SEARCH · Engineering Papers

Results for “MEDIUM PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Evolution of radiative thermal instability in a confined medium

Thermally bistable fluid tends to self-organize into clouds of hot and cold material, which are internally uniform and separated by thin conduction fronts. The evolution of these clouds has been studied for isobaric systems, but when pressure is instead treated as a dynamical quantity and allowed to evolve self-consistently, fundamentally different dynamics appear. Such a treatment is necessary in some laboratory plasmas, whose volume is constrained but whose pressure can vary. Here, solutions are derived for the evolution of clouds, accounting for pressure variation and interactions between conduction fronts. Additional stable configurations and secondary instabilities are derived, which may be relevant to fusion plasmas and to the study of photoionized plasma in the laboratory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Figuring Out Gas & Galaxies in Enzo (FOGGIE). VI. The Circumgalactic Medium of L * Galaxies Is Supported in an Emergent, Nonhydrostatic Equilibrium

The circumgalactic medium (CGM) is often assumed to exist in or near hydrostatic equilibrium, with the regulation of accretion and the effects of feedback treated as perturbations to a stable balance between gravity and thermal pressure. We investigate global hydrostatic equilibrium in the CGM using four highly resolved L* galaxies from the Figuring Out Gas & Galaxies in Enzo (FOGGIE) project. The FOGGIE simulations were specifically targeted at fine spatial and mass resolution in the CGM (Δx ≲ 1 kpc h –1 and M ≃ 200M ⊙ ). We develop a new analysis framework that calculates the forces provided by thermal pressure gradients, turbulent pressure gradients, ram pressure gradients of large-scale radial bulk flows, centrifugal rotation, and gravity acting on the gas in the CGM. Thermal and turbulent pressure gradients vary strongly on scales of ≲5 kpc throughout the CGM. Thermal pressure gradients provide the main supporting force only beyond ~0.25R 200 , or ~50 kpc at z = 0. Within ~0.25R 200 , turbulent pressure gradients and rotational support provide stronger forces than thermal pressure. More generally, we find that global equilibrium models are neither appropriate nor predictive for the small scales probed by absorption line observations of the CGM. Local conditions generally cannot be derived by assuming a global equilibrium, but an emergent global equilibrium balancing radially inward and outward forces is obtained when averaging over the nonequilibrium local conditions on large scales in space and time. Approximate hydrostatic equilibrium holds only at large distances from galaxies, even when averaging out small-scale variations.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2019

Characteristics of Shock-Induced Dust Flux from the Surface of Lead and Copper Samples under Pressure in the Shock Wave of 45–50 GPa with Unloading into Vacuum

The results of experimental studies of the shock-induced particle ejection (“dusting”) from a free rough (R{sub z} = 20) surface of lead and copper samples into an evacuated medium are presented. The experimental methods were based on different physical principles. To determine the size of particles by shadow laser-optical imaging more efficiently, a narrow strip was isolated in the center of the free surface of a sample from which an optically transparent stream of particles was ejected. The rest of the surface, substantially larger in size, ejected particles, parameters of which were reliably recorded using optical heterodyne interferometry detection, radiographic imaging, and piezoelectric techniques. This made it possible to obtain more reliable data on the particle size distribution, the velocity of the front of a particle flux, and the density (weight) distribution of the flow in the direction of its motion, necessary to refine the existing models and create more reliable models to describe the phenomenon. Using lead and copper samples, the material of which melts or does not melt under shock wave loading in selected close conditions (amplitude of the shock wave and roughness of the free surface), made it possible to clearly demonstrate the effect of melting on the qualitative pattern and quantitative characteristics of the shock-induced dusting process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

