Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PBE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Diffusion coefficients of transition metals in fcc cobalt

Using first-principles density functional theory (DFT), we calculate the diffusivities of 32 different solute elements—all transition metals, together with Al and Si—in fcc cobalt within the formalism of the five-frequency model. For self-diffusion in fcc cobalt, we compare the accuracy of various approximations to the exchange-correlation energy functional of DFT in estimating the activation energy, and find that only the Perdew-Burke-Ernzerhof (PBE) approximation agrees well with experimental reports and all other functionals largely overestimate it. Our calculations also show that an accurate estimation of the self-diffusion coefficient requires explicit calculation of the effective jump frequency and vacancy formation entropy via phonons. Using accurate self-diffusion data and scaling all solute-related attempt frequencies with respect to the attempt frequency for self-diffusion using a simple relation involving the atomic mass and melting temperature of the solute yields solute diffusivities in excellent agreement with experiments, where such data is available. Additionally, we find that large solutes spontaneously relax toward the nearest neighbor vacancy to relieve the misfit strain, and the extent of this relaxation correlates negatively with the migration energy. Thus, in general, larger solutes have lower migration energies and diffuse faster than smaller solutes in fcc cobalt. However, extremely large solutes, e.g., group III elements Sc, Y, Lu, tend to be trapped in an energy valley located halfway toward the vacancy, and monovacancy mediated diffusion may no longer be valid in such cases. Finally, for all the solutes considered, we systematically tabulate the diffusion-related quantities calculated—diffusion prefactors, migration and activation energies—constructing an extensive and accurate first-principles database for solute diffusion in fcc cobalt.

36 MATERIALS SCIENCE↗

Unveiling the mechanism of surface corrugation formation on a quasi free-standing bi-layer graphene via experimental and modeling investigations

Extensive studies have been conducted to accomplish the controls over the formation of surface corrugations on chemical vapor deposited (CVD) graphene. However, the underlying mechanism of the surface corrugation formation on graphene remains elusive, due to the difficulty delineating the growth-induced surface corrugations from wrinkles formed during graphene transfer with the use of a supporting layer casted on top of the sample. Here, in this study, “quasi free-standing” graphene was realized using the weakly-interacting h-BN layer during a wet transfer process to study the surface corrugation formation on graphene. The weak interaction of graphene with the supporting h-BN layer allows for the growth-induced surface corrugations to be released, enabling the investigation of the primary mechanism for the graphene corrugation behavior during the transfer process. The experimental measurements of surface corrugations were conducted using atomic force microscopy (AFM) to reveal that surface corrugations are formed following the graphene’s crystallographic directions. Density functional theory calculations using the projector augmented-wave (PAW) method and Perdew-Burke-Ernzerhof (PBE) exchange correlation functional were also conducted for two models of “atomic-scale ripples” and “nanoscale wrinkles” and showed that all of them are formed along the crystallographic axis of graphene, which is in good agreement with the experimental observations.

36 MATERIALS SCIENCE↗

On The Use of Sectional Techniques for the Solution of Depolymerization Population Balances: Results on a Discrete-Continuous Mesh

To study the discrete bond-breaking phenomena of depolymerization, the use of a fully continuous Population Balance Equation (PBE) is inadequate to embody all the inherent characteristics of the process, thus resulting in the need for a discrete-continuous mesh. In this work, the performance of the three most state-of-the-art sectional techniques, i.e. the fixed pivot technique (FPT), cell average technique (CAT) and finite volume scheme (FVS) in approximating discrete depolymerization using discrete-continuous PBEs was extensively compared and evaluated. The solutions from these three methods show different accuracy depending on the breakage mechanisms. For chain-end scission, the FPT and the CAT satisfactorily predict the population densities and moments whereas the FVS fails to predict the population densities but preserves the zeroth and the first moments. In the application of a discrete-continuous model, we identified a previously-not-reported issue of a precipitous drop in the number density at the boundary of discrete and continuous region specifically for chain-end scission. We successfully fixed this problem by employing the alterations proposed in this paper, to the particle allocation functions at the boundary points. For random scission, all three sectional techniques predict the population densities and moments to a high degree of accuracy, even at a very coarse mesh, through the use of our new stoichiometric kernel which is able to closely approximate the inherently discrete bond-breaking depolymerization process. The assessments in this present work intends to provide a clear-cut direction to efficient and economical modelling of depolymerization processes.

