Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ore”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Mechanism and kinetic study of rare earth extraction from allanite by direct acid leaching

Direct acid leaching was conducted to recover rare earth elements (REEs) from an allanite ore assaying 9,861.4 ppm of REEs. The effects of operational variables such as acid type, sulfuric acid (H 2 SO 4 ) concentration, temperature, solid/liquid (S/L) ratio, and particle size on the total REE (TREE) recovery were systematically examined. The REE mineralogy and the involved leaching mechanisms were investigated by microscopic characterization and residue re-leaching tests. It was found that approximately 80% of REEs was extracted using 1 M H 2 SO 4 at 75 °C for 2 h. Increasing temperature significantly improved the REE extraction, while changing acid type, H 2 SO 4 concentration, and particle size did not. The TREE recovery also gradually decreased at higher S/L ratios. The low fraction of Si leached (<4.0%) suggested that the extraction did not significantly alter the crystal structure of the dominant mineral. The leaching kinetics of REEs were fast within the first 10 min, followed by a much slower stage (i.e., 10-120 min). The kinetic modeling results showed that each stage may be controlled by both chemical reaction and diffusion (i.e., mix control). The activation energies for REE leaching using 1 M H 2 SO 4 in the 0-10 min and 10-120 min were determined to be 20.3 and 10.8 kJ/mol, respectively. Finally, the residue re-leaching results suggested that the fast leaching kinetics at the beginning may be explained by the preferential decomposition of metamict allanite rather than the formation of silica gel, while the following slower leaching stage was due to the dissolution of difficult-to-leach REE-bearing minerals such as well-crystallized allanite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

U.S. lithium resources from geothermal and extraction feasibility

As the demand for electric vehicles (EVs) increases, demand for lithium (Li) is expected to grow over the coming decade. To satisfy the demand for rechargeable batteries, it is imperative to devise solutions for sufficient Li production. Additionally, even though commercial Li currently comes from conventional saline salar brine and spodumene ore extractions, efforts to retrieve Li from geothermal brines are increasing in popularity. In this paper, we evaluate the United States’ potential to supply Li from geothermal brines using Systems Dynamics modeling. The main goals are to assess (1) the viability of US Li supply from geothermal brines and (2) the potential supply chain impact of extracting Li from this source. Results show that Li supply from geothermal brines could (1) reach around 4% to 8% of total US Li supply and (2) be economically viable.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Life-cycle analysis of battery metal recycling with lithium recovery from a spent lithium-ion battery

Demand for critical materials (nickel, cobalt, manganese [NCM], and lithium) for use in batteries is increasing rapidly due to the expansion of the battery-electric vehicles market. Battery metal recycling (BMR) is an important technology that can potentially realize environmental and economic benefits in cathode active material (LiNi x Mn y Co z O 2 ) production using recycled materials. While current major battery recycling technologies recover cathode materials (NCM) and other metals (steel, aluminum, copper, etc.) from the spent battery, the lithium (Li) recovery rate is less than 1% in the world. In this study, we analyze the environmental benefits of a BMR process that recovers lithium in the form of lithium hydroxide monohydrate (LiOH∙H 2 O) along with other cathode materials. Using life-cycle analysis (LCA), we evaluate the life-cycle greenhouse gas (GHG) emissions, criteria air pollutant emissions, and water consumption of the new BMR technology in terms of lithium hydroxide production and cathode active material production. The LCA results show that the life-cycle GHG emissions recycled LiOH are 37–72% lower than those of virgin LiOH production from Chilean brine and Australian ore, respectively. In addition, the life-cycle GHG emissions of NCM811 produced using the recycled materials are 40–48% lower compared to virgin cathode active material production. Furthermore, recovering lithium from the spent batteries reduces associated air pollutant emissions and water consumption relative to using the virgin materials or materials from other recycling technologies without LiOH recovery.

