Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magnetization switching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Positive spin Hall magnetoresistance in single-crystalline Pt/CoO(001) bilayers

Here, the spin Hall magnetoresistance (SMR) effect in single-crystalline Pt/CoO(001) bilayers has been systematically investigated. X-ray magnetic linear dichroism measurements prove that CoO antiferromagnetic (AFM) spins can be switched into the direction orthogonal to the applied field. We find the SMR signal is comprised of two components related to either the switching of CoO AFM Néel order or the applied strong field effect. Both SMR components show a “positive” angular dependence with $R_{∥} > R_{⊥}$, while $R_{∥} (R_{⊥})$ is defined as the resistance with the applied in-plane field parallel (perpendicular) to the current. The observed positive SMR is mainly attributed to the uncompensated spins at the Pt/CoO interface, instead of the CoO AFM spins. Our study may attract a great deal of interest to understand the complicated SMR effect in AFM spintronics materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Spin Waves and Magnetic Exchange Hamiltonian in CrSBr

Abstract CrSBr is an air‐stable two‐dimensional (2D) van der Waals semiconducting magnet with great technological promise, but its atomic‐scale magnetic interactions—crucial information for high‐frequency switching—are poorly understood. An experimental study is presented to determine the CrSBr magnetic exchange Hamiltonian and bulk magnon spectrum. The A ‐type antiferromagnetic order using single crystal neutron diffraction is confirmed here. The magnon dispersions are also measured using inelastic neutron scattering and rigorously fit the excitation modes to a spin wave model. The magnon spectrum is well described by an intra‐plane ferromagnetic Heisenberg exchange model with seven nearest in‐plane exchanges. This fitted exchange Hamiltonian enables theoretical predictions of CrSBr behavior: as one example, the fitted Hamiltonian is used to predict the presence of chiral magnon edge modes with a spin‐orbit enhanced CrSBr heterostructure.

2D materials↗
DOE OSTI2022

Eigenvalue-Based Micromagnetic Analysis of Switching in Spin-Torque-Driven Structures

We present an eigenvalue-based approach for studying the magnetization dynamics in magnetic nanostructures driven by spintronic excitations, such as spin-transfer torque and spin-orbit torque. The approach represents the system dynamics in terms of normal oscillation modes (eigenstates) with corresponding complex eigenfrequencies. The dynamics is driven by a small number of active eigenstates and often considering just a single eigenstate is sufficient. We develop a perturbation theory that provides semianalytical dynamic solutions by using eigenstates for the case in the absence of damping and spintronic excitations as a basis. The approach provides useful insights into dynamics in such systems and allows solving several difficulties in their modeling, such as extracting the switching current in magnetic random-access memories and understanding switching mechanisms. We show that the presented approach directly predicts the critical switching current, i.e., switching current for an infinite time. The approach also provides solutions for the switching dynamics allowing the switching current to be obtained for a finite switching time, provided that the system symmetry is broken, e.g., by tilting the polarizer, so that switching by a finite pulse is possible.

42 ENGINEERING↗
DOE OSTI2021

Stimulated Nucleation of Skyrmions in a Centrosymmetric Magnet

Understanding the dynamics of skyrmion nucleation and manipulation is important for applications in spintronic devices. In this contribution, the spin textures at magnetic domain-boundaries stimulated by application of in-plane magnetic fields in a centrosymmetric kagome ferromagnet, Fe 3 Sn 2 , with thickness gradient are investigated using Lorentz transmission electron microscopy. Switching of the in-plane magnetic field is shown to induce a reversible transformation from magnetic stripes to skyrmions, or vice versa, at the interface between differently oriented domains. Micromagnetic simulations combined with experiments reveal that the rotatable anisotropy and thickness dependence of the response to the external in-plane field are the critical factors for the skyrmion formation. In addition, it is shown that the helicity of skyrmions can also be controlled using this dynamic process. Finally, the results suggest that magnetic materials with rotatable anisotropy are potential skyrmionic systems and provides a different approach for nucleation and manipulation of skyrmions in spintronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Transverse barrier formation by electrical triggering of a metal-to-insulator transition

Application of an electric stimulus to a material with a metal-insulator transition can trigger a large resistance change. Resistive switching from an insulating into a metallic phase, which typically occurs by the formation of a conducting filament parallel to the current flow, is a highly active research topic. Using the magneto-optical Kerr imaging, we found that the opposite type of resistive switching, from a metal into an insulator, occurs in a reciprocal characteristic spatial pattern: the formation of an insulating barrier perpendicular to the driving current. This barrier formation leads to an unusual N-type negative differential resistance in the current-voltage characteristics. We further demonstrate that electrically inducing a transverse barrier enables a unique approach to voltage-controlled magnetism. By triggering the metal-to-insulator resistive switching in a magnetic material, local on/off control of ferromagnetism is achieved using a global voltage bias applied to the whole device.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Engineering Magnetic Anisotropy and Emergent Multidirectional Soft Ferromagnetism in Ultrathin Freestanding LaMnO 3 Films

