Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA SHEATH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

The acoustic instabilities in magnetized collisional dusty plasmas

The present work investigates the wave propagation in collisional dusty plasmas in the presence of electric and magnetic field. It is shown that the dust ion-acoustic waves may become unstable to the reactive instability whereas dust-acoustic waves may suffer from both reactive and dissipative instabilities. If the wave phase speed is smaller than the plasma drift speed, the instability is of reactive type whereas in the opposite case, the instability becomes dissipative in nature. Plasma in the vicinity of dust may also become unstable to reactive instability with the instability sensitive to the dust material: dielectric dust may considerably quench this instability. This has implications for the dust charging and the use of dust as a probe in the plasma sheath.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron density and plasma dynamics of a colliding plasma experiment

We present experimental results of two head-on colliding plasma sheaths accelerated by pulsed-power-driven coaxial plasma accelerators. The measurements have been performed in a small vacuum chamber with a neutral-gas prefill of ArH{sub 2} at gas pressures between 17 Pa and 400 Pa and load voltages between 4 kV and 9 kV. As the plasma sheaths collide, the electron density is significantly increased. The electron density reaches maximum values of ≈8 ⋅ 10{sup 15} cm{sup −3} for a single accelerated plasma and a maximum value of ≈2.6 ⋅ 10{sup 16} cm{sup −3} for the plasma collision. Overall a raise of the plasma density by a factor of 1.3 to 3.8 has been achieved. A scaling behavior has been derived from the values of the electron density which shows a disproportionately high increase of the electron density of the collisional case for higher applied voltages in comparison to a single accelerated plasma. Sequences of the plasma collision have been taken, using a fast framing camera to study the plasma dynamics. These sequences indicate a maximum collision velocity of 34 km/s.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Detailed modeling of electron emission for transpiration cooling of hypersonic vehicles

Electron transpiration cooling (ETC) is a recently proposed approach to manage the high heating loads experienced at the sharp leading edges of hypersonic vehicles. Computational fluid dynamics (CFD) can be used to investigate the feasibility of ETC in a hypersonic environment. In this paper, a modeling approach is presented for ETC, which includes developing the boundary conditions for electron emission from the surface, accounting for the space-charge limit effects of the near-wall plasma sheath. The space-charge limit models are assessed using 1D direct-kinetic plasma sheath simulations, taking into account the thermionically emitted electrons from the surface. The simulations agree well with the space-charge limit theory proposed by Takamura et al. for emitted electrons with a finite temperature, especially at low values of wall bias, which validates the use of the theoretical model for the hypersonic CFD code. The CFD code with the analytical sheath models is then used for a test case typical of a leading edge radius in a hypersonic flight environment. The CFD results show that ETC can lower the surface temperature of sharp leading edges of hypersonic vehicles, especially at higher velocities, due to the increase in ionized species enabling higher electron heat extraction from the surface. Finally, the CFD results also show that space-charge limit effects can limit the ETC reduction of surface temperatures, in comparison to thermionic emission assuming no effects of the electric field within the sheath.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Reversal of the asymmetry in a cylindrical coaxial capacitively coupled Ar/Cl 2 plasma

The reduction of the asymmetry in the plasma sheath voltages of a cylindrical coaxial capacitively coupled plasma is crucial for efficient surface modification of the inner surfaces of concave three-dimensional structures, including superconducting radio frequency cavities. One critical asymmetry effect is the negative dc self-bias, formed across the inner electrode plasma sheath due to its lower surface area compared to the outer electrode. The effect on the self-bias potential with the surface enhancement by geometric modification on the inner electrode structure is studied. The shapes of the inner electrodes are chosen as cylindrical tube, large and small pitch bellows, and disc-loaded corrugated structure (DLCS). The dc self-bias measurements for all these shapes were taken at different process parameters in Ar/Cl 2 discharge. Lastly, the reversal of the negative dc self-bias potential to become positive for a DLCS inner electrode was observed and the best etch rate is achieved due to the reduction in plasma asymmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Scattering Efficiency of High-Voltage Tethers in Space

Several concepts have been proposed to remediate the effect of artificial Radiation Belts (RB) in Space Plasma. Among them is the high-voltage electrostatic tether remediation technique. Preliminary analysis that has been carried out later by several groups showed, that this technique could be very efficient and is able to control relativistic electron energies of artificial RB population. The relativistic electron population is the one of the most important topic of US Space Weather studies and very dangerous to many civilian and military space assets, it is also important to study some fundamentals of scattering efficiency of high-voltage tethers in space plasma. There are several fundamental issues that should be examined in order to validate high-voltage tether artificial RB remediation concept. The most critical among them are: power consumption, the size and stability of the plasma sheath around the tether, and scattering efficiency of this high-voltage system that is ultimately related with the plasma sheath size. This study would be focused on the scattering process itself and artificial RB remediation assuming that power consumption and the size of the plasma sheath are known.

