Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Laminarization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Laminar-Separation Sensor

Sensor detects flow reversal in boundary layer. Laminar-separation sensor provides means for detecting laminar-separation bubble by use of very thin, surface-mounted sensor. Consists of flush array of three proximate thin films. Middle film electronically heated by means of constant-temperature anemometer (CTA). Outer films, one upstream and one downstream of middle film, incorporated into bridge circuit to respond as resistance thermometers. This sensor provides only known surface-mounted means for positively identifying pressure of laminar separation as cause of boundary-layer transition.

Holmes, Bruce J.↗
NASA NTRS1987

Wind-tunnel investigation of a full-scale general aviation airplane equipped with an advanced natural laminar flow wing

An investigation was conducted in the Langley 30- by 60-Foot Wind Tunnel to evaluate the performance, stability, and control characteristics of a full-scale general aviation airplane equipped with an advanced laminar flow wing. The study focused on the effects of natural laminar flow and advanced boundary layer transition on performance, stability, and control, and also on the effects of several wing leading edge modifications on the stall/departure resistance of the configuration. Data were measured over an angle-of-attack range from -6 to 40 deg and an angle-of-sideslip range from -6 to 20 deg. The Reynolds number was varied from 1.4 to 2.4 x 10 to the 6th power based on the mean aerodynamic chord. Additional measurements were made using hot-film and sublimating chemical techniques to determine the condition of the wing boundary layer, and wool tufts were used to study the wing stall characteristics. The investigation showed that large regions of natural laminar flow existed on the wing which would significantly enhance cruise performance. Also, because of the characteristics of the airfoil section, artificially tripping the wing boundary layer to a turbulent condition did not significantly effect the lift, stability, and control characteristics. The addition of a leading-edge droop arrangement was found to increase the stall angle of attack at the wingtips and, therefore, was considered to be effective in improving the stall/departure resistance of the configuration. Also the addition of the droop arrangement resulted in only minor increases in drag.

Murri, Daniel G.↗
NASA NTRS1986

Advanced natural laminar flow airfoil with high lift to drag ratio

An experimental verification of a high performance natural laminar flow (NLF) airfoil for low speed and high Reynolds number applications was completed in the Langley Low Turbulence Pressure Tunnel (LTPT). Theoretical development allowed for the achievement of 0.70 chord laminar flow on both surfaces by the use of accelerated flow as long as tunnel turbulence did not cause upstream movement of transition with increasing chord Reynolds number. With such a rearward pressure recovery, a concave type deceleration was implemented. Two-dimensional theoretical analysis indicated that a minimum profile drag coefficient of 0.0026 was possible with the desired laminar flow at the design condition. With the three-foot chord two-dimensional model constructed for the LTPT experiment, a minimum profile drag coefficient of 0.0027 was measured at c sub l = 0.41 and Re sub c = 10 x 10 to the 6th power. The low drag bucket was shifted over a considerably large c sub l range by the use of the 12.5 percent chord trailing edge flap. A two-dimensional lift to drag ratio (L/D) was 245. Surprisingly high c sub l max values were obtained for an airfoil of this type. A 0.20 chort split flap with 60 deg deflection was also implemented to verify the airfoil's lift capabilities. A maximum lift coefficient of 2.70 was attained at Reynolds numbers of 3 and 6 million.

Viken, Jeffrey K.↗
NASA NTRS1986

Design and experimental evaluation of a swept supercritical Laminar Flow Control (LFC) airfoil

A large chord swept supercritical laminar flow control (LFC) airfoil was designed, constructed, and tested in the NASA Langley 8-ft Transonic Pressure Tunnel (TPT). The LFC airfoil experiment was established to provide basic information concerning the design and compatibility of high-performance supercritical airfoils with suction boundary layer control achieved through discrete fine slots or porous surface concepts. It was aimed at validating prediction techniques and establishing a technology base for future transport designs and drag reduction. Good agreement was obtained between measured and theoretically designed shockless pressure distributions. Suction laminarization was maintained over an extensive supercritical zone up to high Reynolds numbers before transition gradually moved forward. Full-chord laminar flow was maintained on the upper and lower surfaces at M sub infinity = 0.82 up to R sub c is less than or equal to 12 x 10 to the 6th power. When accounting for both the suction and wake drag, the total drag could be reducted by at least one-half of that for an equivalent turbulent airfoil. Specific objectives for the LFC experiment are given.

