Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Model interpretation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Shedding Light on the Dark Sector with Direct WIMP Production

A Weakly Interacting Massive Particle (WIMP) provides an attractive dark matter candidate, and should be within reach of the next generation of high-energy colliders. We consider the process of direct WIMP pair-production, accompanied by an initial-state radiation photon, in electron-positron collisions at the proposed International Linear Collider (ILC). We present a parametrization of the differential cross section for this process which conveniently separates the model-independent information provided by cosmology from the model-dependent inputs from particle physics. As an application, we consider two simple models, one supersymmetric, and another of the 'universal extra dimensions'' (UED) type. The discovery reach of the ILC and the expected precision of parameter measurements are studied in each model. For each of the two examples, we perform a shape-discrimination analysis of the photon energy spectrum and show that in a large part of the relevant parameter space it allows to rule out the alternative model interpretation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Localized divertor leakage measurements using isotopic tungsten sources during edge-localized mode-y H-mode discharges on DIII-D

Experiments carried out on DIII-D using a novel setup of isotopic tungsten (W) sources in the outer divertor have characterized how the W leakage from this region depends on both the exact source location and edge-localized mode (ELM) behavior. The sources are toroidally-symmetric and poloidally-localized to two regions: (1) the outer strike point (OSP) with natural abundance of W isotopes; and (2) the far-target with highly-enriched 182 W isotopes. With the use of a dual-faced collector probe (CP) in the main scrape-off layer (SOL) near the outside midplane and source-rate spectroscopy, a proxy for divertor impurity leakage is developed herein. Using this proxy, it is found that for the OSP W location, there is a nearly linear increase of leakage with the power across the separatrix ( ), which is consistent with the effect of an increased upstream ion temperature parallel gradient force in the near-SOL; trends in the pedestal density and collisionality are also seen. Conversely, it is found that for the far-target W location leakage falls off rapidly as increases and ELM size decreases, which is suggestive that ELM size plays a role in the leakage from this location. Indications for main SOL W contamination is evidenced by the measurement of large deposition asymmetries on the two opposite CP faces. These measurements are coupled with interpretive modeling showing SOL W accumulation near the separatrix furthest from both targets driven by forces parallel to the magnetic field. This experimental setup, together with the target and upstream W measurements, provides information on the transport from different divertor W source locations and leakage. These studies help to elucidate the physics driving divertor impurity source rates and leakage, with and without ELMs, and provide better insight on the link in the chain connecting wall impurity sources to core impurity levels in magnetic fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The role of B T -dependent flows on W accumulation at the edge of the confined plasma

Abstract Near-separatrix impurity accumulation between the crown and the outer midplane of tokamaks is a common feature in results from codes such as SOLPS-ITER and DIVIMP; however, experimental evidence of accumulation has only recently been obtained and is reported here. The codes find that the poloidal distribution of impurity ions in the scrape-off layer (SOL) depends primarily on toroidal field ( B T )-dependent parallel flow patterns of the background plasma and the parallel ion temperature gradient (∇ ‖ T ion ) force. Experimentally, Mach probes used in L-mode plasmas with favorable (for H-mode access) B T measure fast ( M ∼ 0.3–0.5) inner-target-directed (ITD) background plasma flows at the crown of single-null discharges. This study reports a set of DIVIMP simulations for two similar H-mode discharges from the DIII-D W metal rings campaign differing primarily in B T -direction to assess the effect that fast ITD flows have on the distribution of W ions in the SOL. It is found that for imposed ITD flows of M = 0.3, W ions that otherwise accumulate due to the ∇ ‖ T ion -force are largely flushed out. It is also found that doubling the radial diffusion coefficient from 0.3 to 0.6 m 2 s −1 prevents accumulation due to rapid cross-field transport into the far-SOL, where background plasma flows drain W ions to the divertors. Far-SOL W distributions from DIVIMP are then used to specify input to the impurity transport code 3DLIM, which is used to interpretively model collector probe (CP) deposition patterns measured in the ‘wall-SOL’. It is demonstrated that the deposition patterns are consistent with the DIVIMP predictions of near-SOL accumulation for the unfavorable- B T direction, and little/no accumulation for the favorable- B T direction. The wall-SOL CPs have thus provided the first experimental evidence, albeit indirect, of near-SOL W accumulation—finding it occurs for the unfavorable- B T direction only. For the favorable- B T direction, fast flows can largely prevent accumulation from occurring.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Turbulent drifts of impurity ions as an explanation for anomalous radial transport in the far-SOL of DIII-D

