Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “KC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Two Neptunium(III) Mellitate Coordination Polymers: Completing the Series Np–Cf of Trans-Uranic An(III) Mellitates

For this work, two neptunium(III) mellitates, 237 Np 2 (mell)(H 2 O) 9 ·1.5H 2 O (Np-1α) and 237 Np 2 (mell)(H 2 O) 8 ·2H 2 O (Np-1β), have been synthesized from 237 NpCl 4 (dme) 2 by reduction with KC 8 and subsequent reaction with an aqueous solution of mellitic acid (H 6 mell). Characterization by single-crystal X-ray crystallography and UV–vis–NIR spectroscopy confirms that the neptunium is in its +3 oxidation state and both polymorphs are isostructural to the previously reported plutonium mellitates. Of the two morphologies, Np-1α is indefinitely stable in air, while Np-1β slowly oxidizes over several months. This is due to the change in the energy of the metal-ligand charge-transfer absorption exhibited by these compounds attributed to differing numbers of carboxylate bonds to Np(III), where in Np-1β the energy is low enough to result in spontaneous oxidation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Ring-Opening in the Actinide Cyclopropyl Complexes [Cp 3 U(2,2-Diphenylcyclopropyl)] n – ( n = 0, 1)

The reaction of [Cp 3 UCl] with in situ generated 1-lithium-2,2-dipenylcyclopropane results in the formation of [Cp 3 U(2,2-diphenylcyclopropyl)] (1) in good yield. Reduction of 1 with KC 8 , in the presence of 2.2.2-cryptand, results in the formation of a rare U(III) alkyl complex, [K(2.2.2-cryptand)][Cp 3 U(2,2-diphenylcyclopropyl)] (2). Thermolysis or photolysis of 1 for 10 d in toluene results in isomerization to the U(IV) η 1 -allyl complex, [Cp 3 U(η 1 -3,3-diphenylallyl)] (3). Moreover, photolysis of 2 in THF for 9 h at room temperature results in isomerization to the U(III) η 1 -allyl complex, [K(2,2,2-cryptand)][Cp 3 U(η 1 -3,3-diphenylallyl)] (4). Both 3 and 4 were fully characterized. Additionally, selective labeling of the C α positions of 1 and 2 with deuterium revealed that cyclopropyl ring-opening occurs via distal C–C bond cleavage via a hypothesized η 3 -allyl intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The Curious Case of [AnH(NR 2 ) 3 ] (An = Th, U; R = SiMe 3 ): Two Monomeric Actinide Hydrides Revisited

The reaction of AnCl 4 (DME) x (An = Th, x = 2; An = U, x = 0) with 4 equiv of NaNR 2 (R = SiMe 3 ) in THF at 65 °C results in the formation of [An{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (An = U, 1; An = Th, 2), and not the reported monomeric actinide hydrides, [AnH(NR 2 ) 3 ], as expected. Furthermore, both complexes 1 and 2 were characterized by X-ray crystallography. Surprisingly, their unit cell parameters are remarkably close to those reported for [AnH(NR 2 ) 3 ], suggesting that the original crystals of [AnH(NR 2 ) 3 ] were, in fact, [An{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ], but were misidentified. Reduction of 1 with 1.1 equiv of KC 8 in THF, in the presence of 1 equiv of 2.2.2-cryptand, results in the formation of [K(2.2.2-cryptand)][U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (3) in good yield. Likewise, the reaction of 1 with 1 equiv of bis(diisopropylamino)cyclopropenylidene (BAC) results in the formation of the BAC adduct, [(BAC)U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (4), in moderate yield. Finally, the addition of H 2 (10 bar) to 2 in C 6 D 6 at room temperature results in the formation of the targeted monomeric hydride, [ThH(NR 2 ) 3 ], in 32% yield, according to integrations against an internal standard. However, removal of the H 2 atmosphere results in rapid reformation of 2. In contrast, the addition of H 2 (10 bar) to 1 in C 6 D 6 at room temperature results in no apparent reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Uranium-Mediated Peroxide Activation and a Precursor toward an Elusive Uranium cis -Dioxo Fleeting Intermediate

