Results for “PROPELLANT ADDITIVE” — Page 10

NASA NTRS1980

Effect of silicone oil on solid propellant combustion in small motors

The feasibility of reducing troublesome nozzle blockage (by condensation deposits) in laboratory-scale solid rockets by addition of a silicone oil as a propellant ingredient was explored experimentally. An aluminized composite propellant and its counterpart with 1% silicone oil replacing part of the binder were fired in a 63.5 mm diameter, end-burning, all-metal burner. Pressure-time histories were recorded for all of the tests by a Taber gauge mounted at the downstream end of the chamber; temperature-time data at the nozzle throat were obtained in some of the runs by thermocouples having junctions positioned at the wall but insulated from the metal. Deposition of condensables on the nozzle walls causing a progressive increase in the chamber pressure with time was noted. The fraction of firings exhibiting practically no condensation was 59% with silicone and 32% without. On the average, temperature readings at the nozzle throat were higher with the silicone propellants. Although various phenomena may contribute to these findings, the results are not understood completely.

Ramohalli, K.↗

NASA NTRS1985

Some design philosophy for reducing the community noise of advanced counter-rotation propellers

Advanced counter-rotation propellers have been indicated as possibly generating an unacceptable amount of noise for the people living near an airport. This report has explored ways to reduce this noise level, which is treated as being caused by the interaction of the upstream propeller wakes and vortices with the downstream propeller. The noise reduction techniques fall into two categories: (1) reducing the strength of the wakes and vortices, and (2) reducing the response of the downstream blades to them. The noise from the wake interaction was indicated as being reduced by increased propeller spacing and decreased blade drag coefficient. The vortex-interaction noise could be eliminated by having the vortex pass over the tips of the downstream blade, and it could be reduced by increased spacing or decreased initial circulation. The downstream blade response could be lessened by increasing the reduced frequency parameter omega or by phasing of the response from different sections to have a mutual cancellation effect. Uneven blade to blade spacing for the downstream blading was indicated as having a possible effect on the annoyance of counter-rotation propeller noise. Although there are undoubtedly additional methods of noise reduction not covered in this report, the inclusion of the design methods discussed would potentially result in a counter-rotation propeller that is acceptably quiet.

Dittmar, J. H.↗

NASA NTRS2007

Electromagnetic Pumps for Liquid Metal-Fed Electric Thrusters

Prototype designs of two separate pumps for use in electric propulsion systems with liquid lithium and bismuth propellants are presented. Both pumps are required to operate at elevated temperatures, and the lithium pump must additionally withstand the corrosive nature of the propellant. Compatibility of the pump materials and seals with lithium and bismuth were demonstrated through proof-of-concept experiments followed by post-experiment visual inspections. The pressure rise produced by the bismuth pump was found to be linear with input current and ranged from 0-9 kPa for corresponding input current levels of 0-30 A, showing good quantitative agreement with theoretical analysis.

Polzin, Kurt A.↗

NASA NTRS1972

Experimental investigation of a throttlable 15 cm hollow cathode ion thruster

The use of dished high perveance grids on a 15 cm modified SERT 2 thruster is shown to facilitate throttled operation over a beam current range from 60 to 600 mA. Effects of increasing the radial component of the magnetic field in the main discharge chamber and decreasing the dimensions of the cathode discharge region are examined and found to degrade performance to the extent that primary electrons are forced in toward the center-line of the thruster. Studies of the baffle aperture region of two thrusters indicate that the electric potential gradient vector is perpendicular to the local magnetic field lines when the thruster is operating properly. The correlation between the shape of the ion beam current density and that of the ion density at the screen grid within the thruster is shown to be 94%. Additional experimental studies on maximum propellant utilization, plasma ion production cost, neutral density in the cathode discharge region, double ion production in hollow cathode thrusters and thermal flow meter performance are discussed.

Wilbur, P. J.↗

NASA NTRS1975

Mariner Jupiter/Saturn 1977 navigation strategy

This paper presents selected navigational aspects of the Mariner Jupiter/Saturn 1977 mission. Emphasis is given to the trajectory correction strategy. In addition to science return and propellant costs, specific considerations affecting the strategy include a large number of candidate trajectories, relatively close satellite flybys, use of trajectory correction maneuvers for trajectory shaping, and the requirement for an optical data type to achieve precision satellite encounters. Finally, important error sources and mission constraints are identified, and their impact on the strategy is discussed.