25 ENERGY STORAGE↗
DOE OSTI2021

Quantification of manganese for ChemCam Mars and laboratory spectra using a multivariate model

In this work, we report a new calibration model for manganese using the laser-induced breakdown spectroscopy instrument that is part of the ChemCam instrument suite onboard the NASA Curiosity rover. The model has been trained using an expanded set of 523 manganese-bearing rock, mineral, metal ore, and synthetic standards. The optimal calibration model uses the Partial Least Squares (PLS) and Least Absolute Shrinkage and Selection Operator (LASSO) multivariate techniques, with a novel “double blending” technique. We determined the detection limit for manganese is 82 ppm using a method blank procedure and is possibly as low as 27 ppm based on visual inspection of the spectra. Based on a representative test set consisting of measurements on 93 standards, the double blended multivariate model shows a Root Mean Squared Error of Prediction (RMSEP) accuracy of 1.39 wt% MnO for the full blended model. Employing a local RMSEP estimate where the model performance is evaluated based on nearby test samples, the accuracy is 0.03 wt% at the quantification limit (0.05 wt% MnO), 0.4 wt% accuracy at 1.0 wt% MnO, and 4.4 wt% accuracy at 100 wt% MnO. Precision is estimated using the standard deviation of the test set measurements, and is ±0.01 wt% MnO at the quantification limit, ±0.09 wt% MnO at 1.0 wt% MnO, and ± 2.1 wt% MnO at 100 wt% MnO (all 1 standard deviation). This new calibration is important for understanding the variation of manganese in the bedrock with the Curiosity rover on Mars, which provides insight into past redox conditions on Mars.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Post-landing major element quantification using SuperCam laser induced breakdown spectroscopy

The SuperCam instrument on the Perseverance Mars 2020 rover uses a pulsed 1064 nm laser to ablate targets at a distance and conduct laser induced breakdown spectroscopy (LIBS) by analyzing the light from the resulting plasma. SuperCam LIBS spectra are preprocessed to remove ambient light, noise, and the continuum signal present in LIBS observations. Prior to quantification, spectra are masked to remove noisier spectrometer regions and spectra are normalized to minimize signal fluctuations and effects of target distance. In some cases, the spectra are also standardized or binned prior to quantification. To determine quantitative elemental compositions of diverse geologic materials at Jezero crater, Mars, we use a suite of 1198 laboratory spectra of 334 well-characterized reference samples. The samples were selected to span a wide range of compositions and include typical silicate rocks, pure minerals (e.g., silicates, sulfates, carbonates, oxides), more unusual compositions (e.g., Mn ore and sodalite), and replicates of the sintered SuperCam calibration targets (SCCTs) onboard the rover. For each major element (SiO 2 , TiO 2 , Al 2 O 3 , FeO T , MgO, CaO, Na 2 O, K 2 O), the database was subdivided into five “folds” with similar distributions of the element of interest. One fold was held out as an independent test set, and the remaining four folds were used to optimize multivariate regression models relating the spectrum to the composition. We considered a variety of models, and selected several for further investigation for each element, based primarily on the root mean squared error of prediction (RMSEP) on the test set, when analyzed at 3 m. In cases with several models of comparable performance at 3 m, we incorporated the SCCT performance at different distances to choose the preferred model. Shortly after landing on Mars and collecting initial spectra of geologic targets, we selected one model per element. Subsequently, with additional data from geologic targets, some models were revised to ensure results that are more consistent with geochemical constraints. The calibration discussed here is a snapshot of an ongoing effort to deliver the most accurate chemical compositions with SuperCam LIBS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Selective recovery of rare earth elements with ligand-functionalized polymers in fixed-bed adsorption columns

