Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Multi-material direct ink writing and co-sintering of gadolinium oxide – zirconium oxide components

Methods for fabrication of multi-material or functionally graded ceramic composite architectures are of interest for numerous applications. However, conventional co-sintering of multi-material ceramic parts is a challenge because differences in the sintering behavior of the two materials leads to interfacial strain and, ultimately, component failure. Direct ink writing (DIW) is an extrusion-based additive manufacturing process that excels at multi-material printing because multiple extrusion nozzles can be installed on the same gantry system. Furthermore, the use of DIW as a method to fabricate multi-material ceramic green bodies offers an additional variable for controlling and potentially matching sintering kinetics in the slurry formulation used for two dissimilar feedstocks. In the work documented in this manuscript, we explored two strategies to successfully co-sinter multi-material ceramic oxides: slurry optimization to match sintering kinetics and material gradients to step from one material to another. This manuscript also quantifies the allowable mismatch that avoids part cracking in solid solution forming multi-material systems and discusses best strategies to reduce mismatch during co-sintering. Inks composed of gadolinium oxide (Gd 2 O 3 ) and zirconium oxide (ZrO 2 ), a surrogate for uranium oxide (UO 2 ), were thermally matched, which resulted in a sintering mismatch reduction of over 10%. It was found that ~1% mismatch is tolerable during debind cycles and that ~5% mismatch is manageable during sintering cycles after slurry formulations are optimized to match the sintering behavior. Use of continuous gradients is shown to reduce sintering mismatch, although geometric resolution may be lost due to solid solution formation.

Snarr, Patrick L. [Oak Ridge National Laboratory (↗
DOE OSTI2020

Sharp-tip enhanced catalytic CO oxidation by atomically dispersed Pt 1 /Pt 2 on a raised graphene oxide platform

Revealing structure–activity relationships of graphene-supported atomically dispersed transition metal catalysts is of key importance in catalysis chemistry and materials science. In this work, we report a first-principles theoretical study on O 2 activation and CO oxidation catalyzed by atomically dispersed Pt 1 /Pt 2 anchored on a raised graphene (Gr) platform. The unique sharp-tip structure of the protuberant graphene platform (carbon-tip) can collect extra polarization electrons on the Pt-tip, promoting electron transfer between the catalyst and adsorbates, and greatly enhancing the chemical activity. Higher carbon-tips on defective graphene oxide with a carbon vacancy (Gr-V) produce more polarization electrons, a more localized electric field, and a larger up-shift of the d-orbital center of the Pt-tip, resulting in better catalytic performance. The carbon-tip enhancement reduces the energy barrier for the CO oxidation on Pt 1 O 2 /Gr-V from 1.19 eV to 0.56 eV compared with Pt 1 on planar Gr. In addition, CO poisoning is significantly alleviated, with the CO poisoning rate Γ θ reduced from 2.00 eV to 0.52 eV. Moreover, a linear relationship between the activation barrier and the binding energy of adsorbates is found for various atomically dispersed Pt-tip catalysts on the raised graphene oxide platform. Importantly, the order of catalytic activity is consistent with the carbon-tip enhancement, i.e., Pt 1 O 2 /Gr-V > Pt 2 O 4 /Gr-V > Pt 1 O 2 /Gr > Pt 2 O 4 /Gr. These findings provide important guidance for rational design of atomically dispersed catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Resolving Electron Injection from Singlet Fission-Borne Triplets into Mesoporous Transparent Conducting Oxides

Photoinduced electron transfer from a molecular chromophore into mesoporous metal oxide substrates occurs efficiently from both singlet and triplet excited states for traditional metal-to-ligand charge transfer (MLCT) dyes. All organic molecules that undergo singlet fission (SF), the process of generating two triplet excitons with photoexcitation of one singlet exciton, offers a promising method of generating two charges per one absorbed photon. However, the singlet-triplet energy balance required to drive SF often places the driving force for triplet electron injection into metal oxides too low. As such, the dynamics of singlet vs. triplet electron transfer for SF in dye-sensitized solar cell configurations has not been elucidated. Here, we use applied bias transient absorption spectroscopy to modulate the driving force for triplet electron transfer from an anthradithiophene-based SF chromophore (ADT-COOH) adsorbed to mesoporous indium tin oxide (nanoITO).

CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SU↗
DOE OSTI2025

Large-scale experimental validation of thermochemical water-splitting oxides discovered by defect graph neural networks

Thermochemical water-splitting (TCH) based on 2-step thermal redox cycles in metal oxides is a promising approach to generating H 2 , but state-of-the-art (SOTA) CeO 2 has several practical limitations, which has motivated continued materials discovery efforts in this field. Here, in this study, we improve upon a SOTA defect graph neural network (dGNN) surrogate model's oxygen vacancy predictions and combine them with materials project phase diagrams to down-select and discover structurally diverse, experimentally known metal oxides whose TCH performance was previously unknown. Amongst twelve candidates selected based on our high-throughput screening and down-selection criteria, we achieved ∼80% accuracy in identifying materials with stable redox cycling and hydrogen production in stagnation flow reactor water-splitting experiments. Closer to 100% accuracy can be achieved if higher-accuracy, hybrid DFT-predicted vacancy formation energies were computed and used in lieu of the most uncertain dGNN-based screening predictions, as they correct false positives to true negatives. Notably, two discovered candidates, Sr 3 PrMn 2 O 8 and Ba 2 Fe 2 O 5 , display hydrogen yields greater than CeO 2 under specific redox conditions. In conclusion, these results demonstrate our ability to computationally predict and experimentally validate promising candidate TCH materials that have the potential to compete with CeO 2 .

08 HYDROGEN↗
DOE OSTI2020

Soft x-ray absorption spectroscopy and magnetic circular dichroism as operando probes of complex oxide electrolyte gate transistors

Electrolyte-based transistors utilizing ionic liquids/gels have been highly successful in the study of charge-density-controlled phenomena, particularly in oxides. Experimental probes beyond transport have played a significant role, despite challenges in their application in electric double-layer transistors. Here, we demonstrate the application of synchrotron soft x-ray absorption spectroscopy (XAS) and x-ray magnetic circular dichroism (XMCD) as operando probes of the charge state and magnetism in ion-gel-gated ferromagnetic perovskite films. Electrochemical response via oxygen vacancies at positive gate bias in LaAlO 3 (001)/La 0.5 Sr 0.5 CoO 3-δ is used as a test case. XAS/XMCD measurements of 4–25 unit-cell-thick films first probe the evolution of hole doping (from the O K-edge pre-peak) and ferromagnetism (at the Co L-edges), to establish a baseline. Operando soft XAS/XMCD of electrolyte-gated films is then demonstrated, using optimized spin-coated gels with a thickness of ~1 μm and a specific composition. The application of gate voltages up to +4 V is shown to dramatically suppress the O K-edge XAS pre-peak intensity and Co L-edge XMCD, thus enabling the Co valence and ferromagnetism to be tracked upon gate-induced reduction. Soft XAS and XMCD, with appropriate electrolyte design, are thus established to be viable for the operando characterization of electrolyte-gated oxides.

Yu, Biqiong↗
DOE OSTI2021

Guiding the design of oxidation-resistant Fe-based single atom alloy catalysts with insights from configurational space

The high activity and selectivity of Fe-based heterogeneous catalysts toward a variety of reactions that require the breaking of strong bonds are offset in large part by their considerable instability with respect to oxidative deactivation. While it has been shown that the stability of Fe catalysts is considerably enhanced by alloying them with precious metals (even at the single-atom limit), rational design criteria for choosing such secondary metals are still missing. Since oxidative deactivation occurs due to the strong binding of oxygen to Fe and reduction by adsorbed hydrogen mitigates the deactivation, we propose here to use the binding affinity of oxygen and hydrogen adatoms as the basis for rational design. As it would also be beneficial to use cheaper secondary metals, we have scanned over a large subset of 3d–5d mid-to late transition metal single atoms and computationally determined their effect on the oxygen and hydrogen adlayer binding as a function of chemical potential and adsorbate coverage. We further determine the underlying chemical origins that are responsible for these effects and connect them to experimentally tunable quantities. Our results reveal a reliable periodic trend wherein oxygen binding is weakened greatest as one moves right and down the periodic table. Hydrogen binding shows the same trend only at high (but relevant) coverages and otherwise tends to have its binding slightly increased in all systems. Trends with secondary metal coverage are also uncovered and connected to experimentally tunable parameters.

