Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multiple Filters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Analysis and application of minimum variance discrete linear system identification

An on-line minimum variance (MV) parameter identifier is developed which embodies both accuracy and computational efficiency. The formulation results in a linear estimation problem with both additive and multiplicative noise (AMN). The resulting filter which utilizes both the covariance of the parameter vector itself and the covariance of the error in identification is proven to be mean-square convergent and mean-square consistent. The MV parameter identification scheme is then used to construct a stable state and parameter estimation algorithm.

Kotob, S.↗
NASA NTRS1986

Remote detection of OH

This is a remote measurement technique utilizing a XeCl excimer laser tuned to the Q sub 21 1 rotational transition of the 0-0, A-X band at 307.847 nm. A wavemeter is under development to monitor, on a pulse-to-pulse basis, both the laser lineshape and absolute wavelength. Fluorescence is detected with a multiple Fabry-Perot type filter with a spectral resolution on the order of 0.001 nm. This is tuned to the overlapping Q sub 2 2, Q sub 12 2, Q sub 2 3, and Q sub 12 3 rotational transitions at 308.986 nm. The fringe pattern from this filter is imaged using a discrete, multi-anode detector which has a photon gain of 10 to the 8th power. This permits the simultaneous monitoring of OH fluorescence, N2 and/or O2 rotational Raman scattering and broadband background levels. The use of three etalons in series provides sufficient rejection, approx. greater than 10 to the 10th power, against the laser radiation only 1.2 nm away.

Mcdermid, I. Stuart↗
NASA NTRS1990

Millimeter-wave monolithic diode-grid frequency multiplier

A semiconductor diode structure useful for harmonic generation of millimeter or submillimeter wave radiation from a fundamental input wave is fabricated on a GaAs substrate. A heavily doped layer of n(sup ++) GaAs is produced on the substrate and then a layer of intrinsic GaAs on said heavily doped layer on top of which a sheet of heavy doping (++) is produced. A thin layer of intrinsic GaAs grown over the sheet is capped with two metal contacts separated by a gap to produce two diodes connected back to back through the n(sup ++) layer for multiplication of frequency by an odd multiple. If only one metal contact caps the thin layer of intrinsic GaAs, the second diode contact is produced to connect to the n(sup ++) layer for multiplication of frequency by an even number. The odd or even frequency multiple is selected by a filter. A phased array of diodes in a grid will increase the power of the higher frequency generated.

Maserjian, Joseph↗
NASA NTRS1991

A 640-MHz 32-megachannel real-time polyphase-FFT spectrum analyzer

A polyphase fast Fourier transform (FFT) spectrum analyzer being designed for NASA's Search for Extraterrestrial Intelligence (SETI) Sky Survey at the Jet Propulsion Laboratory is described. By replacing the time domain multiplicative window preprocessing with polyphase filter processing, much of the processing loss of windowed FFTs can be eliminated. Polyphase coefficient memory costs are minimized by effective use of run length compression. Finite word length effects are analyzed, producing a balanced system with 8 bit inputs, 16 bit fixed point polyphase arithmetic, and 24 bit fixed point FFT arithmetic. Fixed point renormalization midway through the computation is seen to be naturally accommodated by the matrix FFT algorithm proposed. Simulation results validate the finite word length arithmetic analysis and the renormalization technique.

Zimmerman, G. A.↗
NASA NTRS1992

Development of an on-line parameter estimation system using the discrete modal filter

Ongoing development of an automated system for monitoring the frequency and damping of time varying structural systems is discussed. A spatial filtering technique called the discrete modal filter is used to uncouple multiple response measurements into modal coordinate responses. Since the modal coordinate responses are the responses of single-degree-of-freedom systems, the frequency and damping may be accurately estimated with short data records. An on-line monitoring system is discussed which may be useful in a variety of applications. The focus in this paper is on the application to aircraft flight flutter testing.

Shelley, S. J.↗
NASA NTRS1991

Photon-assisted resonant tunneling through variably spaced superlattice energy filters

The observation of photon-assisted resonant tunneling in a multiple quantum well structure composed of doped quantum wells separated by variably space superlattice energy filters is reported. Electrons confined in the quantum wells are excited to the second quantized state by intersubband absorption of incident infrared radiation and are subsequently emitted through the filters under appropriate bias conditions. This is manifested by a distinct peak, with an associated negative differential photoconductance, in the photocurrent versus bias voltage characteristic at low temperatures.

