Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Laminarization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The Development of a Generalized Riser Flow Regime Map Based Upon Higher Moment and Chaotic Statistics Using Electrical Capacitance Volume Tomography (ECVT)

Dynamic analyses have been applied to the temporal signals from an Electro Capacitance Volume Tomography instrument located near mid-height on the riser of an industrial-scale cold-flow circulating fluidized bed to characterize gas-solids flow behavior in the riser. Twelve capacitance electrodes surround the cylindrical riser over a height of 1.3 m. The instrument used a neural network deconvolution algorithm to determine the spatially resolved solids fraction recorded at 52 Hz. Experiments were carried out over a range of gas and solids flows in the transport regime using a Geldart Group B bed material, high density polyethylene with mean particle size of 880 μm. The radial solids distribution was found to vary from one-time step to the next between profiles typical of laminar and turbulent flow. The duration of time spent in each of these flow profiles depended upon the operating regime – dilute, core-annular, or fast fluidized bed. The chaotic structure of the temporal data was characterized using the three conventional approaches: the first 4 moments from the distribution of signal in time, system memory parameters from the autocorrelation function and the Hurst exponent, and analysis of the correlationentropy and correlation dimension of the attractor. These signal analysis techniques were used to clearly distinguish differences between different transport operating regimes. Specifically, it was experimentally observed that a riser transitions from core annular flow profile to dilute and dense regimes via increasing the frequency of short term transients to either dilute or dense flow profiles, respectively. A regime map was generated based upon these dynamics using solids flux and gas velocity axes. Fast fluidized, core annular, and dilute each exhibited different degree of dynamic characteristics typical of fluid dominated or particle compromising behavior. It should be noted that the magnitude for the different statistics was in the same range regardless of the regime, it was the radial profile for the statistic that changed and subsequently identified that there was a change in the regime. Finally, a reduced regime map was developed consisting of plotting the gas velocity normalized by the upper transport velocity versus the solids flux normalized by the saturation carrying capacity. The use of this reduced plot allowed the data from widely different conditions to be plotted and compared on the same<p>graph. Note that in many instances, some of the statistics identified the operating point as being in one regime while others indicated that it was in another indicating a transition region between dilute or core annular regimes and between the core annular and fast fluidization regimes. This now provides a tool that can be used to optimize process performance, identify changes in operating states, or replicate process dynamics during process scaling or changing operating parameters. </p>

Breault, Ronald↗
DOE OSTI2020

A priori analysis of a power-law sub-filter scale mixing model for transported PDF modeling of high Karlovitz turbulent premixed flames

Accurate modeling of mixing in large-eddy simulation (LES) / transported probability density function (PDF) modeling of turbulent combustion remains an outstanding issue. The issue is particularly salient in turbulent premixed combustion under extreme conditions such as high-Karlovitz number Ka. Here, the present study addresses this issue by conducting an a priori analysis of a power-law scaling based mixing timescale model for the transported PDF model. A recently produced DNS dataset of a high-Ka turbulent jet flame is used for the analysis. A power-law scaling is observed for a scaling factor used to model the sub-filter scale mixing timescale in this high-Ka turbulent premixed DNS flame when the LES filter size is much greater than the characteristic thermal thickness of a laminar premixed flame. The sensitivity of the observed power-law scaling to the different viewpoints (local or global) and to the different scalars for the data analysis is examined and the dependence of the model parameters on the dimensionless numbers Ka and Re (the Reynolds number) is investigated. Different model formulations for the mixing timescale are then constructed and assessed in the DNS flame. The proposed model is found to be able to reproduce the mixing timescale informed by the high-Ka DNS flame significantly better than a previous model.

42 ENGINEERING↗
DOE OSTI2020

Simultaneous 10 kHz three-dimensional CH 2 O and tomographic PIV measurements in a lifted partially-premixed jet flame