Ahamed, Firnaaz↗

An automated cluster surface scanning method for exploring reaction paths on metal-cluster surfaces

Metal-cluster surfaces present a wide variety of unique coordination environments. This complexity makes it difficult to manually probe the surface reactivity of such clusters. Here, we present a simple and automated method to systematically discover reaction pathways on cluster surfaces, based on the automated cluster surface scanning (ACSS) technique for mapping out potential energy surfaces. We showcase our method on 55-atom icosahedral Cu and Ag clusters, where we determine the activation energies of four elementary steps common in heterogeneous catalysis – hydrogen recombination (H* + H* → H 2 * + *), oxygen recombination (O* + O* → O 2 * + *), water formation (OH* + H* → H 2 O* + *), and CO oxidation (CO* + O* → CO 2 * + *) – with density functional theory calculations (DFT-PBE + D3). We show that the ACSS method requires significantly less human effort than the established manually performed climbing-image nudged elastic band (MP + CI-NEB) technique and locates transition states with comparable accuracy (root-mean-squared error of 0.10 eV) and similar computational cost. Rigorous sampling of the potential energy surface with the ACSS method allows one to locate all lowest-energy reaction pathways obtained via the MP+CI-NEB approach, as well as alternative pathways that one may have missed with the MP+CI-NEB approach due to the many possible pathways available on these clusters. The accuracy and efficiency afforded by the ACSS method could enable high-throughput exploration of the diverse reactivity of metal clusters.

36 MATERIALS SCIENCE↗

Bayesian prior construction for uncertainty quantification in first-principles statistical mechanics

First-principles statistical mechanics enables the prediction of thermodynamic and kinetic properties of materials, but is computationally expensive. Many approaches require surrogate models to calculate energies within Monte Carlo or molecular dynamics simulations. Inexpensive surrogates such as cluster expansions enable otherwise intractable calculations by interpolating data from higher accuracy methods, such as Density Functional Theory (DFT). Surrogate models introduce uncertainty into downstream calculations, in addition to any uncertainty inherent to DFT calculations. Bayesian frameworks address this by quantifying uncertainty and incorporating expert knowledge through priors. However, constructing effective priors remains challenging. This work introduces and describes practical strategies for building Bayesian cluster expansions, focusing on basis truncation, hyperparameter selection, and ground state replication. We analyze multiple basis truncation schemes, compare cross-validation to the evidence-approximation for hyperparameter optimization, and provide methods to find and enforce ground-state-preserving models through priors. Additionally, we compare the uncertainties between different approximations to DFT (LDA, PBE, SCAN) against the uncertainty introduced with the use of cluster expansion surrogate models. These approaches are demonstrated on the BCC Li x Mg 1-x and Li x Al 1-x alloys, which are both of interest for solid-state Li batteries. Our results provide guidelines for constructing and utilizing Bayesian cluster expansions, thereby improving the transparency of materials modeling. Furthermore, the approaches and insights developed in this work can be transferred to a wide range of cluster expansion surrogate models, including the atomic cluster expansion and related machine-learned interatomic potential architectures.

Alloy theory↗

Point defect energetics in gallium arsenide, a comprehensive density functional theory study

In materials, point defects often control or modify functional properties. To predict the performance of materials intended for application in optoelectronic devices, it is imperative to understand the properties of those point defects. For the first time, all six intrinsic defects of GaAs, a key optoelectronics material, and their charge transition levels are calculated using density functional theory with the HSE06 functional. For comparison, both PBE and r 2 SCAN calculations are also carried out. The HSE06 results are found to be in better agreement with experimental data than previous calculations. In conclusion, the importance of using the exact electron exchange present in hybrid functionals and larger supercells to accurately determine defect levels and ground state defect configurations is demonstrated.