A simple model of a strong shock driven by a spherical or cylindrical piston

A simple model of piston-driven spherical and cylindrical shocks is suggested. The model is based on a consistent use of two factors: (a) an almost uniform pressure across the shocked layer and, (b) continuous geometrical stretching of the surface elements of the expanding piston. It turns out that for a uniform pre-shock medium the gas between the piston and the shock behaves essentially as an incompressible fluid. An algebraic equation for the shock vs piston position is obtained. Detailed evaluation of the accuracy of the proposed solution shows that its accuracy is a few percent for the adiabatic index γ = 5/3 (as in ideal plasma). A closed-form solution describing enhancement of a weak ambient magnetic field by the shock is presented. The proposed model of piston-driven shocks goes beyond the classical self-similar solutions in that it: (1) naturally covers an early, non-asymptotic dynamics and its transition to asymptotic regime; (2) allows for smooth radial density variation of an ambient gas of the form of bumps, dimples or ramps between two constant values; and (3) allows for smooth temporal variation of piston velocity of the form of bumps, dimples, or ramps. Furthermore, this simple and versatile model provides some new insights into a classical hydrodynamical problem.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

Reverse battery model for anodic arc discharges near atmospheric pressure

In this study, the macroscopic electrical parameters of anodic arc discharges performed with solid carbon and molybdenum anodes are described in terms of an equivalent circuit. The proposed 1D model shows that the plasma volume behaves as a dissipative medium combined with self-generated voltage from the plasma sheaths. We test this model by fitting virtual circuits of resistors and batteries to the measured voltage–current (V–I) characteristics representative of atmospheric arc processes (300 and 500 Torr He), resulting in the identification of two phenomena relevant for arc technology. First, steady DC arc experiments show that a minimal arc voltage (V ≈ 20–30 V) or threshold voltage is necessary to keep the plasma arc on. Second, we prove that pulsed arc discharges excited with rectangular current waveforms (1–5 Hz) are never extinguished but remain ignited during the inactive time of the pulse as long as the aforementioned threshold voltage is maintained. In summary, an atmospheric anodic arc discharge with solid electrodes consumes electrical power as a voltage source opposed to the external voltage supply together with a resistor that accounts for the plasma impedance. This approach permits us to estimate basic plasma parameters from simple electrical diagnostics, as well as to predict how power consumption is distributed within an anodic arc and to understand dynamics of arc plasmas excited by periodic signals.

25 ENERGY STORAGE↗

DOE OSTI2021

Evaluation of Safety Standards for Fuel System and Fuel Container Integrity of Alternative Fuel Vehicles

There are two Federal Motor Vehicle Safety Standards (FMVSS) in place that specify requirements for integrity of the fuel system and fuel container on compressed natural gas (CNG) fuel vehicles. These are FMVSS Nos. 303, “Fuel system integrity of compressed natural gas vehicles,” and FMVSS No. 304, “CNG fuel container integrity.” At this time, no FMVSS are defined for the fuel system and fuel container integrity of propane and liquefied natural gas (LNG) vehicles or fuel system integrity requirements for heavy-duty CNG vehicles on the road. However, there are voluntary industry design standards and best practices, as well as regulations defined in other countries. FMVSS No. 303 specifies requirements for the integrity of the CNG fuel system of light-duty vehicles and school buses, and FMVSS No. 304 specifies requirements for fuel container integrity on all CNG vehicles. FMVSS No. 304 applies to containers used for vehicle propulsion, whereas containers used to transport CNG and transportation of CNG containers are regulated by the DOT Pipeline and Hazardous Materials Safety Administration. FMVSS Nos. 303 and 304 are performance-based standards to consistently test and validate equipment and are not design restrictive. Despite the increasing number of natural gas and propane medium- and heavy-duty vehicles on the road, there are no FMVSS fuel system integrity requirements beyond light-duty and school buses for CNG vehicles and no FMVSS fuel system integrity requirements for propane vehicles. NHTSA is researching fuel system safety for medium- and heavy-duty natural gas and propane vehicles to update FMVSS Nos. 303 and 304. NHTSA is also researching current best practices and standards for high pressure fuel tanks in motor vehicles as they may apply to FMVSS No. 304.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2022

The CO Emission in the Taffy Galaxies (UGC 12914/15) at 60 pc Resolution. I. The Battle for Star Formation in the Turbulent Taffy Bridge