Krivorutsky, E. N.↗

The effect of microscopic texture on the direct plasma surface passivation of Si solar cells

Textured silicon surfaces are widely used in manufacturing of solar cells due to increasing the light absorption probability and also the antireflection properties. However, these Si surfaces have a high density of surface defects that need to be passivated. In this study, the effect of the microscopic surface texture on the plasma surface passivation of solar cells is investigated. The movement of 10{sup 5} H{sup +} ions in the texture-modified plasma sheath is studied by Monte Carlo numerical simulation. The hydrogen ions are driven by the combined electric field of the plasma sheath and the textured surface. The ion dynamics is simulated, and the relative ion distribution over the textured substrate is presented. This distribution can be used to interpret the quality of the Si dangling bonds saturation and consequently, the direct plasma surface passivation.

36 MATERIALS SCIENCE↗

Radio frequency plasma method for uniform surface processing of RF cavities and other three-dimensional structures

A method for efficient plasma etching of surfaces inside three-dimensional structures can include positioning an inner electrode within the chamber cavity; evacuating the chamber cavity; adding a first inert gas to the chamber cavity; regulating the pressure in the chamber; generating a plasma sheath along the inner wall of the chamber cavity; adjusting a positive D.C. bias on the inner electrode to establish an effective plasma sheath voltage; adding a first electronegative gas to the chamber cavity; optionally readjusting the positive D.C. bias on the inner electrode reestablish the effective plasma sheath voltage at the chamber cavity; etching the inner wall of the chamber cavity; and polishing the inner wall to a desired surface roughness.

36 MATERIALS SCIENCE↗

The dust motion inside the magnetized sheath - The effect of drag forces

The isolated charged dust inside the magnetized plasma sheath moves under the influence of the electron and ion drag force and the sheath electrostatic field. The charge on the dust is a function of its radius as well as the value of the ambient sheath potential. It is shown that the charge on the dust determines its trajectory and dust performs the spiraling motion inside the sheath. The location of the turning spiral is determined by the number of negative charge on the dust, which in turn is a function of the dust radius. The back and forth spiraling motion finally causes the dust to move in a small, narrow region of the sheath. For a bigger dust particle, the dust moves closer to the sheath presheath boundary suggesting that the bigger grains, owing to the strong repulsion between the wall and dust, will be unable to travel inside the sheath. Only small, micron-sized grains can travel closer to the wall before repulsion pushes it back toward the plasma-sheath boundary. The temporal behavior of the spiraling dust motion appears like a damped harmonic oscillation, suggesting that the plasma drag force causes dissipation of the electrostatic energy. However, after initial damping, the grain keeps oscillating although with much smaller amplitude. The possible application of the present results to the ongoing sheath experiments is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Decay of a low-pressure oxygen magnetized and unmagnetized plasma

Extraction of negative ions from electronegative plasmas is one of the key issues addressed during the study of these plasmas. One of the widely used methods is the turn off of the electron heating power. This results in the escape of electrons from the plasma and results in the formation of almost pure ion-ion plasma. In the latter case, the plasma sheath collapses, which enables the extraction of negative ions from the plasma. Another method is the application of a large magnetic field to the plasma. If the electrons become magnetized and trapped near the center of discharge chamber, the plasma sheaths near the walls collapse. This also enables the negative ion extraction from the plasma even during the power-on stage. The aim of the present paper is the comparison of these two methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion extraction from a plasma

The physical processes governing ion extraction from a plasma have been examined experimentally. The screen hole plasma sheath (the transition region wherein significant ion acceleration and complete electron retardation occurs) has been defined by equipotential plots for a variety of ion accelerator system geometries and operating conditions. It was found that the screen hole plasma sheath extends over a large distance, and influences ion and electron trajectories at least 15 Debye lengths within the discharge chamber. The electron density variation within the screen hole plasma sheath satisfied a Maxwell-Boltzmann density distribution at an effective electron temperature dependent on the discharge plasma primary-to-Maxwellian electron density ratio. Plasma ion flow up to and through the sheath was predominantly one-dimensional, and the ions entered the sheath region with a modified Bohm velocity. Low values of the screen grid thickness to screen hole diameter ratio were found to give good ion focusing and high extracted ion currents because of the effect of screen webbing on ion focusing.

