Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Molecular aggregates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Orientation and Conformation of Proteins at the Air–Water Interface Determined from Integrative Molecular Dynamics Simulations and Sum Frequency Generation Spectroscopy

Understanding the assembly of proteins at the air-water interface (AWI) informs the formation of protein films, emulsion properties, and protein aggregation. Determination of protein conformation and orientation at an interface is difficult to resolve with a single experimental or simulation technique alone. To date, the interfacial structure of even one of the most widely studied proteins, lysozyme, at the AWI remains unresolved. Here in this study, molecular dynamics (MD) simulations are used to determine if the protein adopts a side-on, head-on, or axial orientation at the AWI with two different forcefields, GROMOS-53a6 + SPC/E and a99SB-disp + TIP4P-D. Vibrational sum frequency generation (SFG) spectroscopy experiments and spectral SFG calculations validate consistency between the structure determined from MD and experiments. Overall, we show with strong agreement that lysozyme adopts an axial conformation at pH 7. Further, we provide molecular-level insight as to how pH influences the binding domains of lysozyme resulting in side-on adsorption near the isoelectric point of the lysozyme.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ion Correlations Decrease Particle Aggregation Rate by Increasing Hydration Forces at Interfaces

The connection between solution structure, particle forces, and emergent phenomena at solid–liquid interfaces remains ambiguous. In this case study on boehmite aggregation, we established a connection between interfacial solution structure, emerging hydration forces between two approaching particles, and the resulting structure and kinetics of particle aggregation. In contrast to expectations from continuum-based theories, we observed a nonmonotonic dependence of the aggregation rate on the concentration of sodium chloride, nitrate, or nitrite, decreasing by 15-fold in 4 molal compared to 1 molal solutions. These results are accompanied by an increase in repulsive hydration forces and interfacial oscillatory features from 0.27–0.31 nm in 0.01 molal to 0.38–0.52 nm in 2 molal. Moreover, molecular dynamics (MD) simulations indicated that these changes correspond to enhanced ion correlations near the interface and produced loosely bound aggregates that retain electrolyte between the particles. In conclusion, we anticipate that these results will enable the prediction of particle aggregation, attachment, and assembly, with broad relevance to interfacial phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Polarized X-ray scattering measures molecular orientation in polymer-grafted nanoparticles

Polymer chains are attached to nanoparticle surfaces for many purposes, including altering solubility, influencing aggregation, dispersion, and even tailoring immune responses in drug delivery. The most unique structural motif of polymer-grafted nanoparticles (PGNs) is the high-density region in the corona where polymer chains are stretched under significant confinement, but orientation of these chains has never been measured because conventional nanoscale-resolved measurements lack sensitivity to polymer orientation in amorphous regions. Here, we directly measure local chain orientation in polystyrene grafted gold nanoparticles using polarized resonant soft X-ray scattering (P-RSoXS). Using a computational scattering pattern simulation approach, we measure the thickness of the anisotropic region of the corona and extent of chain orientation within it. These results demonstrate the power of P-RSoXS to discover and quantify orientational aspects of structure in amorphous soft materials and provide a framework for applying this emerging technique to more complex, chemically heterogeneous systems in the future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Precise Control of Phase Separation Enables 12% Efficiency in All Small Molecule Solar Cells

Abstract Compared to conjugated polymers, small‐molecule organic semiconductors present negligible batch‐to‐batch variations, but presently provide comparatively low power conversion efficiencies (PCEs) in small‐molecular organic solar cells (SM‐OSCs), mainly due to suboptimal nanomorphology. Achieving precise control of the nanomorphology remains challenging. Here, two new small‐molecular donors H13 and H14 , created by fluorine and chlorine substitution of the original donor molecule H11 , are presented that exhibit a similar or higher degree of crystallinity/aggregation and improved open‐circuit voltage with IDIC‐4F as acceptor. Due to kinetic and thermodynamic reasons, H13 ‐based blend films possess relatively unfavorable molecular packing and morphology. In contrast, annealed H14 ‐based blends exhibit favorable characteristics, i.e., the highest degree of aggregation with the smallest paracrystalline π–π distortions and a nanomorphology with relatively pure domains, all of which enable generating and collecting charges more efficiently. As a result, blends with H13 give a similar PCE (10.3%) as those made with H11 (10.4%), while annealed H14 ‐based SM‐OSCs have a significantly higher PCE (12.1%). Presently this represents the highest efficiency for SM‐OSCs using IDIC‐4F as acceptor. The results demonstrate that precise control of phase separation can be achieved by fine‐tuning the molecular structure and film formation conditions, improving PCE and providing guidance for morphology design.

