Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NANOPARTICLES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Modulating the Contact Angle between Nonpolar Polymers and SiO 2 Nanoparticles

Polymer–nanoparticle interactions play an important role in determining the morphology and properties of polymer nanocomposites and controlling the polymeric reactions involving heterogeneous catalysts. Here, in this study, we modulate the interactions between nonpolar polymers and nanoparticles by modifying the nanoparticle surface chemistry and quantify the interaction strength through direct contact angle measurements. We investigate the interactions of three nonpolar polymers, polystyrene, polyethylene, and polycyclooctene, with silica nanoparticles whose surface chemistry has been modified by atomic layer deposition of titania and calcium carbonate and by alkyl silanization. Significant differences in polymer–nanoparticle interactions are observed, which can be attributed to differences in the polarizability of the polymers and oxide surface composition. Compared to fully hydrogenated polycyclooctene, polycyclooctene is shown to have stronger interactions with most metal oxides; however, this trend is reversed following alkyl silanization of the silica nanoparticles, which makes the surface of the particles less polar. These differences in interactions can be leveraged to make polymer nanocomposites with unique properties and enable the selective conversion of polymers without the need for separations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Diels–Alder Augmented Epoxies with Plasmonic Nanoparticle Fillers for Efficient Photothermal Depolymerization

Thermally reversible epoxies through the Diels–Alder (DA) reaction have been used for applications such as recycling, self-healing, and 3D printing. Depolymerization by bulk heating, however, would be a slow and inefficient process due to its low thermal conductivity. In this paper, photothermal conversion using refractory plasmonic titanium nitride (TiN) nanoparticles was employed for efficient and rapid depolymerization of reversible epoxies. TiN nanoparticles have superior thermal stability, broader light absorption, and higher light-to-heat conversion efficiency. They are also less expensive than more common plasmonic gold nanoparticles. Photothermal behavior of TiN nanoparticle-filled reversible epoxies was investigated as a function of concentration of TiN nanoparticles and as a function of the intensity of a light source. TiN nanoparticles could induce sufficient heat for depolymerization with a trace content, 0.01% by weight, under a broad-spectrum white light of intensity 1760 mW/cm 2 instead of a strong light source such as a laser. The reversible epoxies were prepared by a reaction between furan precursors and a bismaleimide compound. Crosslinking density was controlled by altering the architecture of furan precursors and the feed ratio between the furan precursor and the bismaleimide compound. These changes in chemical structure and degree of crosslinking permit the control of the thermomechanical properties of the reversible epoxy from soft elastomers to hard elastomers. Here, the reversible epoxies display a flow region at around 110 °C. Depolymerization through the retro-DA was confirmed by Fourier transform infrared spectroscopy as a function of duration at a high temperature. Light-induced removability and recyclability were demonstrated by adhesion tests using the reversible epoxy/nanoparticle composites.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Multivariate Bayesian Optimization of CoO Nanoparticles for CO 2 Hydrogenation Catalysis

The hydrogenation of CO 2 holds promise for transforming the production of renewable fuels and chemicals. However, the challenge lies in developing robust and selective catalysts for this process. Transition metal oxide catalysts, particularly cobalt oxide, have shown potential for CO 2 hydrogenation, with performance heavily reliant on crystal phase and morphology. Achieving precise control over these catalyst attributes through colloidal nanoparticle synthesis could pave the way for catalyst and process advancement. Yet, navigating the complexities of colloidal nanoparticle syntheses, governed by numerous input variables, poses a significant challenge in systematically controlling resultant catalyst features. We present a multivariate Bayesian optimization, coupled with a data-driven classifier, to map the synthetic design space for colloidal CoO nanoparticles and simultaneously optimize them for multiple catalytically relevant features within a target crystalline phase. The optimized experimental conditions yielded small, phase-pure rock salt CoO nanoparticles of uniform size and shape. These optimized nanoparticles were then supported on SiO 2 and assessed for thermocatalytic CO 2 hydrogenation against larger, polydisperse CoO nanoparticles on SiO 2 and a conventionally prepared catalyst. The optimized CoO/SiO 2 catalyst consistently exhibited higher activity and CH 4 selectivity (ca. 98%) across various pretreatment reduction temperatures as compared to the other catalysts. This remarkable performance was attributed to particle stability and consistent H* surface coverage, even after undergoing the highest temperature reduction, achieving a more stable catalytic species that resists sintering and carbon occlusion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Three-Component Strategy for Synthesizing High-Entropy Alloy Nanoparticles with High-Index Facets

