Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOTHERMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Non-isothermal Crystallization Kinetics of Mold Fluxes for Casting High-Aluminum Steels

This paper investigates the crystallization behavior of CaO-SiO{sub 2}- and CaO-Al{sub 2}O{sub 3}-based mold fluxes for casting high-aluminum steels using single hot thermocouple technology, developed kinetic models, and scanning electron microscope. The results showed that the crystallization ability of the typical CaO-SiO{sub 2}-based Flux A (CaO/SiO{sub 2} 0.62, Al{sub 2}O{sub 3} 2 mass pct) is weaker than that of CaO-Al{sub 2}O{sub 3}-based Flux B (CaO/SiO{sub 2} 4.11, Al{sub 2}O{sub 3} 31.9 mass pct) because of its higher initial crystallization temperature. The crystallization kinetics of Flux A was “surface nucleation and growth, interface reaction control” in the overall non-isothermal crystallization process, whereas that of Flux B was “constant nucleation rate, 1-dimensional growth, diffusion control, in the primary crystallization stage, and then transformed into constant nucleation rate, 3-dimensional growth, interface reaction control in the secondary crystallization stage.” The energy dispersive spectroscopy results for Flux B suggested that the variations in the crystallization kinetics for Flux B are due to different crystals precipitating in the primary (BaCa{sub 2}Al{sub 8}O{sub 15}) and secondary (CaAl{sub 2}O{sub 4}) crystallization periods during the non-isothermal crystallization process.

36 MATERIALS SCIENCE↗

A detailed reaction mechanism for oxidative coupling of methane over Mn/Na 2 WO 4 /SiO 2 catalyst for non-isothermal conditions

Direct production of ethylene from natural gas or other methane sources has proven to be challenging from catalytic, process design and economic perspectives, with no reports of a commercially viable process to date. Understanding of the underlying non-ideal homogeneous and heterogeneous reactions involved could lead to success, enabling utilization of vast natural gas resources as a replacement for petrochemicals. In this regards, an improved reaction mechanism and computational model, validated experimentally, for oxidative coupling of methane (OCM) over a Mn/Na 2 WO 4 /SiO 2 catalyst is developed, taking into account the non-isothermal behavior exhibited by the gas and surface reactions. The reaction mechanism involves detailed gas-phase and surface elementary steps to describe the OCM chemistry and employing a reduced model for computational efficiency. Our model uses laboratory-scale packed-bed reactor experiments for kinetic mechanism development. The modeling and simulation is particularly focused on a one-dimensional packed-bed reactor. The kinetic model is validated over a wide range of experimental conditions. The model-predicted results and their comparisons with the experimental data are presented wide temperature ranges and methane-to-oxygen feed ratios under adiabatic reactor conditions. The kinetic model is first of its kind in which non-isothermal OCM kinetic behavior is captured using detailed gas-phase and heterogeneous reaction kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into mixing of non-isothermal multi-polymer melts for complex plastics recycling

Catalytic recycling or upcycling of plastics is often limited not by catalyst performance, but by transport, arising from highly viscous, non-Newtonian polymer melts. In this work, we develop a reactor-scale framework that integrates rheological measurements, constitutive modeling, computational fluid dynamics (CFD), and experiments to quantify mixing, heat transfer, and dispersion in surrogate hydrocarbon melts representing mixed plastics systems. Temperature- and shear rate-dependent viscosity of low-density polyethylene (LDPE) and high-density polyethylene (HDPE) is measured to create two surrogate polymers (PLD and PHD) that capture the dominant shear-thinning flow behavior while neglecting strong elastic effects, enabling tractable simulation of non-isothermal, polymer-melt mixing using a Carreau-Arrhenius generalized Newtonian framework. Three-dimensional CFD simulations are employed to evaluate impeller performance in PLD using mixing time, cavern volume, thermal uniformity, and interfacial area for regimes in which viscoelastic effects are not dominant. We show that magnetic stir bars commonly used in lab-scale studies produce large thermal gradients (~60 °C) and poor mixing, even under idealized power delivery and polymer flow conditions. In contrast, close-clearance anchor impellers achieve near-isothermal operation, reduce mixing times by up to 5×, and provide >90% active circulation volume. We further demonstrate that, at low pseudo-Deborah number (De*), motor power requirements can be predicted directly from shear rate-dependent rheology using the Carreau-Arrhenius framework, enabling rational selection of operating conditions. Extension to surrogate immiscible multi-polymer systems based on PLD and PHD shows that interfacial area is highly sensitive to operating conditions and impeller design, with coaxial anchor-turbine configurations enhancing dispersion by up to 4 × .