36 MATERIALS SCIENCE↗

Kinetics of low-temperature methane activation on IrO 2 (1 1 0): Role of local surface hydroxide species

The ability of the IrO 2 (1 1 0) surface to promote CH 4 activation at low temperatures (~150 K) suggests possibilities for developing IrO 2 -based catalysts to selectively convert light alkanes to high-value chemicals. In this study, we present experimental results and microkinetic simulations, based on density functional theory (DFT) calculations, of temperature programmed reaction spectra (TPRS) obtained for CH 4 σ-complexes adsorbed on IrO 2 (1 1 0), and focus on clarifying how surface OH groups modify the branching between CH 4 desorption, activation and subsequent reactions during TPRS. Our DFT results predict that surface OH groups strongly destabilize CH 4 σ-complexes on IrO 2 (1 1 0) in addition to deactivating surface O-atoms that are needed to achieve CH 4 activation at low temperature. We demonstrate that a microkinetic model that incorporates the influence of surface OH groups on the CH 4 binding and reactivity reproduces experimental TPRS results which show that adsorbed CH 4 σ-complexes preferentially dissociate at low CH 4 coverage, but that an increasing fraction of the adsorbed CH 4 desorbs at low temperature (~120 K) with increasing initial CH 4 or H coverage. The simulations reveal that low-temperature CH4 desorption during TPRS arises primarily from CH 4 σ-complexes that are kinetically-trapped between adjacent surface OH groups, and are thus destabilized and unable to access reactive O-atoms. In addition, when the effect of adjacent OH groups is incorporated we find that the PBE-D3 functional incorporating dispersion provides CH 4 binding energies that agree more closely with that obtained from the TPRS experiments. Overall, our results demonstrate that the local effect of adjacent OH groups must be incorporated into any microkinetic models to properly capture the selectivity between extensive and partial oxidation in alkane conversion on IrO 2 (1 1 0) under reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into the thermal decomposition of plutonium(IV) oxalate – a DFT study of the intermediate structures

The thermal decomposition of plutonium oxalate to oxide is one of the most studied reactions in actinide chemistry but the intermediates have been the subject of debate for decades. Recent experimental data suggest that the decomposition of Pu(IV) oxalate in air undergoes dehydration first, then reduction to Pu(III) oxalate. The precise structural modifications that take place are unknown as experiments have not been able to fully characterize the intermediates at the microscopic level. To rectify this, we employed solid state density functional theory calculations at the PBE-D3 level with a Hubbard U correction to model the structures and energetics of potential dehydrated Pu(IV) and Pu(III) oxalate intermediate compounds. Based on the theoretical study presented here, the anhydrous analogues of the known hydrated Pu(IV) and Pu(III) oxalates are the preferred crystal structures formed through an overall exothermic reaction process. However, decomposition could proceed through the formation of a higher energy, more complicated 3D lattice structure with frustrated oxalate binding. It is expected that the intermediates presented here could be identified using spectroscopic techniques to enable further insight into the reaction mechanism.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Density functional theory calculations of the thermodynamic and kinetic properties of point defects in β -U

Density functional theory (DFT) calculations of the thermodynamic and kinetic properties of point defects in the β phase of uranium are reported. Defect energies and entropies were calculated using 2 x 2 x 2 supercells and the Generalized Gradient Approximation (GGA) of Perdew-Burke-Ernzerhof (PBE) for the exchange-correlation potential. Due to computational cost, calculations of the vibrational properties governing entropies were performed by only displacing atoms within (roughly) the 3rd or 4th nearest neighbor shell of the defect, which implicitly assumes that atoms beyond this distance are unaffected by the defect. Migration barriers were estimated by nudged elastic band (NEB) calculations. The low symmetry of the β-U phase (the unit cell is tetragonal and contains 30 atoms) results in many point defect configurations and even more migration pathways. A connectivity map, starting from the most stable point defects, was developed in order to identify the rate-limiting step controlling the net diffusion rate in each crystallographic direction. The uranium self-diffusivity tensor was calculated by combining the defect formation energies, entropies, migration barriers and attempt frequencies. The fastest diffusion rate was determined to be a vacancy mechanism in the z crystallographic direction. The predicted uranium self-diffusivity for this mechanism agrees well with available experimental data. Finally, the diffusion mechanisms and rates identified in this study will inform fuel performance models of swelling and gas evolution.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

First-principles investigation of uranium mononitride (UN): Effect of magnetic ordering, spin-orbit interactions and exchange correlation functional