High-speed, three-dimensional (3D) scalar-velocity field measurements are demonstrated in a lifted partially-premixed dimethyl-ether/air jet flame using simultaneous laser-induced fluorescence (LIF) of formaldehyde (CH 2 O) and tomographic particle image velocimetry (TPIV). The 3D LIF measurements are performed by raster scanning the laser beam from a 100 kHz pulse-burst laser across the probe volume using an acousto-optic deflector. The volumetric reconstruction of the LIF signal from ten parallel planes provides quasi-instantaneous 3D LIF measurements that are synchronized with 10 kHz TPIV measurements. Here, the temporally resolved CH 2 O-LIF and velocity field data are used to analyze Lagrangian particle trajectories and displacement speeds at the base of the lifted flame. The particle trajectories reveal flow structures that are difficult to observe in an Eulerian reference frame. Positive and negative displacement speeds are observed at the CH 2 O-LIF surfaces at the inner and outer regions of the jet flame with a maximum displacement speed of approximately eight times the laminar flame speed of a stoichiometric dimethyl-ether/air mixture. The observations in present study support formation of lean premixed flames near the flame base whose role in flame stabilization should be investigated in more detail.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Investigation of the end-gas autoignition process in natural gas engines and evaluation of the methane number index

Engine knock and misfire are barriers to pathways leading to high-efficiency Spark-Ignited (SI) Natural Gas (NG) engines. The general tendency to knock is highly dependent on engine operating conditions and the fuel reactivity. The problem is further complicated by the wide range of chemical reactivity in pipeline quality NG, represented by the Methane Number (MN) (65< MN<95). Understanding the underlying phenomena responsible for engine knock can support the development of predictive tools capable of identifying knock onset/intensity as well as a fuel’s propensity to knock, allowing engine manufacturers to expand the knock envelope and design more efficient/robust SI NG engines. Additionally, there is an opportunity for increased efficiency by controlling levels of end-gas autoignition if this can be predicted and controlled. This work focuses on the development of a novel methodology to understand/predict a fuel’s propensity to knock. This methodology is based on the charge fraction undergoing autoignition, namely fractional end-gas autoignition (F-EGAI), and was developed based on first order laminar flame speeds and ignition delay analysis combined with a 0-D homogeneous batch reactor model. This methodology proved to be suitable to predict a fuel’s propensity to knock, even under conditions when light knock was observed. The simple modeling approach was used to explain the results from a series of MN tests with multiple NG compositions exhibiting a wide range of reactivity compositions and providing insight on why fuels of very different chemical compositions can have the same MN. Finally, a CFD model was developed was used to confirm the methodology capability and provide further insights in the physical and chemical phenomena behind end gas autoignition.

42 ENGINEERING↗
DOE OSTI2022

Methanol oxidation up to 100 atm in a supercritical pressure jet-stirred reactor

Methanol (CH 3 OH) has attracted considerable attention as a renewable fuel or fuel additive with low greenhouse gas emissions. Methanol oxidation was studied using a recently developed supercritical pressure jet-stirred reactor (SP-JSR) at pressures of 10 and 100 atm, at temperatures from 550 to 950 K, and at equivalence ratios of 0.1, 1.0, and 9.0 in experiments and simulations. Here, the experimental results show that the onset temperature of CH 3 OH oxidation at 100 atm is around 700 K, which is more than 100 K lower than the onset at 10 atm and this trend cannot be predicted by the existing kinetics models. Furthermore, a negative temperature coefficient (NTC) behavior was clearly observed at 100 atm at fuel rich conditions for methanol for the first time. To understand the observed temperature shift in the reactivity and the NTC effect, we updated some key elementary reaction rates of relevance to high pressure CH 3 OH oxidation from the literature and added some new low-temperature reaction pathways such as CH 2 O + HO 2 = HOCH 2 O 2 (RO 2 ), RO 2 + RO 2 = HOCH 2 O (RO) + HOCH 2 O (RO) + O 2 , and CH 3 OH + RO 2 = CH 2 OH + HOCH 2 O 2 H (ROOH). Although the model with these updates improves the prediction somewhat for the experimental data at 100 atm and reproduces well high-temperature ignition delay times and laminar flame speed data in the literature, discrepancies still exist for some aspects of the 100 atm low-temperature oxidation data. In addition, it was found that the pressure-dependent HO 2 chemistry shifts to lower temperature as the pressure increases such that the NTC effect at fuel-lean conditions is suppressed. Therefore, as shown in the experiments, the NTC phenomenon was only observed at the fuel-rich condition where fuel radicals are abundant and the HO 2 chemistry at high pressure is weakened by the lack of oxygen resulting in comparatively little HO 2 formation.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

DNS Of the ignition process of n-heptane/air premixed combustion with low-temperature chemistry in turbulent boundary layer