Hensley, Alyssa↗
DOE OSTI2023

Electro-Oxidative Dehydrogenation of Ethane to Ethylene Using Lanthanum-Strontium-Iron Oxide Perovskite Electrocatalysts

Developing alternative, industrially viable ethylene production routes has received important research attention. One chemical pathway of interest is the oxidative dehydrogenation (ODH) of ethane, although issues such as product selectivity, combustion hazards, and oxidizer supply have hindered the practical scale-up of this technology. The presented work describes the use of a solid oxide fuel cell (SOFC) platform employing lanthanum-strontium-iron oxide perovskite (La 1-x Sr x FeO 3-δ , or LSFx) electrocatalysts to perform electrochemical-ODH (e-ODH), a process design that has the potential to address the challenges of ODH implementation. The effects of La and Sr stoichiometry, operating temperature, and current density are reported. The highest performance was observed using a La:Sr ratio of 0.50 (LSF0.50) at 750 °C and a current density of 0.50 A·cm –2 , achieving an ethane conversion of 18.7 ± 0.3%, ethylene selectivity of 91.4 ± 1.9%, and ethylene yield of 17.1 ± 0.1%. These results demonstrate several potential advantages for utilizing a SOFC platform to perform e-ODH of ethane to ethylene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Catalytic Selective Oxidations with Porous Transition Metal Oxides

This final report covers work done concerning oxidation catalysis over the past year. There are three major areas involving synthesis, characterization, and catalysis. The synthetic focus has been on porous metal oxides. Full characterization of these systems using a variety of methods has been done using ex-situ, in situ, and operando conditions. A major goal of the work has been to study the mechanisms of catalytic oxidations including identification of reaction intermediates. Specific applications besides oxidations concern electrocatalytic water splitting, water harvesting, CO 2 capture, and environmental catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Simulating Oxidation of Carbon Surfaces by Atomic Oxygen Coupled with a Finite Rate Oxidation Model

Oxidation is a prominent factor in degradation of carbon based ablative materials at high temperatures, resulting in mass loss and material recession through chemical and mechanical erosion. In this paper, a finite rate carbon oxidation model coupled with surface recession is implemented in the Porous Ablation and Thermal Response (Panther) software to investigate carbon oxidation by atomic oxygen over a range of temperatures and pressures. Panther is utilized to investigate the finite rate oxidation model proposed by Swaminathan-Gopalan et al. at conditions of higher pressure and flux relative to the experiments it was built on.

Kirmanoglu, Kaan K.↗
DOE OSTI2021

Pt Catalysts Modified with Manganese Oxide through Atomic Layer Deposition for CO Oxidation: Establishing a Coating Layer above or below Pt

The effect of atomic layer deposition (ALD) of manganese oxide on CO oxidation over Pt/Al2O3 is investigated. Two types of catalysts with a thin MnOx layer coated on or under the Pt nanoparticles (NPs) are prepared, and a pristine Pt/Al2O3 catalyst is used as a reference sample. The addition of the ALD layers improves the catalyst durability and both catalysts with MnOx exhibit greater stability after thermal aging at 1073-K. Besides, MnOx promotes CO oxidation through active Pt-MnOx interfacial sites, showing a reaction rate up to 35-fold faster than that of unmodified Pt. Interestingly, the CO adsorption ability of the Pt catalysts with MnOx overcoats is greatly suppressed after the high-temperature calcination; however, the reaction rate of CO oxidation is still excellent. This phenomenon is because the uniformly covered MnOx with two atomic layers diminishes the exposed Pt surface, but the reaction near the Pt-MnOx interfacial site still occurs. Our results guide the effective use of ALD, which is actively applied to heterogeneous catalysis, and provide a novel direction to control metal-assisted interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Antiferromagnetic Inverse Spinel Oxide LiCoVO 4 with Spin-Polarized Channels for Water Oxidation

Exploring highly efficient catalysts for the oxygen evolution reaction (OER) is essential for water electrolysis. Cost-effective transition-metal oxides with reasonable activity are raising attention. Recently, OER reactants' and products' differing spin configurations have been thought to cause slow reaction kinetics. Catalysts with magnetically polarized channels could selectively remove electrons with opposite magnetic moment and conserve overall spin during OER, enhancing triplet state oxygen molecule evolution. Herein, antiferromagnetic inverse spinel oxide LiCoVO 4 is found to contain d 7 Co 2+ ions that can be stabilized under active octahedral sites, possessing high spin states S = 3/2 (t 2g 5 e g 2 ). With high spin configuration, each Co 2+ ion has an ideal magnetic moment of 3 µ B , allowing the edge-shared Co 2+ octahedra in spinel to be magnetically polarized. Density functional theory simulation results show that the layered antiferromagnetic LiCoVO 4 studied contains magnetically polarized channels. The average magnetic moment (µ ave ) per transition-metal atom in the spin conduction channel is around 2.66 µ B . Such channels are able to enhance the selective removal of spin-oriented electrons from the reactants during the OER, which facilitates the accumulation of appropriate magnetic moments for triplet oxygen molecule evolution. Finally, the LiCoVO 4 reported has been identified as an oxide catalyst with excellent OER activity.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Oxidation of Cyclopentene with Manganese Oxides Octahedral Molecular Sieves with Layer and Tunnel Structures