We present Atacama Large Millimeter/submillimeter Array observations at a spatial resolution of $0^{"}_{.}2$ (60 pc) of CO emission from the Taffy galaxies (UGC 12914/5). The observations are compared with narrowband Paα, mid-IR, radio continuum and X-ray imaging, plus optical spectroscopy. The galaxies have undergone a recent head-on collision, creating a massive gaseous bridge that is known to be highly turbulent. The bridge contains a complex web of narrow molecular filaments and clumps. The majority of the filaments are devoid of star formation, and fall significantly below the Kennicutt–Schmidt relationship for normal galaxies, especially for the numerous regions undetected in Paα emission. Within the loosely connected filaments and clumps of gas we find regions of high velocity dispersion that appear gravitationally unbound for a wide range of likely values of X CO . Like the "Firecracker" region in the Antennae system, they would require extremely high external dynamical or thermal pressure to stop them dissipating rapidly on short crossing timescales of 2–5 Myr. We suggest that the clouds may be transient structures within a highly turbulent multiphase medium that is strongly suppressing star formation. Despite the overall turbulence in the system, stars seem to have formed in compact hotspots within a kiloparsec-sized extragalactic H ii region, where the molecular gas has a lower velocity dispersion than elsewhere, and shows evidence for a collision with an ionized gas cloud. Like the shocked gas in the Stephan's Quintet group, the conditions in the Taffy bridge shows how difficult it is to form stars within a turbulent, multiphase, gas.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Implementation of fuel management multi-cycle optimization capabilities in RAVEN optimization framework

Optimization in nuclear fuel-management assists the core reload engineer with finding optimal out-of-core and in-core strategies. RAVEN is INL’s open source software that is equipped with fuel-management optimization capabilities including single-cycle, single- and multi-objective optimization of pressurized water reactors (PWRs) loading patterns (LP) of a fresh core using genetic algorithm (GA) and non-dominated sorting genetic algorithm (NSGA-II). In practice, however, medium and long term planning of fuel-management needs a multi-cycle approach, where the history and availability of fuel assemblies is considered in the optimization process. In this paper, we present a description of an initial expansion of RAVEN fuel-management optimization capabilities for a multi-cycle optimization framework. N-th cycle optimization capabilities that account for the unique history of recycled fuel assembly in the core were added. The multi-cycle optimization approach taken is formulated as a cycle-wise optimization problem where out-of-core decisions are used to onset each cycle optimization. Out-of-core decisions are managed externally to the in-core optimization by a fuel inventory management module. A proof-of-concept optimization problem is also presented.

42 - ENGINEERING↗

DOE OSTI2021

Pore-scale simulation of drying in porous media using a hybrid lattice Boltzmann: pore network model

In this work, a hybrid method coupling a pseudo-potential lattice Boltzmann model (LBM) and a pore network model (PNM) to simulate drying in porous media is proposed. Based on the watershed method, the porous medium is firstly decomposed into pore regions. According to the liquid–vapor phase distribution at a given time, the pore regions are further divided into four pore types, namely two-phase pores where a liquid–vapor interface exists, buffer pores next to the two-phase pores, single-liquid and single-vapor phase pores. The pseudo-potential LBM is used in the two-phase and buffer pores to simulate liquid drying and track the movement of the interfaces, while the single-phase PNM simulations are conducted in the buffer and single-phase pores to simulate vapor or liquid flow. LBM and PNM are coupled in the buffer pores through exchange of boundary information. The hybrid method is applied to simulate liquid drying in a porous medium. The whole-domain LBM simulation is considered as the reference solution to validate the hybrid method. Liquid saturation variation during the drying process and detailed phase and pressure distributions obtained by the two methods match quite well, demonstrating the accuracy of the hybrid method. For the specific case studied, the hybrid method saves more than 60% computational time compared to the whole-domain LBM simulation. In addition, the speedup of the hybrid method becomes more significant for a larger computational domain. In summary, the hybrid method developed in this work combines the accuracy of LBM and the efficiency of PNM to simulate drying in porous media at pore scale and can lead to significant reduction of computation time, thus allowing the pore-scale consideration of drying in larger porous systems.