Bin, Haijun↗
DOE OSTI2024

Dynamic Structural Change of Plant Epidermal Cell Walls under Strain

Abstract The molecular foundations of epidermal cell wall mechanics are critical for understanding structure–function relationships of primary cell walls in plants and facilitating the design of bioinspired materials. To uncover the molecular mechanisms regulating the high extensibility and strength of the cell wall, the onion epidermal wall is stretched uniaxially to various strains and cell wall structures from mesoscale to atomic scale are characterized. Upon longitudinal stretching to high strain, epidermal walls contract in the transverse direction, resulting in a reduced area. Atomic force microscopy shows that cellulose microfibrils exhibit orientation‐dependent rearrangements at high strains: longitudinal microfibrils are straightened out and become highly ordered, while transverse microfibrils curve and kink. Small‐angle X‐ray scattering detects a 7.4 nm spacing aligned along the stretch direction at high strain, which is attributed to distances between individual cellulose microfibrils. Furthermore, wide‐angle X‐ray scattering reveals a widening of (004) lattice spacing and contraction of (200) lattice spacing in longitudinally aligned cellulose microfibrils at high strain, which implies longitudinal stretching of the cellulose crystal. These findings provide molecular insights into the ability of the wall to bear additional load after yielding: the aggregation of longitudinal microfibrils impedes sliding and enables further stretching of the cellulose to bear increased loads.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Chalcogen effect on the photovoltaic performance of nonfused-ring small molecular electron acceptors for efficient organic solar cells

Fused-ring electron acceptors (FREAs) are the current working horse for the top performing organic solar cells (OSCs). Nevertheless, these FREAs surfer from high synthetic complexity, production costs and poor scalability, hindering their industrialization. Developing nonfused-ring electron acceptors (NFREAs) is a more feasible alternative solution towards future photovoltaic applications. Here, in this work, a series of NFREAs have been designed and synthesized by introducing chalcogen atoms on the side chains for OSCs. The introduced chalcogen atoms (O, S, and Se) not only modulated the energy levels but also finely tuned the intermolecular interactions. Especially, the formed S···S and Se···Se intermolecular interactions in TTS-4F and TTSe-4F resulted in higher molecular crystallinity than TTO-4F. Unexpectedly, the strong Se···Se interactions also led the aggregation of TTSe-4F and formation of large domains in the PM6:TTSe-4F blend. The moderate S···S interactions in TTS-4F enabled an optimal phase separation with more ideal nano fibrils distributed in the PM6:TTS-4F blend, facilitating the charge separation and transport. As a result, TTS-4F based devices achieved a champion power conversion efficiency (PCE) of 14.74%, higher than the TTO-4F (8.76%) and TTSe-4F (11.56%) based devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Poly(N-isopropylacrylamide)-grafted gold nanoparticles at the vapor/water interface

Hypothesis: Grafting nanoparticles surfaces with water-soluble polymers modify interparticle interactions that are pivotal for assembling them into ordered phases. By manipulating salt concentrations of gold nanoparticles (AuNPs) that are grafted with poly(N-isopropylacrylamide) (PNIPAM-AuNPs), we hypothesize that various aggregated phases form at the suspension/vapor interface or in the bulk that depend on the molecular weight (MW) of PNIPAM and on salt concentrations. Experiments: AuNPs are grafted with thiolated PNIPAM of molecular weights of 3 or 6 kDa, and grafting is confirmed by dynamic light scattering. Liquid-surfaces X-ray reflectivity and grazing incidence small-angle X-ray scattering are used to determine the density profiles of the suspension/vapor interface and their inplane structure as salt is added to the suspensions. Findings: We observe that surface enrichment is induced by adding NaCl to the suspensions, and that at low salt concentrations, the monoparticle layer formed is dispersed, and above a threshold salt concentration, depending on MW of PNIPAM, the PNIPAM-AuNPs order in a hexagonal structure. We show that the lattice constant of the two-dimensional hexagonal structure varies with salt concentration, and more significantly with MW of PNIPAM.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Modulating Solvation Structure in Concentrated Aqueous Organic Redox Flow Battery Electrolyte for Solubility and Transport Enhancement via Polycomplex Ion

