Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase change”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Multifidelity methods for uncertainty quantification of a nonlocal model for phase changes in materials

This study is devoted to the construction of a multifidelity Monte Carlo (MFMC) method for the uncertainty quantification of a nonlocal, non-mass-conserving Cahn-Hilliard model for phase transitions with an obstacle potential. Here, we are interested in estimating the expected value of an output of interest (OoI) that depends on the solution of the nonlocal Cahn-Hilliard model. As opposed to its local counterpart, the nonlocal model captures sharp interfaces without the need for significant mesh refinement. However, the computational cost of the nonlocal Cahn-Hilliard model is higher than that of its local counterpart with similar mesh refinement, inhibiting its use for outer-loop applications such as uncertainty quantification. The MFMC method augments the desired high-fidelity, high-cost OoI with a set of lower-fidelity, lower-cost OoIs to alleviate the computational burden associated with nonlocality. Most of the computational budget is allocated to sampling the cheap surrogate models to achieve speedup, whereas the high-fidelity model is sparsely sampled to maintain accuracy. For the non-mass-conserving nonlocal Cahn-Hilliard model, the use of the MFMC method results in, for a given computational budget, about an order of magnitude reduction in the mean-squared error of the expected value of the OoI relative to that of the Monte Carlo method.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Passive radiative thermal management using phase-change metasurfaces

Abstract Realizing innovative composite materials with passive thermal management capabilities and minimal ecological footprints is a challenging but much sought-after goal that would have a transformative effect on renewable energy sciences. We demonstrate an environmentally friendly metasurface utilizing vanadium dioxide (VO 2 ) that offers responsiveness to ambient temperature and potentially long-term stability. The metasurface enables passive thermal management by self-adjusting its absorptivity and emissivity response over a broad bandwidth ranging from visible to mid-infrared (IR) wavelengths. Above the VO 2 phase transition the metasurface exhibits increased mid-IR emissivity and reduced visible/near-IR absorptivity, creating an efficient radiative emission channel in the first atmospheric transparency window with reduced absorption of solar radiation. In contrast, below VO 2 ’s transition temperature, the metasurface increasingly absorbs sun light while minimizing mid-IR radiative heat losses. Moreover, a functional silicon layer eliminates the need for an additional capping layer commonly employed to protect VO 2 from environmental degradation. The additional protective layer often impedes the use and performance of VO 2 based devices in terrestrial as well as spacecraft applications. Therefore, the proposed durable and eco-friendly metasurface will be an excellent candidate for essential passive thermal regulation systems across residential and terrestrial applications.

42 ENGINEERING↗
DOE OSTI2025

Metallic 2D Janus SNbSe layers driven by a structural phase change

Synthesis of 2D metallic Janus SNbSe and SeNbS in 1T phase from 1H-phase NbS 2 and NbSe 2 , respectively, is achieved through using a room temperature plasma-assisted technique that induces a structural phase transition.

Wu, Cheng-Lun [Materials Science and Engineering, ↗
DOE OSTI2020

Resistance drift in Ge 2 Sb 2 Te 5 phase change memory line cells at low temperatures and its response to photoexcitation

Resistance drift in amorphous Ge 2 Sb 2 Te 5 is experimentally characterized in melt-quenched line cells in the range of 300 K to 125 K and is observed to follow the previously reported power-law behavior with drift coefficients in the range of 0.07 to 0.11 in the dark, linearly decreasing with 1/kT. While these drift coefficients measured in the dark are similar to commonly observed drift coefficients (~0.1) at and above room temperature, measurements under light show a significantly lower drift coefficient (0.05 under illumination vs 0.09 in the dark at 150 K). Periodic on/off switching of light shows a sudden decrease/increase in resistance, attributed to photo-excited carriers, followed by a very slow response (~30 min at 150 K) attributed to contribution of electron traps and slow trap-to-trap charge exchanges. A device-level electronic model is used to relate these experimental findings to gradual charging of electron traps in amorphous Ge 2 Sb 2 Te 5 , which gives rise to growth of a potential barrier for holes in time and, hence, resistance drift.

