Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Physics informed machine learning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

SAM-ML: Integrating data-driven closure with nuclear system code SAM for improved modeling capability

Advanced reactors often involve complicated thermal-fluid (T-F) phenomena. Modeling such phenomena with the traditional one-dimensional (1-D) system code is a challenging task. The System Analysis Module (SAM), a modern nuclear system code, has developed a coarse mesh multi-dimensional (multi-D) flow model to capture the spatial effect of T-F phenomena in advanced reactors. As a coarse mesh solver, constitutive relations are required for SAM's multi-D model for unresolved fine-scale physics, such as turbulence. Here this work presents a novel approach that integrates neural networks as data-driven closure for SAM's multi-D flow model. The data-driven closure is trained with fine-resolution data to ensure its accuracy while maintaining a coarse mesh setup to ensure its efficiency and consistency with SAM. We demonstrate the applicability of this SAM-ML capability in an open volume thermal stratification problem, where a neural network model serves as the eddy viscosity closure. A customized interface between the neural network and SAM is developed to ensure flexible and efficient data exchange. The SAM-ML results demonstrate superior performance compared to SAM's built-in zero-equation eddy viscosity closure. The case study shows that although the generalization capability of the data-driven closure still needs to be improved for different transient case or different geometric setup, SAM -ML demonstrates good potential for challenging simulation problems with improved accuracy and computational efficiency.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Search for CP violation in events with top quarks and Z bosons at $\sqrt{s}$ = 13 and 13.6 TeV

A search for the violation of the charge-parity (CP) symmetry in the production of top quarks in association with Z bosons is presented, using events with at least three charged leptons and additional jets. The search is performed in a sample of proton-proton collision data collected by the CMS experiment at the CERN LHC in 2016–2018 at a center-of-mass energy of 13 TeV and in 2022 at 13.6 TeV, corresponding to a total integrated luminosity of 173 fb –1 . For the first time in this final state, observables that are odd under the CP transformation are employed. Also for the first time, physics-informed machine-learning techniques are used to construct these observables. While for standard model (SM) processes the distributions of these observables are predicted to be symmetric around zero, CP-violating modifications of the SM would introduce asymmetries. Two CP-odd operators $\mathcal{O}$$^{I}_{tW}$ and $\mathcal{O}$$^{I}_{tZ}$ in the SM effective field theory are considered that may modify the interactions between top quarks and electroweak bosons. The obtained results are consistent with the SM prediction within two standard deviations, and exclusion limits on the associated Wilson coefficients of –2.7 < $c$$^{I}_{tW}$ < 2.5 and –0.2 < $c$$^{I}_{tZ}$ < 2.0 and are set at 95 % confidence level. The largest discrepancy is observed in $c$$^{I}_{tZ}$ where data is consistent with positive values, with an observed local significance with respect to the SM hypothesis of 2.5 standard deviations, when only linear terms are considered.

CMS↗
DOE OSTI2025

Autonomous Synthesis and Inverse Design of Electrochromic Polymers with High Efficiency and Accuracy

Here, the design and synthesis of functional polymers, aimed at targeted properties through specific structures, have long been challenged by their complex and often nonlinear structure–property relationships. Key processes, including knowledge accumulation for predictive design and experimental refinement and validation, are traditionally labor-insensitive and time-consuming, making it difficult to balance accuracy and efficiency. Here, we introduce an accelerated, autonomous system for the on-demand synthesis of electronic polymers that achieves the desired electrochromic functionality with high accuracy and efficiency. Our approach leverages large language model-assisted data mining, a physics-informed copolymer machine learning model, and an AI-driven autonomous robotic workflow in the Polybot lab. Within 72 h, Polybot autonomously synthesized electrochromic polymers (ECPs) with targeted, previously-unreported color values, including green polymers with specific absorption profiles, precisely fine-tuning copolymer structures with a 5% step size in comonomer composition within a three-monomer system. A publicly accessible ECP informatics database has also been created to foster knowledge exchange.

