Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Large Eddy Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Intercomparison of Large-Eddy Simulations of Arctic Mixed-Phase Clouds: Importance of Ice Size Distribution Assumptions

Large-eddy simulations of mixed-phase Arctic clouds by 11 different models are analyzed with the goal of improving understanding and model representation of processes controlling the evolution of these clouds. In a case based on observations from the Indirect and Semi-Direct Aerosol Campaign (ISDAC), it is found that ice number concentration, Ni, exerts significant influence on the cloud structure. Increasing Ni leads to a substantial reduction in liquid water path (LWP), in agreement with earlier studies. In contrast to previous intercomparison studies, all models here use the same ice particle properties (i.e., mass-size, mass-fall speed, and mass-capacitance relationships) and a common radiation parameterization. The constrained setup exposes the importance of ice particle size distributions (PSDs) in influencing cloud evolution. A clear separation in LWP and IWP predicted by models with bin and bulk microphysical treatments is documented and attributed primarily to the assumed shape of ice PSD used in bulk schemes. Compared to the bin schemes that explicitly predict the PSD, schemes assuming exponential ice PSD underestimate ice growth by vapor deposition and overestimate mass-weighted fall speed leading to an underprediction of IWP by a factor of two in the considered case. Sensitivity tests indicate LWP and IWP are much closer to the bin model simulations when a modified shape factor which is similar to that predicted by bin model simulation is used in bulk scheme. These results demonstrate the importance of representation of ice PSD in determining the partitioning of liquid and ice and the longevity of mixed-phase clouds.

clouds↗

Evaluation of Subgrid-Scale Models for Large Eddy Simulation of Compressible Flows

The objective of this project was to evaluate and develop subgrid-scale (SGS) turbulence models for large eddy simulations (LES) of compressible flows. During the first phase of the project results from LES using the dynamic SGS model were compared to those of direct numerical simulations (DNS) of compressible homogeneous turbulence. The second phase of the project involved implementing the dynamic SGS model in a NASA code for simulating supersonic flow over a flat-plate. The model has been successfully coded and a series of simulations has been completed. One of the major findings of the work is that numerical errors associated with the finite differencing scheme used in the code can overwhelm the SGS model and adversely affect the LES results. Attached to this overview are three submitted papers: 'Evaluation of the Dynamic Model for Simulations of Compressible Decaying Isotropic Turbulence'; 'The effect of the formulation of nonlinear terms on aliasing errors in spectral methods'; and 'Large-Eddy Simulation of a Spatially Evolving Compressible Boundary Layer Flow'.

Blaisdell, Gregory A.↗

Investigation of thermal hydraulic behavior of the High Temperature Test Facility's lower plenum via large eddy simulation

A high-fidelity computational fluid dynamics (CFD) analysis was performed using the Large Eddy Simulation (LES) model for the lower plenum of the High–Temperature Test Facility (HTTF), a ¼ scale test facility of the modular high temperature gas-cooled reactor (MHTGR) managed by Oregon State University. In most next–generation nuclear reactors, thermal stress due to thermal striping is one of the risks to be curiously considered. This is also true for HTGRs, especially since the exhaust helium gas temperature is high. In order to evaluate these risks and performance, organizations in the United States led by the OECD NEA are conducting a thermal hydraulic code benchmark for HTGR, and the test facility used for this benchmark is HTTF. HTTF can perform experiments in both normal and accident situations and provide high-quality experimental data. However, it is difficult to provide sufficient data for benchmarking through experiments, and there is a problem with the reliability of CFD analysis results based on Reynolds–averaged Navier–Stokes to analyze thermal hydraulic behavior without verification. To solve this problem, high-fidelity 3-D CFD analysis was performed using the LES model for HTTF. It was also verified that the LES model can properly simulate this jet mixing phenomenon via a unit cell test that provides experimental information. As a result of CFD analysis, the lower the dependency of the sub-grid scale model, the closer to the actual analysis result. In the case of unit cell test CFD analysis and HTTF CFD analysis, the volume-averaged sub-grid scale model dependency was calculated to be 13.0% and 9.16%, respectively. As a result of HTTF analysis, quantitative data of the fluid inside the HTTF lower plenum was provided in this paper. As a result of qualitative analysis, the temperature was highest at the center of the lower plenum, while the temperature fluctuation was highest near the edge of the lower plenum wall. The power spectral density of temperature was analyzed via fast Fourier transform (FFT) for specific points on the center and side of the lower plenum. FFT results did not reveal specific frequency-dominant temperature fluctuations in the center part. It was confirmed that the temperature power spectral density (PSD) at the top increased from the center to the wake. The vortex was visualized using the well-known scalar Q-criterion, and as a result, the closer to the outlet duct, the greater the influence of the mainstream, so that the inflow jet vortex was dissipated and mixed at the top of the lower plenum. Additionally, FFT analysis was performed on the support structure near the corner of the lower plenum with large temperature fluctuations, and as a result, it was confirmed that the temperature fluctuation of the flow did not have a significant effect near the corner wall. In addition, the vortices generated from the lower plenum to the outlet duct were identified in this paper. It is considered that the quantitative and qualitative results presented in this paper will serve as reference data for the benchmark.

