Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LHD DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

176 records · Page 10

Development of High-Power, Long-Pulse Gyrotrons and Its Application for High Electron Temperature, EBWH and ECCD Experiments on LHD

To sustain plasmas with higher parameters and with longer pulse duration in LHD, ECH system has been upgraded by introducing newly developed 77 GHz gyrotrons. The designed output power and operation duration time are over 1 MW for several seconds and 0.3 MW for continuous operation, respectively. Owing to the upgrade of gyrotrons and improved power supply operation procedure, total injection power of EC-waves to LHD increased up to 3.7 MW at the last LHD experimental campaign in 2010.Application of the high-power 77 GHz EC-waves of 3.4 MW as focused beams to the center of plasma with low line-average electron density of {approx}0.2x10{sup 19} m{sup -3} causes highly steep electron temperature profile and the central electron temperature reached up to 20 keV, which highly exceeds the former record of 15 keV. At higher density region of 1x10{sup 19} m{sup -3}, central electron temperature reached 8.6 keV.Additional electron Bernstein wave heatings, O-X-B and slow X-B heatings, using a 77 GHz ECH system caused clear increase in plasma stored energy even for the high-density plasmas over plasma cutoff (>7.35x10{sup 19} m{sup -3}) sustained with NBI. For the O-X-B scenario, the 77 GHz EC-wave was obliquely injected from low-field side in O-mode polarization, aiming at the point where high mode-conversion efficiency was expected. For realizing slow X-B scenario, new inner-vessel mirrors were installed in LHD just close to a helical coil, that is, at the high-field side (HFS) region. Using the inner-vessel mirror, X-mode waves were injected from HFS, showing evident increase in plasma stored energy.Oblique injection of long-pulse 0.77 MW/8 s 77 GHz wave with various N{sub ||} clearly demonstrated ECCD in LHD. The EC-driven current changes its direction with the sign of N{sub ||}, and the highest EC-driven current reached up to 42 kA.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vibrational States of Hydrogen Molecules in One Third LHD Negative Ion Source

The effect of the cesium on hydrogen negative ions is discussed using the vacuum ultraviolet emissions (VUV) from vibrational states of hydrogen molecules. The VUV spectrum from 90 to 165 nm is related to the H{sup -} production from the dissociative attachment of electrons to hydrogen molecules. The VUV spectra in hydrogen plasmas are measured in the extraction region of a negative ion source for neutral beam injector. Under the pure hydrogen discharge, the cesium vapor is introduced into the ion source to enhance the hydrogen negative ion density. When the same arc power of {approx}99 kW is applied in both with and without cesium admixture cases, the ratio of the observed VUV spectrum without to with cesium is not changed clearly. Therefore the production process of H{sup -} related to the wall/electrode surface would be enhanced rather than the volume production process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tomographic inversion techniques incorporating physical constraints for line integrated spectroscopy in stellarators and tokamaks

Accurate tomographic inversion is important for diagnostic systems on stellarators and tokamaks which rely on measurements of line integrated emission spectra. A tomographic inversion technique based on spline optimization with enforcement of constraints is described that can produce unique and physically relevant inversions even in situations with noisy or incomplete input data. This inversion technique is routinely used in the analysis of data from the x-ray imaging crystal spectrometer (XICS) installed at the Large Helical Device. The XICS diagnostic records a 1D image of line integrated emission spectra from impurities in the plasma. Through the use of Doppler spectroscopy and tomographic inversion, XICS can provide profile measurements of the local emissivity, temperature, and plasma flow. Tomographic inversion requires the assumption that these measured quantities are flux surface functions, and that a known plasma equilibrium reconstruction is available. In the case of low signal levels or partial spatial coverage of the plasma cross-section, standard inversion techniques utilizing matrix inversion and linear-regularization often cannot produce unique and physically relevant solutions. The addition of physical constraints, such as parameter ranges, derivative directions, and boundary conditions, allow for unique solutions to be reliably found. The constrained inversion technique described here utilizes a modified Levenberg-Marquardt optimization scheme, which introduces a condition avoidance mechanism by selective reduction of search directions. The constrained inversion technique also allows for the addition of more complicated parameter dependencies, for example, geometrical dependence of the emissivity due to asymmetries in the plasma density arising from fast rotation. The accuracy of this constrained inversion technique is discussed, with an emphasis on its applicability to systems with limited plasma coverage.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of a tunable Fabry-Perot etalon-based near-infrared interference spectrometer for measurement of the HeI 2{sup 3}S-2{sup 3}P spectral line shape in magnetically confined torus plasmas

In magnetically confined torus plasmas, the local emission intensity, temperature, and flow velocity of atoms in the inboard and outboard scrape-off layers can be separately measured by a passive emission spectroscopy assisted by observation of the Zeeman splitting in their spectral line shape. To utilize this technique, a near-infrared interference spectrometer optimized for the observation of the helium 2{sup 3}S–2{sup 3}P transition spectral line (wavelength 1083 nm) has been developed. The applicability of the technique to actual torus devices is elucidated by calculating the spectral line shapes expected to be observed in LHD and QUEST (Q-shu University Experiment with Steady State Spherical Tokamak). In addition, the Zeeman effect on the spectral line shape is measured using a glow-discharge tube installed in a superconducting magnet.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Alfvén mode induced particle loss in LHD

