Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROPANE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Critical evaluation of Jet-A spray combustion using propane chemical kinetics in gas turbine combustion simulated by KIVA-2

Jet-A spray combustion has been evaluated in gas turbine combustion with the use of propane chemical kinetics as the first approximation for the chemical reactions. Here, the numerical solutions are obtained by using the KIVA-2 computer code. The KIVA-2 code is the most developed of the available multidimensional combustion computer programs for application of the in-cylinder combustion dynamics of internal combustion engines. The released version of KIVA-2 assumes that 12 chemical species are present; the code uses an Arrhenius kinetic-controlled combustion model governed by a four-step global chemical reaction and six equilibrium reactions. Researchers efforts involve the addition of Jet-A thermophysical properties and the implementation of detailed reaction mechanisms for propane oxidation. Three different detailed reaction mechanism models are considered. The first model consists of 131 reactions and 45 species. This is considered as the full mechanism which is developed through the study of chemical kinetics of propane combustion in an enclosed chamber. The full mechanism is evaluated by comparing calculated ignition delay times with available shock tube data. However, these detailed reactions occupy too much computer memory and CPU time for the computation. Therefore, it only serves as a benchmark case by which to evaluate other simplified models. Two possible simplified models were tested in the existing computer code KIVA-2 for the same conditions as used with the full mechanism. One model is obtained through a sensitivity analysis using LSENS, the general kinetics and sensitivity analysis program code of D. A. Bittker and K. Radhakrishnan. This model consists of 45 chemical reactions and 27 species. The other model is based on the work published by C. K. Westbrook and F. L. Dryer.

Nguyen, H. L.↗

Performance of an Experimental Annular Turbojet Combustor with Methane and Propane

Combustion efficiencies obtained with gaseous methane were compared with reported data obtained with gaseous propane for the same experimental combustor configuration. The combustion efficiencies obtained with methane were 98, 91, and 77 percent at simulated flight altitudes of 56,000, 70,000 and 80,000 feet, corresponding to combustor inlet-air pressures from 15 to 5 inches of mercury absolute. Combustion efficiencies with propane were equivalent to those with methane up to a simulated altitude of 70,000 feet. At the most severe conditions investigated propane operated with a higher efficiency and over a wider range of fuel-air ratio than methane.

Norgren, Carl T↗

Update from the Analysis of High Resolution Propane Spectra and the Interpretation of Titan's Infrared Spectra

Titan has an extremely thick atmosphere dominated by nitrogen, but includes a range of trace species such as hydrocarbons and nitriles. One such hydrocarbon is propane (C3H8). Propane has 21 active IR bands covering broad regions of the mid-infrared. Therefore, its ubiquitous signature may potentially mask weaker signatures of other undetected species with important roles in Titan's chemistry. Cassini's Composite Infrared Spectrometer (CIRS) observations of Titan's atmosphere hint at the presence of such molecules. Unfortunately, C3H8 line atlases for the vibration bands V(sub 8), V(sub 21), V(sub 20), and V(sub 7) (869, 922, 1054, and 1157 per centimeter, respectively) are not currently available for subtracting the C3H8 signal to reveal, or constrain, the signature of underlying chemical species. Using spectra previously obtained by Jennings, D. E., et al. at the McMath-Pierce FTIR at Kitt Peak, AZ, as the source and automated analysis utilities developed for this application, we are compiling an atlas of spectroscopic parameters for propane that characterize the ro-vibrational transitions in the above bands. In this paper, we will discuss our efforts for inspecting and fitting the aforementioned bands, present updated results for spectroscopic parameters including absolute line intensities and transition frequencies in HITRAN and GEISA formats, and show how these optical constants will be used in searching for other trace chemical species in Titan's atmosphere. Our line atlas for the V(sub 21) band contains a total number of 2971 lines. The band integrated strength calculated for the V(sub 21) band is 1.003 per centimeter per (centimeter-atm).

Klavans, V.↗

Kinetics of Hydrogen Oxidation Downstream of Lean Propane and Hydrogen Flames

The decay of hydrogen was measured downstream of lean, flat, premixed hydrogen and propane-air flames seated on cooled porous burners. Experimental variables included temperature, pressure, initial equivalence ratio and diluent. Sampling of burned gas was done through uncooled quartz orifice probes, and the analysis was based on gas chromatography. An approximate treatment of the data in which diffusion was neglected led to the following rate expression for the zone downstream of hydrogen flames d[H (sub 2)] divided by (d times t) equals 1.7 times 10 (sup 10) [H (sub 2)] (sup 3) divided by (sub 2) [O (sub 2)]e (sup (-8100 divided by RT)) moles per liters per second. On the basis of a rate expression of this form, the specific rate constant for the reaction downstream of hydrogen flames was about three times as great as that determined downstream of propane flames. This result was explained on the basis of the existence of a steady state between hydrogen and carbon monoxide in the burned gas downstream of propane flames.