97 MATHEMATICS AND COMPUTING↗

Use of Cloud Radar Doppler Spectra to Evaluate Stratocumulus Drizzle Size Distributions in Large-Eddy Simulations with Size-Resolved Microphysics

Abstract A case study of persistent stratocumulus over the Azores is simulated using two independent large-eddy simulation (LES) models with bin microphysics, and forward-simulated cloud radar Doppler moments and spectra are compared with observations. Neither model is able to reproduce the monotonic increase of downward mean Doppler velocity with increasing reflectivity that is observed under a variety of conditions, but for differing reasons. To a varying degree, both models also exhibit a tendency to produce too many of the largest droplets, leading to excessive skewness in Doppler velocity distributions, especially below cloud base. Excessive skewness appears to be associated with an insufficiently sharp reduction in droplet number concentration at diameters larger than ~200 μm, where a pronounced shoulder is found for in situ observations and a sharp reduction in reflectivity size distribution is associated with relatively narrow observed Doppler spectra. Effectively using LES with bin microphysics to study drizzle formation and evolution in cloud Doppler radar data evidently requires reducing numerical diffusivity in the treatment of the stochastic collection equation; if that is accomplished sufficiently to reproduce typical spectra, progress toward understanding drizzle processes is likely.

54 ENVIRONMENTAL SCIENCES↗

Development of a Time-Height Profile Assimilation Technique for Large-Eddy Simulation

Mesoscale-to-microscale coupling (MMC) aims to address the limited scope of traditional large-eddy simulations by driving the microscale flow with information concerning large-scale weather patterns provided by mesoscale models. We present a new offline MMC technique for horizontally homogeneous microscale flow conditions, in which internal forcing terms are computed based on mesoscale time–height profiles of mean-flow quantities. The advantage of such an approach is that it can be used to drive a microscale simulation with either mesoscale or observational data, and that it does not rely on specific terms in the mesoscale budget equations, which are typically not part of the default output of a mesoscale solver. The performance of the proposed profile assimilation technique is assessed based on the simulation of a typical diurnal cycle over the Scaled Wind Farm Technology site in west Texas. Results indicate that simple data assimilation techniques lead to unphysically high levels of shear and turbulence caused by the algorithm’s inability to cope with inaccuracies in the mesoscale time–height profiles. Modifying the algorithm to account for vertical coherence in the mesoscale source terms gives the microscale solver a greater ability to correct the provided mesoscale time–height profiles, leading to improved predictions of shear and turbulence statistics. The resulting turbulence statistics are in good agreement with meteorological tower observations and simulation results obtained with state-of-the-art coupling techniques using mesoscale budget components.

data assimilation↗

Eulerian and Lagrangian Parameterization of the Oceanic Mixed Layer using Large Eddy Simulation and MPAS-Ocean

We have conducted a suite of Large Eddy Simulation (LES) to form the basis of a multi-model comparison (left). The results have led to proposed model improvements. We have verified that Eulerian-Lagrangian effective diffusivity estimates of mesoscale mixing are consistent with traditional particle statistics metrics (right). LES and Lagrangian particles will be utilized to better represent the movement of water into and out of the mixed layer.

