Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Laser-heater assisted plasma channel formation in capillary discharge waveguides

A method of creating plasma channels with controllable depth and transverse profile for the guiding of short, high power laser pulses for efficient electron acceleration is proposed. The plasma channel produced by the hydrogen-filled capillary discharge waveguide is modified by a ns-scale laser pulse, which heats the electrons near the capillary axis. This interaction creates a deeper plasma channel within the capillary discharge that evolves on a ns-time scale, allowing laser beams with smaller spot sizes than would otherwise be possible in the unmodified capillary discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulations of nanosecond-pulsed dielectric barrier discharges in atmospheric pressure air

This paper describes simulations of nanosecond pulse plasma formation between planer electrodes covered by dielectric barriers in air at atmospheric pressure and 340 K. The plasma formation process starts as electrons detach from negative ions of molecular oxygen that are produced from the previous discharge pulse. An ionization front is found to form close to the positively biased electrode and then strengthens and propagates towards the grounded electrode with increasing gap voltage. Charge accumulation and secondary emission from the grounded electrode eventually lead to sheath collapse. One interesting feature is a predicted reversal in gap potential due to the accumulated charge, even when there is no reversal in applied potential. The simulation results are compared to recent measurement of mid-gap electric field under the same discharge conditions [Ito et al., Phys. Rev. Lett. 107, 065002 (2011)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Waves generated in the plasma plume of helicon magnetic nozzle

Experimental measurements have shown that the plasma plume created in a helicon plasma device contains a conical structure in the plasma density and a U-shaped double layer (US-DL) tightly confined near the throat where plasma begins to expand from the source. Recently reported two-dimensional particle-in-cell simulations verified these density and US-DL features of the plasma plume. Simulations also showed that the plasma in the plume develops non-thermal feature consisting of radial ion beams with large densities near the conical surface of the density structure. The plasma waves that are generated by the radial ion beams affecting the structure of the plasma plume are studied here. We find that most intense waves persist in the high-density regions of the conical density structure, where the transversely accelerated ions in the radial electric fields in the plume are reflected setting up counter-streaming. The waves generated are primarily ion Bernstein modes. The nonlinear evolution of the waves leads to magnetic field-aligned striations in the fields and the plasma near the conical surface of the density structure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhanced high harmonic generation and the phase effect in double-sided relativistic laser-foil interaction

High harmonic generation (HHG) from relativistic laser-foil interaction is investigated analytically and through particle-in-cell simulations. Previous work has shown that when two counter-propagating circularly polarized (CP) laser pulses interact with a thin foil, electrons can be well confined spatially to form a high density layer. The layer electrons oscillate in certain transversal direction and radiate intense high order harmonics. It is demonstrated here that there is a critical foil thickness, only below which can high harmonics be generated efficiently. Furthermore, to enhance the intensity in higher order region, the third linearly polarized (LP) short-wavelength laser pulse with much lower intensity is introduced. Analysis and simulations both show that the enhancement is determined by the relative phase {delta}{phi} between the driving CP laser pulses and LP pulse. The enhancement at high order is quite considerable and very sensitive to the relative phase {delta}{phi}, thus offering not only a way to efficiently produce HHG but also a new method to measure the phase of intense high-frequency laser pulses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energetic protons from an ultraintense laser interacting with a symmetric parabolic concave target

A scheme of a symmetric parabolic concave target irradiated by an ultraintense laser for efficient proton acceleration is proposed and involved problem is studied by using two-dimensional particle-in-cell (PIC) simulations. Results indicate that on one hand, the laser field is focused by the front parabolic concave surface of target and, on the other hand, more energetic hot electrons will traverse to the rear surface of target due to concave shape. The space-charge-separation field, induced by those hot electrons escaping form parabolic concave rear surface of target, can accelerate protons to relatively high energy with narrow energy spread. The dependence of the efficiency of proton acceleration on the target parameters is examined, and the optimal target parameters are obtained. Particle-in-cell simulations show that the proton peak energy and energy spread are greatly enhanced when the target parameters are chosen optimal, for example, a proton bunch with the maximum energy {approx}27.5 MeV and energy spread {approx}7% can be generated. Some implications of our results to experiments and comparisons with the other works are also discussed briefly.