Fine, Burton↗

Infrared spectra and optical constants of astronomical ices: III. Propane, propylene, and propyne

Infrared (IR) spectra of the hydrocarbon ices C3H8 (propane), C3H6 (propylene, propene), and C3H4 (propyne, methylacetylene) are relevant to the study of the low-temperature chemistry and spectroscopy of objects within and beyond the Solar System, but IR band strengths and absorption coefficients are lacking for these compounds. Here we present new IR spectra of crystalline and non-crystalline forms of C3H8, C3H6, and C3H4. Measurements of ice density and refractive index also are reported, two quantities needed to compute IR absorption coefficients, band strengths, optical constants, and, ultimately, abundances of propane, propylene, and propyne in extraterrestrial environments and in laboratory experiments. Suggestions and interpretations are offered regarding the multiple crystalline forms of propane and propylene observed. Applications and extensions are described.

Reggie L. Hudson↗

Infrared Spectra and Optical Constants of Astronomical Ices: III. Propane, Propylene, and Propyne

Infrared (IR) spectra of the hydrocarbon ices C3H8 (propane), C3H6 (propylene, propene), and C3H4 (propyne, methylacetylene) are relevant to the study of the low-temperature chemistry and spectroscopy of objects within and beyond the Solar System, but IR band strengths and absorption coefficients are lacking for these compounds. Here we present new IR spectra of crystalline and non-crystalline forms of C3H8, C3H6, and C3H4. Measurements of ice density and refractive index also are reported, two quantities needed to compute IR absorption coefficients, band strengths, optical constants, and, ultimately, abundances of propane, propylene, and propyne in extraterrestrial environments and in laboratory experiments. Suggestions and interpretations are offered regarding the multiple crystalline forms of propane and propylene observed. Applications and extensions are described.

Ices↗

Infrared spectra and optical constants of astronomical ices: III. Propane, propylene, and propyne

Infrared (IR) spectra of the hydrocarbon ices C3H8 (propane), C3H6 (propylene, propene), and C3H4 (propyne, methylacetylene) are relevant to the study of the low-temperature chemistry and spectroscopy of objects within and beyond the Solar System, but IR band strengths and absorption coefficients are lacking for these compounds. Here we present new IR spectra of crystalline and non-crystalline forms of C3H8, C3H6, and C3H4. Measurements of ice density and refractive index also are reported, two quantities needed to compute IR absorption coefficients, band strengths, optical constants, and, ultimately, abundances of propane, propylene, and propyne in extrater-restrial environments and in laboratory experiments. Suggestions and interpretations are offered regarding the multiple crystalline forms of propane and propylene observed. Applications and extensions are described.

Reggie L. Hudson↗

Infrared Spectra and Optical Constants of Astronomical Ices: III. Propane, Propylene, and Propyne

Infrared (IR) spectra of the hydrocarbon ices C3H8 (propane), C3H6 (propylene, propene), and C3H4 (propyne, methylacetylene) are relevant to the study of the low-temperature chemistry and spectroscopy of objects within and beyond the Solar System, but IR band strengths and absorption coefficients are lacking for these compounds. Here we present new IR spectra of crystalline and non-crystalline forms of C3H8, C3H6, and C3H4. Measurements of ice density and refractive index also are reported, two quantities needed to compute IR absorption coefficients, band strengths, optical constants, and, ultimately, abundances of propane, propylene, and propyne in extraterrestrial environments and in laboratory experiments. Suggestions and interpretations are offered regarding the multiple crystalline forms of propane and propylene observed. Applications and extensions are described.

Reggie L Hudson↗

Costs Associated With Propane Vehicle Fueling Infrastructure

This document is designed to help fleets understand the cost factors associated with propane vehicle fueling infrastructure. It provides an overview of the equipment and processes necessary to develop a propane fueling station and offers estimated cost ranges.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Vanadium oxide based nanostructured materials for catalytic oxidative dehydrogenation of propane : effect of heterometallic centers on the catalyst performance.