Mckinley, E. L.↗

NASA NTRS1975

Earliest abort once around time for the first orbital flight test mission

The earliest abort once around (AOA) time for the first orbital flight test (OFT-1) mission is determined. The latest estimates of vehicle weights and propulsion for OFT-1 are used. Trade analyses to indicate variations in AOA time for shuttle subsystem changes (such as orbital maneuvering system (OMS) or reaction control system (RCS) propellant loadings) are included. In addition, the effects of first stage attitude steering as a function of relative velocity for a nominal profile are presented. Data are presented to indicate the effect of designing first stage steering for earliest AOA time and then having engine out at times after the design point.

Kuhn, A. E.↗

NASA NTRS1983

Analysis and test for space shuttle propellant dynamics

This report presents the results of a study to develop an analytical model capable of predicting the dynamic interaction forces on the Shuttle External Tank, due to large amplitude propellant slosh during RTLS separation. The report details low-g drop tower and KC-135 test programs that were conducted to investigate propellant reorientation during RTLS. In addition, the development of a nonlinear finite element slosh model (LAMPS2, two dimensional, and one LAMPS3, three dimensional) is presented. Correlation between the model and test data is presented as a verification of the modeling approach.

Berry, R. L.↗

NASA NTRS1991

Anode power deposition in an applied-field segmented anode MPD thruster

Anode heat flux measurements of a water cooled segmented anode applied-field MPD thruster were made to investigate anode heat transfer phenomena. Pure argon and argon-hydrogen mixtures were used as propellants for a variety of thruster currents, propellant mass flow rates, and axial applied magnetic field strengths. The thruster was operated in two modes; with all four segments active, and with two of the segments floating. In addition, thrust and specific impulse were determined for each operating condition. The results show that the heat flux to the anode increases monotonically with axial magnetic field strength and thruster current. Between 50 and 75 percent of the anode heat flux is transported by the current carrying electrons. Convective and radiative heat transfer account for the remaining portion of the power deposited in the anode. The addition of hydrogen to the argon propellant results in the reduction of the fraction of anode power deposited by the anode fall to a level equivalent to that deposited by convection and radiation.

Myers, R. M.↗

NASA NTRS1990

Space Station transportation node concepts and analysis

Accommodation of the new Human Exploration Initiative being developed by NASA requires Space Station Freedom to serve three major roles: first, as a facility for precursory technology development and life sciences research for both transportation systems and lunar/Mars outpost systems; second, as a transportation node capable of processing both lunar- and Mars-class transportation vehicles and their accompanying payloads. This processing includes all required initial vehicle assembly, mating, servicing, refurbishment, and repair. In addition, some amount of mission propellant may be stored and transferred on Freedom. Third, Freedom provides an ideal test bed for developing operational techniques that are applicable to the Human Exploration Initiative missions. The work performed under this task and presented in this briefing serves to define and prepare Space Station Freedom evolution in keeping with the mission needs stated above by: defining Freedom transportation node evolution configurations consistent with user requirements and program constraints; defining and incorporating baseline design accommodations (hardware 'scars' and software 'hooks') to satisfy evolution requirements; and identifying advanced technology that will enhance Freedom's capabilities and enables its evolution.

Cirillo, William↗

NASA NTRS2004

AsterAnts: A Concept for Large-Scale Meteoroid Return and Processing using the International Space Station

AsterAnts is a concept calling for a fleet of solar sail powered spacecraft to retrieve large numbers of small (1/2-1 meter diameter) Near Earth Objects (NEOs) for orbital processing. AsterAnts could use the International Space Station (ISS) for NEO processing, solar sail construction, and to test NEO capture hardware. Solar sails constructed on orbit are expected to have substantially better performance than their ground built counterparts [Wright 1992]. Furthermore, solar sails may be used to hold geosynchronous communication satellites out-of-plane [Forward 1981] increasing the total number of slots by at least a factor of three. potentially generating $2 billion worth of orbital real estate over North America alone. NEOs are believed to contain large quantities of water, carbon, other life-support materials and metals. Thus. with proper processing, NEO materials could in principle be used to resupply the ISS, produce rocket propellant, manufacture tools, and build additional ISS working space. Unlike proposals requiring massive facilities, such as lunar bases, before returning any extraterrestrial larger than a typical inter-planetary mission. Furthermore, AsterAnts could be scaled up to deliver large amounts of material by building many copies of the same spacecraft, thereby achieving manufacturing economies of scale. Because AsterAnts would capture NEOs whole, NEO composition details, which are generally poorly characterized, are relatively unimportant and no complex extraction equipment is necessary. In combination with a materials processing facility at the ISS, AsterAnts might inaugurate an era of large-scale orbital construction using extraterrestrial materials.