Herein losses of beam ions due to Alfvén modes are simulated for discharges in the Large Helical Device at Toki, Japan, using a guiding center code. High frequency beam particle resonances are found for the equilibria for passing particles, providing locations for the destablization of Alfvén modes observed in the device. Losses due to even small modes due to these resonances are significant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma-parameter dependence of ro-vibrational temperatures for H 2 in LHD divertor

We analyzed a thousand visible spectra of Fulcher-α band measured for divertor plasmas in Large Helical Device. With a coronal model and Bayesian inference, the population distribution of hydrogen molecule in the electronic ground state was estimated. The non-thermal population distribution was recovered with a two-temperature model, which has two sets of rotational and vibrational temperatures, as well as their mixture coefficient. The lower rotational temperature significantly changes according to the plasma parameters. Its nearly linear dependence on the electron density was found, which is consistent with previous works. The lower vibrational temperature also shows a small density dependence, as reported by a previous work. On the other hand, the higher rotational and vibrational temperatures as well as the mixture coefficient only show slight changes over the broad range of plasma parameters. These population parameters show a significant correlation; with higher electron density, all the temperatures and the fraction of the higher-temperature component increase simultaneously. In conclusion, this suggests that the electron impact plays an important role to determine the population distribution.

42 ENGINEERING↗

Global gyrokinetic simulations of electrostatic microturbulent transport in LHD stellarator with boron impurity

Abstract Global gyrokinetic simulations of electrostatic microturbulent transport for discharge # 166256 of the Large Helical Device stellarator in the presence of boron impurity show the co-existence of the ion temperature gradient (ITG) turbulence and trapped electron mode (TEM) turbulence before and during boron powder injection. ITG turbulence dominates in the core, whereas TEM dominates near the edge, consistent with the experimental observations. Linear TEM frequency increases from ∼ 80 kHz to ∼ 100 kHz during boron injection, and ITG frequency decreases from ∼ 20 kHz to ∼ 13 kHz, consistent with the experiments. The poloidal wave number spectrum is broad for both ITG (0–0.5 mm −1 ) and TEM (0–0.25 mm −1 ). The nonlinear simulations with boron impurity show a reduction in the heat conductivity compared to the case without boron. The comparison of the nonlinear transport before and during boron injection shows that the ion heat transport is substantially reduced in the region where the TEM is dominant. However, the average electron heat transport throughout the radial domain and the average ion heat transport in the region where the ITG is dominant are similar. The simulations with boron show the effective heat conductivity values qualitatively agree with the estimate obtained from the experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Line identification of boron and nitrogen emissions in EUV and VUV wavelength ranges in the impurity powder dropping experiments of LHD and its application to spectroscopic diagnostics

An impurity powder dropper was installed in the 21st campaign of the Large Helical Device experiment (Oct. 2019–Feb. 2020) under a collaboration between the National Institute for Fusion Science and the Princeton Plasma Physics Laboratory for the purposes of real-time wall conditioning and edge plasma control. In order to assess the effective injection of the impurity powders, spectroscopic diagnostics were applied to observe line emission from the injected impurity. Therefore, extreme-ultraviolet (EUV) and vacuum-ultraviolet (VUV) emission spectra were analyzed to summarize observable impurity lines with B and BN powder injection. Emission lines released from B and N ions were identified in the EUV wavelength range of 5–300 Å measured using two grazing incidence flat-field EUV spectrometers and in the VUV wavelength range of 300–2400 Å measured using three normal incidence 20 cm VUV spectrometers. BI–BV and NIII–NVII emission lines were identified in the discharges with the B and BN powder injection, respectively. Useful B and N emission lines which have large intensities and are isolated from other lines were successfully identified as follows: BI (1825.89, 1826.40) Å (blended), BII 1362.46 Å, BIII (677.00, 677.14, 677.16) Å (blended), BIV 60.31 Å, BV 48.59 Å, NIII (989.79, 991.51, 991.58) Å (blended), NIV 765.15 Å, NV (209.27, 209.31) Å (blended), NVI 1896.80 Å, and NVII 24.78 Å. Applications of the line identifications to the advanced spectroscopic diagnostics were demonstrated, such as the vertical profile measurements for the BV and NVII lines using a space-resolved EUV spectrometer and the ion temperature measurement for the BII line using a normal incidence 3 m VUV spectrometer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Global linear gyrokinetic simulation of energetic particle-driven instabilities in the LHD stellarator