58 GEOSCIENCES↗

A petascale direct numerical simulation study of the modelling of flame wrinkling for large-eddy simulations in intense turbulence

A new set of petascale direct numerical simulations (DNS) modelling lean hydrogen combustion with detailed chemistry in a temporally evolving slot-jet configuration is presented as a database for the development and validation of models for premixed turbulent combustion. The jet Reynolds number is 10,000, requiring grid numbers up to nearly seven billion, which was achieved by computation on 120,000 processor cores. In contrast to many prior DNS studies, a mean shear exists that drives strong turbulent mixing within the flame structure. Three cases are simulated with different Damköhler numbers, while Reynolds number is held fixed. Basic statistics are presented showing that integrated burning rates up to approximately six times the laminar burning rate are obtained. It is shown that increased flame surface area accounts for most of the enhanced burning while increases in the burning rate per unit area also play an important contribution. The database is then used to assess a new model of flame wrinkling intended for large-eddy simulations (LES). The approach draws on concepts from fractal geometry, requiring the modelling of an inner cut-off scale representing the smallest scale of flame wrinkling, and the fractal dimension controlling the resolution dependence of the unresolved flame surface area. In contrast to previous modelling, it is argued that the inner cut-off should be filter-size invariant in an inertial range. Then, dimensional and physical reasoning together with Damköhler’s limiting scaling laws for the turbulent flame speed are used to infer the cut-off and fractal dimension in limiting regimes. Two methods of determining the fractal dimension are proposed: a static, algebraic expression or a dynamic approach exploiting a Germano-type identity. Finally the model is compared against the DNS in a priori tests and is found to give excellent results, quantitatively capturing the trends with time, space, filter size and Damköhler number.

Energy & Fuels↗

Large-Eddy Simulation of an n-Dodecane Spray Flame Under Different Ambient Oxygen Conditions

An n-dodecane spray flame was simulated using a dynamic structure large eddy simulation (LES) model coupled with a detailed chemistry combustion model to understand the ignition processes and the quasi-steady state flame structures. This study focuses on the effect of different ambient oxygen concentrations, 13%, 15% and 21% at an ambient temperature of 900 K and an ambient density of 22.8 kg/m3, which are typical diesel-engine relevant conditions with different levels of exhaust gas recirculation (EGR). The liquid spray was treated with a traditional Lagrangian method. A 103-species skeletal mechanism was used for the n-dodecane chemical kinetic model. It is observed that the main ignitions occur in rich mixture and the flames are thickened around 35 to 40 mm off the spray axis due to the enhanced turbulence induced by the strong recirculation upstream, just behind the head of the flames at different oxygen concentrations. At 1 ms after the start of injection, the soot production is dominated by the broader region of high temperature in rich mixture instead of the stronger oxidation of the high peak temperature. Multiple realizations were performed for the 15% O2 condition to understand the realization to realization variation and to establish best practices for ensembleaveraging diesel spray flames. Two indexes are defined. The structure-similarity index analysis suggests at least 5 realizations are needed to obtain 99% similarity for mixture fraction if the average of 16 realizations are used as the target at 0.8 ms. However, this scenario may be different for different scalars of interest. It is found that 6 realizations would be enough to reach 99% of similarity for temperature, while 8 and 14 realizations are required to achieve 99% similarity for soot and OH mass fraction, respectively. Similar findings are noticed at 1 ms. More realizations are needed for the magnitude-similarity index for the similar level of similarity as the structure-similarity index

Pei, Yuanjiang↗

Large Eddy Simulation of an n-Dodecane Spray Flame Under Different Ambient Oxygen Conditions