Larsson, A.↗
NASA NTRS1985

Beam-driven ion cyclotron harmonic resonances in the terrestrial foreshock

A terrestrial upstream wave event which demonstrates multiple, ion cyclotron harmonic resonances between the interplanetary wave population and an observed proton beam is analyzed. The techniques and parameters employed in the data analysis are discussed, including the use of differential and band-pass filters. An upstream wave event demonstrating multiple harmonic waves is examined, and the instability analysis relevant to the ion beam observations thought to be responsible for that event is discussed. It is shown that an observed bi-Maxwellian ion beam is capable of generating right and left-hand polarized waves through ion cyclotron harmonic resonance.

Smith, C. W.↗
NASA NTRS2011

SDO and RHESSI Observations of Microflares

We present observations of 100 flares (B and A GOES Class) with simultaneous observations in both hard X-ray (HXR) and ultraviolet (UV/EUV) observations by RHESSI and SDO/AIA, respectively. The micro flares were chosen by visually searching for time-isolated events in the available concurrent RHESSI/SDO dataset. Identifying the flare region using RHESSI imaging observations, we compare HXR (thermal and nonthermal) light curves and images with those observed by AlA in every available UV/EUV channels. Many events show complex morphologies with multiple flaring loops observed in AlA images. For the simplest event with a single flare loop, good correlation is found between the hot thermal (approx.10 MK) HXR emission and emission from 131 and 94 Angstrom and the filter-ratio derived temperatures agree with the HXR-derived temperatures during the decay phase. During the impulsive phase, footpoints emission was observed at all wavelengths with filter-ratios suggest the presence of multiple temperatures.

Christe, Steven D.↗
NASA NTRS2022

Layer by layer thin film fabrication with in-process laser patterning

A modification of the traditional layer by layer process where the substrate is irradiated with laser light during the polycation and/or polyanion dipping cycles is described. By adjusting the laser irradiation time during dipping, irradiation power, number of bilayers, and the location and speed of laser irradiation, a variety of structures with controlled thicknesses can be fabricated. Laser patterned multilayer PAH/PTEBS polymer thin films were fabricated and characterized with absorbance mapping to demonstrate several patterning approaches. Results for 1) two laser patterned tracks, 2) single laser patterned track with varied average laser power across the sample from a continuously variable neutral density filter, and 3) laser patterning using a beam sent through multiple circular apertures are described. Based on the variable neutral density filter laser pattern, for 20 bilayer PAH/PTEBS films, an absorbance difference between off and on pattern of 0.1 requires an average laser power of less than 15 mW at 405 nm. The patterns produced are on the scale of several millimeters, though they could be made much smaller by focusing the laser used for patterning.

Nanoengineering↗
NASA NTRS1975

Minimum variance system identification with application to digital adaptive flight control

A new on-line minimum variance filter for the identification of systems with additive and multiplicative noise is described which embodies both accuracy and computational efficiency. The resulting filter is shown to use both the covariance of the parameter vector itself and the covariance of the error in identification. A bias reduction scheme can be used to yield asymptotically unbiased estimates. Experimental results for simulated linearized lateral aircraft motion in a digital closed loop mode are presented, showing the utility of the identification schemes.

Kotob, S.↗
NASA NTRS2019

Photon Sieve Design and Fabrication for Imaging Characteristics Using UAV Flight

The Photon Sieve (PS) team at NASA Langley Research Center (LaRC) began receiving support for the development and characterization of PS devices through the NASA Internal Research & Development Program (IRAD) in 2015. The project involves ascertaining the imaging characteristics of various PS devices. These devices hold the potential to significantly reduce mission costs and improve imaging quality by replacing traditional reflector telescopes. The photon sieve essentially acts as a lens to diffract light to a concentrated point on the focal plane like a Fresnel Zone Plate (FZP). PS’s have the potential to focus light to a very small spot which is not limited by the width of the outermost zone as for the FZP and offers a promising solution for high resolution imaging. In the fields of astronomy, remote sensing, and other applications that require imaging of distant objects both on the ground and in the sky, it is often necessary to perform post-process filtering in order to separate noise signals that arise from multiple scattering events near the collection optic. The PS exhibits a novel filtering technique that rejects the unwanted noise without the need for time consuming post processing of the images. This project leverages key Langley resources to design, manufacture, and characterize a series of photon sieve specimens. After a prototype was developed and characterized in the Langley ISO5 optical cleanroom and laboratory, outside testing was conducted via the capture of images of the moon by using a telescopic setup. This next goal of the project is to design and develop a telescope and image capture system as a drone-based instrument payload. The vehicle utilized for the initial demonstration was a NASA hive model 1200 XE-8 research Unmanned Aerial Vehicle (UAV), capable of handling a 20-pound maximum payload with a 25-minute flight time. This NASA Technical Memorandum (NASA-TM) introduces preliminary results obtained using a PS-based imaging system on the UAV. The next version of the telescope structure will be designed around diffractive optical components and commercially available camera electronics to create a lightweight payload.