42 ENGINEERING↗
DOE OSTI2025

Assessment of thermally driven local structural phase changes in 1⁢𝑇′−MoTe 2

The role of layer disorder is important in establishing the topological phases of MoTe 2 . A rich tapestry of atomic ordering influences the structural phase transitions (SPTs), but there is little understanding of the mechanistic details of the phase transition. An atomistic level study was conducted to investigate the local structure of the 1⁢𝑇′ and 𝑇 𝑑 phases of MoTe 2 by using the pair distribution function (PDF) technique. While the average structure exhibits an SPT and coexistence of phases as a function of temperature, the local structure showed the suppression of SPT. The sample retained its monoclinic structure at all temperatures in short-range order. A sharp PDF peak observed at short distances indicated a strong atom-atom correlation between the Mo and Te atoms within the Mo octahedra. In addition, a large-box modeling of the PDF data indicated a preferential motion of Te atoms towards 𝑐 axis at all temperatures. Structural defects, such as stacking faults, likely result in the coexistence of phases in the average structure and suppress the local SPT of MoTe 2 . These results are stepping stones to understand the long-debated origins of structural, vibrational, and electronic properties of MoTe 2 and similar transition metal dichalcogenides.

2-dimensional systems↗
DOE OSTI2024

Voltage-induced magnetic domain evolution in a phase-change material

Applying voltage to metal–insulator transition (MIT) materials allows electrical actuation of the local electronic phase state. In MIT systems that have the electronic order coupled with the magnetic order, voltage switching of the electronic phase state can also enable the electrical manipulation of magnetic properties. In this work, we utilized x-ray magnetic circular dichroism photoemission electron microscopy (XMCD-PEEM) to investigate the control of magnetic domain configurations in ferromagnetic MIT electrical switches. For applied voltages above a threshold value, the XMCD-PEEM images show that the magnetic domains separate into two distinct regions: one with a high contrast (white/black), indicating well-defined micrometer-scale magnetic domains with a component of their magnetization aligned parallel/antiparallel to the x-ray helicity, and the other with different shades of intermediate contrast (gray). Significant changes in magnetic domain configurations upon voltage biasing were only observed in these gray regions. Furthermore, the voltage-induced magnetic domain separation was found to be bias polarity-dependent, with the gray regions expanding from the opposite sample edge when the applied voltage polarity was reversed. This polarity-dependent electrical control of magnetic domain configurations during the MIT switching opens alternative opportunities in memory applications for magnetic MIT switching materials.

42 ENGINEERING↗
DOE OSTI2021

Empirical prediction of saline water atomization pressure loss and spray phase change using local flow pressure analysis

A pressure analysis technique was developed to obtain spray spatial evaporation profile in a thermal desalination process. The technique can replace temperature-based evaporation measurement methods that are challenged by liquid-phase interference. It also provides an alternative to optical methods with high cost and complexity. Fundamental analysis was developed to determine local humidity ratios from changes in local static and dynamic pressures. The analysis was applied to data obtained from an external mixing air-assist atomizer. An empirical model was developed for the pressure loss in atomization process and was used in the analysis of humidity ratio. The results were used to develop empirical correlations for local humidity ratio in spray mediums using inlet conditions. Utilizing inlet conditions to predict evaporation profiles is an important contribution as it eliminates the need to take local spray measurements. Obtaining local data is often difficult and expensive; Our method and correlation circumvent the need for that. Finally, the correlations presented in this paper apply to saline water sprays with total dissolved salt of 0-10 wt%. The salinity-specific correlations are accurate to within ±10% of experimental data. The individual models were aggregated into a unified correlation for salinities within 0-10 wt%. The unified correlation is accurate to within ±18% of experimental data.