We report the combination of small coercive fields and weak magnetic anisotropy makes soft ferromagnetic films extremely useful for nanoscale devices that need to easily switch spin directions. However, soft ferromagnets are relatively rare, particularly in ultrathin films with thicknesses of a few nanometers or less. We have synthesized large-area, high-quality, ultrathin freestanding LaMnO 3 films on Si and found unexpected soft ferromagnetism along both the in-plane and out-of-plane directions when the film thickness was reduced to 4 nm. We argue that the vanishing magnetic anisotropy between the two directions is a consequence of two coexisting magnetic easy axes in different atomic layers of the LaMnO 3 film. Spectroscopy measurements reveal a change in Mn valence from 3+ in the film interior to approximately 2+ at the surfaces where considerable hydrogen infiltration occurs due to the water dissolving process. First-principles calculations show that protonation of LaMnO 3 decreases valence and Our the Mn switches the magnetic easy axis from in-plane to out-of-plane as the Mn valence approaches 2+ from its 3+ bulk value. Our work demonstrates that ultrathin freestanding films can exhibit functional properties that are absent in homogeneous materials, concomitant with their convenient compatibility with Si-based devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Low-Profile Gate Power Supply for a SiC Phase Leg with Reduced Isolation Capacitance

Gate driver power supply (GDPS) for SiC devices needs power to 5 W as the switching frequency increases to hundreds of kHz. Resonant converters with planar magnetics demand GDPS with a lower profile. Also, the isolation capacitance (Cp) needs to be minimized for SiC devices with high dv/dt. This paper proposed a planar 5 W*2, 20 V isolated gate power supply for a SiC phase leg in the EV traction inverter. Air-core magnetics with PCB windings are applied for low profile. A single-switch resonant Class-E topology is proposed with zero-voltage switching at 6.78 MHz to minimize the magnetics footprint for a 6 pF Cp. Compared with commercial power supplies with similar power, the proposed power supply reduced the profile and Cp by more than half without sacrificing its efficiency and power density.

Li, Bo↗
DOE OSTI2023

Laser-Induced Ultrafast Demagnetization and Spin Switching (Final Report)

The information technology revolution demands bigger and faster magnetic storage devices. The funded research focuses on a new frontier - Laser-induced ultrafast all-optical spin switching (AOS), where a single laser pulse can switch spins from one direction to another permanently, without a magnetic field, on a time scale of 1-10 picoseconds, 2-3 orders of magnitude faster than the existing technology. The funded research has successfully resolved a long-standing issue in ultrafast demagnetization whether the lattice contributes to the demagnetization. We developed a high level first-principles theory and employed a massively parallel computer to pin down the details of the physical mechanisms that are inaccessible to other methods. This unique feature allows us to compute the force on each atom in both bulk and monolayer systems. We find that it is indeed true there is a nonzero force on each atom, but the idea of vibration contribution is not crucial to our basic understanding of physics. This paves the way to future experimental, theoretical and technological developments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Correlation-driven eightfold magnetic anisotropy in a two-dimensional oxide monolayer

Engineering magnetic anisotropy in two-dimensional systems has enormous scientific and technological implications. The uniaxial anisotropy universally exhibited by two-dimensional magnets has only two stable spin directions, demanding 180° spin switching between states. We demonstrate a previously unobserved eightfold anisotropy in magnetic SrRuO 3 monolayers by inducing a spin reorientation in (SrRuO 3 ) 1 /(SrTiO 3 ) N superlattices, in which the magnetic easy axis of Ru spins is transformed from uniaxial $\langle 001 \rangle$ direction ( N < 3) to eightfold $\langle 111 \rangle$ directions ( N ≥ 3). This eightfold anisotropy enables 71° and 109° spin switching in SrRuO 3 monolayers, analogous to 71° and 109° polarization switching in ferroelectric BiFeO 3 . First-principle calculations reveal that increasing the SrTiO 3 layer thickness induces an emergent correlation-driven orbital ordering, tuning spin-orbit interactions and reorienting the SrRuO 3 monolayer easy axis. Our work demonstrates that correlation effects can be exploited to substantially change spin-orbit interactions, stabilizing unprecedented properties in two-dimensional magnets and opening rich opportunities for low-power, multistate device applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Ion beam etching dependence of spin-orbit torque memory devices with switching current densities reduced by Hf interlayers