Catalytic properties of a series of new class of catalysts materials-[Co{sub 3}(H{sub 2}O){sub 12}V{sub 18}O{sub 42} (XO{sub 4})].24H{sub 2}O (VNM-Co), [Fe{sub 3}(H{sub 2}O){sub 12}V{sub 18}O{sub 42}(XO{sub 4})].24H{sub 2}O (VNM-Fe) (X = V, S) and [H{sub 6}Mn{sub 3}(H{sub 2}O){sub 12}V{sub 18}O{sub 42}(VO{sub 4})].30H{sub 2}O for the oxidative dehydrogenation of propane is studied. The open-framework nanostructures in these novel materials consist of three-dimensional arrays of {l_brace}V{sub 18}O{sub 42}(XO{sub 4}){r_brace} (X = V, S) clusters interconnected by {l_brace}-O-M-O-{r_brace} (M = Mn, Fe, Co) linkers. The effect of change in the heterometallic center M (M = Mn, Co, Fe) of the linkers on the catalyst performance was studied. The catalyst material with Co in the linker showed the best performance in terms of propane conversion and selectivity at 350 C. The material containing Fe was most active but least selective and Mn containing catalyst was least active. The catalysts were characterized by Temperature Programmed Reduction (TPR), BET surface area measurement, Diffuse Reflectance Infrared Fourier Transform Spectroscopy, and X-ray Absorption Spectroscopy. TPR results show that all three catalysts are easily reducible and therefore are active at relatively low temperature. In situ X-ray absorption near edge spectroscopy (XANES) and extended X-ray absorption fine structure spectroscopy (EXAFS) studies revealed that the oxidation state of Co(II) remained unchanged up to 425 C (even after pretreatment). The reduction of Co(II) into metallic form starts at 425 C and this process is completed at 600 C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Boosting catalytic propane oxidation over PGM-free Co 3 O 4 nanocrystal aggregates through chemical leaching: A comparative study with Pt and Pd based catalysts

Rational modification of interfacial structure and chemistry can help effectively tailor the reactivity and stability of heterogeneous catalysts regardless of their elemental or compound natures. In this work, a diluted acidic treatment was designed and utilized to modify the surface structure and chemistry of spinel Co 3 O 4 nanoparticles. Such a chemical leaching strategy has significantly promoted the propane oxidation activity of the PGM-free Co 3 O 4 nanocrystal aggregates. With a much higher activity than the commercial Al 2 O 3 supported Pt and Pd catalysts, these leached nanoparticle aggregates exhibited much more abundant defects, surface Co 2+ and chemisorbed oxygen species. Such surface-modified Co 3 O 4 nanocatalysts have displayed excellent and stable propane oxidation efficiency independent of both O 2 and C 3 H 8 concentrations, where the activities of both commercial Pt (or Pd)/Al 2 O 3 and self-made Pt (or Pd)/CeO 2 catalysts were greatly affected by different O 2 and C 3 H 8 concentrations. Meanwhile, the Co 3 O 4 nanocrystal aggregates catalyst exhibited good performance in presence of water or sulfur dioxide. This facile chemical leaching based technique provides a potential means to make highly active and stable oxide catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Propane Dehydrogenation on Single-Site [PtZn4] Intermetallic Catalysts

Propane dehydrogenation (PDH) is a commercial propylene production technology that has received much attention, but high reaction temperature results in decrease of propylene selectivity and catalyst stability. This paper describes a single-site [PtZn 4 ] catalyst by assembling atomically ordered intermetallic alloy (IMA) as a selective and ultrastable PDH catalyst. The catalyst enables more than 95% propylene selectivity from 520 to 620 oC. No obvious deactivation is observed within 160-hours test, superior to PtSn/Al 2 O 3 and state-of-the-art Pt-based catalysts. Additionally, based on in situ X-ray absorption fine-structure, X-ray photoelectron spectroscopy measurements and density functional theory calculations, we reveal that the surface [PtZn 4 ] ensembles in PtZn IMAs serve as the key active site structures, wherein the geometry-isolated and electron-rich Pt1 site in [PtZn 4 ] ensembles readily promotes the first and second C–H cleavage of propane, but inhibits further dehydrogenation of surface-bounded propylene. This significantly improves the selectivity and stability by prohibiting coke side reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiscale Informatics for Low-Temperature Propane Oxidation: Further Complexities in Studies of Complex Reactions