We report manganese oxides type octahedral molecular sieves OL-1, OMS-1, and OMS-2 were synthesized, impregnated with sodium tungstate, and evaluated as catalysts for the selective epoxidation of cyclopentene (CPE) to cyclopentene oxide (CPO) in the sodium bicarbonate/hydrogen peroxide (BAP) system. OL-1 was the best catalyst with a conversion of 78.6 % and a selectivity to CPO of 31.4 %. Impregnation with sodium tungstate affected the structure and activity of OL-1 and OMS-1. Mn 2+ is required for the epoxidation of CPE. FTIR spectra provides evidence that tungstate ions react, during impregnation, with Mg 2+ and/or Mn 2+ present in OMS-1 and OL-1 producing an amorphous compound that is not active in the epoxidation reaction. The crystalline and chemical structure of OMS-2 was not affected by tungstate impregnation, since most of the manganese occurs as Mn 3+ and Mn 4+ , which in presence of hydrogen peroxide, tend to form radicals, active in the total oxidation of organic compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Machine learning informed rational design of high entropy double perovskite oxide universal air/steam electrodes for solid oxide electrochemical cells

Due to their high efficiency and versatility, solid oxide electrochemical cells (SOCs) are poised to play a significant role in future energy conversion and storage applications. In recent years, SOCs have bifurcated into two distinct categories: traditional oxygen-ion conducting SOCs that typically operate from ∼650—850 °C and the more recent proton-conducting ceramic (PCC) SOCs that typically operate from ∼400—650 °C. Current performance and lifetime of both oxygen-ion conducting SOCs and PCCs is primarily limited by the air/steam electrode, which facilitates the oxygen reduction reaction (ORR) during fuel cell operation and must also facilitate the oxygen evolution reaction (OER) during electrolysis operation. Here, we present a newly designed high-entropy double perovskite oxide suitable as a universal ORR/OER electrode for both oxygen-ion conducting SOCs and PCCs. Machine learning methods are applied to identify chemical descriptors for highly catalytic high-entropy double perovskite oxides (AA’B 2 O 6 ) across a large compositional space. Based on the machine-learning guidance, we ultimately converge on Ba 0.9 Cs 0.1 (Ca 0.2 Gd 0.2 La 0.2 Pr 0.2 Sr 0.2 )Co 1.5 Fe 0.5 O 6 (CsBaHEO) as a universal air/steam electrode. Structure stabilization is accomplished by an equimolar five-cation high-entropy composition on the A’-site, while cesium substitution on the A-site enhances the electrical conductivity and leads to a higher oxygen vacancy concentration. This material exhibits versatility and high performance in reversible oxygen-ion SOCs, reversible PCCs, and also large-scale tubular PCCs. For example, the CsBaHEO-based PCC reaches 1018 mW∙cm −2 at 600°C, while a large-scale tubular PCC using CsBaHEO for electrolysis achieves a hydrogen production rate of 21.314 ML∙min −1 at 600 °C.

Cell↗
DOE OSTI2022

Improving bamboo’s fuel and storage properties with a net energy export through torrefaction paired with catalytic oxidation