43 PARTICLE ACCELERATORS↗

Numerical simulation of the plasma generated by the interaction high-current electron beam with Al target

The results of one dimensional particle-in-cell simulations of the dynamics of plasma generated during the interaction of a high-energy ({<=}200 keV) and high-current ({<=}15 A/cm{sup 2}) electron beam with an aluminum target are presented. The generated target plasma is low-ionized and characterized by non-Maxwellian electron energy distribution. The density and electron temperature of the plasma, which expands toward the anode at a typical velocity of {approx}10{sup 5} cm/s, does not exceed 4 Multiplication-Sign 10{sup 14} cm{sup -3} and 1 eV, respectively, which is in satisfactory agreement with the experimental results presented in W. An et al., J. Appl. Phys. 110, 093304 (2011). The results of the simulations showed also acceleration of the ions from the target plasma toward the anode by the potential of the non-compensated space charge of the electron beam. The typical velocity of these energetic ions is {approx}10{sup 8} cm/s and depends on the electron current density and energy. These ions partially compensate the space charge of the electron beam, which leads to a decrease in the depth of the potential well.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulations of electrothermal instability growth in solid aluminum rods

A recent publication [K. J. Peterson et al., Phys. Plasmas 19, 092701 (2012)] describes simulations and experiments of electrothermal instability growth on well characterized initially solid aluminum and copper rods driven with a 20 MA, 100 ns rise time current pulse on Sandia National Laboratories Z accelerator. Quantitative analysis of the high precision radiography data obtained in the experiments showed excellent agreement with simulations and demonstrated levels of instability growth in dense matter that could not be explained by magneto-Rayleigh-Taylor instabilities alone. This paper extends the previous one by examining the nature of the instability growth in 2D simulations in much greater detail. The initial instability growth in the simulations is shown via several considerations to be predominantly electrothermal in nature and provides a seed for subsequent magneto-Rayleigh-Taylor growth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improved ion acceleration via laser surface plasma waves excitation

The possibility of enhancing the emission of the ions accelerated in the interaction of a high intensity ultra-short (<100 fs) laser pulse with a thin target (<10λ{sub 0}), via surface plasma wave excitation is investigated. Two-dimensional particle-in-cell simulations are performed for laser intensities ranging from 10{sup 19} to 10{sup 20} Wcm{sup −2}μm{sup 2}. The surface wave is resonantly excited by the laser via the coupling with a modulation at the target surface. In the cases where the surface wave is excited, we find an enhancement of the maximum ion energy of a factor ∼2 compared to the cases where the target surface is flat.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High contrast ion acceleration at intensities exceeding 10{sup 21} Wcm{sup −2}

Ion acceleration from short pulse laser interactions at intensities of 2×10{sup 21}Wcm{sup −2} was studied experimentally under a wide variety of parameters, including laser contrast, incidence angle, and target thickness. Trends in maximum proton energy were observed, as well as evidence of improvement in the acceleration gradients by using dual plasma mirrors over traditional pulse cleaning techniques. Extremely high efficiency acceleration gradients were produced, accelerating both the contaminant layer and high charge state ions from the bulk of the target. Two dimensional particle-in-cell simulations enabled the study of the influence of scale length on submicron targets, where hydrodynamic expansion affects the rear surface as well as the front. Experimental evidence of larger electric fields for sharp density plasmas is observed in simulation results as well for such targets, where target ions are accelerated without the need for contaminant removal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a polar direct-drive platform for studying inertial confinement fusion implosion mix on the National Ignition Facility

Experiments were performed to develop a platform for the simultaneous measurement of mix and its effects on fusion burn. Two polar direct drive implosions of all-plastic capsules were conducted for the first time on the National Ignition Facility (NIF). To measure implosion trajectory and symmetry, area image backlighting of these capsules was also employed for the first time on NIF, an advance over previous 1-D slit imaging experiments, providing detailed symmetry data of the capsules as they imploded. The implosion trajectory and low-mode asymmetry seen in the resultant radiographs agreed with pre-shot predictions even though the 700 kJ drive energy produced laser beam intensities exceeding laser-plasma instability thresholds. Post-shot simulations indicate that the capsule yield was reduced by a factor of two compared to pre-shot predictions owing to as-shot laser drive asymmetries. The pre-shot predictions of bang time agreed within 200 ps with the experimental results. The second shot incorporated a narrow groove encircling the equator of the capsule. A predicted yield reduction factor of three was not observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simple formula for the interspaces of periodic grating structures self-organized on metal surfaces by femtosecond laser ablation

Self-organized grating structures formed on Mo and Ti metal surfaces irradiated with femtosecond laser pulses at wavelengths of 800 and 400 nm are investigated by electron microscopy. We observe the formation of the self-organized grating structures on the metals irradiated with 400-nm laser pulses at low laser fluence in narrow fluence ranges. The interspaces of the grating structure depend on the wavelength and fluence of the laser. We find that the dependence of the grating interspaces on laser fluence can be explained by a simple formula for induction of a surface-plasma wave through the parametric decay of laser light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Initial conditions of radiative shock experiments

We performed experiments at the Omega Laser Facility to characterize the initial, laser-driven state of a radiative shock experiment. These experiments aimed to measure the shock breakout time from a thin, laser-irradiated Be disk. The data are then used to inform a range of valid model parameters, such as electron flux limiter and polytropic γ, used when simulating radiative shock experiments using radiation hydrodynamics codes. The characterization experiment and the radiative shock experiment use a laser irradiance of ∼7 × 10{sup 14} W cm{sup −2} to launch a shock in the Be disk. A velocity interferometer and a streaked optical pyrometer were used to infer the amount of time for the shock to move through the Be disk. The experimental results were compared with simulation results from the Hyades code, which can be used to model the initial conditions of a radiative shock system using the CRASH code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hot-electron generation from laser–pre-plasma interactions in cone-guided fast ignition