In the present work, three-dimensional direct numerical simulation (DNS) of n-heptane/air premixed combustion in turbulent boundary layer was performed to explore the near-wall ignition process with low -temperature chemistry. A reduced chemical mechanism with 58 species and 387 elementary reactions for n-heptane combustion was used in the DNS. The general characteristics of the ignition process near the wall were examined. Here, it was found that low-temperature ignition (LTI) dominates the upstream region, and high -temperature ignition (HTI) appears in the downstream region. The ignition process and the low-temperature chemistry pathways of the DNS are compared with those of a corresponding laminar case. It was found that the ignition process was affected by turbulence, which results in thickened reaction zones. However, the carbon flow analysis of low-temperature chemistry showed that turbulence rarely affects the low-temperature chemistry pathway. The combustion modes of various regions were scrutinized based on the budget terms of species transport equations and the chemical explosion mode analysis (CEMA). It was shown that the reaction term of RO 2 is significant during the LTI process of the upstream region, and the reaction terms of CH 2 O and CO 2 are evident in the downstream region, indicating the occurrence of HTI. It was also shown that auto-ignition is dominant in the upstream region. With increasing streamwise distance, the contribution of flame propagation increases, which takes over that of auto-ignition in the near-wall region.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Heat release surrogates for NH 3 /H 2 /N 2 –air premixed flames

The present study investigates the performance of NH, NH 2 , O-atom, and H-atom as heat release rate (HRR) surrogates for NH 3 /H 2 /N 2 –air premixed flame through simulations. The simulations are conducted across different pressures, reactant inlet temperatures, fuel blend compositions, and equivalence ratios. Cantera is used to simulate one-dimensional (1D) freely propagating flames to investigate the spatial correlations of the species with the HRR. PeleLMeX, a low-Mach direct numerical simulation (DNS) code with Adaptive Mesh Refinement (AMR), is used to simulate two-dimensional (2D) flame-vortex interactions to investigate the temporal correlations including stretch effects. Three different mechanisms (Jiang et al. 2020; Glarborg et al. 2018; Okafor et al. 2018) were considered in the 1D flame simulations, whereas only the Jiang mechanism was considered in the flame-vortex simulations. The HRR surrogate performance for the 2D flames is evaluated at two different locations: (1) the centerline and (2) the flame cusp. The cusp is defined as the region in the flame front with the greatest curvature and the centerline encounters the highest tangential strain rate. The 1D flame results suggest that, although there is not uniformly good spatial correlation for HRR across all flame conditions, NH is the best overall as a HRR surrogate for laminar flames. The 2D flame results, however, suggest that O-atom and H-atom have satisfactory temporal correlations at different conditions—the former for rich flames, the latter for high-pressure flames. Furthermore, these simulations provide guidance to experimental measurements of surrogate HRR markers in unsteady multi-dimensional flames using laser diagnostics to detect species such as NH, O-atom, and H-atom.

Ammonia↗
DOE OSTI2024

Hexamethyldisiloxane pyrolysis: probing H-atom initiation by femtosecond two-photon LIF

Previous experiments have led to the hypothesis that pyrolysis of silica nanoparticle precursors carried in an inert central gas jet surrounded by a laminar flame is initiated not by thermal decomposition (the measured jet temperatures are too low for pyrolysis), but by reactions with H-atoms diffusing from the surrounding flame into the jet. The current work tests this hypothesis using femtosecond two-photon laser-induced fluorescence (fs-TPLIF) to image H-atom concentrations in the same flame configuration as the previous experiments. Methane flames (ϕ = 0.83, 1.01 and 1.13) were generated using a multi-element diffusion (Hencken) burner equipped with a central tube through which the N2 jet was introduced. The fs-TPLIF line imaging showed significant concentrations of H-atoms in the nitrogen jets at heights above the burner (HAB) close to the methane flame front. The measurements indicate radial diffusion of the H atoms from the flame to the jet is significant. The H-atom concentrations in the jet increased with increasing stoichiometry of the methane flame. Additional experiments were performed with hexamethyldisiloxane entrained in the central jet flow. In each case, a diffusion flame producing silica nanoparticles was established at the boundaries between the central jet and the methane flames. The 2D H-atom images showed a transition from over-ventilated diffusion flames to under-ventilated diffusion flames with increasing equivalence ratio. Furthermore, the fs-TPLIF profiles show a significant production of H-atoms within the jet when the surrounding flame is lean. This knowledge contributes to a deeper understanding of the underlying mechanisms governing these synthesis flame systems and opens avenues for advancing silica nanoparticle synthesis techniques.