The activation of chalcogen–chalcogen bonds using organometallic uranium complexes has been well documented for S–S, Se–Se, and Te–Te bonds. In stark contrast, reports concerning the ability of a uranium complex to activate the O–O bond of an organic peroxide are exceedingly rare. Herein, we describe the peroxide O–O bond cleavage of 9,10-diphenylanthracene-9,10-endoperoxide in nonaqueous media, mediated by a uranium(III) precursor [(( Me,Ad ArO) 3 N)U III (dme)] to generate a stable uranium(V) bis-alkoxide complex, namely, [(( Me,Ad ArO) 3 N)U V (DPAP)]. This reaction proceeds via an isolable, alkoxide-bridged diuranium(IV/IV) species, implying that the oxidative addition occurs in two sequential, single-electron oxidations of the metal center, including rebound of a terminal oxygen radical. Furthermore, this uranium(V) bis-alkoxide can then be reduced with KC 8 to form a uranium(IV) complex, which upon exposure to UV light, in solution, releases 9,10-diphenylanthracene to generate a cyclic uranyl trimer through formal two-electron photooxidation. Analysis of the mechanism of this photochemical oxidation via density functional theory (DFT) calculations indicates that the formation of this uranyl trimer occurs through a fleeting uranium cis-dioxo intermediate. At room temperature, this cis-configured dioxo species rapidly isomerizes to a more stable trans configuration through the release of one of the alkoxide ligands from the complex, which then goes on to form the isolated uranyl trimer complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A [CoSiH 2 ] Silylene Synthon Provides Modular Access to Homo- and Heterobimetallic [Co=Si=M] (M = Co, Fe) Silicide Complexes

Base-stabilized [BP 3 iPr ](H) 2 CoSiH 2 (DMAP) (1, [BP 3 iPr ] = PhB(CH 2 P i Pr 2 ) 3 – ; DMAP = 4-dimethylaminopyridine) is a rare instance of a synthon for the simplest “parent” silylene complex (LM=SiH 2 ). Complex 1 was accessed in high yields via double Si–H bond activation in SiH 4 by [BP 3 iPr ]Co(DMAP), and in solution, it undergoes rapid exchange between bound and free DMAP by an associative mechanism (as determined by variable-temperature 1 H NMR dynamic studies). The DMAP ligand of 1 is readily displaced by metal-based fragments that bind silicon and cleave the Si–H bonds of the SiH 2 moiety to produce bimetallic [Co=Si=M] (M = Co, Fe) molecular silicides. Thus, treatment of 1 with 0.5 equiv of (LCo I ) 2 (μ-N 2 ) (L = a tripodal ligand) resulted in the spontaneous formation of [BP 3 iPr ](H) 2 Co=Si=Co(H) 2 L (L = [BP 2 tBu Pz], PhB(CH 2 P t Bu 2 ) 2 (pyrazolyl) - (3); Tp", HB(3,5-diisopropylpyrazolyl) 3 – (4)) with the concomitant release of DMAP. The symmetrical silicide [BP 3 iPr ](H) 2 Co=Si=Co(H) 2 [BP 3 iPr ] (5) was prepared by treatment of a mixture of 1 and [BP 3 iPr ]Co(DMAP) with 2 equiv of Ph 3 B, which in this case is required to sequester DMAP as the elimination product Ph 3 B-DMAP. A heterobimetallic silicide, [BP 3 iPr ](H) 2 Co=Si=Fe(H) 2 [SiP 3 iPr ] (7; [SiP 3 iPr ] = PhSi(CH 2 P i Pr 2 ) 3 ), was obtained via in situ KC 8 reduction of [SiP 3 iPr ]FeCl and subsequent addition of 1 and Ph 3 B. These transformations involving a metal–SiH 2 derivative demonstrate a fundamentally new type of reactivity for silylene complexes and provide a unique synthetic method for construction of molecular silicide complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Hydrophobic pockets built in polymer micelles enhance the reactivity of Cu 2+ ions

We report the hydrophobicity-enhanced reactivity of Cu2+ ions as an ester hydrolase. Using a dipicolylamine (DPA) containing reversible addition–fragmentation chain transfer agent, the synthetic sequence, either hydrophobic or hydrophilic first in amphiphilic block copolymers of polystyrene-block-poly(N'N-dimethylacrylamide) (PS-b-PDMA), was varied to control the location of the binding motif, DPA, in the hydrophobic core or on the hydrated corona of polymer micelles. The hydrophobicity of Cu 2+ sites showed a significant impact (as large as 60 times more activity) on their catalytic efficiency towards ester hydrolase. With two different kinetic modes, including Michaelis–Menten and the reverse saturation kinetics models, the binding constant Kb of the substrates to Cu 2+ sites were quantitatively analyzed and we demonstrate that hydrophobicity favors the binding of the substrates to Cu2+ sites at polymer micelles with smaller sizes, however, K b decays exponentially with micellar diameters. Despite the diffusion barrier, hydrophobicity shows a profound impact on the catalytic rate constant kc that measures the single conversion rate of bound substrates to products. There is a 16–20 times kinetic enhancement in the hydrolase activity, completely endowed by the hydrophobic microenvironment of Cu 2+ sites compared to micelles with similar sizes. Our results indicate how the hydrophobicity of Cu 2+ -containing micelles can impact the catalytic efficiency and potentially illustrate a promising way toward the design of bioinspired catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

