Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxide Particles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

The effect of solid phase reactions on the ballistic properties of propellants

The combustion of NHClO4 composite propellants was studied between 15 and 3000 psi. The emphasis was on determining the mechanisms by which the fuel components influence the burning rate of the composites. All combustion experiments were performed with pressed powder strands. The fuels affected the combustion mechanism of the composite through their effect on the oxidizer decomposition mechanism, the composite surface temperature, and by reacting heterogeneously with the oxidizer on the surface of the composite. The results indicate that the fuel component has a significant effect on the surface temperature in both catalyzed and uncatalyzed composites. The data suggest that the contribution, to the overall combustion reaction, of heterogeneous reactions increases with increasing pressure. There is also evidence that even in steady state combustion the ignition of individual oxidizer particles is an important parameter in determining the combustion characteristics of the composite.

Schmidt, W. G.↗
NASA NTRS1974

Space shuttle SRM interim contract, part 2

The characteristics of the solid rocket propellant for use with the space shuttle rocket engine are discussed. Design ramifications have created different web thicknesses and motor operating pressures which have necessitated small changes in the required propellant burning rate at 1,000 psia. However, the SRM burning rate remains well within the range demonstrated in the Poseidon and Minuteman first stage motors. Any change in propellant burning rate can be accomplished readily by a slight modification in the oxidizer particle size distribution. The ballistic and mechanical properties of the propellant remain unchanged from the baseline (Configuration 0).

Source record↗
NASA NTRS1975

Combustion problems of nitramine propellants

This study has, as its distinctive feature, a detailed examination of the condensed-phase processes in the combustion of nitramine propellants. As a consequence of a recently developed model for the combustion of ammonium perchlorate (AP)/composite propellants, it is hypothesized that the condensed-phase degradation of the nitramine oxidizer particles to a vaporizable state is the overall rate-limiting step. It is also assumed that the gas-phase details are secondary in importance and need be studied only to the extent of supplying the correct boundary conditions on the condensed-phase/vapor-phase heat transfer. Because of imprecise understanding of the gas-phase processes in the presence of combustion, several plausible models are considered for the gas phase. It is found that all of the gas-phase models considered lead to predictions sufficiently close to experimental trends to conclude that the precise details of gas-phase processes are not of critical importance in determining propellant combustion behavior.

Kumar, R. N.↗
NASA NTRS1976

Corrosion of oxygen-doped tantalum by lithium

The increase in the penetration of tantalum by liquid lithium with increasing oxygen content of tantalum results from the ability of lithium to extract oxygen from tantalum oxides and/or from regions of high oxygen concentrations, accompanied by the creation of minute channels. At low oxygen concentration, oxides are present primarily at the grain boundaries and the lithium penetration is primarily intergranular. At high oxygen concentration, oxides and/or regions of high oxygen concentration are present both at the grain boundaries and within the grains; lithium penetration is both intergranular and transgranular. For a specific oxygen concentration, the severity of corrosion decreases with increasing temperature because (1) the oxygen solubility increases with temperature, decreasing the number of oxide particles and/or regions of high oxygen concentration, and (2) the diffusivity of oxygen in tantalum increases, allowing more rapid oxygen removal at the tantalum lithium interface.

Stecura, S.↗
NASA NTRS1976

Oxidation behavior of nickel-chromium-aluminum-yttrium - Magnesium oxide and nickel-chromium-aluminum-yttrium - zirconate type of cermets

The 1100 and 1200 C cyclic oxidation resistance of dense Ni-Cr-Al-Y - MgO, Ni-Cr-Al-Y - CaZrO3, Ni-Cr-Al-Y - SrZrO3, Ni-Cr-Al-Y - MgZro3 cermets and a 70 percent dense Ni-Cr-Al-Y developmental material was determined. The cermets contained 60 and 50 volume percent of Ni-Cr-Al-Y which formed a matrix with the oxide particles imbedded in it. The cermets containing MgO were superior to cermets based on zirconates and to the porous Ni-Cr-Al-Y material.

Zaplatynsky, I.↗
NASA NTRS1978

Atmospheric scavenging of solid rocket exhaust effluents

Solid propellant rocket exhaust was directly utilized to ascertain raindrop scavenging rates for hydrogen chloride. Two chambers were used to conduct the experiments; a large, rigid walled, spherical chamber stored the exhaust constituents, while the smaller chamber housing all the experiments was charged as required with rocket exhaust HCl. Surface uptake experiments demonstrated an HCl concentration dependence for distilled water. Sea water and brackish water HCl uptake was below the detection limit of the chlorine-ion analysis technique used. Plant life HCl uptake experiments were limited to corn and soybeans. Plant age effectively correlated the HCl uptake data. Metallic corrosion was not significant for single 20 minute exposures to the exhaust HCl under varying relative humidity. Characterization of the aluminum oxide particles substantiated the similarity between the constituents of the small scale rocket and the full size vehicles.