Two-dimensional particle-in-cell (PIC) simulations were performed for the cone-in-shell integrated fast-ignition experiments at the Omega Laser Facility [W. Theobald et al., Phys. Plasmas 18, 056305 (2011)]. The initial plasma density profile in the PIC simulations was taken from hydrodynamic simulations of the prepulse interaction with the gold cone. Hot-electron generation from laser–pre-plasma interactions and transport up to 100× the critical density (n c ) was studied. The simulation showed a mean divergence half-angle of 68° and 50% absorption for the hot electrons. The simulation results show that the generated hot electrons were dominated in number by low-energy electrons but in energy by multi-MeV electrons. Electron transport between 5 and 100 n c was ballistic. In the late stage of the simulation, all the results were largely independent of polarization, indicating a stochastic hot-electron–generation mechanism.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Temporal and spatial structure of a runaway electron beam in air at atmospheric pressure

The time- and spatial structure of a runaway electron beam generated in air at atmospheric pressure by a high-voltage pulse with a rise time of {approx}300 ps is studied experimentally and numerically. It is obtained that the duration of the runaway electron current is a few tens of picoseconds, and it can consist of two or many peaks. It is shown that the many-peak temporal structure of the beam is caused by the non-simultaneous appearance of several emission centers on the cathode edge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrical studies and plasma characterization of an atmospheric pressure plasma jet operated at low frequency

Low-temperature, high-pressure plasma jets have an extensive use in medical and biological applications. Much work has been devoted to study these applications while comparatively fewer studies appear to be directed to the discharge itself. In this work, in order to better understand the kind of electrical discharge and the plasma states existing in those devices, a study of the electrical characteristics of a typical plasma jet, operated at atmospheric pressure, using either air or argon, is reported. It is found that the experimentally determined electrical characteristics are consistent with the model of a thermal arc discharge, with a highly collisional cathode sheet. The only exception is the case of argon at the smallest electrode separation studied, around 1 mm in which case the discharge is better modeled as either a non-thermal arc or a high-pressure glow. Also, variations of the electrical behavior at different gas flow rates are interpreted, consistently with the arc model, in terms of the development of fluid turbulence in the external jet.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-similar expansion of a warm dense plasma

The properties of an expanding plasma composed of degenerate electron fluid and non-degenerate ions are studied. For our purposes, we use fluid equations for ions together with the electron momentum equation that include quantum forces (e.g., the quantum statistical pressure, forces due to the electron-exchange and electron correlations effects) and the quasi-neutrality condition. The governing equation is written in a tractable form by using a self-similar transformation. Numerical results for typical beryllium plasma parameters revealed that, during the expansion, the ion acoustic speed decreases for both isothermal and adiabatic ion pressure. When compared with classical hydrodynamic plasma expansion model, the electrons and ions are found to initially escape faster in vacuum creating thus an intense electric field that accelerates most of the particles into the vacuum ahead of the plasma expansion. The relevancy of the present model to beryllium plasma produced by a femto-second laser is highlighted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spherical ion oscillations in a positive polarity gridded inertial-electrostatic confinement device

A pulsed, positive polarity gridded inertial electrostatic confinement device has been investigated experimentally, using a differential emissive probe and potential traces as primary diagnostics. Large amplitude oscillations in the plasma current and plasma potential were observed within a microsecond of the discharge onset, which are indicative of coherent ion oscillations about a temporarily confined excess of recirculating electron space charge. The magnitude of the depth of the potential well in the established virtual cathode was determined using a differential emissive Langmuir probe, which correlated well to the potential well inferred from the ion oscillation frequency for both hydrogen and argon experiments. It was found that the timescale for ion oscillation dispersion is strongly dependent on the neutral gas density, and weakly dependent on the peak anode voltage. The cessation of the oscillations was found to be due to charge exchange processes converting ions to high velocity neutrals, causing the abrupt de-coherence of the oscillations through an avalanche dispersion in phase space.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the small divergence of laser-driven ion beams from nanometer thick foils

We report on experimental studies of divergence of proton beams from nanometer thick diamond-like carbon foils irradiated by a linearly polarized intense laser with high contrast. Proton beams with extremely small divergence (half angle) of 2° are observed in addition with a remarkably well-collimated feature over the whole energy range, showing one order of magnitude reduction of the divergence angle in comparison to the results from μm thick targets. Similar features are reproduced in two-dimensional particle-in-cell simulations with parameters representing our experiments, indicating a strong influence from the electron density distribution on the divergence of protons. Our comprehensive experimental study reveals grand opportunities for using nm foils in experiments that require high ion flux and small divergence.

43 PARTICLE ACCELERATORS↗