Kim, Keunsoo↗
DOE OSTI2024

High resolution numerical simulations of methane pool fires using adaptive mesh refinement

The ability to accurately predict the structure and dynamics of pool fires using computational simulations is of great interest in a wide variety of applications, including accidental and wildland fires. However, the presence of physical processes spanning a broad range of spatial and temporal scales poses a significant challenge for simulations of such fires, particularly at conditions near the transition between laminar and turbulent flow. Here, in this study, we examine the transition to turbulence in methane pool fires using high-resolution simulations with multi-step finite rate chemistry, where adaptive mesh refinement (AMR) is used to directly resolve small-scale flow phenomena. We perform three simulations of methane pool fires, each with increasing diameter, corresponding to increasing inlet Reynolds and Richardson numbers. As the diameter increases, the flow transitions from organized vortex roll-up via the puffing instability to much more chaotic mixing associated with finger formation along the shear layer and core collapse near the inlet. These effects combine to create additional mixing close to the inlet, thereby enhancing fuel consumption and causing more rapid acceleration of the fluid above the pool. We also make comparisons between the transition to turbulence and core collapse in the present pool fires and in inert helium plumes, which are often used as surrogates for the study of buoyant reacting flows.

42 ENGINEERING↗
DOE OSTI2024

Near wake evolution of a tidal stream turbine due to asymmetric sheared turbulent inflow with different integral length scales

Tidal stream turbines deployed at highly energetic open water sites are subjected to sheared inflow in the rotor plane. The inflow shear is expected to cause asymmetric loading on the rotor blades and affect the downstream wake. In the current study, two different turbulent inflow conditions, static-high shear and dynamic shear, were generated via an active-grid turbulence generator. A 1:20 scaled three-bladed horizontal axis tidal turbine model was tested in those conditions. The results were compared to a quasi-laminar case with no imposed turbulence or shear. The results show that the high shear reduces the average performance, with a drop of up to 16% in the optimal power coefficient. Besides, the shear profiles increase torque fluctuations and induce significant differences in wake hydrodynamics between the high-speed (upper) and low-speed (lower) regions. The large integral length scales further enhance the load fluctuations perceived by the rotor but have a negligible effect on the mean wake field quantities and the wake recovery. The lower half region featured a faster breakdown of tip vortex structure and a rapid drop of swirl number, a phenomenon conjectured to be a consequence of the strong turbulence intensities and Reynolds stresses in the lower half region. Furthermore, the sheared turbulent inflow also results in a very intensive energy redistribution process towards large-scale, low-frequency motions, which is important to the downstream turbines.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

How equation of state selection impacts accuracy near the critical point: Forced convection supercritical CO 2 flow over a cylinder

Increasing application of supercritical fluids leads to increased use of numerical simulations to guide designs. However, the impact of Equations of State (EoS) selection on computational cost and accuracy is not well understood. Laminar flow around a heated cylinder is used as a test case. A robust matrix of 99-simulations is used to analyze the flow of carbon dioxide just above the critical point at the isobaric condition of 8 MPa and temperatures between 305 and 390 K. Four EoS were studied: Ideal Gas Law, cubic EoS’s Peng-Robinson and Soave-Redlich-Kwong, and the Span-Wagner EoS. Results were identical for isothermal cases, but for heated or cooled cases, the high-fidelity Span-Wagner EoS simulations presented drastically different wake structures. Compared to the high-fidelity SW EoS, cEoS’s underestimated Nu values by up to 38% and cEoS’s underestimated CD values by 18–42%. In conclusion, the Span-Wagner EoS required only 17% more computation time then the cubic EoS simulations, making the Span-Wagner EoS recommended for engineering design.

42 ENGINEERING↗
DOE OSTI2022

Machine learning-based optimization of air-cooled heat sinks

Machine learning-based models using Artificial Neural Network (ANN) and greedy search algorithm are used to optimize air-cooled parallel plate-finned heat sinks (PPFHSs) subjected to laminar flow over an extensive range of design parameters. Here, the thermal and hydraulic performances of PPFHSs are represented by heat transfer coefficient (h) and pressure drop (ΔP), respectively. Optimization objectives for PPFHS designs can vary from industry to industry depending on their design priorities. The present study proposes a novel and generalized optimization method that defines practical optimization objectives and provides an accurate optimization process to design effective PPFHSs for a wide range of industrial applications with different design requirements. Three optimization objectives are presented in this study: (i) the largest h PΔ, (ii) the largest h within a specified maximum allowed flow rate, and (iii) the lowest weight that maximizes h for operation within the maximum allowed flow rate. While the shortcoming of the first objective is demonstrated, the other two objectives are found to be suitable for designing effective heat sinks (HSs) across different applications. Results suggest a promising trend from the third objective to develop HSs with ~ 37-68% lower weight, 80-85% reduced ΔP, and negligible penalty in h compared with optimized HSs obtained from the second objective. However, since the third objective leads to HSs with thinner fins, structural analysis should be performed to ensure reliable operation of the HSs.