Using torrefied char, or biocoal, as solid fuel provides an opportunity to introduce a sustainable feedstock into the energy market. The goals of this study were to investigate how torrefaction improves the energy content and the grindability of a Malaysian bamboo along with understanding the potential for integrated energy recovery from torrefaction gases. The feedstock was torrefied at 250–290 °C for 1 h and the combustion characteristics and grindability of the solid products along with the composition of torrefied gas species were measured. The results showed a beneficial increase in elemental carbon increased from 47 to 63 wt% at 290 °C torrefaction, reflecting an increase in higher heating value from 17.8 to 25.6 MJ/kg. The combustion behavior of all the products appeared to show three distinct combustion zones; however, torrefaction severity leading to higher combustion temperature and time as the fixed carbon augmented with the increase of torrefaction temperature. This increase in severity also lead to more friable and grindable material, and the 290 °C condition required a factor of 2.7 less hold-up time in the mill compared to the raw bamboo, and a factor of 8.5 less energy (938 and 111 kWh/tonne respectively). Through analysis of the gas and volatile formation, a case study showed that catalytic oxidation can convert nearly 100% of the embodied chemical energy into usable thermal energy. These experimental findings were scaled to a 100,000 tonne/y capacity torrefaction plant and in the moderate case of 270 °C operating temperature, the plant has 1.25 GJ/tonne excess energy beyond what the process needs.

09 BIOMASS FUELS↗
DOE OSTI2023

Modelling and analysis of salt-convection effect on oxide reduction process for uranium oxides using smoothed particle hydrodynamics

Oxygen ion transport via molten salt continuum is a key kinetic feature of electrochemical reduction process for uranium oxides in molten salt. During the electrolysis, the evolution of oxygen ion concentration field in molten salt continuum appears from porous metallic layer to open bulk salt. Despite the important role affecting process throughput, its effect coupled with controlled salt movement was not adequately investigated. To capture the reactive oxygen ion transport phenomena, a multidimensional reduction model based on smoothed particle hydrodynamics (SPH) was combined with the advection-diffusion model. A pelletized oxide fuel bed capturing interconnected salt continuum is considered as a reactant material geometry, which allows forced convective delivery of molten salt through the reactant materials with a relatively low pressure head. Here, in this study, reduction time of a pelletized-fuel bed was quantified with respect to key design parameters of the reactant material configuration. The simulation results demonstrated the advantage of salt convection which effectively removes oxygen ion products from the reactant materials and consequently accelerates the reduction process. Moreover, the reduction-time correlation of a single pelletized fuel was developed as a function of relevant dimensionless parameters and was extended to the application for a pelletized-fuel bed. Finally, several insights and implications in the use of a pelletized oxide fuel were presented. The developed SPH-based framework enabled multi-physics analysis of governing dynamics in appreciating and screening candidate reactant material configurations in a cost-effective manner.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Electrochemically Mediated Oxidation of Sensitive Propargylic Benzylic Alcohols

The electrochemical oxidation of sensitive propargylic benzylic alcohols having varying substituents is reported. We describe the preparation and characterization of N-hydroxytetrafluorophthalimide (TFNHPI) and pseudo-high-throughput development of a green electrochemical oxidation protocol for sensitive propargylic benzylic alcohols that employs TFNHPI as a stable electrochemical mediator. Here, the electrochemical oxidation of propargylic benzylic alcohols was leveraged to develop short synthetic pathways for preparing gram quantities of resveratrol natural products such as pauciflorols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

CeTi 2 O 6 —A Promising Oxide for Solar Thermochemical Hydrogen Production

A large entropy of reduction is crucial in achieving materials capable of high-efficiency solar thermochemical hydrogen (STCH) production through two-step thermochemical water splitting cycles. We have recently demonstrated that the onsite electronic entropy of reduction attains an extreme value of 4.26 kB at 1500 K in Ce 4+ → Ce 3+ redox reactions, which explains the high performance and uniqueness of CeO 2 as an archetypal STCH material. However, ceria requires high temperatures (T > 1500 °C) to achieve a reasonable reduction extent because of its large reduction enthalpy, which is a major obstacle in practical applications. Therefore, new materials with a large entropy of reduction and lower reduction enthalpy are required. Here, we perform a systematic screening to search for Ce 4+ -based oxides which possess thermodynamics superior to CeO 2 for STCH production. We first search the Inorganic Crystal Structure Database (ICSD) and literature for Ce 4+ -based oxides and subsequently use density functional theory to compute their reduction enthalpies (i.e., oxygen vacancy formation energies). Here, we find that CeTi 2 O 6 with the brannerite structure is the most promising candidate for STCH because it possesses three essential characteristics of an STCH material: (i) a smaller reduction enthalpy compared to ceria yet large enough to split water, (ii) a high thermal stability, as reported experimentally, and (iii) a large entropy of reduction associated with Ce 4+ → Ce 3+ redox. Our proposed design strategy suggests that further exploration of Ce 4+ oxides for STCH production is warranted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