Abstract Successful fusion reactor operation relies on minimal core contamination by impurities, otherwise too much power may be radiated and harm performance. This requires reliable predictions of impurity transport from the scrape-off layer (SOL) into the core, beyond the traditional ‘anomalous’ diffusion approach. We report a set of far-SOL tungsten transport simulations that demonstrate the role of turbulent drifts on radial impurity transport. A turbulent plasma background is simulated using the gyrokinetic SOL code Gkeyll. Tungsten ions are followed within the plasma background using only their drifts. We find that tungsten tends to travel radially outwards with velocities between v r = 300–1200 m s −1 primarily due to polarization drift. We also extract an anomalous radial diffusion coefficient that varies from D r anom = 5–20 m 2 s −1 . These results are compared to and agree with previous interpretive modeling results. We also show how the turbulent polarization drift can transport some tungsten ions from the wall inwards with effective pinch velocities up to 10 000 m s −1 . We conclude that turbulent drifts are a likely explanation for historically anomalous radial impurity transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Progress in pedestal and edge physics: Chapter 3 of the special issue: on the path to tokamak burning plasma operation

This paper describes the extensive progress that has been made in the understanding of tokamak pedestal physics since the 2007 publication of ‘Progress in the ITER Physics Basis’ (Ikeda 2007 Nucl. Fusion 47 E01–S500). It serves as Chapter 3 of the 2025 Nuclear Fusion Special Issue titled ‘On the Path to Tokamak Burning Plasma Operation’ (Campbell et al 2025 Nucl. Fusion ). This review was compiled by the pedestal and edge physics (PEP) community affiliated with the International Tokamak Physics Activity organization. It attempts to collect in one place citations to the majority of published literature on the pedestal physics topics that will be most important for the operation of a future power producing burning plasma tokamak. These include citations to publications describing the physics of the pedestal plasmas in many operating tokamaks worldwide and the pedestal physics projections for several near-term future devices including ITER. Descriptions of experimental results, interpretive modeling and predictive extrapolations are integrated together and comprehensive references are provided. This review is organized around four primary technical sections, viz.: pedestal structure, edge localized mode (ELM) characteristics, ELM control and regimes without large ELMs. Key results from many of the references are described briefly and set into the tokamak burning plasma power plant context. In addition, different perspectives on pedestal physics topics that are currently under debate within the community are also described, to provide guidance on needs for future research. Finally, attempts are made to describe conclusions from all of this progress consistent with discussions by the pedestal physics community at this time. The goal of this review is to provide a useful reference document for pedestal physics researchers going forward toward operation of a burning tokamak fusion plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Identification of Prompt Proton Emission in $N = Z - 1$ 61 Ga: Isospin Symmetry at the Limit of Nuclear Binding

Excited states in the proton drip line nucleus 61 Ga were populated via the fusion-evaporation reaction 24 Mg ⁢( 40 Ca, 𝑝⁢2⁢𝑛)⁢ 61 Ga. The experimental setup at Argonne National Laboratory comprised a novel combination of the Gammasphere array with two CD-shaped double-sided Si-strip detectors inside the Microball CsI(Tl) charged-particle detection array, as well as the Neutron-Shell liquid scintillators and the Fragment Mass Analyzer. Owing to the setup’s unprecedented in-beam proton spectroscopy and tracking capabilities, a coincidence between a 957.6(5)-keV 𝛾 ray and a 1.876(24)-MeV proton line was observed, which identifies the quasibound proton 𝜋⁢𝑔 9/2 single-particle state in 61 Ga at 𝐸 𝑥 = 2150⁢(34) keV. This probes isospin symmetry at the limit of nuclear binding by providing a unique challenge for the shell-model interpretation of mirror nuclei beyond doubly magic 56 Ni .

Hrabar, Yuliia [Lund Univ. (Sweden)] (ORCID:000000↗

Lifetime measurements and shape coexistence in {sup 144}Dy

The known level scheme of {sup 144}Dy has been extended and lifetime measurements have been made with the recoil-distance Doppler-shift method. Reduced transition probabilities and deformations have been determined for four low-lying transitions. These states form part of the first observed band crossing, giving information on the change in nuclear deformation resulting from the rearrangement of h{sub 11/2} protons in the nucleus. Two bands built upon excited 10{sup +} states have been assigned pi(h{sub 11/2}){sup 2} prolate and nu(h{sub 11/2}){sup -2} oblate configurations with tau=12(2)ps and 0.01<tau < or approx. 16ns, respectively. These long lifetimes are reasoned to be a result of shape coexistence at low energy and moderate spin. A known four-quasiparticle dipole band has been extended to higher spin and lifetime measurements suggest a long-lived bandhead state. In this case, the excited states in the band may be consistent with a shears model interpretation of a magnetic dipole rotor. However, the measured B(M1)/B(E2) branching ratios reveal a larger than expected deformed rotational component compared with that in the analogous band in the lower mass isotone {sup 142}Gd.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Probabilistic neural networks for fluid flow surrogate modeling and data recovery