42 ENGINEERING↗
DOE OSTI2022

On the enhancement of boundary layer skin friction by turbulence: an angular momentum approach

Turbulence enhances the wall shear stress in boundary layers, significantly increasing the drag on streamlined bodies. Other flow features such as free stream pressure gradients and streamwise boundary layer growth also strongly influence the local skin friction. In this paper, an angular momentum integral (AMI) equation is introduced to quantify these effects by representing them as torques that alter the shape of the mean velocity profile. This approach uniquely isolates the skin friction of a Blasius boundary layer in a single term that depends only on the Reynolds number most relevant to the flow's engineering context, so that other torques are interpreted as augmentations relative to the laminar case having the same Reynolds number. The AMI equation for external flows shares this key property with the so-called FIK relation for internal flows (Fukagata et al. , Phys. Fluids , vol. 14, 2002, pp. L73–L76). Without a geometrically imposed boundary layer thickness, the length scale in the Reynolds number for the AMI equation may be chosen freely. After a brief demonstration using Falkner–Skan boundary layers, the AMI equation is applied as a diagnostic tool on four transitional and turbulent boundary layer direct numerical simulation datasets. Regions of negative wall-normal velocity are shown to play a key role in limiting the peak skin friction during the late stages of transition, and the relative strengths of terms in the AMI equation become independent of the transition mechanism a very short distance into the fully turbulent regime. The AMI equation establishes an intuitive, extensible framework for interpreting the impact of turbulence and flow control strategies on boundary layer skin friction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Floquet stability analyses of stratified oscillating boundary layers on adiabatic slopes

The presence of a no-slip, impermeable, adiabatic, sloped boundary in an otherwise quiescent, stably stratified, Boussinesq flow generates baroclinic vorticity within a diffusive boundary layer. Such conditions are typical of the oscillating boundary layers on adiabatic abyssal slopes, sloped lake bathymetry and sloped coastal bathymetry in the absence of high-wavenumber internal waves, mean flows, far-field turbulence on larger scales, and resonant tidal–bathymetric interaction. We investigate the linear stability of the oscillating flow within non-dimensional parameter space typical of the $M_2$ tide and hydraulically smooth, middle-latitude abyssal slopes through Floquet linear stability analysis. The flow dynamics depends on three non-dimensional variables: the Reynolds number for Stokes’ second problem, the Prandtl number, and a frequency ratio that accounts for the resonance conditions ($C$, criticality) of the buoyant restoring force and the tidal forcing. The Floquet analysis results suggest that oscillating laminar boundary layers on adiabatic abyssal slopes are increasingly unstable as Reynolds number, criticality parameter and/or spanwise disturbance wavenumber are increased. We also show that the two-dimensional Floquet linear instability necessarily generates three-dimensional baroclinic vorticity, which suggests that the evolution of the gravitational instabilities may be nonlinear as $t→∞$.

42 ENGINEERING↗
DOE OSTI2020

Characterization of flowing liquid films as a regenerating plasma mirror for high repetition-rate laser contrast enhancement

In this paper, we characterize a high repetition-rate regenerating plasma mirror produced by the thin film of liquid formed when two laminar streams collide. The use of a flowing liquid film is inexpensive and the interaction surface refreshes automatically, avoiding buildup of on-target debris. The composition of the liquid material and the relative angle of the film-generating nozzles was optimized for this application. Spectra measured in reflection from a water-based plasma mirror showed a blue shift but an optical reflectivity of up to 30%. The thickness of the film was found to be of the order of 2 μm, and the stability of the reflected spot was ≈1 mrad. The reflected beam profile was highly distorted but stable. Further optimization of the nozzles to affect the fluid flow should enable significant improvements in control of the fluid films and increase in the reflectivity of these mirrors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

The Influence of Nonlocal Metal–Dielectric Environments on Physical and Chemical Processes