Rare earth elements (REE) are a group of valuable metals with growing demand and broad applications. Mineral ores, the traditional sources of REE, require significant capital investment and their refinement has been a source of environmental contamination. Industrial fluids and natural REE-bearing liquids are potential alternative sources for these metals. This work investigated the performance and REE selectivity of polymer resin beads functionalized with N,N-bis(phosponomethyl)glycine (BPG) for extraction of REE from saline solutions in fixed-bed adsorption columns. Competitive batch adsorption experiments were conducted with various metals (Nd, Gd, Ho, Al, Fe, Co, Ni, Ba, Pb, Th, and U) and the BPG-functionalized resins were up to 137 times more selective for REE than aminated resins. In column experiments, the BPG-functionalized resins preferentially adsorbed heavier metals and REE were strongly retained in the functionalized column, taking 270 times longer than the amine column to reach 10% breakthrough and 128 times longer to reach 50% breakthrough. REE bound to the BPG-functionalized resins were recovered with a dilute HNO3 solution, yielding REE concentrations up to 236 times higher than the influent feedstock. This work provides new insight into the operational performance of novel functionalized adsorbents for recovery of REE from saline fluids.

42 ENGINEERING↗
DOE OSTI2023

Protein-based approach for high-purity Sc, Y, and grouped lanthanide separation

Rare earth elements (REEs: Sc, Y, La- Lu) are irreplaceable components in many clean energy and consumer technologies. However, the extraction and subsequent separation of individual REEs from ore-based feedstocks remains a significant economic and environmental challenge. Here in this work, we investigated the intra-REE separation potential of lanmodulin (LanM), a natural protein from Methylorubrum extorquens that has emerged as a sustainable potential alternative to conventional solvent extraction-based separation. By determining the intra-REE selectivity of immobilized LanM and systematically testing pH-based and small chelator-based (i.e., citrate and malonate) desorption processes, we established the framework and methodology for achieving select individual and grouped REE separations from a mixed REE feedstock. We show that Sc forms the tightest complex with LanM among REEs but can be readily and selectively desorbed using malonate to generate high-purity Sc (>99 % purity, >99 % yield) in a single adsorption/desorption cycle. We further show that the intrinsic REE selectivity of LanM is sufficient to achieve heavy REE (HREE) separation from light and middle REEs (L-MREEs), yielding an yttrium-enriched product. This separation effect is further magnified by pairing LanM’s unique M-LREE preference with a HREE-preferring chelator in the desorption process, which enriches HREE and MREE fractions relative to low value, abundant La/Ce. Finally, by combining pH- and citrate-based desorption processes in a two-cycle separation scheme, we demonstrate the generation of fractions highly enriched in Y, Gd-Lu, Pr-Eu, and La-Ce. Collectively, these data support the application of a LanM-based approach for achieving impactful REE separations from mixed REE feedstocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

New directions and principles for solvent extraction for recovery of lithium from aqueous brines and mineral leachates: A brief review

Increasing demand for lithium for manufacturing of batteries is fueling the unprecedented search for improved recovery and alternative sources. Wider source distribution, lower energy consumption, and greater sustainability make extraction of lithium from brines, both natural and process-derived, an attractive alternative to mineral ores. Solvent extraction, used industrially for production of metals, salts, and pharmaceuticals, has been investigated as a methodology for lithium recovery for several decades. However, industrial application of solvent extraction for lithium recovery has so far been limited. In contrast, direct lithium extraction using adsorbents based on inorganic minerals has rapidly advanced from research to commercialization. A comparison of solvent extraction processes to adsorption highlights these issues and explains the preference for adsorbents. Although the application of solvent extraction has been criticized for use of large amounts of acid, alkali, and organic solvents, steady progress has been made to improve its potential for industrial lithium production, spurred on generally by the advantages of solvent extraction in selectivity and throughput. Previously developed beta-diketone, organophosphate, and crown ether ligands are being adapted and improved. Their novel use with ionic liquids, deep eutectic solvents, and membrane technologies promises to expand capabilities for extraction of lithium from dilute aqueous sources while improving sustainability. Possibilities for further discovery and innovation abound. In this review, we provide a unique perspective from the field of solvent extraction starting with fundamentals such as ion-transfer theory and apply them to understanding lithium selectivity and extraction behavior. In conclusion, the results are cast in the light of the practical realities of developing economical solvent extraction processes.