C sp 2 –H/F bond activation and borylation with iron

Reduction of [K 2 {( tBu pyrr 2 pyr)Fe} 2 (μ-N 2 )] (1) with two equiv. of KC 8 in the presence of crown-ether 18-C-6 yields the N 2 adduct [{K(18-C-6)} 2 ( tBu pyrr 2 pyr)Fe(N 2 )] (2). Complex 2 heterolytically splits the C sp 2 –H bond of benzene to form [{K(18-C-6)}( tBu pyrr 2 pyr)Fe(C 6 H 5 )] (3), whereby usage of a diboron B 2 pin 2 promotes hydride elimination to form the salt [K(18-C-6)HB 2 Pin 2 ] (4). Similarly, 3 can also be formed by cleavage of the C–F bond of fluorobenzene. Reaction of 3 with ClBcat yields [K(18-C-6)(thf) 2 ][( tBu pyrr 2 pyr)FeCl] (5) and PhBcat and the former can be reduced to 2 to complete a synthetic cycle for heterolytic benzene C–H activation and borylation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Four-electron oxidation and one-electron reduction of the bis(terphenylthiolate) U( II ) complex, U(SAr iPr6 ) 2 [Ar iPr6 = C 6 H 3 -2,6-(C 6 H 2 -2,4,6- i Pr 3 ) 2 ]

Here, the utility of the sterically bulky terphenylthiolate ligand, (SAr iPr6 ) 1− in expanding uranium reductive chemistry has been explored. Reduction of U(SAr iPr6 ) 2 I forms the U(II) complex, U(SAr iPr6 ) 2 , in which the metal is protected by the flanking arene rings of the ligand, but they move out of the way to accommodate the four electron reduction of PhN=NPh to form the U(VI) bis(imido) product U(SAr iPr6 ) 2 (=NPh) 2 (THF) 2 . Here, the KC 8 reduction of U(SAr iPr6 ) 2 generates a more reduced complex, KU(μ-SAr iPr6 ) 2 , initially identified by a −2.55 V vs. Fc + /Fc electrochemical reduction event in THF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Magnetic structure, excitations and short-range order in honeycomb Na 2 Ni 2 TeO 6

Na 2 Ni 2 TeO 6 has a layered hexagonal structure with a honeycomb lattice constituted by Ni 2+ and a chiral charge distribution of Na + that resides between the Ni layers. In the present work, the antiferromagnetic transition temperature of Na 2 Ni 2 TeO 6 is confirmed at TN˜ 27 K, and further, it is found to be robust up to 8 T magnetic field and 1.2 GPa external pressure; and, without any frequency-dependence. Slight deviations from nominal Na-content (up to 5%) does not seem to influence the magnetic transition temperature, TN. Isothermal magnetization curves remain almost linear up to 13 T. Our analysis of neutron diffraction data shows that the magnetic structure of Na 2 Ni 2 TeO 6 is faithfully described by a model consisting of two phases described by the commensurate wave vectors vec kc, (0.5 0 0) and (0.5 0 0.5), with an additional short-range order component incorporated in to the latter phase. Consequently, a zig-zag long-range ordered magnetic phase of Ni 2+ results in the compound, mixed with a short-range ordered phase, which is supported by our specific heat data. Theoretical computations based on density functional theory (DFT) predict predominantly in-plane magnetic exchange interactions that conform to a J1-J2-J3 model with a strong J3 term. The computationally predicted parameters lead to a reliable estimate for TN and the experimentally observed zig-zag magnetic structure. A spin wave excitation in Na 2 Ni 2 TeO 6 at E ˜ 5 meV at T = 5 K is mapped out through inelastic neutron scattering experiments, which is reproduced by linear spin wave theory calculations using the J values from our computations. Our specific heat data and inelastic neutron scattering data strongly indicate the presence of short-range spin correlations, at T > TN, stemming from incipient antiferromagnetic clusters.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Identification of therapeutic targets in a murine model of severe exertional heat stroke