Kim, Hyun Jung↗
NASA NTRSDate not supplied

Evaluation of Finite Impulse Response Filters for Turbulence Effects on Sonic Booms

Turbulence effects on sonic booms lead to random variability of sonic boom waveforms measured on the ground, complicating the prediction of such waveforms using sonic boom propagation codes that do not account for turbulence effects. The NASA PCBoom software is one such code shown to accurately predict sonic booms above the atmospheric boundary layer but not those on the ground. Analyses of measured sonic booms show that, on average, the turbulence effects result in sonic boom loudness reduction, on average, that increases with propagation distance and turbulence strength. To efficiently account for such effects, a signal processing-based approach has been developed at NASA using finite impulse response filters derived from predicted waveforms by solving a nonlinear parabolic equation. Analyses indicate that the mean loudness reduction obtained using the filters does not increase with propagation distance or with increasing turbulence strength, in disagreement with flight test data. An alternative approach to the filters is currently under development employing the multiple scattering theory (MST) of wave propagation. Available results from the physics-based MST approach are used to evaluate the predictive capability of the filters, suggesting that the filters can severely underestimate the prediction of the MST approach.

sonic booms↗
NASA NTRSDate not supplied

Evaluation of Finite Impulse Response Filters for Turbulence Effects on Sonic Booms

Turbulence effects on sonic booms lead to random variability of sonic boom waveforms measured on the ground, complicating the prediction of such waveforms using sonic boom propagation codes that do not account for turbulence effects. The NASA PCBoom software is one such code shown to accurately predict sonic booms above the atmospheric boundary layer but not those on the ground. Analyses of measured sonic booms show that, on average, the turbulence effects result in sonic boom loudness reduction, on average, that increases with propagation distance and turbulence strength. To efficiently account for such effects, a signal processing-based approach has been developed at NASA using finite impulse response filters derived from predicted waveforms by solving a nonlinear parabolic equation. Analyses indicate that the mean loudness reduction obtained using the filters does not increase with propagation distance or with increasing turbulence strength, in disagreement with flight test data. An alternative approach to the filters is currently under development employing the multiple scattering theory (MST) of wave propagation. Available results from the physics-based MST approach are used to evaluate the predictive capability of the filters, suggesting that the filters can severely underestimate the prediction of the MST approach.

sonic booms↗
DOE OSTI2021

Multiresolution classification of turbulence features in image data through machine learning

During large-scale simulations, intermediate data products such as image databases have become popular due to their low relative storage cost and fast in-situ analysis. Serving as a form of data reduction, these image databases have become more acceptable to perform data analysis on. In this work, we present an image-space detection and classification system for extracting vortices at multiple scales through wavelet-based filtering. A custom image-space descriptor is used to encode a large variety of vortex-types and a machine learning system is trained for fast classification of vortex regions. By combining a radial-based histogram descriptor, a bag of visual words feature descriptor, and a support vector machine, our results show that we are able to detect and classify vortex features at various sizes at multiple scales. Once trained, our framework enables the fast extraction of vortices on new, unknown image datasets for flow analysis.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1975

A digital algorithm for spectral deconvolution with noise filtering and peak picking: NOFIPP-DECON

Noise-filtering, peak-picking deconvolution software incorporates multiple convoluted convolute integers and multiparameter optimization pattern search. The two theories are described and three aspects of the software package are discussed in detail. Noise-filtering deconvolution was applied to a number of experimental cases ranging from noisy, nondispersive X-ray analyzer data to very noisy photoelectric polarimeter data. Comparisons were made with published infrared data, and a man-machine interactive language has evolved for assisting in very difficult cases. A modified version of the program is being used for routine preprocessing of mass spectral and gas chromatographic data.

Edwards, T. R.↗