We consider the use of probabilistic neural networks for fluid flow surrogate modeling and data recovery. This framework is constructed by assuming that the target variables are sampled from a Gaussian distribution conditioned on the inputs. Consequently, the overall formulation sets up a procedure to predict the hyperparameters of this distribution which are then used to compute an objective function given training data. We demonstrate that this framework has the ability to provide for prediction confidence intervals based on the assumption of a probabilistic posterior, given an appropriate model architecture and adequate training data. The applicability of the present framework to cases with noisy measurements and limited observations is also assessed. To demonstrate the capabilities of this framework, we consider canonical regression problems of fluid dynamics from the viewpoint of reduced-order modeling and spatial data recovery for four canonical data sets. The examples considered in this study arise from (i) the shallow-water equations, (ii) a two-dimensional cylinder flow, (iii) the wake of a NACA0012 airfoil with a Gurney flap, and (iv) the NOAA sea surface temperature data set. Furthermore, the present results indicate that the probabilistic neural network not only produces a machine-learning-based fluid flow surrogate model but also systematically quantifies the uncertainty therein to assist with model interpretability.

42 ENGINEERING↗

A priori precision estimation for neutron triples counting

The nondestructive assay of Plutonium bearing items for criticality, safety, security, safeguards, inventory balance, process control, waste management and compliance is often undertaken using correlated neutron counting. In particular Multiplicity Shift Register analysis allows one to extract autocorrelation parameters from the pulse train which can, within the framework of a simple interpretational model, be related to the effective {sup 240}Pu spontaneous fission mass present. The effective {sup 240}Pu mass is a weighted sum of the {sup 238}Pu, {sup 240}Pu and {sup 242}Pu masses so if the relative isotopic composition of the Pu can be established from the measured {sup 240}Pu effective mass one can estimate the total Pu mass and also the masses of the individual isotopes, example the fissile species {sup 239}Pu and {sup 241}Pu. In multiplicity counting three counting rates are obtained. These are the Singles, Doubles and Triples rates. The Singles rate is just the gross, totals or trigger rate. The Doubles and Triples rates are calculated from factorial moments of the observed signal triggered neutron multiplicity distributions following spontaneous fission in the item and can be thought of as the rate of observed coincident pairs and coincident triplets on the pulse train. Coincident events come about because the spontaneous fission and induced fission chains taking place in the item result in bursts of neutrons. These remain time correlated during the detection process and so retain information, through the burst size distribution, about the Pu content. In designing and assessing the performance of a detector system to meet a given goal it is necessary to make a priori estimates of the counting precision for all three kinds of rates. This is non-trivial because the counting does not obey the familiar rules of a Poissonian counting experiment because the pulse train has time correlated events on it and the train is sampled by event triggered gates that may overlap. For Singles and Doubles simple approximate analytical empirical rules for how to estimate the variance have been developed guided by theory and refined by experiment. However, for Triples no equivalent rules have been put forward and tested until now. In this work we propose an analytical expression, the CSH relation, for the variance on the Triples count and exercise it against experimental data gathered for Pu items measured in the Los Alamos National Laboratory's Epithermal Neutron Multiplicity Counter (ENMC). Preliminary results are encouraging and reasonable agreement with observation, considered fit for scoping studies, is obtained. We have also looked at the behavior using Monte Carlo simulations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

From Data to Insights: A Covariate Analysis of the IARPA BRIAR Dataset for Multimodal Biometric Recognition Algorithms at Altitude and Range

This paper examines covariate effects on fused whole body biometrics performance in the IARPA BRIAR dataset, specifically focusing on UAV platforms, elevated positions, and distances up to 1000 meters. The dataset includes outdoor videos compared with indoor images and controlled gait recordings. Normalized raw fusion scores relate directly to predicted false accept rates (FAR), offering an intuitive means for interpreting model results. A linear model is developed to predict biometric algorithm scores, analyzing their performance to identify the most influential covariates on accuracy at altitude and range. Weather factors like temperature, wind speed, solar loading, and turbulence are also investigated in this analysis. The study found that resolution and camera distance best predicted accuracy and findings can guide future research and development efforts in long-range/elevated/UAV biometrics and support the creation of more reliable and robust systems for national security and other critical domains.