Plasmonic nanolayers and laminar metallic/dielectric multilayers were originally developed for optical cloaking applications and lensing applications that could potentially image objects whose size was below the diffraction limit. These assemblies were initially formed from gold or silver nanorods grown within an alumina mesh. However, more recently, assemblies with similar properties have also been prepared by sequential thin-layer deposition of alternating layers of gold and magnesium fluoride (MgF 2 ). These metal/dielectric composite materials enable control of the dielectric constant in the directions perpendicular to the layers and balance the real and imaginary dielectric constants of the assembly such that the speed and the amplitude of the waves traveling through the assembly are not attenuated. In this Account, we will also focus on a few of the applications ranging from surface wetting to fluorescence quenching to enhancement of photochemical reactions. First, we will share an introduction to processes used to create these materials, which are combinations of low refractive index metals and transparent higher index materials arranged in a scalable repeating fashion. Two fabrication methods were employed: an electrochemical deposition of Ag nanorods into an anodized alumina matrix which produced materials with an anisotropic negative refractive index material within the plane of the film and lamellar metal/dielectric layers in which the negative index perpendicular to the growth direction. These alternating layers of plasmonic metals and dielectric materials were ultimately chosen to prepare films for further testing, because of their relative ease of fabrication. We will continue with a discussion of a few of the applications of both of these nonlocal dielectric composite materials including more specialized plasmonic, composite, and hyperbolic metamaterials including fluorescence quenching, photochemical reactions, and surface wetting. In each of these applications, the unique response caused by the enhancement of the electric field and the interface between hyperbolic materials and plasmonic materials as they interact photophysically with their near neighbors is presented. In each of the applications, the enhanced electric field extends from the composite substrate layer to interact with its near neighbors and beyond. Furthermore, the presence of this extended interaction can be observed in the form of decreased emission lifetime, enhancement of photochemical reaction rates, and changes in the surface energies measured by contact angle goniometry. In this Account, all of these situations will be addressed. Finally, we will conclude with a summary and vision for the future as well as a discussion of the unique challenges and opportunities available as research active faculty at an HBCU.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Probing the Chemical Kinetics of Minimalist Functional Group Gasoline Surrogates

We report surrogate mixtures are routinely used for understanding gasoline fuel combustion in engine simulations. The general trend in surrogate formulation has been to increase the number of fuel components in a mixture to better emulate real fuel properties. Recently, a new surrogate design strategy based on functional group analysis of real gasolines was proposed using a minimal number of species [minimalist functional group (MFG)-approach]. MFG surrogates (having just one or two components) could experimentally capture the ignition delay time (IDT), threshold sooting index, and smoke point of different gasoline fuels with hundreds of components. However, other combustion characteristics were not explored, and kinetic modeling of MFG surrogates was not reported. These aspects are addressed in this paper, where the combustion behavior of MFG surrogates for various gasolines was assessed by simulating IDT, jet-stirred reactor oxidation, and premixed laminar flame speeds using chemical kinetic modeling. MFG simulations were compared with experimental data of the real gasolines as well as with the more complex multicomponent (five to nine species) surrogates. This study reveals that binary MFG surrogate mixtures are capable of accurately simulating the combustion behavior of more complex gasoline fuels with hundreds of components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Experimental and Kinetic Modeling Study of 3-Methyl-2-butenol (Prenol) Oxidation

Longer chain alcohols with 4–5 carbon atoms are attractive alternative fuels as they can be derived from biological sources and since their combustion leads to lower exhaust gas levels of NO x and soot compared to commercial fossil fuels. The auto-ignition behavior of fuels that contain both a hydroxyl group and a C=C double bond in their molecular structure is not well established in the literature. Understanding the influence of these functional groups on the ignition behavior of fuels is critical in the development of tailor-made fuels for advanced combustion engines. In this study, ignition delay times of an unsaturated alcohol, 3-methyl-2-butenol (prenol), are measured using a high-pressure shock tube and a rapid compression machine at pressures of 15 and 30 bar at equivalence ratios of 0.5, 1.0, and 2.0 in “air” in the temperature range 600–1400 K. Furthermore, a detailed kinetic model is developed and validated using the new experimental data in this study. In addition, speciation data in a jet-stirred reactor, ignition delay times, and laminar burning velocities available in the literature were also used to validate the new kinetic model. Fuel flux and sensitivity analyses are performed using this new model to determine the important fuel consumption pathways and critical reactions that affect the reactivity of prenol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