We have developed a multi-scale approach (Burke, M. P.; Klippenstein, S. J.; Harding, L. B. Proc. Combust. Inst. 2013, 34, 547–555.) to kinetic model formulation that directly incorporates elementary kinetic theories as a means to provide reliable, physics-based extrapolation to unexplored conditions. Here, we extend and generalize the multi-scale modeling strategy to treat systems of considerable complexity – involving multi-well reactions, potentially missing reactions, non-statistical product branching ratios, and non-Boltzmann (i.e. non-thermal) reactant distributions. The methodology is demonstrated here for a subsystem of low-temperature propane oxidation, as a representative system for low-temperature fuel oxidation. A multi-scale model is assembled and informed by a wide variety of targets that include ab initio calculations of molecular properties, rate constant measurements of isolated reactions, and complex systems measurements. Active model parameters are chosen to accommodate both “parametric” and “structural” uncertainties. Theoretical parameters (e.g. barrier heights) are included as active model parameters to account for parametric uncertainties in the theoretical treatment; experimental parameters (e.g. initial temperatures) are included to account for parametric uncertainties in the physical models of the experiments. RMG software is used to assess potential structural uncertainties due to missing reactions. Additionally, branching ratios among product channels are included as active model parameters to account for structural uncertainties related to difficulties in modeling sequences of multiple chemically activated steps. The approach is demonstrated here for interpreting time-resolved measurements of OH, HO2, n-propyl, i-propyl, propene, oxetane, and methyloxirane from photolysis-initiated low-temperature oxidation of propane at pressures from 4 to 60 Torr and temperatures from 300 to 700 K. In particular, the multi-scale informed model provides a consistent quantitative explanation of both ab initio calculations and time-resolved species measurements. The present results show that interpretations of OH measurements are significantly more complicated than previously thought – in addition to barrier heights for key transition states considered previously, OH profiles also depend on additional theoretical parameters for R + O2 reactions, secondary reactions, QOOH + O2 reactions, and treatment of non-Boltzmann reaction sequences. Extraction of physically rigorous information from those measurements may require more sophisticated treatment of all of those model aspects, as well as additional experimental data under more conditions, to discriminate among possible interpretations and ensure model reliability. Keywords: Optimization, Uncertainty quantification, Chemical mechanism, Low-Temperature Oxidation, Non-Boltzmann

Chemical mechanism↗

Pore-Space Partition and Optimization for Propane-Selective High-Performance Propane/Propylene Separation

The development of effective propane (C 3 H 8 )-selective adsorbents for the purification of propylene (C 3 H 6 ) from C 3 H 8 /C 3 H 6 mixture is a promising alternative to replace the energy-intensive cryogenic distillation. However, few materials possess the dual desirable features of propane selectivity and high uptake capacity. Here, we report a family of pore-space-partitioned crystalline porous materials (CPM) with remarkable C 3 H 8 uptake capacity (up to 10.9 mmol/g) and the highly desirable, yet uncommon C 3 H 8 selectivity (up to 1.54 at 0.1 bar and 1.44 at 1bar). The selectivity-capacity synergy endows them with record-performing C 3 H 8 /C 3 H 6 separation potential (i.e., C 3 H 6 recovered from the mixture). Moreover, these CPMs exhibit outstanding properties including high stability, low regeneration energy, and multi-modular chemical and geometrical tunability within the same isoreticular framework. Furthermore, the high C 3 H 8 /C 3 H 6 separation performance was further confirmed by the breakthrough experiments.

36 MATERIALS SCIENCE↗

Dynamically Formed Active Sites on Liquid Boron Oxide for Selective Oxidative Dehydrogenation of Propane

Boron-based catalysts have been shown to be both active and selective for driving the oxidative dehydrogenation of propane (ODHP) without the use of precious metals. This reaction occurs at temperatures that melt the oxide catalyst which challenges our ability to identify the liquid structures of the boron oxide phase under reaction conditions, hindering the understanding of its active sites and reaction mechanism. By combining ab initio molecular dynamics simulation, in-situ Raman characterization, and microkinetic modeling, we propose that the di-coordinated boron sites (BO2) in liquid boron oxide are the active species for O2 activation under reaction conditions. The formed peroxy-like species (>B-O-O-B<) can be viewed as a moderate oxidant for ODHP. The dynamical >B-O* dangling bond originated from >B-O-O-B< site as well as the liquid B2O3 structure itself, plays a critical role in the abstraction of H atoms from propane (C3H7 radical formation). Microkinetic modeling reveals C3H7 radical formation to be the main rate controlling step (~75% degree of rate control) with the dehydration of boron hydroxyls (B-OHs) to recover the di-coordinated boron active sites controlling the remainder of the rate (~25% degree of rate control). Moreover, the activation barriers are found to strongly depend upon the surface B-OH concentration. These findings provide significant insights into the active site and reaction mechanisms on boron-based catalysts for ODHP and underlie the importance of understanding the liquid nature of the catalyst to account for the catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-Atom Manganese-Based Catalysts for the Oxidative Dehydrogenation of Propane