Uranium mononitride (UN) is a promising nuclear fuel that combines the advantageous properties of readily used UO 2 and uranium alloys. Various properties of UN have been previously studied using different density functional theory (DFT) methodologies; however, there are still inconsistencies when it comes to the dynamical stability and defect properties of UN. We address these inconsistencies by studying the UN phonons and defect properties using DFT calculations employing two generalized gradient approximation (GGA) exchange-correlation functionals: PBE and AM05, with and without an added on-site Coulomb repulsion term (+U). Furthermore, we investigate the importance of spin-orbit coupling (SOC) when calculating the properties of UN. We use the different methodologies to determine the preference of UN to have antiferromagnetic (AFM) ordering, as seen in experiments, or ferromagnetic (FM) ordering of the uranium spins. We compare the crystallographic properties, density of states, the DFT X-ray photoelectron spectra and phonon dispersions calculated using the different methodologies. We demonstrate that GGA + U reproduces the AFM ordering in UN, but the crystal structure is dynamically unstable. We also show that magnetic ordering is important in finding the lowest energy defective structure, and that SOC has a distinct influence on the energy of the different uranium interstitial defects. Lastly, we discuss the point defect formation energies under U-rich and N-rich conditions, and the stoichiometric formation energies calculated with the different methodologies, providing insight into the observed tendency for forming hypostoichiometric UN.

36 MATERIALS SCIENCE↗

Finite temperature properties of uranium mononitride

Uranium mononitride (UN) is a promising nuclear fuel that combines the advantageous properties of readily used UO 2 and uranium alloys, such as high melting temperature and high uranium density, and thermal conductivity, respectively. A better understanding of UN behavior at operating temperatures can be obtained from finite temperature data, such as elastic properties. To get this information, ab initio molecular dynamics (AIMD) simulations were performed at five different temperatures using constant volume (NVT) and constant pressure (NPT) ensembles. Initially, the performance of PBE functional in reproducing experimental crystallographic properties and magnetic ordering is assessed. The finite temperature phonon dispersions are calculated using NVT simulation results, which show a softening of the phonon modes with increasing temperature. The NPT results are used to obtain the thermal expansion of UN and finite temperature electronic properties. The calculated thermal expansion is compared with our measurements using neutron diffraction. Additionally, the temperature dependent elastic properties of UN are evaluated using the strain-stress method in AIMD simulations, indicating that UN becomes softer and more compressible with increasing temperature. Also, the calculated Young’s modulus slope is in very good agreement with the experiment. The finite temperature heat capacity and electronic thermal conductivity are calculated from AIMD simulations, which are in better agreement with the experiment than the heat capacity and thermal conductivity calculated using the structures relaxed at 0K. Finally, the thermal diffusivity from AIMD has opposite temperature dependence compared to experimental results, which we argued comes from the underestimated electronic thermal conductivity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Ab initio modeling and thermodynamics of hydrated plutonium oxalates

An ab initio study on the plutonium oxalate hydrates: Pu 2 (C 2 O 4 ) 3 ·10H 2 O and Pu(C 2 O 4 ) 2 ·6H 2 O, using PBE exchange-correlation with D3 dispersion correction and Hubbard correction for the plutonium atoms, was performed and compared to experimental vibrational spectral and thermodynamic property values. Here we demonstrated that this technique can accurately predict the experimental infrared spectra Pu(III) oxalate hydrate, as well as the Raman peak of PuO 2 (used to calculate the thermodynamic properties of the oxalates). For Pu(IV) oxalate hydrate we found that our predicted structure agreed qualitatively with PXRD measurements, the only available experimental determination of the structure. Using this method at standard temperature and pressure, we predicted standard enthalpies of formation of -6,755 kJ mol -1 and -3,923 kJ mol -1 and standard Gibbs free energy of formation of -5,899 kJ mol -1 and -3,386 kJ mol -1 for Pu 2 (C 2 O 4 ) 3 ·10H 2 O and Pu(C 2 O 4 ) 2 ·6H 2 O, respectively.

36 MATERIALS SCIENCE↗

KCl-UCl 3 molten salts investigated by Ab Initio Molecular Dynamics (AIMD) simulations