36 MATERIALS SCIENCE↗

DOE OSTI2025

High gas-pressure apparatus for nonlinear X-ray propagation and reshaping via stimulated X-ray Raman scattering

Abstract We describe an experimental setup for non-linear interaction and propagation of ultrashort and intense x-ray free-electron laser (XFEL) pulses in a dense gas. It allows one to provide high, but adjustable, target-gas pressures of up to 6 bar within a vacuum environment of 3∙10 − 3 mbar or better. The setup enables investigation of intense x-ray propagation in an optically thick medium with minimal absorption loss of the unfocused beam outside of the target. As an application, we demonstrate the amplification of spectrally-resolved stimulated x-ray Raman scattering (SXRS) in dense neon gas, where the most intense inner part of the beam is almost completely absorbed. As a result, in the inner part of the beam, the SXRS signal exceeds the residual XFEL pulse by a factor of around two. In principle, this reshaping effect allows for a spatial separation of the two spectral components, i.e., the driving pulse and the SXRS signal.

Magunia, Alexander↗

DOE OSTI2023

Micromovements and discomfort associated with flight mission with helmet operation tasks with different levels of cognitive workload

When performing stationary tasks under elevated cognitive workload, individuals must perform continual muscle contractions to maintain stability of the body, resulting in fatigue of the postural muscles. When the muscles perform these contractions in a prolonged manner, the body potentially responds through small changes in body movements—micromovements that may lead to discomfort. The study purpose was to evaluate impact of cognitive load on micromovements. The micromovements were measured during three different cognitive workloads; low, medium, and high. The NASA-TLX score was used to evaluate the perceived mental workload and discomfort was assessed by visual analog scale. In total, 60 subjects (30 males and 30 females) were recruited and performed cognitive tasks that simulated flight operations such as changing the radio frequency based on air traffic control messages, balancing the fuel levels in simulated fuel tanks, and aiming a reticle in a designated moving target using the cyclic control. Cognitive load was defined by the frequency of events. Micromovements were defined by changes in the center of pressure (COP) of the seat pan and COP standard deviation. It was found that the high cognitive workloads had the highest NASA-TLX scores including mental demands, temporal demands, and effort. The neck area had the highest overall levels of discomfort followed by upper back. The highest standard deviation for COP shift and number of micromovements occurred for medium cognitive workloads. In conclusion, while there were some interesting trends, few trends reached a statistical significance due to high variability among subjects for the outcome variables.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

Pore-scale simulation of gas flow in microscopic permeable media with complex geometries

Lattice Boltzmann method (LBM) is an efficient tool to perform direct numerical simulation of gas flow in micro-size pores. Despite great advances in LBM and its use in describing gas flow in micro-size channels in slip and transitional flow regimes, exploring formulations that are able to capture flow behavior in domains with complex boundary geometries remains a challenging task. As a result, the impact of complexities in pore structures on gas flow may not be fully explored using LBM. In this study, we propose to use the combined bounce-back and Maxwellian diffusive reflection scheme to capture the slip velocity with a new set of slip coefficients. Optimal values of slip coefficients are determined using a gradient based method, where the results from the linearized Boltzmann equation is used as the reference solution. The proposed formulation is further validated against predictions from molecular dynamics simulation in the presence of complex geometries by introducing obstacles of different shapes in straight channels. LBM with the proposed boundary treatment is then used to investigate gas flow in a synthetic microscopic permeable medium. Here, results indicate that gas exhibits different flow configurations as Knudsen number varies, and apparent gas permeability appears to have up to a second-order dependency on the reciprocal mean pressure in slip and transitional flow regimes.

03 NATURAL GAS↗

DOE OSTI2021

Screening of Lost Circulation Materials for Geothermal Applications: Experimental Study at High Temperature

Abstract This study presents a laboratory experimental research to determine the characteristics of lost circulation materials (LCMs) capable of addressing thermal degradation, providing bridging and sealing in geothermal conditions. Eleven different materials were tested: Walnut Fine, Walnut Medium, Sawdust, Altavert, Graphite Blend, Bentonite Chips, Micronized Cellulose (MICRO-C), Magma Fiber Fine, diatomaceous earth/amorphous silica powder (DEASP), Cotton Seed Hulls, and a Calcium Carbonate Blend. The filtration and sealing pressure of the LCMs were measured with HPHT equipment up to 149 °C (300 °F). Besides, the particle size distribution (PSD) of fine granular materials was measured. The results show that the performance of some LCM materials commonly used in geothermal operations is affected by high temperature. Characteristics such as shape and size made some materials more prone to thermal degradation. Also, it was found that the PSD of LCMs is a key factor in the effectiveness of bridging and sealing fractures. The results suggest that granular materials with a wide particle size distribution PSD are suitable for geothermal applications.