Fenton, D. L.↗
NASA NTRS1979

An oxide dispersion strengthened alloy for gas turbine blades

The strength of the newly developed alloy MA-6000E is derived from a nickel alloy base, an elongated grain structure, naturally occurring precipitates of gamma prime, and an artificial distribution of extremely fine, stable oxide particles. Its composition is Ni-15Cr-2Mo-2Ta-4W-4.5Al-2.5Ti-0.15Zr 0.05C-0.01B-1.1Y2O3. It exhibits the strength of a conventional nickel-base alloy at 1400 F but is quite superior at 2000 F. Its shear strength is relatively low, necessitating consideration of special joining procedures. Its high cycle, low cycle, and thermal fatigue properties are excellent. The relationship between alloy microstructure and properties is discussed.

Glasgow, T. K.↗
NASA NTRS1979

An oxide dispersion strengthened alloy for gas turbine blades

The strength of the newly developed alloy MA-6000E is derived from a nickel alloy base, an enlongated grain structure, naturally occurring precipitates of gamma prime, and an artificial distribution of extremely fine, stable oxide particles. Its composition is Ni-15% Cr-2% Mo-2% Ta-4% W-4.5% Al-2.5% Ti-0.15% Zr-0.05% C-0.01% B-1.1% Y2O3. It exhibits strength of a conventional nickel-base alloy at 1400 F, but is quite superior at 2000 F. Its shear strength is relatively low, necessitating consideration of special joining procedures. Its high-cycle, low-cycle, and thermal fatigue properties are excellent. The relationship between alloy micro-structure and properties is discussed.

Glasgow, T. K.↗
NASA NTRS1980

Analysis of the measured effects of the principal exhaust effluents from solid rocket motors

The feasibility of conducting environmental chamber tests using a small rocket motor to study the physical processes which occur when the exhaust products from solid motors mix with the ambient atmosphere was investigated. Of particular interest was the interaction between hydrogen chloride, aluminum oxide, and water vapor. Several types of instruments for measuring HCl concentrations were evaluated. Under some conditions it was noted that acid aerosols were formed in the ground cloud. These droplets condensed on Al2O3 nuclei and were associated with the rocket exhaust cooling during the period of plume rise to stabilization. Outdoor firings of the solid rocket motors of a 6.4 percent scaled model of the space shuttle were monitored to study the interaction of the exhaust effluents with vegetation downwind of the test site. Data concerning aluminum oxide particles produced by solid rocket motors were evaluated.

Dawbarn, R.↗
NASA NTRS1980

Predicted and measured effects of pressure and crossflow velocity on composite propellant burning rate

A theoretical model for prediction of burning rates of composite (ammonium perchlorate oxidizer) solid propellants as a function of pressure and crossflow velocity was developed. Included in this model is the capability for treatment of multimodal oxidizer particle sizes and metalized formulations. In addition, an experimental device for measuring the effects of crossflow velocity on propellant burning rate was developed and used to characterize a series of AP/HTPB propellants with systematically varied formulation parameters. Model predictions of zero-crossflow burning rate versus pressure characteristics were found to be in agreement with data, while the agreement between erosive burning predictions and data is, in general, good. The experimental data indicate that the dominant factor influencing the sensitivity of composite propellant burning rate to crossflow is the base (no-crossflow) burning rate versus pressure characteristics of the propellant (lower base burning rate leading to increased crossflow sensitivity). Finally, the model was used to examine the effects of motor scaling on erosive burning: erosive burning is predicted to diminish with increasing motor size, in agreement with experience.

King, M. K.↗
NASA NTRS1980

Experimental determination of the admittances of aluminized propellants by the impedance tube method

The adaptation of the impedance tube concept for the determination of the pressure coupled admittances and response functions of burning solid propellants is discussed. The results obtained in experiments with UTP-3001 and UTP-19360 aluminized propellants are presented. It is shown that the admittance Y remains constant during the quasi-steady burn period of a test, indicating constant driving of the gas phase disturbance by the burning solid propellant. The measured real part of the admittance is positive, indicating that the burning aluminized propellant is driving the gas phase oscillations. In addition, the measured high gas phase damping, provided by the aluminum oxide particles in the gas phase, suggests that the latter can significantly increase the damping in unstable solid rockets over the investigated frequency range. Finally, it is shown that the wave structure obtained by numerically solving the impedance tube wave equations which utilize the determined propellant admittance as an initial condition and the determined value of G to describe the gas phase losses is in excellent agreement with the measured wave structure.

Baum, J. D.↗
NASA NTRS1981

A pocket model for aluminum agglomeration in composite propellants

This paper presents a model for the purpose of estimating the fraction of aluminum powder that will form agglomerates at the surface of deflagrating composite propellants. The basic idea is that the fraction agglomerated depends upon the amount of aluminum that melts within effective binder pocket volumes framed by oxidizer particles. The effective pocket depends upon the ability of ammonium perchlorate modals to encapsulate the aluminum and provide a local temperature sufficient to ignite the aluminum. Model results are discussed in the light of data showing effects of propellant formulation variables and pressure.

Cohen, N. S.↗