Harvey, W. D.↗
NASA NTRS1988

A velocity-pressure integrated, mixed interpolation, Galerkin finite element method for high Reynolds number laminar flows

A velocity-pressure integrated, mixed interpolation, Galerkin finite element method for the Navier-Stokes equations is presented. In the method, the velocity variables were interpolated using complete quadratic shape functions and the pressure was interpolated using linear shape functions. For the two dimensional case, the pressure is defined on a triangular element which is contained inside the complete biquadratic element for velocity variables; and for the three dimensional case, the pressure is defined on a tetrahedral element which is again contained inside the complete tri-quadratic element. Thus the pressure is discontinuous across the element boundaries. Example problems considered include: a cavity flow for Reynolds number of 400 through 10,000; a laminar backward facing step flow; and a laminar flow in a square duct of strong curvature. The computational results compared favorable with those of the finite difference methods as well as experimental data available. A finite elememt computer program for incompressible, laminar flows is presented.

Kim, Sang-Wook↗
NASA NTRS1988

Laminar flow control is maturing

Recent research demonstrates that laminar flow (LF) can be reliable in flight and that the support system need not be complex. Shaping produces favorable pressure gradients for maintaining natural laminar flow (NLF), and laminar flow control (LFC) techniques such as full chord suction promise a fuel-saving payoff of up to 30 percent on long-range missions. For large aircraft, current research is concentrated on hybrid LFC concepts which combine suction and pressure-gradient control. At NASA Ames, an F-14 with variable wing sweep has been flight tested with smooth surface gloves on the wings; preliminary results indicate high transition Reynolds numbers to sweep angles as large as 25 deg. In addition, a 757 was flight tested with an NLF glove on the right wing just outboard of the engine pylon; and the LF was found to be suprisingly robust.

Wagner, Richard D.↗
NASA NTRS1988

An arrayed hot-film sensor for detection of laminar boundary-layer flow disturbance spatial characteristics

An arrayed hot-film sensor has been developed for use in laminar boundary-layer research for the detection of crossflow or Goertler vortices. This sensor has been developed to detect spatial variations in heat transfer which are characteristic of crossflow or Goertler vortices. The sensor is ultimately intended for flight research applications. This paper describes the sensor, its priciples of operation, signal analysis techniques, and experimental results illustrating the spatial detection capabilities of this specialized hot-film device. Discretely placed spheres placed in the boundary layer created alternating regions of undisturbed and disturbed laminar flow over a prototype sensor. Flow visualization results were correlated with the sensor output to demonstrate the ability of the sensor to determine the spatial boundaries of localized disturbances in laminar flow. This work represents the initial steps toward the validation and calibration of an arrayed hot-film sensor for the detection of crossflow or Goertler vorticity wavelength and/or wave frequency.

Wusk, M. S.↗
NASA NTRS1989

Measuring Laminar-Separation Bubbles On Airfoils

Nonintrusive multielement heat-transfer sensor overcomes limitations of previous methods. New technique determines simultaneously extent of laminar boundary layer and locations of laminar separation, transition in separated layer, and turbulent reattachment. In tests, only small amounts of heat introduced, and heated thin films caused little disturbance to shear layer or to each other. Promising tool for measurements of stability of laminar boundary layers, separated shear layers, and transitional separation bubbles. Simple and capable of providing comprehensive picture of state of shear flow along entire surface. Significant savings in tunnel (or flight) test time with corresponding savings in cost.