Close-clearance impellers↗

Non-isothermal melting of ice in the gas-diffusion layer of a proton-exchange-membrane fuel cell

Non-isothermal ice melting in the fibrous gas-diffusion layer (GDL) of a proton-exchange-membrane fuel cell (PEMFC) is investigated using differential scanning calorimetry (DSC). Non-isothermal ice-melting rates and ice-melting times are obtained from heat-flow measurements in water-saturated Toray GDLs at heating rates of 1, 2.5, 5, 10, and 25 K/min. In all cases, ice-melting times decrease nonlinearly with increasing heating rate. Nevertheless, melting temperatures remain at 272.9 ± 0.5 and 272.7 ± 0.4 K for bulk ice and ice within the GDL, respectively, reiterating that melting is thermodynamic-based at a rate limited by heat transfer. The slight GDL ice melting-point depression is consistent with the Gibbs-Thomson equation for equilibrium melting using an average pore diameter of 30 μm. Ice-melting endotherms are predicted from overall DSC energy balances coupled with a moving-boundary Stefan problem, where an ice-melting front within a GDL propagates with volume-averaged properties through an effective medium. Agreement between DSC experiment and theory is excellent. The proposed model accurately predicts ice-melting endotherms for Toray GDLs with two ice saturations and for bulk ice. Further, a pseudo-steady-state analysis obtains an analytical expression for ice-melting time, which is controlled by the time for heat addition to the propagating solid/liquid interface. Significantly, the new expression elucidates parameters controlling ice melting and allows for better design of both GDL materials and heating strategies to enhance the success of PEMFC cold-start.

25 ENERGY STORAGE↗

Isothermal decomposition kinetics of nickel (II) hydroxide powder

In this work, nickel (II) hydroxide powder was investigated by thermogravimetry for isothermal decomposition kinetics and verification of the Ni–O–H ternary phase diagram at low temperatures. The activation energy and frequency factor were measured as $E_a$ = 134 kJ/mol and A = 1.27 × 10 10 s –1 , respectively. The validity of the first-order random nucleation model was confirmed, as opposed to diffusion and or moving-boundary models. The dependence of TGA results on specimen size was noted. The Ni–Ni(OH) 2 –NiO phase triangle was confirmed. Accordingly, a thermodynamic description of the system was established in the Ni-rich corner, and the isotherm at room temperature is calculated.

36 MATERIALS SCIENCE↗

Isothermal nitridation kinetics of TiSi{sub 2} powders

The aim of the present work is to determine the kinetics of reaction between TiSi{sub 2} powder and gaseous nitrogen. Isothermal nitridation of TiSi{sub 2} powders with fine (1.4 µm) and medium (4.5 µm) particle size has been studied in pure nitrogen atmosphere from 1000 to 1200 °C for duration up to 50 h. The isothermal nitridation kinetics of TiSi{sub 2} powders were investigated by thermogravimetry. The nitridation rate strongly depends on the particle size and temperature. Smaller size particle exhibits higher nitridation rate due to its larger surface area. The conversion process is complex with nucleation and growth of TiN at the surface of the grain and Si{sub 3}N{sub 4} inside the grain promoted by the Kirkendall effect with an influence of the volume increase. - Graphical abstract: Backscattered electrons image of a transverse TiSi{sub 2} grain nitrurated at 1100 °C for 50 h. - Highlights: • Influence of grain size on TiSi{sub 2} powder nitridation. • Influence of temperature on TiSi{sub 2} powder nitridation. • Experimental measurements of the nitridation kinetics. • An explanation of the nitridation mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Depressing effect of 0.1 wt.% Cr addition into Sn-9Zn solder alloy on the intermetallic growth with Cu substrate during isothermal aging

In this paper, the effect of 0.1 wt.% Cr addition into Sn-9Zn lead-free solder alloys on the growth of intermetallic compound (IMC) with Cu substrate during soldering and subsequent isothermal aging was investigated. During soldering, it was found that 0.1 wt.% Cr addition did not contribute to forming the IMC, which was verified as the same phase structure as the IMC for Sn-9Zn/Cu. However, during solid-state isothermal aging, the IMC growth was remarkably depressed by 0.1 wt.% Cr addition in the Sn-9Zn solder, and this effect tended to be more prominent at higher aging temperature. The activation energy for IMC growth was determined as 21.2 kJ mol{sup -1} and 42.9 kJ mol{sup -1} for Sn-9Zn/Cu and Sn-9Zn-Cr/Cu, respectively. The reduced diffusion coefficient was confirmed for the 0.1Cr-containing solder/Cu. Energy-dispersive X-ray mapping and point analysis also showed ZnCr phase existing in solder matrix, which can reduce diffusion rate of Zn atoms.