Brine↗
DOE OSTI2025

Rapid, efficient reduction of iron oxide with ammonia

Reducing iron oxide to iron metal with fossil fuels produces circa 4% of annual anthropogenic CO 2 , ca. 2 Gt/a, as direct chemical emissions from the process. Using ammonia instead of coke—releasing only water and nitrogen as byproducts—could be a widely deployable method of decarbonizing industrial ironmaking, because ammonia carries hydrogen and can be transported easily worldwide. However, initial reports suggest that the reaction of ammonia with iron oxide is slow and inefficient, completed only in hours and using only a few percent of the ammonia supplied. Drawing on thermodynamic and kinetic analysis of the reaction, we explored high-temperature, high-flow reaction conditions designed to increase the reaction rate and the ammonia utilization. We report the reduction of iron oxide in 1 min while using 64% of the ammonia supplied. We show that these insights translate to the gram scale and the reduction of pelletized ore, a common form used industrially.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Lead Isotope Fingerprinting of Nanoscale Mineral Particles via Single Particle Inductively Coupled Plasma Mass Spectrometry

Determining lead (Pb) isotopic ratios is of broad interest across chemical disciplines for source tracing and age determinations, but the technique is inherently limited when multiple sources of Pb are present in a single sample. Single particle methods offer a solution to directly resolve multiple distinct isotopic ratios within individual samples. In this study, single particle inductively coupled plasma-mass spectrometry (spICP-MS) was performed using time-of-flight (TOF) and multicollector (MC)-based platforms to measure the Pb isotopic composition of individual nanoscale particles. Distinct Pb isotope ratios were measured in particles from four powdered galena samples of different origins (average single-particle 206Pb/207Pb ratios ranging from 0.91 to 1.28) using both the TOF and the MC-based platforms. Differentiation of galena particles in a mixture (liberated grains and those hosted in a silicate matrix) was possible due to detecting their unique multielemental fingerprints. The differing behavior of the two galena samples during digestion was investigated; undigested galena particles trapped within silicate minerals were detected using spICP-MS, which has implications for Pb recovery in bulk-scale isotopic analysis. The multinuclide detection capability of the ICP-TOF-MS instrument allowed for the simultaneous detection of secondary constituent elements within the nanoparticles and the identification of multiple populations of isotopically distinct Pb-bearing particles in a copper ore sample, whereas the increased sensitivity of the MC instrument enabled quantification of 204Pb, allowing differentiation using multiple isotopic ratios. A single particle isotope ratio analysis module was developed within an open-source spICP-TOF-MS data processing platform, enabling its adoption across chemical disciplines.

Goodman, Aaron J. [University of Montreal, Quebec,↗
DOE OSTI2024

Understanding Trace Iron and Chromium Incorporation During Gibbsite Crystallization and Effects on Mineral Dissolution

Incorporation of pollutants, e.g., heavy metals, or critical elements, e.g., lithium, as impurities in mineral phases can significantly affect their mobility or sequestration in the environment. Even when present at low concentrations, impurities can alter the solubility and reactivity of the host mineral. Here, in this study, we investigate the incorporation of trace amounts of iron (Fe 3+ ) and chromium (Cr 3+ ) during the crystal growth of the aluminum (Al 3+ ) hydroxide, gibbsite, a major component of bauxite ores, an important soil mineral, and a dominant mineral phase in stored radioactive wastes. Using a comprehensive suite of analytical techniques, we show that both Cr 3+ and Fe 3+ can be incorporated into the gibbsite lattice during coprecipitation by replacing Al 3+ in octahedral sites. These small amounts are consistent with limited to no structural isomorphism shared between Al 3+ and Cr 3+ /Fe 3+ hydroxide precipitates, nor room temperature miscibility of their isostructural M 2 O 3 oxide forms, in contrast with oxyhydroxide forms where Al 3+ and Fe 3+ share similar structural topologies. Despite the limited uptake of Cr 3+ /Fe 3+ , we show that these impurities have significant implications for gibbsite dissolution behavior. The limited uptake of Cr 3+ /Fe 3+ (e.g. 0.43% Cr 3+ and 0.4% Fe 3+ ), we show that these impurities have significant implications for gibbsite dissolution behavior and subsequent reactivity in complex environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nanoscale Mg-Depleted Layers Slow Carbonation of Forsterite (Mg 2 SiO 4 ) When Water Is Limited