Stack, John P.↗
NASA NTRS1988

Numerical analysis of laminar and turbulent incompressible flows using the finite element Fluid Dynamics Analysis Package (FIDAP)

The purpose of the study is the evaluation of the numerical accuracy of FIDAP (Fluid Dynamics Analysis Package). Accordingly, four test problems in laminar and turbulent incompressible flows are selected and the computational results of these problems compared with other numerical solutions and/or experimental data. These problems include: (1) 2-D laminar flow inside a wall-driven cavity; (2) 2-D laminar flow over a backward-facing step; (3) 2-D turbulent flow over a backward-facing step; and (4) 2-D turbulent flow through a turn-around duct.

Sohn, Jeong L.↗
NASA NTRS1988

Method for laminar boundary layer transition visualization in flight

Disclosed is a method of visualizing laminar to turbulent boundary layer transition, shock location, and laminar separation bubbles around a test surface. A liquid crystal coating is formulated using an unencapsulated liquid crystal operable in a temperature bandwidth compatible with the temperature environment around the test surface. The liquid crystal coating is applied to the test surface, which is preferably pretreated by painting with a flat, black paint to achieve a deep matte coating, after which the surface is subjected to a liquid or gas flow. Color change in the liquid crystal coating is produced in response to differences in relative shear stress within the boundary layer around the test surface. The novelty of this invention resides in the use of liquid crystals which are sensitive to shear stress to show aerodynamic phenomena such as a boundary layer transition, shock location, and laminar separation bubbles around a test surface.

Bruce J Holmes↗
NASA NTRS1987

Flight survey of the 757 wing noise field and its effects on laminar boundary layer transition. Volume 2: Data compilation

A flight test program was performed using the Boeing 757 flight research airplane to investigate the effect of noise from wing mounted engines on laminar boundary layer transition. An NLF glove was installed on the right wing panel just outboard of the engine. The extent of laminar flow on the glove was measured as a function of engine power setting for a range of flight conditions. A combination of surface and probe microphones was distributed over the upper and lower wing surfaces to measure sound spectra. The flight test program was completed in June 1985 and the results of preliminary analysis indicate that a maximum of about 29 percent of chord laminar flow was obtained on the upper surface and about 28 percent on the lower surface (at a high sideslip condition). The engine speed was varied from about 2600 (idle) to about 4500 (maximum continuous power) r/min. This produced changes in sound pressure level up to 20 dB on the lower surface. On the upper surface, the noise levels were independent of engine power but sensitive to airplane Mach number. No effect of engine power setting on upper surface transition location was observed, and only a small forward movement of the transition location on the lower surface was observed at the high power settings. Volume 1 of this report contains the program description and data analysis. Volume 2 is a compilation of all of the flight test data.

Source record↗
NASA NTRS1989

Feasibility and benefits of laminar flow control on supersonic cruise airplanes

An evaluation was made of the applicability and benefits of laminar flow control (LFC) technology to supersonic cruise airplanes. Ancillary objectives were to identify the technical issues critical to supersonic LFC application, and to determine how those issues can be addressed through flight and wind-tunnel testing. Vehicle types studied include a Mach 2.2 supersonic transport configuration, a Mach 4.0 transport, and two Mach 2-class fighter concepts. Laminar flow control methodologies developed for subsonic and transonic wing laminarization were extended and applied. No intractible aerodynamic problems were found in applying LFC to airplanes of the Mach 2 class, even ones of large size. Improvements of 12 to 17 percent in lift-drag ratios were found. Several key technical issues, such as contamination avoidance and excresence criteria were identified. Recommendations are made for their resolution. A need for an inverse supersonic wing design methodology is indicated.

Powell, A. G.↗
NASA NTRS1988

Evaluation of FIDAP on some classical laminar and turbulent benchmarks

The numerical accuracy of the fluid-dynamics code FIDAP is investigated by means of test computations on two-dimensional flows. The theoretical basis of the algorithm is briefly reviewed, and results for laminar flow in a wall-driven cavity and for both laminar and turbulent flows over a backward-facing step are presented in extensive tables and graphs and characterized in detail. Good agreement with published experimental data and previous computations is obtained for laminar flows using a version of FIDAP without streamlined upwinding (STU). For turbulent flows, the addition of STU is found to be useful, although it causes separation-zone reattachment length to be underpredicted.