Combinatorial screening of 150 supported metal oxide (manganese and additives) catalysts was carried out via a high-throughput synthesis platform and parallel reactors for the oxidative dehydrogenation (ODH) of propane to propylene. Specifically, an organomanganese (0.05-2.5 Mn atoms/nm 2 ) complex was grafted on metal oxide supports (Al 2 O 3 , SiO 2 , TiO 2 , and ZrO 2 ) premodified with either Lewis acid (Al, Ti, Zn, and Zr) or redox-active (Cu, Cr, Ga Ni, V) additives at various surface coverages (25, 50, and 75%). Catalysts were characterized by high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Raman spectroscopy, and UV-vis spectroscopy. Catalysts 0.05 Mn/V(50%)/Al 2 O 3 and 0.05 Mn/Ni(50%)/ZrO 2 showed the highest combined propane conversion and propylene selectivities (31/41% and 15/85%), with excellent stability at 500 degrees C for 25 h. The presence of Ni in Mn/Ni/ZrO 2 resulted in a 6-fold increase in turnover frequency (TOF) over the Mn/ZrO 2 . HRTEM identified single Mn atoms after 500 degrees C heat treatment. For the Mn/Ni/ZrO 2 system, Mn was incorporated into the support lattice due to the similar ionic radius of Mn 2+ and Zr 4+ , which was also enhanced by the presence of Ni. For the Mn/V/Al 2 O 3 system, highly active MnO was prevalent as observed by Raman. Both V and Mn contributed to an increase in mutual dispersion, but both species remained on the surface. Finally, it is proposed that the highly dispersed atom and interactions between Mn with either Ni or V are responsible for the ODH performance and stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transforming Boron Carbon Nitride: A Carbon-to-Oxygen Switch to Boost Propane Oxidative Dehydrogenation

Hexagonal boron nitride (h-BN) catalysts exhibit high alkene selectivity in the oxidative dehydrogenation of propane (ODHP). Nevertheless, the conversion-selectivity trade-off persisted primarily due to the low density of oxygen-containing boron active species, while simple and controllable modification strategies for h-BN still face challenges. Herein, we developed an in situ carbon-to-oxygen switch strategy within a tailored boron carbon nitride (BCN) framework, in which uniformly embedded B–C 3 were transformed into B–O 3 via oxidative treatment (denoted as BNO x ). The structural evolution from B–C 3 to B–O 3 was well characterized by spectroscopy and soft X-ray absorption techniques. The resulting BNO x catalysts, enriched with B–O 3 units, demonstrated performance in ODHP, achieving a propane conversion of 50.4% with 32.7% olefin yield at 500 °C. Density functional theory (DFT) calculations confirmed that B–O 3 species preferentially lower activation barriers, rendering the process thermodynamically more favorable. In conclusion, this work introduced an in situ reconstruction method for atomic-level heteroatom-engineered h-BN catalysts, opening an avenue for advanced catalyst design across energy conversion systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Strong Support Effect in Selective Propane Dehydrogenation Catalyzed by Ga( i -Bu) 3 Grafted onto γ-Alumina and Silica

The reactions of Ga( i -Bu) 3 ( i -Bu = CH 2 CH(CH 3 ) 2 ) with the dehydrated and partially dehydroxylated surfaces of alumina (Al 2 O 3–500 ) and silica (SiO 2–700 ) were studied by IR, high field solid-state NMR and EXAFS spectroscopies, as well as elemental analysis. Grafting onto Al 2 O 3–500 occurs selectively by protonolysis at individual surface hydroxyl groups, resulting in the formation of mononuclear [(≡AlO)Ga( i -Bu) 2 L] (L = surface oxygen) sites as the major surface organometallic entities. Conversely, grafting on silica affords dinuclear species [(≡SiO) 2 Ga 2 ( i -Bu) 3 ] by a combination of protonolysis and isobutyl group transfer to Si. Further evidence for the difference in nuclearity was obtained by analysis of the WT-EXAFS. The mononuclear alumina-supported Ga sites show much higher activity in propane dehydrogenation than their dinuclear silica-supported counterparts. The propane dehydrogenation reaction may require the presence of Al–O–Ga bonds to promote heterolytic C–H bond activation. In conclusion, comparisons with benchmark catalysts and related systems show that the effect of the catalyst diluent is significant under the reaction conditions and must be carefully assessed in order to attribute reactivity correctly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