Aston, G.↗

Collaborative Research: Understanding Ion Losses to Plasma Boundaries Sheaths and Presheaths

Sheaths are common to all bounded steady-state plasmas. This includes laboratory, industrial, fusion, and in some cases even space plasmas. They form in general to balance particle loss and maintain quasi-neutrality in plasmas. Electrons are lighter than the ions by 2000 times or more (depending on the gas), and in most plasmas ion temperatures are rarely higher than the electron temperature and generally much lower. Thus in most cases, negative potential sheaths occur to confine electrons and allow ions to be freely lost. We have investigated how a plasma locally response to a positive bias on a small electrode, and have established area criteria which plasma reacts differently to the positive bias – first a pure electron sheath, and a global non-ambipolar regime where all electrons are lost to the electrode, and a double layer structure identified as a virtual cathode forms to limiting electron loss and maintain quasi-neutrality, and finally a anode spot regime where a secondary discharge occurs in front of the electrode, turning it into the major loss area of the entire plasma. Electrode area and plasma parameters criteria for these regimes were established, and the effect of the virtual cathode on the electrode’s I-V characteristics was investigated. We have also developed a global non-ambipolar electron source to replace hollow cathodes in a number of plasma applications. This eliminates the lifetime limitation and maintenance cost of hollow cathodes as they easily wear out easily and cannot be replaced in space applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A boundary value “reservoir problem” and boundary conditions for multi-moment multifluid simulations of sheaths

Multifluid simulations of plasma sheaths are increasingly used to model a wide variety of problems in plasma physics ranging from global magnetospheric flows around celestial bodies to plasma–wall interactions in thrusters and fusion devices. For multifluid problems, accurate boundary conditions to model an absorbing wall that resolves a classical sheath remain an open research area. This work justifies the use of vacuum boundary conditions for absorbing walls to show comparable accuracy between a multifluid sheath and lower moments of a continuum-kinetic sheath.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE Final Report on Virginia Tech’s contribution to “Tokamak Disruption Simulation”

This work was performed by Virginia Tech in collaboration with multiple institutions led by Los Alamos National Laboratory as a part of the Tokamak Disruption Simulation SciDAC (Scientific Discovery through Advanced Computing) project supported jointly by the Department of Energy Office of Science and Ad- vanced Scientific Computing Research. This report summarizes Virginia Tech’s contributions to the Sci- DAC project. Virginia Tech researchers (presently University of Washington researchers) focused on the fundamental role of plasma-material interaction on transport, which could then have macroscopic effects on simulations of tokamak disruptions. The plasma sheath, which regulates plasma particle and energy fluxes to the wall, is an essential component in the study of plasma-material interaction (PMI). Understanding sheath theory by accounting for finite sheath thickness and transport in the vicinity of the sheath entrance can sig- nificantly modify typical assumptions that are made in the Bohm speed analysis, where the Bohm speed provides the lower bound of the plasma exit flow speed. Our work provides a modified Bohm speed formu- lation that accounts for the critical role of transport and for applications that are away from the asymptotic limits that are typically assumed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling plasma-assisted growth of graphene-carbon nanotube hybrid

A theoretical model describing the growth of graphene-CNT hybrid in a plasma medium is presented. Using the model, the growth of carbon nanotube (CNT) on a catalyst particle and thereafter the growth of the graphene on the CNT is studied under the purview of plasma sheath and number density kinetics of different plasma species. It is found that the plasma parameter such as ion density; gas ratios and process parameter such as source power affect the CNT and graphene dimensions. The variation in growth rates of graphene and CNT under different plasma power, gas ratios, and ion densities is analyzed. Based on the results obtained, it can be concluded that higher hydrocarbon ion densities and gas ratios of hydrocarbon to hydrogen favor the growth of taller CNTs and graphene, respectively. In addition, the CNT tip radius reduces with hydrogen ion density and higher plasma power favors graphene with lesser thickness. The present study can help in better understanding of the graphene-CNT hybrid growth in a plasma medium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A radio-frequency sheath model for complex waveforms