Passivation of silicate surfaces by accumulated reaction products is an obstacle to efficient CO 2 mineralization. In this study, we investigate a unique passivation effect during the carbonation of the basalt mineral forsterite (Mg 2 SiO 4 ) in humid supercritical CO 2 (50 °C, 90 bar). Using in situ high-pressure infrared spectroscopy, we demonstrate that dissolution of forsterite into a thin water film slows significantly after reaction for ˜24 h, even under far-from-equilibrium conditions. Further, 29 Si magic angle spinning nuclear magnetic resonance spectroscopy detects a highly polymerized amorphous silica at this stage. On the basis of transmission electron microscopy and energy dispersive X-ray spectroscopy, we show that the silica is present as a Mg-depleted layer that is just 2–3 nm thick on the reacted forsterite particles. The decrease in the level of forsterite dissolution in the presence of an extraordinarily thin Mg-depleted layer can be strongly linked to properties of the thin fluid film at the surface, highlighting the importance of water during mineral carbonation. This study furthers our understanding of silicate mineral carbonation under select low-water, humidified fluid conditions relevant to basaltic geologic reservoirs, recovery of critical elements by carbonation of mafic ores, and sequestration of atmospheric CO 2 by enhanced rock weathering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Mechanisms of Al3+ dimerization in alkaline solutions

The molecular speciation of aluminum (Al3+) in alkaline solutions is fundamental to its precipitation chemistry within a number of industrial applications that include ore renement and industrial processing of Al wastes. Under these conditions, Al3+ is predominantly Al(OH) {4 , while at high [Al] dimeric species also known to form. To date, the mechanism of dimer formation remains unclear and it is likely infuenced by complex ion ion interactions. In the present work, we investigate the role of ion pairing and a suite of potential dimerization pathways using a three-pronged approach that consists of density functional theory-based molecular dynamics (DFTMD), static DFT calculations (sDFT) and semi-empirical density functional tight binding molecular dynamics (SEMD). Specic cation eects imparted by the background electrolyte cations Na+, Li+ and K+ have been examined. Our simulations predict that when the Al species are ion paired with either cation the formation of the oxo-bridged Al2O(OH) 2{6 is favored with respect to the dihydroxo-bridged Al2(OH) 2{8 , in agreement with previousspectroscopic work. The formation of both dimers rst proceeds by bridging of two monomeric units via one hydroxo ligand, leading to a labile Al2(OH) 2{8 isomer. The eect of contact ion pairing of Li+ and K+ on the dimerization energetics is distinctly more favorable than that of Na+, which may have an impact on further ligomerization.

Pouvreau, Maxime↗
DOE OSTI2021

Progress in Uranium Chemistry: Driving Advances in Front-End Nuclear Fuel Cycle Forensics

The front-end of the nuclear fuel cycle encompasses several chemical and physical processes used to acquire and prepare uranium for use in a nuclear reactor. These same processes can also be used for weapons or nefarious purposes, necessitating the need for technical means to help detect, investigate, and prevent the nefarious use of nuclear material and nuclear fuel cycle technology. Over the past decade, a significant research effort has investigated uranium compounds associated with the front-end of the nuclear fuel cycle, including uranium ore concentrates (UOCs), UF 4 , UF 6 , and UO 2 F 2 . These efforts have furthered uranium chemistry with an aim to expand and improve the field of nuclear forensics. Focus has been given to the morphology of various uranium compounds, trace elemental and chemical impurities in process samples of uranium compounds, the degradation of uranium compounds, particularly under environmental conditions, and the development of improved or new techniques for analysis of uranium compounds. Overall, this research effort has identified relevant chemical and physical characteristics of uranium compounds that can be used to help discern the origin, process history, and postproduction history for a sample of uranium material. This effort has also identified analytical techniques that could be brought to bear for nuclear forensics purposes. Continued research into these uranium compounds should yield additional relevant chemical and physical characteristics and analytical approaches to further advance front-end nuclear fuel cycle forensics capabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multiplicity of Th(IV) and U(VI) HEH[EHP] Chelates at Low Temperatures from Concentrated Nitric Acid Extractions