Ab Initio Molecular Dynamics (AIMD) simulations are performed on molten KCl-UCl3 salt mixtures to determine energies, heat capacities, and densities. The density-dependent energy correction (DFT-dDsC), Grimme et al.'s DFT-D3, and Langreth & Lundqvist (vdW-cx) models are used for dispersion forces and combined with the Perdew-Burke-Ernzerhof (PBE) exchange-correlation potential with a Hubbard U parameter for the 5f electrons of uranium. After validating predictions for the end-member systems to literature data, KCl-UCl 3 mixtures are studied at select temperatures. Densities and energies both deviate from ideal solution behavior, with the maximum deviation occurring around 36% UCl 3 for mixing energies and slightly lower (29% UCl3) for densities. Compared to the NaCl-UCl 3 system, which was previously investigated using the same simulation methodologies, the KCl-UCl 3 density and mixing energy deviations from ideal solution behavior are larger by almost a factor of two. No deviation from ideal solution behavior for heat capacity was observed. The AIMD predictions for mixing energies and densities agree qualitatively with experimental data, though the spread in data obtained from the various dispersion force models utilized, measurements, and empirical estimates makes strong conclusions difficult. The dependence of thermodynamic and thermophysical properties on composition is correlated with the local chemistry of the solution phase, in particular, the tendency of UCl 3 to form network structures.

36 MATERIALS SCIENCE↗

Evaluating electrolyte additives for lithium-ion cells: A new Figure of Merit approach

Electrolyte additives are known to improve the performance of lithium-ion cells. In this work we examine the performance of Li 1.03 Ni 0.5 Mn 0.3 Co 0.3 O 2 -graphite (NMC532/Gr) cells containing combinations of lithium bis(oxalate)borate (LiBOB), vinylene carbonate (VC), trivinylcyclotriboroxane (tVCBO), prop-1-ene-1,3-sultone (PES), phenyl boronic acid ethylene glycol ester (PBE), tris(trimethylsilyl) phosphite (TMSPi), triethylphosphite (TEPi), and lithium difluoro(oxalate)borate (LiDFOB) added to our baseline (1.2M LiPF 6 in EC:EMC, 3:7 w/w) electrolyte. In order to rank performance of the various electrolytes, we developed two separate figures of merit (FOM), which are based on the energy retention and power retention of the cells. Using these two metrics in conjunction, we show that only one of the fifteen electrolyte formulations tested significantly outperforms the baseline electrolyte: this electrolyte contains the 0.25 wt% tVCBO + 1 wt% TMSPi additive mix. Little correlation was observed between the FOMs for energy retention and power retention, which indicates that the mechanisms that govern these performance parameters are likely independent of each other. In conclusion, our FOM approach has general applicability and can be used to develop electrolyte and electrode formulations that prolong the life of lithium-ion batteries.

25 ENERGY STORAGE↗

Combined experimental and theoretical assessments of the lattice dynamics and optoelectronics of TaON and Ta{sub 3}N{sub 5}

Presented herein is a detailed discussion of the properties of the lattice dynamic and optoelectronic properties of tantalum(V) oxynitride (TaON) and tantalum(V) nitride (Ta{sub 3}N{sub 5}), from experimental and theoretical standpoint. The active Raman and infra red (IR) frequencies of TaON and Ta{sub 3}N{sub 5} were measured using confocal Raman and Fourier Transform Infrared spectroscopies (FTIR) and calculated using the linear response method within the density functional perturbation theory (DFPT). The detailed study leads to an exhaustive description of the spectra, including the symmetry of the vibrational modes. Electronic structures of these materials were computed using DFT within the range-separated hybrid HSE06 exchange–correlation formalism. Electronic and ionic contributions to the dielectric constant tensors of these materials were obtained from DFPT within the linear response method using the PBE functional. Furthermore, effective mass of photogenerated holes and electrons at the band edges of these compounds were computed from the electronic band structure obtained at the DFT/HSE06 level of theory. The results suggest that anisotropic nature in TaON and Ta{sub 3}N{sub 5} is present in terms of dielectric constant and effective masses. - Graphical abstract: Detailed investigation has been conducted from combined experimental and theoretical approaches on Raman and IR spectroscopies, electronic structures, dielectric constants and effective masses of TaON and Ta{sub 3}N{sub 5}. - Highlights: • Crystal structures of TaON and Ta{sub 3}N{sub 5} are discussed based on XRD and DFT calculation. • Raman and IR spectra of TaON and Ta{sub 3}N{sub 5} materials are measured and computed by DFPT method. • Optoelectronic properties of TaON and Ta{sub 3}N{sub 5} are discussed. • Dielectric constant and effective masses of TaON and Ta{sub 3}N{sub 5} are calculated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

FP-LAPW study of the fundamental properties of the cubic spinel CdAl{sub 2}O{sub 4}