Aqueous organic redox flow batteries hold great promise as a technology for creating economical grid energy storage using sustainable materials. Nonetheless, the solubility limit presents a universal barrier for all redox-active organic molecules. In this paper, a new approach is proposed to surpass the solubility limit by manipulating the solvation structure with polycomplex ion additives (PIA). Using poly(3,4-ethylenedioxythiophene) polystyrenesulfonate colloids as one example, its role in dismantling the rigid supramolecular clusters within the highly concentrated 7,8-dihydroxyphenazine-2-sulfonic acid electrolyte is investigated. 1 H and 23 Na NMR spectra and molecular dynamics simulation studies demonstrate that the bipolar structure of the PIA effectively disrupts the aggregations of DHPS and Na + ion in the highly concentrated anolyte, thus rendering a more flexible solvation structure and less restrictive ion transport, leading to substantially improved battery performance of an AORFB cell. The anolyte with PIA achieved 1.6 M and 74.3 Ah L –1 anolyte energy capacity.

25 ENERGY STORAGE↗
DOE OSTI2024

Confinement-induced clustering of H 2 and CO 2 gas molecules in hydrated nanopores

Gas molecule clustering within nanopores holds significance in the fields of nanofluidics, biology, gas adsorption/desorption, and geological gas storage. However, the intricate roles of nanoconfinement and surface chemistry that govern the formation of gas clusters remain inadequately explored. In this study, through free energy calculation in molecular simulations, we systematically compared the tendencies of H 2 and CO 2 molecules to aggregate within hydrated hydrophobic pyrophyllite and hydrophilic gibbsite nanopores. The results indicate that nanoconfinement enhances gas dimer formation in the nanopores, irrespective of surface chemistry. However, surface hydrophilicity prohibits the formation of gas clusters larger than dimers, while large gas clusters form easily in hydrophobic nanopores. Despite H 2 and CO 2 both being non-polar, the larger quadrupole moment of CO 2 leads to a stronger preference for dimer/cluster formation compared to H 2 . Here, our results also indicate that gases prefer to enter the nanopores as individual molecules, but exit the nanopores as dimers/clusters. This investigation provides a mechanistic understanding of gas cluster formation within nanopores, which is relevant to various applications, including geological gas storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Temperature-based reactive flow model for TATB plastic bonded explosives

A new reactive flow model is presented for TATB-based plastic bonded explosives, applicable to shock initiation and detonation problems of differing initial temperature. Temperature disequilibrium is assumed between unreacted explosive, material in the vicinity of compressed defects (called hot spots), and detonation products. The model incorporates temperature-dependent decomposition reaction rates. Arrhenius model parameters were derived from subscale quantum-based molecular dynamics simulations of shock-induced TATB decomposition. Further, a model of detonation carbon aggregation is incorporated, describing the late-time slow release of energy inherent to detonation in TATB-based materials. The predictive ability of the model in the shock initiation regime is tested against recent thin pulse experiments on PBX 9502. Here, the model is found to perform equally well in predicting the size effect curve of ambient, cold, and hot PBX 9502 rate sticks.

Chemistry - Chemical explosives↗
DOE OSTI2020

Self-Assembled Solute Networks in Crowded Electrolyte Solutions and Nanoconfinement of Charged Redoxmer Molecules

Redoxmers are electrochemically active organic molecules storing charge and energy in electrolyte fluids circulating through redox flow batteries (RFBs). Such molecules typically have solvent-repelling cores and solvent-attracting pendant groups introduced to increase solubility in liquid electrolytes. These two features can facilitate nanoscale aggregation of the redoxmer molecules in crowded solutions. In some cases, this aggregation leads to the emergence of continuous networks of solute molecules in contact, and the solution becomes microscopically heterogeneous. In this study, we used small-angle X-ray scattering (SAXS) and molecular dynamics modeling to demonstrate formation of such networks and examine structural factors controlling this self-assembly. We also show that salt ions become excluded from these solute aggregates into small pockets of electrolytes, where these ions strongly associate. This confinement by exclusion is also likely to occur to charged redoxmer molecules in a “sea” of neutral precursors coexisting in the same solution. Here, we demonstrate that the decay lifetime of the confined charged molecules in such solutions can increase several fold compared to dilute solutions. We attribute this behavior to a “microreactor effect” on reverse reactions of the confined species during their decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