Plasma sheaths driven by radio-frequency voltages occur in contexts ranging from plasma processing to magnetically confined fusion experiments. An analytical understanding of such sheaths is therefore important, both intrinsically and as an element in more elaborate theoretical structures. Radio-frequency sheaths are commonly excited by highly anharmonic waveforms, but no analytical model exists for this general case. We present a mathematically simple sheath model that is in good agreement with earlier models for single frequency excitation, yet can be solved for arbitrary excitation waveforms. As examples, we discuss dual-frequency and pulse-like waveforms. The model employs the ansatz that the time-averaged electron density is a constant fraction of the ion density. In the cases we discuss, the error introduced by this approximation is small, and in general it can be quantified through an internal consistency condition of the model. This simple and accurate model is likely to have wide application.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of driving voltages in dual capacitively coupled radio frequency plasma: A study by nonlinear global model

On the basis of nonlinear global model, a dual frequency capacitively coupled radio frequency plasma driven by 13.56 MHz and 27.12 MHz has been studied to investigate the influences of driving voltages on the generation of dc self-bias and plasma heating. Fluid equations for the ions inside the plasma sheath have been considered to determine the voltage-charge relations of the plasma sheath. Geometrically symmetric as well as asymmetric cases with finite geometrical asymmetry of 1.2 (ratio of electrodes area) have been considered to make the study more reasonable to experiment. The electrical asymmetry effect (EAE) and finite geometrical asymmetry is found to work differently in controlling the dc self-bias. The amount of EAE has been primarily controlled by the phase angle between the two consecutive harmonics waveforms. The incorporation of the finite geometrical asymmetry in the calculations shift the dc self-bias towards negative polarity direction while increasing the amount of EAE is found to increase the dc self-bias in either direction. For phase angle between the two waveforms ϕ = 0 and ϕ = π/2, the amount of EAE increases significantly with increasing the low frequency voltage, whereas no such increase in the amount of EAE is found with increasing high frequency voltage. In contrast to the geometrically symmetric case, where the variation of the dc self-bias with driving voltages for phase angle ϕ = 0 and π/2 are just opposite in polarity, the variation for the geometrically asymmetric case is different for ϕ = 0 and π/2. In asymmetric case, for ϕ = 0, the dc self-bias increases towards the negative direction with increasing both the low and high frequency voltages, but for the ϕ = π/2, the dc-self bias is increased towards positive direction with increasing low frequency voltage while dc self-bias increases towards negative direction with increasing high frequency voltage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dependence of the Performance of the Long Pulse RF Driven Negative Ion Source on the Magnetic Filter Field

In the long pulse RF source the plasma drift caused by the magnetic filter field leads to different plasma parameters close to the top and bottom halves of the plasma. In order to investigate the effect of the plasma density on the extracted currents, the bottom grid halve was covered and the direction of the drift was converted by changing the polarity of the magnets. The asymmetry of the plasma density was measured by H{sub {beta}} spectroscopy. By biasing the plasma grid the asymmetry could be enlarged, but the current of co-extracted electrons could be minimized in a similar way for both polarities. The extracted currents of H{sup -} ions as well as of the electrons, however, depend only weakly on the direction of the drift i. e. on the plasma densities. The results indicate that the source performance is determined to a greater degree by the plasma sheath close to the plasma grid which is not yet accessible by diagnostics.

07 ISOTOPE AND RADIATION SOURCES↗

PLASMA ETCHING OF A SINGLE-CELL RF CAVITY -ASYMMETRIC ELECTRONEGATIVE DISCHARGE

We are pursuing the use of environmentally friendly dry etching of SRF cavity in Ar/Cl2 discharge. We have successfully demonstrated on flat samples that in a barrel-type reactor etching rates are comparable to the wet process, such as BCP or EP. The geometry of SRF cavities made of bulk Nb defines the use of asymmetric RF discharge configuration for plasma etching. The asymmetry in the surface area of a driven and grounded electrode creates a difference in the voltage drop over the plasma sheath attached to the driven electrode and the plasma sheath attached to the cavity surface. A specially designed single cell cavity is used to study these asymmetric discharges which contain 20 sample holder holes symmetrically placed over the cell. These sample holder holes can be used for both diagnostics and sample etching purposes. The approach is to combine radially and spectrally resolved profiles of optical intensity of the discharge with direct etched surface diagnostics to obtain an optimum combination of etching rates, roughness and homogeneity in a variety of discharge types, conditions and sequences.

Upadhyay, Janardan↗