Exertional heat stroke (EHS) is a potentially lethal condition resulting from high core body temperatures (T C ) in combination with a systemic inflammatory response syndrome (SIRS) with varying degrees of severity across victims, and limited understanding of the underlying mechanism(s). We established a mouse model of severe EHS to identify mechanisms of hyperthermia/inflammation that may be responsible for organ damage. Mice were forced to run on a motorized wheel in a 37.5°C chamber until loss of consciousness and were either removed immediately (exertional heat injury or EHI; T CMax = 42.4 ± 0.2°C) or remained in the chamber an additional 20 min (EHS; T CMax = 42.5 ± 0.4°C). Exercise control mice (ExC) experienced identical procedures to EHS at 25°C. At 3 h post-EHS, there was evidence for an immune/inflammatory response as elevated blood chemokine [interferon γ-induced protein 10 (IP-10), keratinocytes-derived chemokine (KC), macrophage inflammatory proteins (MIP-1α), MIP-1β, MIP-2] and cytokine [granulocyte colony-stimulating factor (G-CSF), interleukins (IL-10), IL-6] levels peaked and were highest in EHS mice compared with EHI and ExC mice. Immunoblotting of organs susceptible to EHS damage indicated that several kinases were sensitive to stress associated with heat/inflammation and exercise; specifically, phosphorylation of liver c-Jun NH 2 -terminal kinase (JNK) at threonine 183/tyrosine 185 immediately (0 h) postheating related to heat illness severity. We have established a mouse EHS model, and JNK [or its downstream target(s)] could underlie EHS symptomatology, allowing the identification of molecular pathways or countermeasure targets to mitigate heat illness severity, enable complete recovery, and decrease overall EHS-related fatalities.

Physiology↗
DOE OSTI2023

Tree damage and mortality measurements across seven ForestGEO plots in the tropics between Oct 2016 and Mar 2023

Annual records (raw data) on tree survival and structural completeness of 36,524 trees (2,467 species) collected across 29 censuses in seven tropical forests distributed across the Neotropics (Amacayacu, Colombia; Barro Colorado Island (BCI), Panamá; Yasuní, Ecuador) and Asia (Fushan, Taiwan; Huai Kha Khaeng (HKK), Thailand; Khao Chong (KC), Thailand; Pasoh, Malaysia). This dataset was used to compare aboveground biomass loss via damage to living trees relative to total AGB loss (mortality + damage). Variable definitions: site: name of the ForestGEO plot stemID.ams: Unique ID for the stem in the annual mortality surveys (ams) treeID.ams: Unique ID for the tree in the ams date.full.census: date of the previous full census of the plot, format: YYYY-MM-DD dbh.full.census: diameter at the breast height (dbh in mm) measured during the previous full census of the plot home: height of measurement of dbh (in m) meanWD: species-level wood density (g cm-3) date.ams: date of the ams, format: YYYY-MM-DD status: survival status of the tree (A: alive; D: dead; NF: not found; "?": unknown) H_considering_damage: living length of the main axis in meters; provides an estimate of the amount of remaining living tissues along the main axis of the stem (e.g., the height of breakage or the height discounting wood decay) b: the remaining proportion of branch volume within the living length (b∈[0,1]). weights.ind: frequency of the [size class x species] bins within the forest plot relative to their frequency in the sample. Necessary to extrapolate estimates to the whole plot.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Preface to the Focus Section on Geophysical Observations of the OSIRIS-REx Sample Return Capsule Re-Entry

Here, this focus issue of Seismological Research Letters compiles observational results and theoretical interpretations related to the OSIRIS-REx SRC re-entry and multidisciplinary analyses highlighting broader scientific applications of such events (Carr et al., 2025; Clemente et al., 2025; Fernando et al., 2025; KC et al., 2025; Silber and Bowman, 2025). The articles contribute toward a geophysical understanding of how hypersonic objects interact with Earth’s atmosphere and how generated acoustic waves propagate through the atmosphere and couple into the ground as measurable seismic signals.

58 GEOSCIENCES↗
DOE OSTI2026

An R&D program for milliampere spin-polarized electron beams

The electron injector driving the positron conversion target for Ce+BAF requires a spin-polarized beam with at least 1 mA of average current. While the parameters are not unusual from a beam dynamics point of view, the high average current is challenging due to the finite charge lifetime of the GaAs-based high-polarization photocathodes, even when operated in state-of-the-art load-lock photo-guns. We discuss the dominant limitations and present a systematic experimental program at the Gun Test Stand aiming to overcome them. With a multi-pronged approach involving a redesign of the photo-gun electrodes and an optimized drive laser profile, we hope to demonstrate a charge lifetime in excess of 1 kC from a high-polarization photocathode, mitigating one of the main risks in the injector design.