Energetic particles are inherent to toroidal fusion systems and can drive instabilities in the Alfvén frequency range, leading to decreased heating efficiency, high heat fluxes on plasma-facing components, and decreased ignition margin. The applicability of global gyrokinetic simulation methods to macroscopic instabilities has now been demonstrated and it is natural to extend these methods to 3D configurations such as stellarators, tokamaks with 3D coils and reversed field pinch helical states. This has been achieved by coupling the GTC global gyrokinetic PIC model to the VMEC equilibrium model, including 3D effects in the field solvers and particle push. Here, this paper demonstrates the application of this new capability to the linearized analysis of Alfvénic instabilities in the LHD stellarator. For normal shear iota profiles, toroidal Alfvén instabilities in the n = 1 and 2 toroidal mode families are unstable with frequencies in the 75 to 110 kHz range. Also, an LHD case with non-monotonic shear is considered, indicating reductions in growth rate for the same energetic particle drive. Finally, since 3D magnetic fields will be present to some extent in all fusion devices, the extension of gyrokinetic models to 3D configurations is an important step for the simulation of future fusion systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparison of a 2D nonlocal transport model to ECRH experiments in LHD

In this work, a recently developed model of nonlocal transport in two dimensions (2D), the “iterative method”, is applied to the published results of ECRH experiments performed in the Large Helical Device. It is found from the temperature profiles obtained from the 2D model that the sharply peaked electron temperature profiles observed in such experiments, and previously associated with local transport and “internal transport barriers” or Core Electron-Root Confinement, are also consistent with nonlocal transport. It is shown that the iterative method is suited to handling both scenarios

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact of Magnetic Field Configuration on Heat Transport in Stellarators and Heliotrons

We assess the magnetic field configuration in modern fusion devices by comparing experiments with the same heating power, between a stellarator and a heliotron. The key role of turbulence is evident in the optimized stellarator, while neoclassical processes largely determine the transport in the heliotron device. Gyrokinetic simulations elucidate the underlying mechanisms promoting stronger ion scale turbulence in the stellarator. Similar plasma performances in these experiments suggests that neoclassical and turbulent transport should both be optimized in next step reactor designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of Energetic-Ion-Driven MHD Instabilities on Energetic-Ion-Transport in Compact Helical System and Large Helical Device

This paper describes 1) representative results on excitation of energetic-particle mode (EPM) and toroidicity-induced Alfven eigenmode (TAE) and consequent beam-ion losses in CHS, and 2) recent results on beam-ion transport and/or losses while EPMs are destabilized in LHD. Bursting EPMs and TAEs are often excited by co-injected beam ions in the high-beam ion pressure environment and give a significant effect on co-going beam ions in both experiments. It seems that in CHS, resonant beam ions are lost within a relatively short-time scale once they are anomalously transported due to energetic-ion driven MHD modes, whereas unlike CHS, redistribution of beam ions due to energetic-ion driven MHD modes is seen in LHD, suggesting that not all anomalously transported beam ions escape from the plasma.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Full-torus impurity transport simulation in boron powder injection experiments in the Large Helical Device

The toroidal distribution of boron deposition on plasma-facing components (PFCs) in boron powder injection using an impurity power dropper (IPD) was investigated by full-torus simulation and observations in a systematic plasma density-scan experiment. The images of the ablation of dropped boron powders observed with a visible CCD camera were consistently explained by the simulations of the ablation positions of the boron powders considering the size distribution. Simulations assuming full-torus boron deposition on the PFCs did not reproduce the observed intensity profile of boron emission lines for higher plasma densities. It indicated that the density of boron deposited on PFCs installed toroidally far from the IPD was low for higher plasma densities due to the change in the ablation positions of the boron powders toward the outboard side. The experimental results verified the previous full-torus simulation of the toroidal distribution of the boron deposition in both lower and higher plasma densities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of the TAEs’ saturation phase in the Large Helical Device: MHD burst

Here, the aim of the present study is to analyze the saturation regime of the toroidal Alfven eigenmodes (TAE) in the Large Helical Device plasma, particularly the MHD burst. The linear and nonlinear evolution of the TAEs are simulated by the FAR3d code that uses a reduced MHD model for the thermal plasma coupled with a gyrofluid model for the energetic particle (EP) species. The linear simulations indicate the overlapping of 1/2–1/1, 2/3–2/4 and 3/5–3/6 TAEs in the inner-middle plasma region and frequency range of 45–75 kHz, triggered by EPs with an energy of T f = 45 keV and EP β = 0.022. The nonlinear simulations show that 2/3–2/4 and 3/4–3/5 TAEs are further destabilized due to the energy transfer from the 1/1–1/2 TAE, leading to broad TAE radial overlapping and triggering of the MHD burst. The energy of the 1/1–1/2 TAE is also nonlinearly transferred to the thermal plasma destabilizing the 0/0 and 0/1 modes, inducing the generation of shear flows and zonal currents, as well as large deformations in the thermal pressure and EP density radial profiles. The nonlinear simulation reproduces the same succession of instabilities and the same frequency range with respect to the experiment. The instability propagates outward during the bursting phase, showing a large decrease of the EP density profile between the middle-outer plasma, indicating the loss of part of the EP population that explains the decrease in the plasma heating efficiency observed during the MHD burst.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