Sohn, J. L.↗
NASA NTRS1988

Toward lower drag with laminar flow technology

The most promising method of achieving significantly lower skin-friction drag of an aircraft component is through the stabilization and maintenance of a laminar boundary layer over a large fraction of its surface. In a number of applications, however, laminar flow is unfeasible and/or undesirable, and the most efficient turbulent flow design must be provided. The development of both laminar and turbulent airfoil and wing designs over the past decade is reviewed. High, medium, and low-speed airfoil concepts are discussed, and some overall comparisons are made for different Reynolds number ranges.

Harvey, W. D.↗
NASA NTRS1988

Fifty years of laminar flow flight testing

Laminar flow flight experiments conducted over the past 50 years are reviewed. The emphasis is on flight testing conducted under the NASA Laminar Flow Control Program, which has been directed towards the most challenging technology application, the high-subsonic-speed transport. The F111/TACT NLF Glove Flight Test, the F-14 Variable-Sweep Transition Flight Experiment, the 757 Wing-Noise Survey and NLF Glove Flight Test, the NASA Jetstar Leading-Edge Flight Test Program, and the recently initiated Hybrid Laminar-Flow-Control Flight Experiment are discussed.

Wagner, R. D.↗
NASA NTRS1987

Application of superplastically formed and diffusion bonded aluminum to a laminar flow control leading edge

NASA sponsored the Aircraft Energy Efficiency (ACEE) program in 1976 to develop technologies to improve fuel efficiency. Laminar flow control was one such technology. Two approaches for achieving laminar flow were designed and manufactured under NASA sponsored programs: the perforated skin concept used at McDonnell Douglas and the slotted design used at Lockheed-Georgia. Both achieved laminar flow, with the slotted design to a lesser degree (JetStar flight test program). The latter design had several fabrication problems concerning springback and adhesive flow clogging the air flow passages. The Lockheed-Georgia Company accomplishments is documented in designing and fabricating a small section of a leading edge article addressing a simpler fabrication method to overcome the previous program's manufacturing problems, i.e., design and fabrication using advanced technologies such as diffusion bonding of aluminum, which has not been used on aerospace structures to date, and the superplastic forming of aluminum.

Goodyear, M. D.↗
NASA NTRS1989

Curvature effects on the stability of three-dimensional laminar boundary layers

The linear stability equations for compressible, three-dimensional laminar boundary layer flow are derived in an orthogonal curvilinear coordinate system. The system of equations is solved using a finite difference scheme in order to study the effects of streamline and surface curvature and compressibility on the stability of the flow past a swept wing. It is known that convex surface curvature can have a stabilizing effect on the laminar boundary layer. Conversely, concave surface curvature can be destabilizing. The magnitude of these effects for swept wings is determined. Results indicate that amplification rates and hence, N-factors, for the flow over the convex upper surface of a swept wing can be reduced by about 15 to 45 percent when curvature effects are included in the linear stability analysis. The results of the calculations show that concave curvature destabilizes crossflow type disturbances with a significant increase in amplification rate. In addition, comparisons are made with some experimental results on a swept concave-convex surface. Calculated velocity vector plots show good agreement with observed disturbances in the laminar boundary layer over the concave surface.

Collier, F. S., Jr.↗
NASA NTRS1987

Lockheed laminar-flow control systems development and applications

Progress is summarized from 1974 to the present in the practical application of laminar-flow control (LFC) to subsonic transport aircraft. Those efforts included preliminary design system studies of commercial and military transports and experimental investigations leading to the development of the leading-edge flight test article installed on the NASA JetStar flight test aircraft. The benefits of LFC on drag, fuel efficiency, lift-to-drag ratio, and operating costs are compared with those for turbulent flow aircraft. The current activities in the NASA Industry Laminar-Flow Enabling Technologies Development contract include summaries of activities in the Task 1 development of a slotted-surface structural concept using advanced aluminum materials and the Task 2 preliminary conceptual design study of global-range military hybrid laminar flow control (HLFC) to obtain data at high Reynolds numbers and at Mach numbers representative of long-range subsonic transport aircraft operation.

Lange, Roy H.↗