An n-dodecane spray flame was simulated using a dynamic structure large eddy simulation (LES) model coupled with a detailed chemistry combustion model to understand the ignition processes and the quasi-steady state flame structure at different ambient oxygen concentrations, 13\%, 15\% and 21\% at ambient temperature of 900 K and ambient density of 22.8 kg/m3, which are typical diesel-engine relevant conditions with different levels of exhaust gas recirculation (EGR). The liquid spray was treated with a traditional Lagrangian method. A 103-species skeletal mechanism was used for n-dodecane chemical kinetic model. It is observed that the main ignitions occur in rich mixture and the flames are thickened around 35 to 40 mm off the spray axis due to the enhanced turbulence induced by the strong recirculation upstream just behind the head of the flames at different oxygen concentrations. At 1 ms after start of injection, the soot production is dominated by the broader region of high temperature in rich mixture instead of the stronger oxidation of the high peak temperature. Multiple realizations were performed for the 15\% O$_2$ condition to understand the realization to realization variation and to establish best practices for ensemble-averaging diesel spray flames. Two indexes are defined. The structure-similarity index analysis suggests at least 5 realizations are needed to obtain 99\% similarity for mixture fraction if average of 16 realizations are used as the target at 0.8 ms. However, this scenario may be different for different scalars of interest. It is found that 2 realizations would be enough to reach 99\% of similarity for temperature, while 8 and 14 realizations are required to achieve 99\% similarity for soot and OH mass fraction, respectively. Similar findings are noticed at 1 ms. More realizations are needed for the magnitude-similarity index for the similar level of similarity as the structure-similarity index.

Pei, Yuanjiang↗

Impact of Advection Schemes on Tracer Interrelationships in Large-Eddy Simulations of Deep Convection

This study investigates the preservation of tracer interrelationships during advection in large-eddy simulations of an idealized deep convective cloud, which is particularly relevant to chemistry, aerosol, and cloud microphysics models. Employing the Cloud Model 1, advection is represented using third-, fifth-, and seventh-order weighted essentially non-oscillatory schemes. As a simplified analogy for cloud hydrometeors and aerosols, several inert passive tracers following linear and nonlinear relationships are initialized after the cloud reaches ~6-km depth. Numerical mixing in the simulated turbulent convective clouds leads to significant deviations from the initial nonlinear relationships between tracers. In these simulations, a considerable fraction of the grid points where the tracers’ nonlinear relationships are altered from advection are classified as unrealistic (e.g., ~13% for the environmental tracers on average), including errors from range-preserving unmixing and overshooting. Errors in the sum of three tracers are also relatively large, ranging between ~1% and 16% for 5% of the grid points in and near the cloud. The magnitude of unrealistic mixing and errors in the sum of three tracers generally increase with the order of accuracy of the advection scheme. These results are consistent across model grid spacings ranging from 50 to 200 m, and across three different flow realizations for each combination of grid spacing and advection scheme tested. Tests employing a previously proposed scalar normalization procedure show substantially reduced errors in the sum of three tracers with a relatively small negative impact on other tracer relationships. This analysis, therefore, suggests efficacy of the normalization procedure when applied to turbulent three-dimensional cloud simulations.

54 ENVIRONMENTAL SCIENCES↗

Toward Understanding the Differences between Mesoscale and Large-Eddy Simulations of Tropical Cyclones

In this work, we investigate the ability of mesoscale and large-eddy simulation (LES) model configurations to predict the mean wind speed profile within the boundary layer of tropical cyclones (TCs). To this end, we perform idealized simulations of five hypothetical intense storms ranging from categories 1 to 5 on the Saffir–Simpson scale and extract time-averaged quantities near the eyewall region. We compare the model-generated data against mean wind speed profiles compiled from dropsondes launched from reconnaissance aircraft operating in the North Atlantic basin. Our analysis shows that mesoscale- and LES-generated mean wind fields display important differences in the boundary layer, including the magnitude of shear as well as the height where their low-level wind speed maxima are located. In addition, a comparison between the two model configurations with the dropsonde data shows that both modeling approaches are unable to capture the typical structure of mean winds in the lower part of the TC boundary layer (10–500 m), calling into question the use of simulations of near-axisymmetric storms for investigating the wind structure of past events. To better understand these differences, we conduct a momentum-budget analysis and show that modeled turbulent fluxes are underestimated in the mesoscale boundary layer parameterization compared to the LES model. Based on the analysis of the horizontal turbulent fluxes and their potential impact on mean flow quantities, a TC-specific boundary layer parameterization may be needed.