Controlling the shapes and, more importantly, exposed facets (high-index facets (HIFs), especially) of high-entropy alloy (HEA) nanoparticles is not yet possible. Herein, a three-component synthetic strategy for obtaining tetrahexahedral (THH)-shaped HIF-HEA nanoparticles through a combined alloying-dealloying strategy and liquid-metal mediation process is reported. Metal precursors are first alloyed with Ga to form multielemental nanoparticles and then alloyed with a volatile metal. Selectively dealloying the volatile metal from the nanoparticles is used to regulate their surface energies; the Ga stabilizes the HEA phase, and the trace element stabilizes the HIFs, resulting in THH-shaped HEA nanoparticles (seven different types) with {210} HIFs. Finally, nanoparticle megalibraries containing millions of THH-shaped HIF-HEAs on 4 cm 2 chips with size and composition control shows generalizability and scalability for materials discovery purposes.

alloys↗
DOE OSTI2021

Development of Bismuth and Platinum Bi-Metallic Nanoparticles to Enhance Melt Wire Temperature Resolution

Advanced manufacturing (AM) based on direct-write (DW) technologies has emerged as the predominant enabler for the fabrication of active and passive sensors to be deployed in harsh operating environments seen in a nuclear reactor. Recently, Idaho National Laboratory and Boise State University have recently established capabilities to incorporate advanced manufacturing (AM) methods to accelerate, modernize and enhance functionality of nuclear sensors and instrumentation to achieve the goal of enhancing the safety and efficiency of nuclear reactors. A significant thrust of this work includes the development of nuclear relevant feedstock materials compatible with a variety of direct-write processes for the development, fabrication and testing of AM sensors for peak temperature detection and neutron flux monitoring. For this report, bismuth and bismuth/platinum (BiPt) bi-metallic nanoparticles were synthesized using wet chemical approaches to develop bi-metallic feedstock materials to enhance the sensitivity of melt wires for peak temperature detection. Nanoparticle characterization was performed with Transmission Electron Microscopy (TEM) for nanoparticle composition and size, Transmission X-Ray Diffraction Fluorescence (TXRF) for nanoparticle composition, and Differential Scanning Calorimetry to elucidate the melting point of BiPt bi-metallic nanoparticles. Preliminary results indicate bi-metallic BiPt nanoparticles as a viable pathway for fabricating high resolution AM melt wires.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Controlling melt flow by nanoparticles to eliminate surface wave induced surface fluctuation

The high surface roughness is one of the major challenges encountered in laser metal additive manufacturing (AM) processes, which is closely related to the melt flow behavior. However, how to control the melt flow in laser metal AM processes to improve surface finish is unknown. Here we reveal the effects of nanoparticles on melt flow behavior at every location of melt pool during laser metal AM process for the first time using Al6061 + TiC nanoparticles system and achieve significant improvement of surface finish by using TiC nanoparticles to control the melt flow and damp the surface wave. Based on the in-situ x-ray imaging observation, the surface wave is fully damped after adding TiC nanoparticles, compared with only 56% damping without nanoparticles during LPBF of Al6061. Our in-depth in-situ x-ray imaging analysis and viscosity measurement enable us to identify that nanoparticle-induced increase of viscosity causes the fully damping of the surface wave by (1) increasing the internal fluid friction for more efficient wave amplitude reduction, (2) controlling the melt flow to increase the surface wave number, (3) controlling the melt flow to increase the wave damping time. Furthermore, we also quantified the relative contributions of increasing fluid friction, increasing wave number, and increasing damping time to wave damping, which account for 61%, 25%, and 14%, respectively. Furthermore, our research provides the mechanisms and potential method to address the surface finish challenge in laser metal AM processes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Controlled 3D nanoparticle deposition by drying of colloidal suspension in designed thin micro-porous architectures

Nanoparticle deposition by drying of colloidal suspension in thin micro-porous architectures has attracted a lot of attention in scientific research as well as industrial applications. However, the underlying mechanisms of such three-dimensional (3D) deposition are not yet fully revealed due to the complexity of the co-occurring processes of two-phase fluid flows, phase change and mass transport. Consequently, the control of 3D nanoparticle deposition remains a challenge. We use a combined experimental and numerical approach to achieve controlled 3D nanoparticle deposition by drying of colloidal suspension in two pillar-based thin micro-porous architectures. By the design of pillar layout, rectangular-spiral and circular-spiral deposition configurations are obtained globally. By varying the surface wettability, vertically symmetric and sloped nanoparticle depositions can be achieved locally. While the numerical modeling reveals the mechanisms of liquid internal flow, as well as the impact of local drying rate on nanoparticle transport, accumulation and final deposition, the experimental results of deposition configurations validate the controlling strategies. This combined experimental and numerical work provides a framework to achieve desired 3D nanoparticle deposition in thin micro-porous architectures, with a thorough understanding of the underlying mechanisms of two-phase fluid flows, phase change and mass transport.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Conversion of CO 2 from power plant into CaCO 3 nanoparticles

