist of multiple responses per survey participant. These data require an approach that accounts for the correlation among repeated annoyance observations from the same participant. A multilevel model accounts for the correlation by allowing estimated parameters to vary with each survey participant. On the other hand, a population average model utilizes generalized estimating equations and accounts for the correlation via a userspecified within-subject correlation structure. A visual comparison of the dose-response curves for these two methods reveals similar results. When comparing specific points along the summary curves, the multilevel model yields more precise confidence bounds than the population average model. The similarity between the summary curves derived from each model lends validity to both approaches for approximating a population representative summary curve, though modeling assumptions may lend favor to the multilevel logistic modeling approach over the population average model.

dose-response↗

Banded Electron Structure Formation in the Inner Magnetosphere

Banded electron structures in energy-time spectrograms have been observed in the inner magnetosphere concurrent with a sudden relaxation of geomagnetic activity. In this study, the formation of these banded structures is considered with a global, bounce-averaged model of electron transport, and it is concluded that this structure is a natural occurrence when plasma sheet electrons are captured on closed drift paths near the Earth. These bands do not appear unless there is capture of plasma sheet electrons; convection along open drift paths making open pass around the Earth do not have time to develop this feature. The separation of high-energy bands from the injection population due to the preferential advection of the gradient-curvature drift creates spikes in the energy distribution, which overlap to form a series of bands in the energy spectrograms. The lowest band is the bulk of the injected population in the sub-key energy range. Using the Kp history for an observed banded structure event, a cloud of plasma sheet electrons is captured and the development of their distribution function is examined and discussed.

Liemohn, M. W.↗

Astronaut Bone Medical Standards Derived from Finite Element (FE) Models of QCT Scans from Population Studies

This work was accomplished in support of the Finite Element [FE] Strength Task Group, NASA Johnson Space Center [JSC], Houston, TX. This group was charged with the task of developing rules for using finite-element [FE] bone-strength measures to construct operating bands for bone health that are relevant to astronauts following exposure to spaceflight. FE modeling is a computational tool used by engineers to estimate the failure loads of complex structures. Recently, some engineers have used this tool to characterize the failure loads of the hip in population studies that also monitored fracture outcomes. A Directed Research Task was authorized in July, 2012 to investigate FE data from these population studies to derive these proposed standards of bone health as a function of age and gender. The proposed standards make use of an FE-based index that integrates multiple contributors to bone strength, an expanded evaluation that is critical after an astronaut is exposed to spaceflight. The current index of bone health used by NASA is the measurement of areal BMD. There was a concern voiced by a research and clinical advisory panel that the sole use of areal BMD would be insufficient to fully evaluate the effects of spaceflight on the hip. Hence, NASA may not have a full understanding of fracture risk, both during and after a mission, and may be poorly estimating in-flight countermeasure efficacy. The FE Strength Task Group - composed of principal investigators of the aforementioned population studies and of FE modelers -donated some of its population QCT data to estimate of hip bone strength by FE modeling for this specific purpose. Consequently, Human Health Countermeasures [HHC] has compiled a dataset of FE hip strengths, generated by a single FE modeling approach, from human subjects (approx.1060) with ages covering the age range of the astronauts. The dataset has been analyzed to generate a set of FE strength cutoffs for the following scenarios: a) Qualify an applicant for astronaut candidacy, b) Qualify an astronaut for a long-duration (LD) mission, c) Qualify a veteran LD astronaut for a second LD mission, and d) Establish a non-permissible, minimum hip strength following a given mission architecture. This abstract will present the FE-based standards accepted by the FE Strength Task Group for its recommendation to HHC in January 2015.

Sibonga, J. D.↗