AI-driven Robotic Lab↗
DOE OSTI2023

Uncertainty Quantification for Multiphase Computational Fluid Dynamics Closure Relations with a Physics-Informed Bayesian Approach

Multiphase Computational Fluid Dynamics (MCFD) based on the two-fluid model is considered a promising tool to model complex two-phase flow systems. MCFD simulation can predict local flow features without resolving interfacial information. As a result, the MCFD solver relies on closure relations to describe the interaction between the two phases. Those empirical or semi-mechanistic closure relations constitute a major source of uncertainty for MCFD predictions. In this paper, we leverage a physics-informed uncertainty quantification (UQ) approach to inversely quantify the closure relations’ model form uncertainty in a physically consistent manner. This proposed approach considers the model form uncertainty terms as stochastic fields that are additive to the closure relation outputs. Combining dimensionality reduction and Gaussian processes, the posterior distribution of the stochastic fields can be effectively quantified within the Bayesian framework with the support of experimental measurements. As this UQ approach is fully integrated into the MCFD solving process, the physical constraints of the system can be naturally preserved in the UQ results. Here, in a case study of adiabatic bubbly flow, we demonstrate that this UQ approach can quantify the model form uncertainty of the MCFD interfacial force closure relations, thus effectively improving the simulation results with relatively sparse data support.

42 ENGINEERING↗
DOE OSTI2025

Tropical Cyclone Super Resolution using conditional diffusion denoising probabilistic model from mesoscale simulation to LES

Accurate modeling of tropical cyclone wind fields is essential for the design, risk assessment, and operational planning of offshore energy infrastructure. While mesoscale simulations are widely used thanks to their computational efficiency, they lack the necessary resolution to capture key features such as wind shear and veer profiles as well as the distribution turbulent kinetic energy (TKE). High-fidelity large-eddy simulation (LES) models on the other hand, can resolve turbulent structures and provide a more accurate representation of the complex wind field, albeit at a higher computational cost. To address this modeling gap, we introduce a two-part generative framework to enhance the resolution and physics-capturing ability of mesoscale simulations. First, a reduced-order model based on Karhunen–Loève (KL) decomposition is used to extract dominant spatial modes from one-dimensional mean wind profiles. A multilayer perceptron (MLP) is trained to map mesoscale mode weights to their LES counterparts, enabling accurate reconstruction of vertical velocity profiles. Second, a conditional Diffusion Denoising Probabilistic Model (DDPM) is developed to super-resolve coarse and low-fidelity mesoscale velocity fields, recovering fine-scale turbulence structures and stress distributions. The framework is evaluated across different tropical cyclone intensity categories defined by the Saffir–Simpson scale and demonstrates strong performance in both interpolation and extrapolation tasks. The generated fields accurately reproduce spatial coherence, stress distributions, and spectral energy characteristics observed in LES data. By bridging the fidelity gap between mesoscale and LES outputs, this approach offers a scalable, data-driven solution for enhancing the representation of tropical cyclone wind fields, enabling more robust offshore energy infrastructure systems design in tropical-cyclone-prone areas.

17 WIND ENERGY↗
DOE OSTI2026

Multibody for Everybody (M4E): A Symbolic Dynamics Modeling Tool with Applications in Simulation, Control, and Optimization

Developing the analytical model of a multibody system is often the initial step in control and optimization. The analytical model (equations of motion) describes a system’s time evolution under specified forcing conditions. Although developing these equations is easy for simple systems, this process becomes more complex for systems composed of multiple bodies. Deriving equations of motion for complex multibody systems requires specialized expertise in multibody dynamics, is time-consuming, and is susceptible to error. To address this issue, this paper presents an open-source, easy-to-use, systematic framework to derive symbolic equations of motion in both Python and MATLAB using the joint coordinate formulation. This formulation results in a set of ordinary differential equations that use the minimum set of coordinates needed to model a system. The symbolic representation provides better insight into the influence of design parameters on system performance, facilitates sensitivity analysis and parameter studies, and supports direct implementation of control and optimization routines. The tool enables numerical simulation for specified parameter sets, is modular for straightforward integration with other tools and libraries, and allows incorporation of hydrodynamics, mooring, and other external forces. The result is a reproducible, extensible pipeline for modeling, simulation, and design of complex multibody systems. The proposed tool is versatile and can be applied to domains such as robotics, control, and design. In addition, we integrated external libraries that provide capabilities for modeling offshore systems such as underwater robots and marine energy converters.