Energy & Fuels↗

DOE OSTI2023

Physics-based Induced Earthquake Forecasting: Process Understanding, and Hazards Mitigation

Disposal of saltwater co-produced with oil and gas is linked to elevated seismicity in the Central and Midwest US. There is a concern that these events may lead to widespread damage and an overall increase in seismicity. Thus an improved understanding of the spatially and temporally variable deformation and stress field associated with fluid injection operation is critically necessary for evaluating time-varying seismic hazards. Despite the improvements in seismic monitoring capacity and the resulting decrease in the magnitude detection threshold, estimates of induced earthquake probability remain elusive due to insufficient models incapable of accounting for the complex physics governing the process of induced seismicity. The proposed research effort will comprehensively analyze, integrate, and interpret geodetic, injection, and seismic data in the vicinity of the injection sites in Oklahoma to resolve the 4-dimensional distribution of pore pressure and stress in the shallow crust. This project, in particular, is focused on exploring the statistical relation between injection operation and increased earthquake hazard. The amplitude of and the extent to which pore pressure changes are determined by some factors, in particular, the hydrogeological properties of the rocks, such as diffusivity. Thus the available deformation data will be used to constrain hydrogeological properties of the medium, to accurately resolve the evolution of crustal stresses due to fluid injection. Having the time-varying models of stress changes, a statistical framework will be implemented to estimate the time-dependent probability of large earthquakes on the nearby fault systems. These data and models help to improve seismic hazard estimates and aid in constructing operational-induced earthquake forecast models. This information can also be integrated into the updated U.S. National Seismic Hazard Map, which local communities and authorities use in their earthquake risk estimates and mitigation efforts.

58 GEOSCIENCES↗

DOE OSTI2022

A Hydro-particle-mesh Code for Efficient and Rapid Simulations of the Intracluster Medium

We introduce the cosmological HYPER code based on an innovative hydro-particle-mesh (HPM) algorithm for efficient and rapid simulations of gas and dark matter. For the HPM algorithm, we update the approach of Gnedin & Hui to expand the scope of its application from the lower-density intergalactic medium (IGM) to the higher-density intracluster medium (ICM). While the original algorithm tracks only one effective particle species, the updated version separately tracks the gas and dark matter particles, as they do not exactly trace each other on small scales. For the approximate hydrodynamics solver, the pressure term in the gas equations of motion is calculated using robust physical models. In particular, we use a dark matter halo model, ICM pressure profile, and IGM temperature–density relation, all of which can be systematically varied for parameter-space studies. We show that the HYPER simulation results are in good agreement with the halo model expectations for the density, temperature, and pressure radial profiles. Simulated galaxy cluster scaling relations for Sunyaev–Zel’dovich (SZ) and X-ray observables are also in good agreement with mean predictions, with scatter comparable to that found in hydrodynamic simulations. HYPER also produces lightcone catalogs of dark matter halos and full-sky tomographic maps of the lensing convergence, SZ effect, and X-ray emission. These simulation products are useful for testing data analysis pipelines, generating training data for machine learning, understanding selection and systematic effects, and for interpreting astrophysical and cosmological constraints.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Evaluation of lithium as a tritium storage medium for betavoltaics

Lithium foils were demonstrated to absorb surrogate protium for tritium-powered betavoltaics. 20μm thick lithium foils were hole-punched from a ribbon of electrodeposited lithium on copper foil. The lithium foils were loaded with hydrogen in a custom Sievert apparatus where the pressure drop showed full hydriding at a hydrogen pressure of 2 bar and at all loading temperatures above the lithium melting point at 190, 200, 225, 250, and 300. Lithium hydride formation was confirmed with Raman spectroscopy after hydrogen loading. The kinetics of experimental hydride formation was compared to the diffusion-limited Mintz–Bloch model. While the Mintz–Bloch model showed good fit with the experimental loadings, the model overpredicted the loading kinetics starting at 250 °C and at higher temperatures. In conclusion, The overprediction was either caused by lithium hydride outgassing due to some reduction with some residual lithium hydroxide created from brief air exposure when sealing the lithium in the reactor or a transition from diffusion-limited hydride growth to surface or metal–hydride interface-limited hydride growth.