Bolme, David↗

Effect of progressively increasing lithium conditioning on edge transport and stability in high triangularity NSTX H-modes

A sequence of H-mode discharges with increasing levels of pre-discharge lithium evaporation (dose) was conducted in high triangularity and elongation boundary shape in NSTX. Energy confinement increased, and recycling decreased with increasing lithium dose, similar to a previous lithium dose scan in medium triangularity and elongation plasmas. Data-constrained SOLPS interpretive modeling quantified the edge transport change: the electron particle diffusivity decreased by 10-30x. The electron thermal diffusivity decreased by 4x just inside the top of the pedestal, but increased by up to 5x very near the separatrix. These results provide a baseline expectation for lithium benefits in NSTX-U, which is optimized for a boundary shape similar to the one in this experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DynamicME: dynamic simulation and refinement of integrated models of metabolism and protein expression

Background Genome-scale models of metabolism and macromolecular expression (ME models) enable systems-level computation of proteome allocation coupled to metabolic phenotype. Results We develop DynamicME, an algorithm enabling time-course simulation of cell metabolism and protein expression. DynamicME correctly predicted the substrate utilization hierarchy on a mixed carbon substrate medium. We also found good agreement between predicted and measured time-course expression profiles. ME models involve considerably more parameters than metabolic models (M models). We thus generate an ensemble of models (each model having its rate constants perturbed), and then analyze the models by identifying archetypal time-course metabolite concentration profiles. Furthermore, we use a metaheuristic optimization method to calibrate ME model parameters using time-course measurements such as from a (fed-) batch culture. Finally, we show that constraints on protein concentration dynamics (“inertia”) alter the metabolic response to environmental fluctuations, including increased substrate-level phosphorylation and lowered oxidative phosphorylation. Conclusions Overall, DynamicME provides a novel method for understanding proteome allocation and metabolism under complex and transient environments, and to utilize time-course cell culture data for model-based interpretation or model refinement.

Mathematical & Computational Biology↗

Machine learning of factors for improving oyster hatchery production

Oyster aquaculture and restoration in the Chesapeake Bay are vital, yet hatcheries frequently struggle with inconsistent larval growth and sudden mass mortality events. Unpredictable disruptions in larval production cause large economic losses, represent a perceived risk to growers, and impede industry expansion. To better understand associations between production yield and its potential predictors, we applied machine learning (random forest, and neural network) and statistical (generalized additive model) models to a comprehensive dataset of environmental, water quality, and operational parameters from a Maryland oyster hatchery, aiming to identify key yield predictors and develop a robust forecasting tool. We used recursive Boruta algorithm for variable selection, pinpointing critical predictors, and employed cross-validation to fine-tune model settings. Shapley value analysis offered crucial insights into model interpretations, highlighting week number, Normalized Difference Vegetation Index, salinity, turbidity, and fecundity as primary drivers of yield variability. For low-yield cases, salinity-related variables were particularly important. Our findings provide an early warning system for potential production downturns, empowering hatchery operators to make data-driven decisions for optimizing water conditions, feeding schedules, and broodstock management. By boosting predictability and efficiency, this research directly supports economic stability of the oyster industry and ecological health of the Chesapeake Bay.

Vishwakarma, Srishti [Oak Ridge National Laborator↗

Search for squarks and gluinos using final states with jets and missing transverse momentum with the ATLAS detector in s = 7 TeV proton-proton collisions

CERN-LHC. Study of events having final states with no leptons, jets and missing transverse momentum, and with no reconstructed electrons or muons, in proton-proton collisions at a centre-of-mass energy of 7 TeV. Data are selected with various cuts and criteria to enhance different physics regions as described in the text of the paper. Exclusion limits on gluino and squark masses in SUSY models are presented for a simplified model (described in the paper) together with limits on m_0 and m_1/2 in MSUGRA/CMSSM models. The data sample has a total integrated luminosity of 1.04 FB-1 and shows no excess above the Standard Model background. Additional model interpretations are given in the Conference Note.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Linear viscoelastic measurements of commerical therapy putties for design and intuition

This dataset complements the publication Mapping Linear Viscoelasticity for Design and Tactile Intuition (Corman & Ewoldt, 2019). It contains rigorous shear rheometry measurements for six commercial silicone putties, including creep recovery, SAOS, LAOS, and stress relaxation. Additional, unpublished data was generated as part of a graduate rheology course taught by Randy Ewoldt at University of Illinois Urbana-Champaign. Together, these datasets provide a comprehensive example of linear viscoelasticity of a commercial material. The collection is intended both as a pedagogical resource for developing physical intuition in linear viscoelasticity and as a reference dataset for data interpretation, model fitting, and comparative rheological analysis.