Organophosphorus extractants have been widely investigated for lanthanide recovery from ore and for application in the reprocessing of spent nuclear fuel, such as in Advanced TALSPEAK schemes. Determining the speciation of the extracted metal complex in the organic phase remains a significant challenge. A better understanding of the variability of HEH[EHP]–actinide complexes and the speciation of chelates for tetra- and hexavalent actinides can improve the predictability of actinide phase transfer in such biphasic systems. Here, the extraction of Th(IV) and U(VI) from nitric acid media using HEH[EHP] in heptane is examined. The distribution ratio as a function of nitric acid concentration was quantified using UV–vis spectroscopy, and then the speciation of HEH[EHP]–metal complexes in the organic phase was investigated using Fourier transform infrared (FTIR) spectroscopy and low-temperature 31 P nuclear magnetic resonance (NMR) spectroscopy. In addition to perturbation of the vibrational modes proximal to the phosphonic moiety in HEH[EHP] in the FTIR spectra, the appearance of a nitrate signal was found in the organic phase following extraction from the highest acidity conditions for U(VI). The 31 P NMR spectra of the organic phase at a low temperature (-70 °C) exhibited a surprising number (n) of resonances (n ≥ 7 for Th(IV) and n ≥ 11 for U(VI)), with the distribution between these resonances changing with the initial concentration of nitric acid in the aqueous phase. These results indicate that the compositions of the inner and outer spheres of the extracted actinides in the organic phase are more diverse than initially thought.

31P NMR↗
DOE OSTI2025

QM Investigation of Rare Earth Ion Interactions with First Hydration Shell Waters and Protein-Based Coordination Models

Here, conventional methods for extracting rare earth metals (REMs) from mined mineral ores are inefficient, expensive, and environmentally damaging. Recent discovery of lanmodulin (LanM), a protein that coordinates REMs with high-affinity and selectivity over competing ions, provides inspiration for new REM refinement methods. Here, we used quantum mechanical (QM) methods to investigate trivalent lanthanide cation (Ln 3+ ) interactions with coordination systems representing bulk solvent water and protein binding sites. Energy decomposition analysis (EDA) showed differences in the energetic components of Ln 3+ interaction with representatives of solvent (water, H 2 O) and protein binding sites (acetate, CH 3 COO – ), highlighting the importance of accurate description of electrostatics and polarization in computational modeling of REM interactions with biological and bioinspired molecules. Relative binding free energies were obtained for Ln 3+ with coordination complexes originating from binding sites in PDB structures of a lanthanum binding peptide (PDB entry 7CCO) and LanM, with explicit consideration of the first hydration shell waters, according to quasi-chemical theory (QCT). Beyond the first shell, the bulk solvent environment was represented with an implicit continuum model. Ln 3+ interactions with (H 2 O) 9 and both binding site models became more favorable, moving down the periodic series. This trend was more pronounced with the protein binding site models than with water, resulting in affinity increasing with periodic number, except for the last REM, Lu 3+ , which bound less favorably than the preceding element, Yb 3+ . Using the truncated 7CCO binding site model, the magnitude and trend of the experimental Ln 3+ relative binding free energies for the whole 7CCO peptide were reproduced. Conversely, the previously reported experimental data for LanM show a preference for the earlier lanthanides; this is likely due to longer-range interactions and cooperative effects, which are not represented by the reduced models. Using the truncated 7CCO binding site model, the magnitude and trend of the experimental Ln 3+ relative binding free energies for the whole 7CCO peptide were reproduced. In contrast to the previously reported experimental data for LanM, the peptide preferentially binds the earlier lanthanides. This difference likely arises due to longer-range interactions and cooperative effects not represented by the peptide. Further investigation of Ln 3+ interactions with whole proteins using polarizable molecular mechanics models with explicit solvent is warranted to understand the influence of longer-ranged interactions, cooperativity, and bulk solvent. Nevertheless, the present work provides new insights into Ln 3+ interactions with biomolecules and presents an effective computational platform for designing specific single-site REM binding peptides more efficiently.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Characterization of Lanthanum Monazite Surface Chemistry and Crystal Morphology through Density Functional Theory and Experimental Approaches