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

Eco-PiNN: A Physics-informed Neural Network for Eco-toll Estimation

The eco-toll estimation problem quantifies the expected environmental cost (e.g., energy consumption, exhaust emissions) for a vehicle to travel along a path. This problem is important for societal applications such as eco-routing, which aims to find paths with the lowest exhaust emissions or energy need. The challenges of this problem are threefold: (1) the dependence of a vehicle's eco-toll on its physical parameters; (2) the lack of access to data with eco-toll information; and (3) the influence of contextual information (i.e. the connections of adjacent segments in the path) on the eco-toll of road segments. Prior work on eco-toll estimation has mostly relied on pure data-driven approaches and has high estimation errors given the limited training data. To address these limitations, we propose a novel Eco-toll estimation Physics-informed Neural Network framework (Eco-PiNN) using three novel ideas, namely, (1) a physics-informed decoder that integrates the physical laws governing vehicle dynamics into the network, (2) an attention-based contextual information encoder, and (3) a physics-informed regularization to reduce overfitting. Experiments on real-world heavy-duty truck data show that the proposed method can greatly improve the accuracy of eco-toll estimation compared with state-of-the-art methods.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

On the Recoverability of Reactor Dynamics from Point Kinetics Data using SINDYc

Data driven models for reactor dynamics tend to face a few notable challenges. First, the broad range of timescales present across the various feedback mechanisms. Next, high standards for safety and importance of model performance in all operational domains. Finally, the correlations between state variables observed in most transients leads to difficulties when methods attempt to attribute certain dynamic phenomena to a particular cause. The current paper seeks to support efforts towards incorporating physics knowledge into one particular data-driven method for finding reactor dynamics called ``Sparse Identification of Nonlinear Dynamics with Control (SINDYc). The incorporation of physical knowledge into SINDYc will help address the challenges listed above by giving the model an initial understanding of the system being modeled. The demonstration of an exact representation of a set of point reactor dynamics equations in SINDYc is provided. Then, this allows for further discussion with mathematical justification as to why SINDYc, and other data-driven methods, may be difficult to apply to nuclear reactor dynamics due to correlations in the state variables. A particularly useful result of this work is the set of candidate functions required in SINDYc to exactly represent the reactor dynamics under a point approximation. In the future, SINDYc can be integrated with point models for reactor dynamics before being applied to the physical system to yield higher accuracy.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Surrogates for Valve-Controlled Pipe Flow: Accelerating Nuclear Reactor Design

Neural surrogate models are developed to replace expensive steady-state RANS CFD simulations for valve-controlled pipe flow in nuclear reactor design. Using parametric CFD data generated with MOOSE Pronghorn across a range of valve geometry and flow conditions, three approaches are compared: a POD-based reduced-order model, a structured UNet on a cylindrical grid, and unstructured models (DeepONet and BiStride MeshGraphNet) on nondimensionalized point clouds. POD achieves the highest accuracy (99%) with fast inference but requires storing all solution snapshots, while the DeepONet and BSMS-GNN both achieve ~89% accuracy at sub-second inference, with the BSMS-GNN offering superior geometric generalizability. These surrogates enable rapid ranking of candidate valve designs and can warm-start CFD solvers to accelerate convergence, supporting agentic design iteration on the Prometheus platform.

42 - ENGINEERING↗
DOE OSTI2025

Physics-informed transformation toward improving the machine-learned NLTE models of ICF simulations

The integration of machine-learning techniques into inertial confinement fusion (ICF) simulations has emerged as a powerful approach for enhancing computational efficiency. By replacing the costly nonlocal thermodynamic equilibrium (NLTE) model with machine-learning models, significant reductions in calculation time have been achieved. However, determining how to optimize machine-learning-based NLTE models in order to match ICF simulation dynamics remains challenging, underscoring the need for physically relevant error metrics and strategies to enhance model accuracy with respect to these metrics. Thus, we propose novel physics-informed transformations designed to emphasize energy transport, use these transformations to establish new error metrics, and demonstrate that they yield smaller errors within reduced principal-component spaces compared to conventional transformations. Published by the American Physical Society 2025

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

When physics-informed data analytics outperforms black-box machine learning: A case study in thickness control for additive manufacturing

Aerosol jet printing (AJP) has emerged as a promising noncontact additive manufacturing method for high-resolution printing for a wide range of material systems. A key challenge limiting the broader adoption of AJP in the material science community is the lack of methods to precisely control thickness. Herein, we develop a model-based design of experiment (MBDoE) framework that integrates physics-informed models, nonlinear regression, and information criteria to postulate, select and calibrate the best model to describe and optimize the AJP manufacturing process. Starting with already available data from system commissioning (e.g., prior single variable sensitivity analysis), four candidate physics-informed models are postulated and trained. MBDoE identifies a single additional optimal experiment to validate these predictive models with quantified uncertainties, which are then used to determine the best experimental conditions to control printed film thickness. As a comparative benchmark, the analysis is repeated using the same dataset with nonparametric Gaussian process regression (GPR) model that does not incorporate physical information. Using MBDoE principles, we find that only five experiments are necessary to calibrate the nonlinear physics-informed parametric model, and with said limited data, this model outperforms the black-box machine learning GPR model. This key result underscores an emerging trend in the data science community: incorporating physical information into predictive models often drastically reduces the data requirements. Leveraging MBDoE further increased the data efficiency. By design, the proposed data science framework is general in nature and can be easily extended to other experimental and additive manufacturing systems beyond AJP.