Bruker, Max [Thomas Jefferson National Accelerator↗
DOE OSTI2021

NUMERICAL CALCULATION OF LOSSES OF TRAPPED VORTICES UNDER STRONG RF MEISSNER CURRENT AND DC SUPERHEATING FIELD IN TYPE II SUPERCONDUCTORS

Research on the vortex dynamics and enhancing of superheating field in superconductors has attracted much attention in accelerator physics community to develop next-generation high-performance accelerator cavities. However, the extreme dynamics of curvilinear elastic vortices driven by very strong currents close to the depairing limit or superheating field of a superconductor with a nanostructured surface has not been well understood. We calculated the superheating field Hsh and critical momentum kc characterizing the wavelength of the instability ?m of the Meissner state to flux penetration by solving numerically the Ginzburg?Landau equations. A bulk superconductor, superconductor with the inhomogeneous surface disorder (S-S), and multilayered surface (S-I-S) have been thoroughly investigated in this work. Our result showed that S-S and S-I-S structures can enhance the superheating field well above their clean limit. In this work extensive numerical simulation of the power dissipated by an oscillating vortex segment driven by the surface ac Meissner currents was performed. Our simulations take into account the nonlinear vortex line tension, vortex mass, Bardeen?Stephen viscous vortex drag applicable at low fields, and nonlinear Larkin-Ovchinnikov (LO) viscous drag coefficient ?(v) at high fields and pinning force. We showed that the LO decrease of ?(v) with the vortex velocity v could radically change the field dependence of the surface resistance Ri(H) caused by trapped vortices. At low frequencies Ri(H) exhibits a conventional increase with H. However, as frequency increases, the surface resistance becomes a nonmonotonic function of H which decreases with H at higher fields irrespective of the pinning distribution. Overheating can mask the descending field dependence of Ri(H) as frequency increases. Our numerical simulations also show that the LO effect can cause a vortex bending instability at high field amplitudes and frequencies, giving rise to the formation of dynamic kinks along with the vortex when a vortex is pinned strongly to one end. Nonlinear losses of trapped vortices in thick films under high-amplitude RF fields as functions of frequency, mean free path and pinning characteristics have been calculated.

Pathirana, Walive↗
NASA NTRS1964

Radio Noise Problems in Arctic Regions

Three main types of radio noise should be considered when establishing noise levels for communication purposes or in experiments utilizing radio techniques in Arctic regions. These are atmospheric and man-made noise, and precipitation static. National Bureau of Standards radio noise data obtained hourly at Arctic and Antarctic stations on eight .fixed frequencies between 51 kc and 20 Mc/s are analyzed to show the characteristics of the three types. The diurnal and seasonal variations of atmospheric radio noise at high latitudes are explainable in terms of changes in propagation factors and in the distribution of world thunderstorm activity. In both northern and southern Arctic regions atmospheric noise decreases during polar cap absorption (PCA), most markedly in the h.f. band. The probable magnitude of man-made noise in the h.f. band is estimated from data taken during PCA, when atmospheric noise is absent. At Thule man-made noise on 2.5 and 5 Mc/s appears to be 57 and 49 dB above kTB (where kTB is antenna thermal noise power), respectively, while at Byrd Station the values are about 20 and 12 dB respectively. Precipitation static is generated on exposed antennas during periods of blowing snow (blizzards). The noise power magnitude can be at least 50 dB above man-made and atmospheric levels, but the maximum enhancement cannot be ascertained because of missing data. In winter and spring months at Byrd Station radio data dependent upon exposed antennas may be lost 10-30 per cent of the time due to precipitation static alone.

Radio Noise↗
NASA NTRS1972

Low gravity processing of immiscible materials.

Description of the procedures followed and results obtained in low-gravity processing experiments conducted during the Apollo 14 mission and on two NASA-operated short-duration low gravity facilities. The discussed experiments include the Apollo-14 composite casting demonstration, the Marshall Space Flight Center drop tower tests, and the KC-135 Aircraft/M512 Facility tests. Future low gravity experiments are pointed out.

Reger, J. L.↗
NASA NTRS1973

Research study of materials processing in space Experiment M512

Ground based studies of two proposed experiments which were to be conducted aboard the Skylab Laboratory are reported; metals melting experiment, and sphere forming experiment. These studies were conducted with the objectives of clarifying the effects of gravity and optimizing the experiments within the constraints of existing hardware. All process phenomena were considered, with particular attention given to adhesion-cohesion studies with emphasis on the fluid dynamics of the molten metal. Detailed thermal histories were generated for three-dimensional specimen geometry including radiation, conduction and vaporization losses with allowances for variable properties. In addition quantitative techniques were used to establish the gravitational level (magnitude and direction) for KC-135 aircraft flights and the actual Skylab mission for both experiments.

Brashears, M. R.↗