17 WIND ENERGY↗

GE Renewable Energy: Perdigao wind dataset from Large Eddy Simulation and ERA5

Perdigao wind research dataset including ERA5 data, high resolution and low resolution Large Eddy Simulations for the year 2020 at 1 hour frequency. Generated using Copernicus Climate Change Service information 2022[1] [1] Hersbach, H., Bell, B., Berrisford, P., Biavati, G., Horányi, A., Muñoz Sabater, J., Nicolas, J., Peubey, C., Radu, R., Rozum, I., Schepers, D., Simmons, A., Soci, C., Dee, D., Thépaut, J-N. (2018): ERA5 hourly data on single levels from 1979 to present. Copernicus Climate Change Service (C3S) Climate Data Store (CDS). (Accessed on 05-04-2022), 10.24381/cds.adbb2d47

17 WIND ENERGY↗

Simulated Polarimetric Fields of Ice Vapor Growth Using the Adaptive Habit Model. Part I: Large-Eddy Simulations

Abstract The bulk adaptive habit model (AHM) explicitly predicts ice particle aspect ratio, improving the representation of microphysical processes and properties, including ice–liquid-phase partitioning. With the unique ability to predict ice particle shape and density, the AHM is combined with an offline forward operator to produce fields of simulated polarimetric variables. An evaluation of AHM-forward-simulated dual-polarization radar signatures in an idealized Arctic mixed-phase cloud is presented. Interpretations of those signatures are provided through microphysical model output using the large-eddy simulation mode of the Weather Research and Forecasting Model. Vapor-grown ice properties are associated with distinct observable signatures in polarimetric radar variables, with clear sensitivities to the simulated ice particle properties, including ice number, size, and distribution shape. In contrast, the liquid droplet number has little influence on both polarimetric and microphysical variables in the case presented herein. Polarimetric quantities are sensitive to the dominating crystal habit type in a volume, with enhancements for aspect ratios much lower or higher than unity. This synthesis of a microphysical model and a polarimetric forward simulator is a first step in the evaluation of detailed AHM microphysics.

54 ENVIRONMENTAL SCIENCES↗

Wall-Resolved Large-Eddy Simulations of Transonic Shock-Induced Flow Separation

Wall-resolved large-eddy simulations of shock-induced flow separation over an axisymmet- ric bump for a Mach number of 0.875 and a chord-based Reynolds number of 2.763 million are performed. The incoming boundary layer has a momentum-thickness Reynolds number of 6600 at 1.5 chords upstream of the bump. The calculations, which employ up to 24 billion grid points, simulate the experimental model of Bachalo and Johnson (AIAA Journal, Vol. 24, No. 3, 1986), except that the tunnel walls are ignored and free air is assumed. The effects of domain span and grid resolution are examined along with the main flowfield features. The predicted shock position as well as separation and reattachment locations agree well with the experiment. Grid convergence is observed in the attached region well upstream of separation. Two-point azimuthal correlations suggest that a span of at least 20 degrees is needed in the attached region, while a 120-degree span might be barely large enough in the separated region. Computed root-mean-square surface pressure fluctuations at the shock foot reach about 5 percent of ambient pressure and the level at reattachment location drops to about half of the primary peak. Simulations reveal evidence of the low-frequency shock unsteadiness; however, a much longer statistical sample is needed to investigate this phenomenon.