C. Marsh, Maxwell↗

Modification Of The Electron Energy Distribution Function During Lithium Experiments On The National Spherical Torus Experiment

The National Spherical Torus Experiment (NSTX) has recently studied the use of a liquid lithium divertor (LLD). Divertor Langmuir probes have also been installed for making measurements of the local plasma conditions. A non-local probe interpretation method is used to supplement the classical probe interpretation and obtain measurements of the electron energy distribution function (EEDF) which show the occurrence of a hot-electron component. Analysis is made of two discharges within a sequence that exhibited changes in plasma fueling efficiency. It is found that the local electron temperature increases and that this increase is most strongly correlated with the energy contained within the hot-electron population. Preliminary interpretative modeling indicates that kinetic effects are likely in the NSTX.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Phase changes in fluoropolymer binders

Motivation: Understanding fluoropolymer binder structure and aging response continues to be an important goal for the prediction and assessment of polymer bonded explosive compositions within the stockpile. As part of ongoing efforts within NNM, we are developing new methods to quantify crystallization and chemical degradation within aged Fluoropolymer materials. Significance: Time, temperature and radiation are known to alter the mechanical properties of fluoropolymers as crystalline domains nucleate and grow within the material. However, current methods do not accurately quantify and assess the degree or rapidity of these physical aging processes. For this reason, we are developing methods that directly measure crystalline domain, composition, size and shape and cross-correlating them with traditional techniques. Progress: Most recently, we thermally aged fluoropolymer binder, FK800, for various durations up to 23 days at several temperatures including: 25C (red), 35C (green), and 60C (blue). We used wide angle X-ray scattering (WAXS) to observe when crystalline peaks emerged, signaling a phase transition from amorphous to partially crystalline. Some of these data are summarized in Figure 1. As expected, samples held at 25C (red), which is below the glass transition temperature at 28C, remain amorphous – the WAXS data (Figure 1b) lacks sharp peaks indicative of crystallinity and the ultra-small angle X-ray scattering (USAXS) also has a smooth background without peaks indicative of structure (Figure 1a). By contrast, samples held at 35C and 60C have new peaks in both the USAXS and WAXS data. The structure is clearer after subtracting off the amorphous background from the WAXS data (Figure 1c). These data show that samples aged at 60C are more crystalline as determined by the more defined peaks and also have a larger lattice constant as seen by the shift in peak position as compared to the 35C samples. The corresponding USAXS data (Figure 1a) indicate that the size of the crystals was larger at 60C than at 35C as seen by the shift in the knee position to lower q-values. Interestingly, the shape of the scatter curve also changed, which indicates a change in morphology. Atomic force microscopy (AFM) was used to image the fluoropolymer (Figure 1c-e). At 35C, ~50nm long stacked crystal plates are observed. High resolution imaging shows that the stacks consist of 2-6 lamellae that are spaced approximately 3nm apart. At 60C, the individual lamella appear both thicker and longer and are intertwined to fill the surface. Morphological data such as these images help to interpret & model volume averaging techniques like X-ray scattering and NMR. We also expect the shift from isolated islands to intertwined clusters to impact mechanical properties.

36 MATERIALS SCIENCE↗

Sandia-UT Academic Alliance Project Summary

This project seeks to leverage various hyperspectral tensor products for the purposes of target classification/detection/prediction. In addition to hyperspectral, these products may be images, time series, geometries, or other modalities. The scenarios in which the targets of interest must be identified are typically from remote sensing platforms such as satellites. As such, there are numerous real-world constraints that drive algorithmic formulation. Cost, complexity, and feasibility of the algorithm should all be considered. Targets of interest are exceedingly rare, and collecting many data samples is prohibitively expensive. Furthermore, model interpretability is paramount due to the application space. The goal of this project is to develop a constrained supervised tensor factorization framework for use on hyperspectral data products. Supervised tensor factorizations already exist in the literature, although they have not seen widespread adoption in the remote sensing domain. The novelty of this project will be the formulation and inclusion of constraints that take into account mission considerations and physics based limits to learn a factorization that is both physically interpretable and mission deployable. This will represent a new contribution to the field of remote sensing for performing supervised learning tasks with hyperspectral data.

97 MATHEMATICS AND COMPUTING↗