Globus, Al↗

NASA NTRS2012

Five-Segment Solid Rocket Motor Development Status

In support of the National Aeronautics and Space Administration (NASA), Marshall Space Flight Center (MSFC) is developing a new, more powerful solid rocket motor for space launch applications. To minimize technical risks and development costs, NASA chose to use the Space Shuttle s solid rocket boosters as a starting point in the design and development. The new, five segment motor provides a greater total impulse with improved, more environmentally friendly materials. To meet the mass and trajectory requirements, the motor incorporates substantial design and system upgrades, including new propellant grain geometry with an additional segment, new internal insulation system, and a state-of-the art avionics system. Significant progress has been made in the design, development and testing of the propulsion, and avionics systems. To date, three development motors (one each in 2009, 2010, and 2011) have been successfully static tested by NASA and ATK s Launch Systems Group in Promontory, UT. These development motor tests have validated much of the engineering with substantial data collected, analyzed, and utilized to improve the design. This paper provides an overview of the development progress on the first stage propulsion system.

Priskos, Alex S.↗

NASA NTRSDate not supplied

Analysis of Alternative Architectures for a 2024 Lunar Sortie

This study focused on performing a broad analysis of lunar architectures to identify key alternatives capable of performing a 2024 human lunar landing mission. The goal of the study was to identify architecture alternatives which exhibit robustness, as measured by launch vehicle payload margin, to absorb the natural growth that occurs during design maturation. The study consisted of up to three element architectures which perform the mission from cis-lunar aggregation, through the surface sortie, and return to cis-lunar space. More than 600,000 data points were evaluated utilizing a novel architecture synthesis framework currently being developed by NASA/MSFC. Key findings from the study indicate that architecture complexity can be reduced by minimizing the number of discrete, unique architecture elements, which in turn translates into reduced design, development, test, and evaluation (DDT&E) complexity. It was identified that heavy lift launch vehicles enable such architectures while also providing significant increases to launch vehicle margin over existing and near-term commercial launch vehicle (CLV) performance expected in the 2024 time frame. Additionally, the study identified storable propellant based lander architectures as leading alternatives in achieving a 2024 human lunar landing by providing reduced technology needs and development schedules.

Architecture Analysis↗

NASA NTRSDate not supplied

Aerocapture Enabling Uranus Orbiter and Probe Mission

Exploration of the Ice Giants, especially Uranus, via orbiter and atmospheric probes, is required to answer pressing science questions that have been raised in the latest Decadal Survey. Due to the distance the Ice Giants planets are from Earth, traditional fully-propulsive orbit insertion missions have transit times to these planetary bodies nearing 13-15 years. Additionally, a large amount of propellant mass (60-70% of total launch mass) for the orbit insertion maneuver is required, leaving less mass for the scientific payload and a planetary probe.

Rohan Deshmukh↗

NASA NTRSDate not supplied

NASA's X-57 High Lift Motor Controller: Detailed Design, Test Results, and Outcomes

NASA's X-57 all-electric aircraft was a research project aimed at investigating lightweight and efficient electric propulsion components. The general approach was to utilize a distributed electric propulsion (DEP) design. An essential component of this design was the High Lift Motor Controller (HLMC), a motor drive which provided power to the High Lift Motors (HLMs) and High Lift Propellers (HLPs) responsible for providing additional thrust for take-off and landing. This paper presents the detailed design, test results, and outcomes from the development of the HLMC, a 14 kW, 1kg, 98.3% efficient, outer mold line (OML) cooled, silicon carbide (SiC) MOSFET-based inverter and controller.

Electric Aircraft↗

NASA NTRS2024

NASA's X-57 High Lift Motor Controller: Detailed Design, Test Results, and Outcomes

NASA's X-57 all-electric aircraft was a research project aimed at investigating lightweight and efficient electric propulsion components. The general approach was to utilize a distributed electric propulsion (DEP) design. An essential component of this design was the High Lift Motor Controller (HLMC), a motor drive which provided power to the High Lift Motors (HLMs) and High Lift Propellers (HLPs) responsible for providing additional thrust for take-off and landing. This paper presents the detailed design, test results, and outcomes from the development of the HLMC, a 14 kW, 1kg, 98.3% efficient, outer mold line (OML) cooled, silicon carbide (SiC) MOSFET-based inverter and controller.