Carbon dioxide (CO 2 ), a main composition of flue gas, represents a significant and largely untapped carbon resource. Herein, mediated by glycine (Gly), we captured and converted CO 2 into CaCO 3 nanoparticles using real flue gas from a power plant, demonstrating for the first time the feasibility of using amino acid to convert CO 2 from power plant flue gasses. The method did not require extraneous energy and CaCO 3 nanoparticles with a size of ∼25 nm were obtained. Moreover, the potential toxicity of CO 2 -converted nanoparticles was investigated. It appeared that both the initial CO 2 loading and the carbamate percentage significantly influence the shape and size of the CaCO 3 particles. Our method was also proven effective for flue gas with varying CO 2 concentrations (4 %, 12 %, and 20 %). By tuning flue gas bubbling time and flow rate to achieve consistent CO 2 loading and carbamate levels, we produced CaCO 3 nanoparticles with similar shapes and sizes across all CO 2 concentrations studied. In addition, our data indicated that although real flue gas contains small amounts of gases like oxygen and CO, they insignificantly influence the shape and size of our nanoparticles but did impact the phase component of CaCO 3 . In conclusion, the toxicity experiments found that CaCO 3 nanoparticles produced from both real flue gas and simulated flue gas exhibited concentration- and time-dependent effects on cell viability.

36 MATERIALS SCIENCE↗
DOE OSTI2021

New concept of radiolytic synthesis of gold nanoparticles in continuous flow

Radiolytic synthesis has been used to produce a plethora of unsupported and supported metallic nanoparticles in batch. As proof of a new concept, we evaluated the formation of gold nanoparticles by radiolytic synthesis in continuous flow using a millifluidic reactor. A mixture of gold ions solution, branched polyethyleneimine, and ethylene glycol yielded gold nanoparticles with a mean size of 3.4 ± 1.0 nm after irradiation with an X-ray irradiator (127 Gy/min) at an absorbed dose of 5.1 kGy. The morphology and size distribution of gold nanoparticles was influenced by AgNO 3 , where its absence resulted in a mean size of 20.9 ± 15.8 nm. The radiolytic synthesis of gold nanoparticles in continuous flow was achieved in short reaction times (<60 min), at room temperature, and with low concentrations of both stabilizing and reducing agents. Furthermore, these results demonstrate the potential of radiolytic synthesis in continuous flow for high-throughput formation of metallic nanoparticles with controlled specifications in size and distribution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Online detection of airborne nanoparticle composition with mass spectrometry: Recent advances, challenges, and opportunities

Airborne nanoparticles are receiving growing attention due to their impacts on human health, air quality, and climate. Additionally, there are increasing applications of aerosol-based nanotechnology. Real-time measurement of airborne nanoparticle composition is challenging due to their small masses and the difficulties in effectively separating them from larger particles. Custom-built instruments based on mass spectrometry have been developed for nanoparticle composition, including thermal desorption-based, laser-based, and solution-based techniques. They have significantly promoted the understanding of airborne nanoparticles in the last two decades. However, they are affected by molecular fragmentation, lack of mass-resolving power, incomplete species detection, and difficulties in directly comparing to gas-phase measurements. Recent developments in atmospheric mass spectrometry provide possible solutions. Here, this review presents the potential application of these new advances to real-time measurements of the molecular nanoparticle composition and discusses the associated challenges. Such measurements present opportunities for a more comprehensive view of airborne nanoparticles and their impacts.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Precursor Identity and Surfactant Concentration Influence Shape of UO 2 Nanoparticles

A fundamental step toward studying the unique properties of actinide nanomaterials is control over the shape of actinide nanoparticles. Toward this goal, this work demonstrates the effects of precursor identity and surfactant concentration on the shape of uranium dioxide (UO 2 ) nanoparticles. UO 2 nanoparticles were synthesized by thermal decomposition of different precursors in the presence of oleylamine and oleic acid as surfactants. The size, shape, phase, and chemical composition of the nanoparticles was evaluated using transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), electron diffraction (ED), and U L 3 -edge X-ray absorption fine-structure (XAFS) spectroscopy. Anisotropic UO 2 nanocubes of ∼ 4 nm were obtained only with low surfactant concentrations, while increasing the surfactant concentration resulted in formation of nanoparticles with an isotropic, sphere morphology. The importance of precursor identity was also investigated by employing U(hfa) 4 , U(acac) 4 , UO 2 (acac) 2 , and UO 2 (hfa) 2 ·H 2 O (where hfa = hexafluoracetylacetone and acac = acetylacetone) as precursors. The nanocube morphology was only observed when U(hfa) 4 was used as a precursor. XAS allowed for comparison of the disorder in anisotropic vs isotropic UO 2 nanoparticles.