Uzun, Ali↗

Eulerian-Eulerian large eddy simulation of two-phase dilute bubbly flows

An efficient mathematical model is presented for conducting large eddy simulation (LES) of turbulent bubbly flows at low gas hold-ups. The mathematical model is based on the filtered multi-fluid equations derived by application of the component-weighted volume-averaging process of each phase. A two-fluid model is applied to the filtered set of equations, yielding a more computationally tractable set of filtered equations. The filtered equations are formulated in generalized curvilinear coordinates to simulate turbulent gas-liquid bubbly flows in complex geometries. The Germano model is used to account for sub-grid turbulent stresses. The gas and liquid momentum equations are discretized with the hybrid staggered/non-staggered method. The performance of the developed mathematical model is demonstrated by simulating the benchmark test case of a turbulent gas-liquid bubbly flow in a rectangular bubble column. The accuracy of the proposed method is assessed via comparison with the experimental data and other numerical results in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adaptive Mesh Refinement Large Eddy Simulation of the Supercritical Carbon Dioxide Round Turbulent Jet

Supercritical carbon dioxide (sCO2) is of interest to a range of engineering problems, including carbon capture, utilization, and storage (CCUS) as well as advanced cycles for power generation. Non-ideal variations in physical properties of sCO2 impact the physics of these systems. In this study, we simulate turbulent sCO2 jets to gain a better understanding of these physics.We use a second order finite volume method with adaptive mesh refinement as implemented in the first-principles simulation code PeleC to perform a Large Eddy Simulation (LES) of three turbulent jets of sCO2. Additionally, we use the Soave-Redlich-Kwong equation of state to close the system and examine the impact of a cubic equation of state on the turbulent flow physics. We look at velocity and Reynolds stress profiles at different downstream locations for three cases in which the temperature of the jet andthat of the ambient fluid differ in order to capture the effects of widely varying thermal properties in the pseudocritical region. These results are then contrasted with established theory for ideal gas jets.

adaptive mesh refinement↗

Preliminary large-eddy simulations of flow around a NACA 4412 airfoil using unstructured grids

Large-eddy simulation (LES) has matured to the point where application to complex flows is desirable. The extension to higher Reynolds numbers leads to an impractical number of grid points with existing structured-grid methods. Furthermore, most real world flows are rather difficult to represent geometrically with structured grids. Unstructured-grid methods offer a release from both of these constraints. However, just as it took many years for structured-grid methods to be well understood and reliable tools for LES, unstructured-grid methods must be carefully studied before we can expect them to attain their full potential. In the past two years, important building blocks have been put into place making possible a careful study of LES on unstructured grids. The first building block was an efficient mesh generator which allowed the placement of points according to smooth variation of physical length scales. This variation of length scales is in all three directions independently, which allows a large reduction in points when compared to structured-grid methods, which can only vary length scales in one direction at a time. The second building block was the development of a dynamic model appropriate for unstructured grids. The principle obstacle was the development of an unstructured-grid filtering operator. In the past year, some of the new filters developed by Jansen have been implemented into a highly parallelized finite element code based on the Galerkin/least-squares finite element method. We have chosen the NACA 4412 airfoil at maximum lift as the first simulation for a variety of reasons. First, it is a problem of significant interest since it would be the first LES of an aircraft component. Second, this flow has been the subject of three experimental studies. The third reason for considering this flow is the variety of flow features which provide an important test of the dynamic model. Only the dynamic model can be expected to perform satisfactorily in this variety of situations: from the laminar regions where it must not modify the flow at all to the turbulent boundary layers and wake where it must represent a wide variety of subgrid-scale structures. The flow configuration we have chosen is that of Wadcock (1987) at Reynolds number based on chord Re(sub c) = u(sub infinity)c/v = 1.64 x 10(exp 6), Mach number M = 0.2, and 12 deg angle of attack.

Jansen, Kenneth↗

Neural networks for large eddy simulations of wall-bounded turbulence: numerical experiments and challenges

Here, we examine the application of neural network-based methods to improve the accuracy of large eddy simulations of incompressible turbulent flows. The networks are trained to learn a mapping between flow features and the subgrid scales, and applied locally and instantaneously—in the same way as traditional physics-based subgrid closures. Models that use only the local resolved strain rate are poorly correlated with the actual subgrid forces obtained from filtering direct numerical simulation data. We see that highly accurate models in a priori testing are inaccurate in forward calculations, owing to the preponderance of numerical errors in implicitly filtered large eddy simulations. A network that accounts for the discretization errors is trained and found to be unstable in a posteriori testing. We identify a number of challenges that the approach faces, including a distribution shift that affects networks that fail to account for numerical errors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