MCCCS-MN

The MCCCS‒MN (Monte Carlo for Complex Chemical Systems‒Minnesota) software is developed by the Siepmann research group at the University of Minnesota. MCCCS‒MN allows for the simulation of multi-component molecular systems in the canonical, isobaric-isothermal (including constant stress for solids), grand-canonical, semi-grand, and Gibbs (NVT, NPT, and more than two simulation boxes) ensembles. It uses the configurational-bias Monte Carlo method to efficiently sample phase space for linear, branched and cyclic chain molecules, the adiabatic nuclear and electronic sampling Monte Carlo method to treat many-body polarization effects, and the aggregation-volume-bias Monte Carlo algorithm to efficiently sample the spatial distribution of associating molecules. MCCCS-MN employs a molecular representation of the system where force fields contain bonded and non-bonded terms. Funding for the development of MCCCS-MN through grants from the National Science Foundation (simulation of fluid phase equilibria and chromatography) and the Department of Energy (simulation of adsorption equilibria) is gratefully acknowledged.

Siepmann, J.Ilja [University of Minnesota - Twin C↗
DOE OSTI2022

Ionic Liquid Facilitated Solvent‐Phase Polymerization of Ultrasmooth Coatings of Polycatecholamines

Mussel-inspired polycatecholamine coatings and films have proven to be versatile materials for surface modification. However, the progress of chemically modified coatings with tailored properties has been slow due to the lack of definitive evidence of their polymeric structure. Polycatecholamines form aggregates during polymerization, and their formation mechanism has been a subject of debate owing to their insolubility in traditional molecular solvents. Exploiting the capability of ionic liquids (ILs) to exhibit strong electrostatic interactions, herein, the first solution-phase polymerization approach is reported to achieve polymerization of four catecholamines – dopamine (DA), norepinephrine (NE), L-3,4-dihydroxyphenylalanine (L-DOPA), and adrenaline (AD). Kinetic control over the polymerization process in the solution phase enabled it to follow the process with 1 H NMR spectroscopy, revealing the formation of structural features of resulting complex heterogeneous and soluble polymers. The polymers are both covalent and associative in nature. Solution phase polymerization prevented the formation of large aggregates in the solution, thus facilitating the formation of coatings that are ultra-smooth and have root mean square roughness of the order of sub-nm to nm scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Why Does Oriented Attachment Produce Low-Dimensional Structures?

Oriented attachment is a nonclassical crystal growth mechanism that frequently leads to the formation of low-dimensional nanocrystals, such as nanowires or nanoplates, as well as intricately branched nanocrystals. This chapter discusses several experimentally observed instances of such structures, as well as theoretical efforts to understand them. Recent molecular-dynamics simulation studies in our group aimed at understanding how oriented attachment could promote the aggregation of Ag nanoplates to produce two-dimensional sheets are highlighted. Here, the mechanism found in this study may extend to other systems for which lowdimensional crystal growth occurs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

O-GlcNAc forces an α-synuclein amyloid strain with notably diminished seeding and pathology

Amyloid-forming proteins such α-synuclein and tau, which are implicated in Alzheimer’s and Parkinson’s disease, can form different fibril structures or strains with distinct toxic properties, seeding activities and pathology. Understanding the determinants contributing to the formation of different amyloid features could open new avenues for developing disease-specific diagnostics and therapies. Here we report that O-GlcNAc modification of α-synuclein monomers results in the formation of amyloid fibril with distinct core structure, as revealed by cryogenic electron microscopy, and diminished seeding activity in seeding-based neuronal and rodent models of Parkinson’s disease. Although the mechanisms underpinning the seeding neutralization activity of the O-GlcNAc-modified fibrils remain unclear, our in vitro mechanistic studies indicate that heat shock proteins interactions with O-GlcNAc fibril inhibit their seeding activity, suggesting that the O-GlcNAc modification may alter the interactome of the α-synuclein fibrils in ways that lead to reduce seeding activity in vivo. Our results show that posttranslational modifications, such as O-GlcNAc modification, of α-synuclein are key determinants of α-synuclein amyloid strains and pathogenicity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Associative polymers with controlled sticker placement: How reversible bond distribution and density govern polymer dynamics