Monazite is a rare earth element (REE)-containing mineral that consists of (REE)PO 4 formal units and is one of the most important sources of these critical materials. The concentration of REEs from mined monazite ore often involves froth flotation, which is a beneficiation process that enhances the efficiency of downstream processing. The effectiveness of froth flotation is largely governed by the ability of collector agents to selectively bind to monazite particles. Thus, a molecular-level understanding of monazite interfacial chemistry is integral to the design of effective collector agents. To address this need, we performed density functional theory (DFT) calculations and a variety of experimental techniques to characterize La-monazite and elucidate its crystal morphology. Interestingly, we find minimal differences in the predicted morphologies of La-monazite for hydrous and anhydrous environments, which are largely dominated by low-index facets (e.g., {110}, {100}, and {010}). Indexing of synthesized La-monazite crystals via X-ray diffraction also uncovers {110} and {100} as the predominant facets. The average surface energies of 0% and 100% water coverage La-monazite crystals were predicted to be 0.87 and 0.76 J/m 2 , respectively, while calorimetry suggests values of 1.30 and 1.15 J/m 2 , respectively. The apparent discrepancies between the theoretical and experimental values are expected and attributed to defects present in physical crystals, in contrast to the perfect mineral surfaces in simulations. The difference in surface energy between the 0% and 100% water coverage morphologies predicted by theory is consistent with the value measured via calorimetry. DFT reveals a wide range of adsorption energies for water across the studied facets, but in all cases, water is predicted to strongly bind to monazite surfaces with an average adsorption energy of -92.7 kJ/mol for a La-monazite single crystal. Finally, this study provides the groundwork necessary for the rational design of froth flotation collector agents by granting molecular-level insight into the predominant facets of monazite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Carbonation and Sulfidation of Mg- and Ni-Containing Solutions: Implications for Carbon Mineralization and Critical Element Recovery

Carbonation of alkaline earth metals ( e.g. , magnesium (Mg)) and sulfidation of nickel (Ni) are promising methods to achieve concurrent carbon mineralization and selective Ni recovery. However, the coexistence of alkaline earth metals and Ni from silicate ores or mining wastewater complicates the carbonation and sulfidation owing to cation coprecipitation. To better understand simultaneous metal carbonation and Ni-sulfide formation, we used Mg- and Ni-containing solutions and systematically investigated the Mg and Ni coprecipitates’ phase transformation during sequential/concurrent carbonation and sulfidation. During a single carbonation process, hydromagnesite dehydrated and formed magnesite over time. Nickel bicarbonate formed and became a Mg–Ni carbonate solid solution because of their similar ionic radii. During a single sulfidation process, the pH did not affect Ni-sulfide formation, but it controlled Mg behavior. Specifically, at pH 9.6, brucite formed, while at pH 7.8, Mg 2+ remained in the solution. For the sequential carbonation–sulfidation process, Ni-carbonate formed during carbonation converted to Ni-sulfide because of the low Ni-sulfide K sp . For the sulfidation–carbonation process, Ni-sulfide remained the same even after carbonation and Mg-carbonate precipitates. For the concurrent carbonation and sulfidation process, Mg-carbonate and Ni-sulfide formed simultaneously. Finally, this study develops a scientific foundation of carbonation and sulfidation processes, benefiting coupled CO 2 storage and sulfide-enabled resource recovery.

54 ENVIRONMENTAL SCIENCES↗