42 ENGINEERING↗
DOE OSTI2021

Mexican-hat potential energy surface in two-dimensional III 2 -VI 3 materials and the importance of entropy barrier in ultrafast reversible ferroelectric phase change

First-principles calculations reveal a Mexican-hat potential energy surface (PES) for two-dimensional (2D) In 2 Se 3 . This unique PES leads to a pseudo-centrosymmetric paraelectric β phase that resolves the current controversy between theory and experiment. We further show that while the α-to-β (ferroelectric-to-paraelectric) phase transition is fast and coherent, assisted by an in-plane shear phonon mode, a random distribution of the atoms in the trough of the PES acts as an entropy barrier against the reverse β-to-α transition. This will be the origin of the speed limitation of current In 2 Se 3 ferroelectric devices. Furthermore, if one orders the β phase (due to the formation of in-plane ferroelectric domains), the reverse transition can take place within tens of picoseconds in the presence of a perpendicular electric field. Finally, the Mexican-hat PES is a general feature for the entire family of 2D III 2 -VI 3 materials. Our finding offers a critical physical picture in controlling the ultrafast reversible phase transition in 2D In 2 Se 3 and other III 2 -VI 3 materials, which will benefit their practical industrial development for advanced ferroelectric devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Direct Laser Writing Crystal Polymorphs of Organic Semiconductors for Phase Change Electronics

The many diverse polymorphic behaviors observed in organic electronic materials offer opportunities to modulate electronic properties through reversibly switching crystal structures. Here, we access the prolific polymorphism observed in two-dimensional quinoidal terthiophene via laser writing to locally heat and direct the phase transitions. We access a metastable polymorph IV through rapid cooling and observe distinct symmetry as well as packing through grazing incidence X-ray diffraction (GIXD). Using our open-source PolyChemPrint patterning platform, we direct laser heating to initiate the IV-I transition, switching the conductance by >2 orders of magnitude. Here, this is confirmed via a combination of GIXD and Raman spectroscopy. Finally, we demonstrate switching of transistor devices as well as discrete tuning of conductance via laser writing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

High-efficiency optical limiter using metasurface and phase-change material

According to some aspects, a transmissive and all-dielectric optical component/limiter with great cutoff efficiency using Vanadium Dioxide (VO 2 ) as the active component is disclosed. In some embodiments, Vanadium dioxide is used for an optical limiter due to the large contrast in optical constants upon undergoing the semiconductor to metal phase transition. When triggered optically, this transition occurs within 60 fs, making the device suitable for an ultrafast laser environment. In addition, the phase transition threshold is tunable by applying stress or doping; therefore, the device cutoff intensity can be adjusted to fulfill specific requirements.

Valentine, Jason G.↗
DOE OSTI2021

An experimentally validated evaporative phase change heat transfer model for low mass flux applications using R134a in plate heat exchangers

Plate frame heat exchangers are common in liquid-coupled vapor compression systems due to their compactness and ease of maintenance. In some of these systems, the refrigerant within the evaporator can enter the heat exchanger as a subcooled liquid. As a result, the refrigerant passes through three different phases: single-phase liquid, two-phase fluid, and a superheated vapor. Unfortunately, there have been limited prior studies that have identified the best method to predict performance under these circumstances. Furthermore, previous investigations have not evaluated refrigerant evaporation in large industrial sized plate frame heat exchangers under conditions experienced in the present study experimental test facility, especially at mass fluxes below 7 kg m –2 s –1 . In the present investigation, a model was developed to predict the performance of plate and frame heat exchangers when the fluid enters as a subcooled liquid and exits as a superheated vapor. The model used full-sized plate heat exchanger geometry that was discretized into 20 sections to accurately capture local heat transfer and pressure drop effects. The model was validated using an R134a counter flow heat exchanger used in a turbo-compression cooling system test facility that had subcooled liquid entering the evaporator at low mass fluxes. A variety of empirical correlations were evaluated to determine what combination yielded the best predictive capability over the following range of conditions: 5.8 < G < 6.8 kg m –2 s –1 , 2 < q” < 2.8 kW m –2 , and 10 °C < T sat < 15 °C. When the correlations used a fixed control volume length in the heat flux calculation, the most accurate combination resulted in a mean absolute error of 5.5%. Finally, future studies can use the approach described here to optimize heat exchanger size and performance.

42 ENGINEERING↗