Nanocubes↗
DOE OSTI2021

Discovery of Gold Nanoparticles in Marcellus Shale

A high density of gold (Au) nanoparticles has been observed on the surfaces of the coexisting opal nanospheres in kerogen-bearing shales from the Marcellus Formation. Our analyses of the Au nanoparticles and associated minerals indicate that this represents a new formation type of colloidal gold nanoparticles. Additionally, the opal nanospheres are a new kind of natural opal-A that is characteristic of the mesoporous texture formed through oil-in-water emulsion processes. High-resolution transmission electron microscopy (TEM) combined with energy-dispersive X-ray spectroscopy analysis directly reveals spherical gold nanoparticles and gold nanorods associated with mesoporous opal nanospheres. Our newly found textures indicate that opal nanospheres may have facilitated the co-precipitation of pure gold nanoparticles in organic-bearing, reduced environments. Furthermore, our TEM observations provide distinct images of the initial phase of colloidal gold and silica, which may contribute to the formation of Au deposits involving "invisible" gold, secondary supergene enrichments, or high-grade gold accumulations. Finally, the discovery of Au nanoparticles in hydrocarbon-rich shale formations such as Marcellus (which contains 0.6-4.1 wt % gold/opal) suggests a potential for co-production of both gas/oil and gold-two valuable commodities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Spatial Composition Influenced by Solvent in High-Entropy Alloy Nanoparticle Synthesis via Polyol Reduction

The performance of nanoparticles in catalytic reactions depends critically on their surface composition. In a multielemental system, this issue becomes even more important. Here, we report that the choice of solvent in polyol reduction synthesis of high entropy alloy (HEA) nanoparticles can have a subtle but significant influence on the elemental distribution near the surface of individual nanoparticles. Our study reveals that longchain polyethylene glycol typically produces a more uniform multielement distribution within a nanoparticle than short-chain triethylene glycol under identical experimental conditions. We performed electrochemical reduction of metal salts in both solvents to understand the reduction kinetics of metal salts, which shows that a solvent capable of improving the co-reduction of metal salts leads to the synthesis of more homogenized nanoparticles, whereas a solvent with a varying degree of reduction potency will lead to inhomogeneous elemental distribution in an HEA nanoparticle.

Catalyst↗
DOE OSTI2022

Platinum nanoparticle compression: Combining in situ TEM and atomistic modeling

The mechanical behavior of nanoparticles governs their performance and stability in many applications. However, the small sizes of technologically relevant nanoparticles, with diameters in the range of 10 nm or less, significantly complicate experimental examination. These small nanoparticles are difficult to manipulate onto commercial test platforms and deform at loads that are below the typical noise floor of the testing instruments. Here, we synthesized small platinum nanoparticles directly onto a mechanical tester and used a modified nanomanipulator to enhance load resolution to the nanonewton scale. We demonstrated the in situ compression of an 11.5-nm platinum nanoparticle with simultaneous high-resolution measurements of load and particle morphology. Molecular dynamics simulations were performed on similarly sized particles to achieve complementary measurements of load and morphology, along with atomic resolution of dislocations. The experimental and simulation results revealed comparable values for the critical resolved shear stress for failure, 1.28 and 1.15 GPa, respectively. Altogether, this investigation demonstrated the promise of, and some initial results from, the combination of atomistic simulations and in situ experiments with an unprecedented combination of high spatial resolution and high load resolution to understand the behavior of metal nanoparticles under compression.

42 ENGINEERING↗
DOE OSTI2024

Uncovering the three-dimensional structure of upconverting core–shell nanoparticles with multislice electron ptychography

In photon upconverting core–shell nanoparticles, structure strongly dictates performance. Typical imaging in scanning transmission electron microscopy has sufficient resolution to probe the atomic structure of these nanoparticles, but contrast, dose, and projection limitations make conventional methods insufficient for fully characterizing these structures. Phase retrieval techniques provide a promising alternative imaging mode, and, in particular, multislice electron ptychography can recover depth-dependent information. Here, we study beam-sensitive photon upconverting core–shell nanoparticles with a multislice ptychography approach using a low electron dose to avoid damage. Large strain fields arise in these heterostructures due to the mismatch in lattice parameter between the core and the shell. We reconstruct both a nanoparticle that appears defect-free and one that has a large break in the side and map the distribution of strain in 3D by computing distortion fields from high-resolution potential images of each slice. In the defect-free nanoparticle, we observe twisting of the shell, while in the broken nanoparticle, we measure the 3D position of the crack, the core, and dislocations. These results highlight the advantage of multislice electron ptychography to recover 3D information from a single scan, even under strict electron dose requirements from beam-sensitive samples.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Charge regulation effects on colloidal mixture nanoparticles