Highlights: Black-Right-Pointing-Pointer Fundamental properties of CdAl{sub 2}O{sub 4} are investigated. Black-Right-Pointing-Pointer Results obtained for energy band gaps using EV-GGA are larger than that within PBE-GGA. Black-Right-Pointing-Pointer The decomposition of the dielectric function into individual band-to-band contributions is calculated. Black-Right-Pointing-Pointer The effective charge-carrier masses are estimated from the band structure. Black-Right-Pointing-Pointer Pressure and temperature dependences of some macroscopic parameters are obtained. -- Abstract: We have investigated the structural, elastic, electronic, optical and thermodynamic properties of the cubic spinel CdAl{sub 2}O{sub 4} using accurate ab initio calculations. Computed equilibrium structural parameters are in good agreement with the available experimental data. Single-crystals elastic parameters are calculated for pressure up to 30 GPa using a conserving-volume total energy-strain method. Isotropic elastic parameters for ideal polycrystalline CdAl{sub 2}O{sub 4} aggregates are computed in the framework of the Voigt-Reuss-Hill approximation. Result for band structure using the Engel-Vosko scheme of the GGA shows a significant improvement over the common GGA functionals. Optical spectra have been calculated for the energy range 0-30 eV. The peaks and structures in the optical spectra are assigned to interband transitions. Pressure dependence of the band gaps, static dielectric constant and static refractive index are also investigated. Pressure and thermal effects on some macroscopic properties are predicted using the quasi-harmonic Debye model.

36 MATERIALS SCIENCE↗

Analysis of the structural, electronic, elastic and thermodynamic properties of CuAl2X4 (X = O, S) spinel structure

Highlights: • Fundamental properties of CuAl{sub 2}X{sub 4} (X = O, S) aluminate spinels have been investigated. • The pressure dependence of the elastic constants C{sub ij} can be successfully fit by a straight line. • CuAl{sub 2}X{sub 4} (X = O, S) compounds are mechanically stable at ambient conditions. • Temperature and pressure dependences of some macroscopic parameters are achieved. - Abstract: The structural, electronic, elastic and thermodynamic properties of oxo- and thio-spinels have been predicted based on the ultrasoft pseudo-potential scheme as implemented in the CASTEP code. The exchange-correlation potential was treated within the generalized gradient approximation (GGA-PBE). The calculated structural parameters such as lattice constants and internal parameters are in good agreement with the available experimental data. The ground state electronic band structure revealed that CuAl{sub 2}X{sub 4} (XO, S) spinels are direct band gap semiconductors with a transition along Γ-Γ symmetry points. The calculated values of elastic constants satisfy the Born criteria at ambient conditions and confirm that the spinel structures of CuAl{sub 2}O{sub 4} and CuAl{sub 2}S{sub 4} are mechanically stable. The thiospinel structure may have a phase transition under pressure, due to the negative value of C{sub 44}. The influence of temperature and pressure on macroscopic characteristics of CuAl{sub 2}O{sub 4} and CuAl{sub 2}S{sub 4} compounds was estimated using the quasi-harmonic Debye model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A coverage dependent study of the adsorption of pyridine on the (111) coinage metal surfaces

Using density functional theory we explore the adsorption of pyridine (NC 5 H 5 ) on Cu, Ag, and Au(111) surfaces. To study the effect of coverage we run calculations on a 3 × 4 (12 atom), 4 × 4 (16 atom), 5 × 4 (20 atom), and 4 × 6 (24 atom) surface. To examine the role of the van der Waals interaction we use the following vdW inclusive functionals: optB86-vdW, optB88-vdW, optPBE-vdW, revPBE-vdW, rPW86-vdW2, SCAN+rVV10 along with the PBE functional. Regardless of functional, metal, and coverage we find the most energetically stable adsorption site to be a vertical site with the pyridine's N atom directly above a metal atom, which contradicts the available experimental literature. Introducing the vdW interaction lowers the energy gap between the most energetically favorable flat and vertical adsorption configurations. Moving to a higher coverage increases the overall interaction of the pyridine molecule with the surface. We also find that the SCAN+rVV10 functional performs similarly to the optB86b-vdW and optB88-vdW functional. Along with the geometric properties of the substrate/adsorbate system, here we report several electronic properties of the substrate/adsorbate system such as charge transfer from the surface to the molecule, change in the surface's work function, and change in d-band of the atoms in the first layer of the substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