We report on the fabrication of nanoscale, three-terminal in-plane spin–orbit torque switching devices with low switching current densities. Critical parameters in the fabrication process, including the ion beam etching angle and time, were optimized to avoid fabrication defects and improve device yield. Measurements of the magnetic field and current-induced switching behavior of the tunnel junctions demonstrate a sensitivity to the nanopillar aspect ratio, which dictates the nanopillars’ anisotropy and thermal stability. Additionally, we show that the current density required for switching can be reduced and the device thermal stability increased by inserting Hf interlayers into the heterostructure. Micromagnetic simulations are generally consistent with the experimentally observed switching behavior, suggesting an increase in the interfacial perpendicular anisotropy at the CoFeB/MgO interface and the reduction in the Dzyaloshinskii–Moriya interaction at the W/CoFeB interface by the Hf interlayers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Picosecond volume expansion drives a later-time insulator–metal transition in a nano-textured Mott insulator

There is significant technological interest in developing ever faster switching between different electronic and magnetic states of matter. Manipulating properties at terahertz rates requires accessing the intrinsic timescales of both electrons and associated phonons, which is possible with short-pulse photoexcitation. However, in many Mott insulators, the electronic transition is accompanied by the nucleation and growth of percolating domains of the changed lattice structure, leading to empirical timescales dominated by slowly coarsening dynamics. Here, in this study, we use time-resolved X-ray diffraction and reflectivity measurements to show that the photoinduced insulator-to-metal transition in an epitaxially strained Mott insulating thin film occurs without observable domain formation and coarsening effects, allowing the study of the intrinsic electronic and lattice dynamics. Above a fluence threshold, the initial electronic excitation drives a fast lattice rearrangement, which is followed by a slower electronic evolution into a metastable nonequilibrium state. Microscopic model calculations based on time-dependent dynamical mean-field theory and semiclassical lattice dynamics explain the threshold behaviour and elucidate the delayed onset of the electronic phase transition. This work highlights the importance of combined electronic and structural studies in unravelling the physics of dynamic transitions and the timescales of photoinduced processes. During a photoinduced phase transition, electronic rearrangements are usually faster than lattice ones. Time-resolved measurements now show that the insulator-to-metal transition in a thin-film Mott insulator is preceded by lattice reconfiguration.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A Unified Off-Board Charging System for Integrated Wired and Wireless EV Charging

This work explores a unified off-board charger approach that enables both wired and wireless charging within a single system architecture. Instead of deploying two independent converters, the proposed configuration switches between an LLC-based operation for wired charging and an LCC-S–type operation for wireless charging by rearranging the excitation of commonly used components. With this reconfiguration, the same switch bridge, resonant elements, and magnetic coupling coils can be utilized in both modes without relying on relays or additional hardware paths. To assess the basic operation of the proposed system, PLECS circuit simulations were performed for both wired and wireless charging modes. A 3.3-kW prototype was also built, and representative experimental results for each mode confirm that the unified converter can operate properly while reducing hardware duplication.

Jo, Cheolhui [ORNL] (ORCID:0000000322692434)↗
DOE OSTI2025

Zero-bias conductance peaks at zero applied magnetic field due to stray fields from integrated micromagnets in hybrid nanowire quantum dots

Many recipes for realizing topological superconductivity rely on broken time-reversal symmetry, which is often attained by applying a substantial external magnetic field. Alternatively, using magnetic materials can offer advantages through low-field operation and design flexibility on the nanoscale. Mechanisms for lifting spin degeneracy include exchange coupling, spin-dependent scattering, spin injection – all requiring direct contact between the bulk or induced superconductor and a magnetic material. Here, we implement locally broken time-reversal symmetry through dipolar coupling from nearby micromagnets to superconductor-semiconductor hybrid nanowire devices. Josephson supercurrent is hysteretic due to micromagnets switching. At or around zero external magnetic field, we observe an extended presence of Andreev bound states near zero voltage bias. We also show a zero-bias peak plateau of a non-quantized value. Our findings largely reproduce earlier results where similar effects were presented in the context of topological superconductivity in a homogeneous wire, and attributed to more exotic time-reversal breaking mechanisms [Nat. Phys. 17, 43 (2020)]. In contrast, our stray field profiles are not designed to create Majorana modes, and our data are compatible with a straightforward interpretation in terms of trivial states in quantum dots. At the same time, the use of micromagnets in hybrid superconductor-semiconductor devices shows promise for future experiments on topological superconductivity.