Associative polymers with precisely arranged stickers offer opportunities to program material properties with molecular precision. Yet, it remains unclear how the placement and fraction of stickers dictate structure, dynamics, and macroscopic properties. By developing a model unentangled polymer system with hydrogen-bonding stickers, we show that randomly distributed stickers neither form clusters nor change flow properties, whereas stickers placed at chain ends drive nanocluster formation even at low concentrations. Adding more end stickers produces a rubbery plateau spanning eight decades in frequency with two distinct relaxation timescales, in contrast to the single plateau predicted by the classic sticky Rouse model. These results demonstrate that sticker distribution dictates whether associative polymers undergo nanocluster formation or microphase separation, while substantial alterations in dynamics and viscoelasticity require both sticker aggregation and thermomechanical stability of associated domains. Our findings resolve a longstanding debate on associative polymer dynamics and provide molecular design rules for programmable soft materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Variable-Temperature Scattering and Spectroscopy Characterizations for Temperature-Dependent Solution Assembly of PffBT4T-Based Conjugated Polymers

The solution structure of conjugated polymers (CPs) from which the films are cast is critical for tailoring the thin-film morphology thus device performance. Here, we used multimodal variable-temperature scattering and spectroscopy tools to fully quantify the solution assembly of poly[(5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3'''-dialkyl-2,2';5',2'';5'',2'''-quaterthiophen-5,5'''-diyl)] (PffBT4T) polymers with varying side-chain lengths at different assembly temperatures. The conformational and aggregation behaviors for PffBT4T-based CPs were found to be very sensitive to both temperature and side chain length using ultraviolet–visible (UV–vis) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, dynamic light scattering (DLS), and small-angle neutron scattering (SANS). We found that with slightly increasing side chain length from 2-octyldodecyl (C8C12) to 2-nonyltridecyl (C9C13), PffBT4T-based CPs show a significant decrease in aggregation-to-dissolved chain transition temperature (10 °C), degree of aggregation, enthalpy change of aggregation, and size of the aggregates in solution. At room temperature, PffBT4T polymer strongly aggregated to form fabric structure with the film thickness of a few nanometers in thickness and hundreds of nanometers in length, as probed by atomic force microscopy (AFM), transmission electronic microscopy (TEM), and dynamic light scattering (DLS). At the elevated temperature above the aggregation-to-dissolved chain transition temperature, PffBT4T is fully dissolved and adopts a semiflexible coil conformation with the persistence length of 3.1 nm for PffBT4T-C8C12 and a slightly increased persistence length of 3.4 nm for PffBT4T-C9C13, according to temperature-dependent SANS measurements. Longer side chains of PffBT4T-C9C13 also lead to less aggregation enthalpy gain compared with PffBT4T-C8C12. This work provides a solution structure manipulating strategy of CPs and thus will inspire the molecular design and processing protocols of CPs toward higher performance electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Influence of substituents on the vectorial difference static dipole upon excitation in synthetic bacteriochlorins

Organic dye aggregates have been shown to exhibit exciton delocalization in natural and synthetic systems. Such dye aggregates show promise in the emerging area of quantum information science (QIS). We believe that the difference static dipole (Δd) is an essential dye parameter in the development of molecular QIS systems. However, a foundational understanding of the structural factors influencing Δd remains elusive. Bacteriochlorins play a vital role in photosynthesis due to their exceptional photophysical properties. Therefore, bacteriochlorins are particularly suitable dyes for the construction of aggregate systems for QIS. Synthetic bacteriochlorins further offer stability and tunability via chemical modifications. Here, the influence of substituents on the Δd of monomeric (non-aggregated) dyes was investigated via density functional theory (DFT) and time-dependent (TD-)DFT in a set of 5-methoxybacteriochlorins progressively substituted with ethynyl, phenyl, and phenylethynyl substituents at the 3,13- and 3,13,15-positions of the macrocycle. Symmetrically substituted 5-methoxybacteriochlorins were shown to have the largest Δd. The increase in Δd in the series of dyes was largely due to changes in orientation of the static dipole upon excitation rather than large changes in magnitude. In addition, the transition dipole (μ) and the angle between Δd and μ (ζ) were calculated. Three 5-methoxybacteriochlorins with high predicted Δd and μ were synthesized and characterized spectroscopically. The trend in Δd values empirically determined using the solvatochromic Stokes shift method was comparable with the DFT calculations.

36 MATERIALS SCIENCE↗