Aerosol jet printing↗
DOE OSTI2026

Physics vs structure: A systematic benchmark of learning strategies for multi-zone building thermal dynamics

Recent advances in physics-informed and data-driven machine learning promise improved thermal models for advanced building control, yet there is limited quantitative evidence on when added physics structure and architectural complexity are beneficial. Here, this work presents a systematic benchmark of five representative system identification methods for modeling multi-zone building thermal dynamics: linear state-space models, multi-layer perceptrons, neural state-space models, neural ordinary differential equations, and physically-consistent neural networks. The methods are evaluated across multiple data regimes and zone coupling strategies. Using a high-fidelity multi-zone commercial building emulator, we examine short-term and long-term prediction accuracy, computational efficiency, and ease of development. Our results reveal critical trade-offs between prediction performance, model complexity, and physical consistency. We demonstrate that decoupled, nonlinear black-box models consistently outperform coupled physics-constrained architectures in both predictive accuracy and out-of-distribution robustness in majority of the test cases for the building type considered in the study. Our findings quantify the cost of complexity in building thermal modeling and provide concrete, actionable, scenario-based guidelines for selecting model classes for control-oriented applications.

Building thermal modeling↗
DOE OSTI2022

Physics-informed CoKriging model of a redox flow battery

Vanadium redox flow batteries (VRFBs) offer the capability to store large amounts of energy cheaply and efficiently, however, there is a need for fast and accurate models of the charge–discharge curve of a VRFB to potentially improve the battery capacity and performance. Here, we develop a multifidelity model for predicting the charge–discharge curve of a VRFB. In the multifidelity model, we use the Physics-informed CoKriging (CoPhIK) machine learning method that is trained on experimental data and constrained by the so-called “zero-dimensional” physics-based model. Here we demonstrate that the model shows good agreement with experimental results and significant improvements over existing zero-dimensional models. We show that the proposed model is robust as it is not sensitive to the input parameters in the zero-dimensional model. We also show that only a small amount of high-fidelity experimental datasets are needed for accurate predictions for the range of considered input parameters, which include current density, flow rate, and initial concentrations.

25 ENERGY STORAGE↗
DOE OSTI2026

Decentralised Reinforcement Learning for Dynamic Cyberattack Response in Microgrid Networks

Microgrids rely on communication networks for reliable operation, which makes them inherently vulnerable to cyberattacks. Such attacks can destabilise system dynamics and drive states away from their nominal operating trajectories. Although several physics-informed and machine learning-based strategies have been developed to counter these threats, the rapidly evolving cyber landscape enables adversaries to bypass static defences or rules-based mitigation approaches. This paper proposes a dynamic, online-trained and fully decentralised reinforcement learning (RL)-based cyberattack response framework to protect microgrids from evolving cyberattacks. The proposed framework deploys multiple deep Q-networks (DQNs), each associated with a distributed energy resource (DER), to enable localised and adaptive attack mitigation. In this framework, each DQN processes local voltage and frequency measurements—combined with intrusion detection system (IDS) alerts—as observations and rewards to guide decision-making. Extensive simulation studies demonstrate the robustness of the proposed framework under diverse attack scenarios and varying IDS-induced detection delays. Comparative analysis highlights its superiority over existing static or preexisting rules-based mitigation approaches. Finally, we present an analysis that shows the framework's scalability to real-life microgrids with more interacting agents.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Technical Report for Bayesian Optimization and Reinforcement Learning for Beam Polarization Increase in the BNL Hadron Injectors

This project developed and evaluated physics-informed Bayesian learning and machine learning (ML)-based optimization methods for improving beam polarization preservation in the BNL hadron injector chain. The work focused on uncertainty-aware digital twin modeling, Bayesian calibration of accelerator simulations using beam measurements, and data-efficient optimization strategies including Bayesian optimization and reinforcement learning. These methods were applied to injector tuning and RF control problems in realistic accelerator settings to support improved operational robustness and readiness for RHIC operations and future Electron–Ion Collider facilities. No subject inventions were disclosed under this award.

43 PARTICLE ACCELERATORS↗