25 ENERGY STORAGE↗

DOE OSTI2024

Quantification of the Crack Evolution Process by Extracting Relevant Signal Components from Wave Propagation and Diffusive Transport Front Measurements

Wave propagation and diffusive transport phenomena in a geological rock sample undergoing crack evolution process are expected to interact with the mechanical discontinuities in the medium. The measurements of the signals associated with these phenomena can be used to assess and monitor the crack-driven micromechanical alterations in the rock. Different wave/diffusion phenomena, such as sonic propagation, pressure diffusion, and acoustic emission (AE), are sensitive to different elements of the mechanical discontinuities generated during the evolution of the crack clusters from initiation to coalescence. Sonic propagation, AE, and pressure diffusion monitoring have the potential to map the crack evolution because the transmitter-receiver arrays can be designed, arranged and tuned to (1) achieve maximum recovery of the scattered waveforms and travel times, (2) capture the later arrivals and multiple reflections, and (3) illuminate large rock volume. However, the structural/topological complexities of the mechanical discontinuities, complex distribution of the stress fields, complex mechanical alterations in media, and fluid redistribution in the crack system pose serious challenges for the detection and modeling of the crack evolution process (from here on, we will use the term ‘crack evolution process’ to mean that the crack evolution occurred under shallow crustal conditions). For purposes of accurately accounting such complexities and heterogeneities in the absence of reliable physical laws, simulation methods, and signal processing techniques, my early-career research proposal will develop and apply novel data-driven machine learning methods to: (1) extract signal components relevant to the various phases of crack evolution and (2) generate a 2D visual map of the crack evolution process.

58 GEOSCIENCES↗

DOE OSTI2025

Experimental observation of nonlinear relation between pressure and water flux is consistent with the solution-diffusion model

In several recent studies, it has been proposed that the fundamental understanding of penetrant transport in dense polymer membranes occurring via the solution-diffusion model, which has been the generally accepted theoretical framework for describing penetrant transport in such materials for the past several decades, is flawed. An alternate mechanistic framework based on the idea of two-phase flow in a porous medium (i.e., pore-flow) has been broadly advanced instead, with proponents of this approach claiming that the pore-flow theoretical framework provides the necessary mechanistic insight to design novel polymeric membrane materials for emerging applications. In this study, we show experimental results for hydraulic permeation of water that are entirely consistent with the solution-diffusion theory, without modification, for three dense polymeric membranes: crosslinked poly(ethylene glycol diacrylate) (XLPEGDA), Nafion 117 ionomer in the sodium counterion form (Nafion 117-Na), and cellulose acetate (CA). By measuring water flux at transmembrane pressures up to 240 bar, we observe a nonlinear relationship between the transmembrane pressure (TMP) and water flux, J w , for XLPEGDA and Nafion 117-Na, while this relationship is linear for CA. We demonstrate that the behavior of these three materials is described via the solution-diffusion model. According to the solution-diffusion model, flux is, to a good approximation, proportional to the transmembrane concentration difference induced by the pressure difference across the membrane, rather than to TMP itself. Water sorption isotherms are reported for all three materials. They further justify the nonlinear relationship between TMP and J w observed in XLPEGDA and Nafion 117-Na, emphasizing that the nonlinearity in the flux/TMP relationship stems from nonlinearities in the sorption isotherm with pressure. Additionally, the relationship between water flux and TMP can be predicted, a priori, with no adjustable parameters when a predictive model for the diffusion coefficient of water is employed in conjunction with the experimental water sorption isotherms in the solution-diffusion model. Furthermore, our results demonstrate the validity of the solution-diffusion model to describe transport of penetrants in dense polymer membranes, while highlighting the sensitivity of the solution-diffusion model to the many physical and mathematical simplifications commonly applied to the theory in literature.

materials↗