Changes in pH within a system containing dissociable sites affect the protonation and deprotonation of these groups, thereby influencing their physical properties. In response, the system modifies their surface charge, affecting electrostatic interactions, aggregation, stability, and structural behavior. Although the pH can be tuned in experiments, it is difficult to model this phenomenon using simulations or theoretical approaches. Here, we perform hybrid Monte Carlo-molecular dynamics simulations to model charge regulation effects in an equimolar colloidal charged system. We compare charge regulation effects with those of a system in which the charges of colloidal nanoparticles are not dissociable. The comparison between the two cases modifies the phase diagram, and it changes the volume fraction where a percolation network of nanoparticles is found. Charge regulation is found to destroy network formation, as the charge in the nanoparticles is modified because of the cooperativity dependency of the degree of charge dissociation sites among the nanoparticles favoring cluster formation. Furthermore, our work suggests that the ionic and/or electronic conductivity in functionalized nanoparticles can be modified by changing pH values. It also guides the experimental design of oppositely charged nanoparticles as inks for 3D printing processes.

Classical statistical mechanics↗
DOE OSTI2020

Synthesis of TiO{sub 2} nanoparticles decorated with gold nanoclusters using pulsed laser ablation in liquid

Amorphous spherical titanium dioxide (TiO{sub 2}) nanoparticles, decorated gold nanoparticles, are shown to be formed under irradiation of commercial TiO{sub 2} nanopowders dispersed in aqueous solution of hydrogen tetrachloroaurate (HAuCl{sub 4}) by second-harmonic nanosecond pulses of an Nd : YAG laser. It is found that these hybrid nanostructures are formed during laser-induced remelting of the initial nanoparticles, stimulated by gold nanoclusters (providing more efficient absorption of visible laser radiation by titanium dioxide) recovered on their surface. The morphology and chemical composition of the newly formed hybrid nanomaterials are investigated in detail by electron microscopy, Raman spectroscopy, and energy-dispersive analysis. It is shown that the average size and number of gold nanoparticles recovered on the TiO{sub 2} surface can be controlled by varying the concentration ratio of the initial nanomaterial and HAuCl{sub 4}. A spectroscopic analysis of light scattering by single hybrid nanoparticles and the results of numerical calculation of the structure of electromagnetic fields near their surface indicate good prospects of these hybrid nanomaterials for various applications in modern optics, optoelectronics, and nanophotonics; for example, for designing chemo- and biosensor platforms and new-generation solar cells. (nanoparticles)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Studies of laser stimulated photodetachment from nanoparticles for particle charge measurements

Determining nanoparticle charge is more challenging than that for microparticles due to change in the particle size during the synthesis substantial plasma property variations, and difficulties in visualizing individual particles, rendering conventional microparticle charge diagnostics ineffective in dusty plasma. In this work, we utilized laser-stimulated photodetachment (LSPD) to deduce the mean charge of nanoparticles. Nanoparticles were grown in an Ar/C 2 H 2 mixture using a capacitively coupled RF discharge and the LSPD induced changes in the electron current monitored by a cylindrical Langmuir probe. LSPD signals were obtained and analyzed across different dust growth phases. The prolonged decay of electron current pulses was attributed to the presence of residual negative ions, caused by the effective electrostatic trapping of these ions and the potential post—LSPD re-formation of new ones. The particle charge was estimated by combining the laser-stimulated photodetachment signal from the probe with the dust density obtained from laser-light extinction using the measured nanoparticle size distribution. For a nanoparticles size range of approximately 100–250 nm and mean diameter of $d$ p ∼154.37 nm, the effective mean charge was estimated to be $\langle$$Q$$\rangle$ d $≈$ 37 elementary charge units. The measured charge values are lower than those predicted by orbital motion limited theory, which may be attributed to significant electron depletion in the nanodusty plasma. LSPD results in Ar/C 2 H 2 nano-dusty plasma confirm the applicability of this method for estimating individual nanoparticle charges. However, it has also been demonstrated that electron detachment from residual background negative ions can influence the detachment current decay and must be carefully considered.

dust particle charge↗