Electric Aircraft↗

NASA NTRSDate not supplied

Feasibility and Utility of a Cryogenic Integrated RCS

Traditional in-space propulsion systems use storable propellants, such as MMH/NTO, for applications beyond Low Earth Orbit (LEO). Modern advancements in Cryogenic Fluid Management (CFM) technologies opens the door for use of more efficient cryogenic propellants, such as LOX/LCH4 or LOX/LH2, in these long-duration missions beyond LEO. As these Main Propulsion Systems (MPS) transition to cryogenic propellants, a cryogenic solution for Reaction Control Systems (RCS) becomes attractive for several reasons. A mixed-fluid vehicle solution with cryogenic (cool) MPS and storable (warm) RCS complicates thermal management. Additionally, a vehicle with common cryogenic propellant across the MPS and RCS could take advantage of shared hardware such as tanks, thermal management equipment, and pressurization system, reducing mass and development time. The fluid system design proposed in this presentation features shared hardware, leading to the designation of Cryogenic Integrated Reaction Control System (iRCS). The iRCS design stores cryogenic propellant in the low-pressure (10’s psia) MPS tanks, creates steady high-pressure (100’s psia) flow through an electric pump (e-pump), feeds pulse-firing RCS thrusters, and returns any excess flow to the tank through a pressure control device on a recirculation line. This iRCS design is inspired by the automotive fuel-rail, where similar elevated-pressure and pulse-firing requirements are levied. This design has several inherent advantages. Because this design is pump-fed rather than pressure-fed, heavy, high-pressure propellant storage is not required. The RCS propellant can therefore be stored by increasing MPS tank volume. Furthermore, by increasing the pressure of the circulated fluid through an e-pump, the propellant quality moves further into the sub-cooled regime. Sub-cooled liquid is desirable for accurate pressure and flow control at the thruster inlet. Lastly, the iRCS allows the distribution system hardware to maintain cryogenic temperatures by slowly recirculating liquid in a low-energy “Idle Mode”. Altogether, the iRCS concept enables a more efficient cryogenic vehicle design.

Integrated Reaction Control System↗

NASA NTRSDate not supplied

Feasibility and Utility of a Cryogenic Integrated RCS

Traditional in-space propulsion systems use storable propellants, such as MMH/NTO, for applications beyond Low Earth Orbit (LEO). Modern advancements in Cryogenic Fluid Management (CFM) technologies opens the door for use of more efficient cryogenic propellants, such as LOX/LCH4 or LOX/LH2, in these long-duration missions beyond LEO. As these Main Propulsion Systems (MPS) transition to cryogenic propellants, a cryogenic solution for Reaction Control Systems (RCS) becomes attractive for several reasons. A mixed-fluid vehicle solution with cryogenic (cool) MPS and storable (warm) RCS complicates thermal management. Additionally, a vehicle with common cryogenic propellant across the MPS and RCS could take advantage of shared hardware such as tanks, thermal management equipment, and pressurization system, reducing mass and development time. The fluid system design proposed in this presentation features shared hardware, leading to the designation of Cryogenic Integrated Reaction Control System (iRCS). The iRCS design stores cryogenic propellant in the low-pressure (10’s psia) MPS tanks, creates steady high-pressure (100’s psia) flow through an electric pump (e-pump), feeds pulse-firing RCS thrusters, and returns any excess flow to the tank through a pressure control device on a recirculation line. This iRCS design is inspired by the automotive fuel-rail, where similar elevated-pressure and pulse-firing requirements are levied. This design has several inherent advantages. Because this design is pump-fed rather than pressure-fed, heavy, high-pressure propellant storage is not required. The RCS propellant can therefore be stored by increasing MPS tank volume. Furthermore, by increasing the pressure of the circulated fluid through an e-pump, the propellant quality moves further into the sub-cooled regime. Sub-cooled liquid is desirable for accurate pressure and flow control at the thruster inlet. Lastly, the iRCS allows the distribution system hardware to maintain cryogenic temperatures by slowly recirculating liquid in a low-energy “Idle Mode”. Altogether, the iRCS concept enables a more efficient cryogenic vehicle design.

Integrated↗

NASA NTRS1973

Centaur D-1T propulsion and propellant systems

A description is presented of the propulsion and propellant systems of the Centaur D-1T, an improved version of the Centaur high energy upper state. The primary change to the propulsion system to provide three-burn capability was the addition of radiation shielding to the propellant duct. The redundant valves and feed paths were added to the H202 supply and reaction control system to increase system tolerance to the most probable causes of failure. Other changes were made to enhance mission capability of the Centaur, and represent an increase in inherent reliability of the vehicle through reduction of single failure points and by substitution of more reliable components.

Goette, W. E.↗