Jiang, Luyao [Univ. of Pittsburgh, PA (United Stat↗
DOE OSTI2021

Observation of Defect-Assisted Magnetic Vortex Core Reversal at Ultralow Critical Velocity

The stability of structures with nontrivial topology is a subject of great interest, both from fundamental and technological perspectives. The topology of a magnetic vortex, for example, results in high stability of the vortex core polarity, which is attractive for applications. This high stability, however, greatly impedes the required deterministic polarity switching, which is typically only achieved with large magnetic fields or strong dynamic driving. Here, we show that the interaction between the vortex core and manufactured nanoscale defects in the magnetic material lowers the required driving strength for core polarity reversal by more than an order of magnitude. We excite vortex dynamics in thin permalloy disks, and map the twodimensional (2D) vortex core trajectory using 3D time-resolved Kerr microscopy. In pristine samples, we observe normal gyrotropic motion of the vortex core. After laser-induced generation of defects, however, we observe repeated vortex core reversal at much-reduced driving strength. Micromagnetic simulations reveal how local reduction of exchange coupling and saturation magnetization can create vortex core reversal sites for deterministic vortex core switching.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

3.5 kW/in3 Planar Coupled Inductor Design and Optimization for a 50 kW 3-level Four-Switch Buck-Boost (3L-FSBB) Converter

Planar magnetics design has been widely used in power electronics field because of the low profile, ease of manufacturability, and high power density. This paper first proposes a 3-level four-switch buck-boost (3L-FSBB) converter for the dc-dc applications where the zero common-mode (CM) voltage emissions, step-up and step-down are all required. With the consideration of power density, efficiency, and cost, a 15oz heavy copper coupled inductor for 3-level FSBB converter was designed and optimized with the low-cost commercial core and planar windings. According to the soft-switching quadrangle modulation for 3-L FSBB, the turns number and stacked core number are optimized first. And then, a two-board design is proposed to reduce the fringing effect and improve the thermal performance. Finally, a 75 kVA two-stage ac-dc-dc converter including a 3-level FSBB converter was built to verify the electrical design.

Cao, Yuliang↗
DOE OSTI2023

Current-induced switching of thin film α - Fe 2 O 3 devices imaged using a scanning single-spin microscope

Electrical switching of Néel order in an antiferromagnetic insulator is desirable as a basis for memory applications. Unlike electrically driven switching of ferromagnetic order via spin-orbit torques, electrical switching of antiferromagnetic order remains poorly understood. Here we investigate the low-field magnetic properties of 30-nm-thick, c-axis-oriented α-Fe 2 ⁢O 3 Hall devices using a diamond nitrogen-vacancy center scanning microscope. Using the canted moment of α-Fe 2⁢ O 3 as a magnetic handle on its Néel vector, we apply a saturating in-plane magnetic field to create a known initial state before letting the state relax in low field for magnetic imaging. Here, we repeat this procedure for different in-plane orientations of the initialization field. We find that the magnetic field images are characterized by stronger magnetic textures for fields along [$\overline{11}$20] and 11$\overline{2}$0, suggesting that despite the expected 3-fold magnetocrystalline anisotropy, our α-Fe 2 ⁢O 3 thin films have an overall in-plane uniaxial anisotropy. We also study current-induced switching of the magnetic order in α-Fe 2 ⁢O 3 . We find that the fraction of the device that switches depends on the current pulse duration, amplitude, and direction relative to the initialization field.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Unidirectional multipulse helicity-independent all-optical switching in [Ni/Pt] based synthetic ferrimagnets

Nickel-platinum-based synthetic ferrimagnets (SFi's) are highly tunable and rare-earth-free materials that allow ultrafast all optical control of magnetism to be explored. This study considers a SFi composed of a ferromagnetic [Ni/Pt] multilayer and a ferromagnetic Co layer, separated by an Ir layer that mediates an antiferromagnetic coupling. Helicity-independent all optical switching (HI-AOS) between two antiparallel magnetization states is observed. AOS may be realized at increased temperature through reduction of the thickness of the Pt layers. Switching is unidirectional and has a strong dependence on the applied magnetic field history, which suggests the possible presence of a nanoscale magnetic texture that may be important in controlling AOS in SFi systems. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Robust and symmetric magnetic field dependency of superconducting diode effect in asymmetric Dirac semimetal SQUIDs

The recent demonstration of the superconducting diode effect (SDE) has generated renewed interest in superconducting electronics, in which devices such as compact superconducting diodes that can perform signal rectification with low-energy operations are needed. In this article, we present our results of robust and symmetric-in-magnetic-field SDE in asymmetric superconducting quantum interference devices (SQUIDs) realized in high-quality Dirac semimetal Cd 3 As 2 thin film grown by the molecular beam epitaxy technique. Consistent with previous work, a zero magnetic field SDE is observed. Furthermore, the difference in switching current is independent of the strength and polarity of an out-plane magnetic field in the range of −10 and 10 mT. We speculate that this robust symmetric-in-field SDE in our Dirac semimetal SQUIDs is due to the formation of helical spin texture, theoretically predicted in Dirac semimetals.

Current-voltage characteristic↗