36 MATERIALS SCIENCE↗

Crystallographic orientation variation of isothermal pearlite under high magnetic field

Crystallographic orientation (CO) variation of magnetic-induced pearlite (MIP) during its microstructure evolution in 19.8 T was investigated by electron back-scatter diffraction (EBSD). It is closely related to the isothermal temperatures (ITs) and the applied magnetic time (MT) during the process of MIP formation. The <100> easy magnetization direction in MIP colonies is strengthened with the MT within the certain transformed fraction of MIP (f{sub MIP}) at the relatively lower IT (983 K) above the eutectoid temperature but below the magnetically shifted upward eutectoid temperature, while this special CO tends to be weakened at a relatively higher IT (995 K). For the same MT, the higher the IT, the relatively larger is the proportion in <100> orientation for MIP colonies at the early growth stage. These results have demonstrated that the change of <100> orientation of MIP is closely related to the growth rate of pearlite ferrite (PF), and strengthened mainly at early transformation stage. When f{sub MIP} reaches some value, the growth rate of MIP at other COs, such as <110>, even at the hard magnetization direction, turns to present speed-up. - Highlights: • HMF can induce pearlite with different fractions above the eutectoid temperature. • CO is closely related to isothermal temperatures and applied magnetic time. • <100> direction is related to the growth rate of PF, and strengthened at early stage. • When f{sub MIP} reaches some value, the growth rate at other COs turns to present speed-up.

36 MATERIALS SCIENCE↗

Studies on the kinetics of β → α phase transformation in 47Zr–45Ti–5Al–3V alloy under isothermal conditions by X-ray diffraction

The kinetics of the β → α phase transformation in the 47Zr–45Ti–5Al–3V (wt.%) alloy with different initial β grain sizes under isothermal conditions was investigated by X-ray diffraction. The results showed that the volume fraction of α phase first increased with increasing aging time, and then reached an equilibrium value. The equilibrium value of α phase decreased with increased aging temperature. At the same aging temperature and time, the volume fraction of α phase in the 47Zr–45Ti–5Al–3V alloy solution-treated at 850 °C was higher than at 1050 °C, and the size of α phase in the 47Zr–45Ti–5Al–3V alloy solution-treated at 850 °C was larger than that at 1050 °C. The kinetics of the β → α phase transformation was modeled under isothermal conditions in the theoretical frame of the Johnson–Mehl–Avrami–Kolmogorov (JMAK) theory. The Avrami index (n) increased with increasing aging temperature, while the reaction rate constant (k) decreased. - Highlights: • The kinetics of the β → α phase transformation in the ZrTiAlV alloy was investigated. • The volume fraction of α phase first increased and then reached an equilibrium value. • The kinetics of the β → α phase transformation was modeled by the JMAK theory. • The n increased with increasing aging temperature, while the k decreased.

36 MATERIALS SCIENCE↗

Isothermal and cyclic oxidation behaviours of MoSi2 with additions of B at 1250 °C prepared by spark plasma sintering

Highlights: • A Mo-Si-B alloy is obtained when fine Mo-Si-B powder is sintered. • SPS Mo-Si-B alloy consists of fine MoSi{sub 2}, Mo{sub 2}B{sub 5}, MoB and SiO{sub 2} phases. • Increasing B content reduces incubation stage of oxide layer but increases mass gain. • SPS sample made from finer alloy powder has better oxidation resistance. • Spilling of SiO{sub 2} in SPS sample acts as a “Mechanical locking” on oxide layer. - Abstract: Mo-Si-B alloys were obtained by spark plasma sintering (SPS) using Mo-57Si-10B and Mo-52Si-15B alloy powders, and the effects of the B content and powder size on the isothermal and cyclic oxidation behaviours of the Mo-Si-B alloys at 1250 °C were investigated. A SiO{sub 2} phase was introduced during the SPS process and the Mo-Si-B alloys consisted of a fine MoSi{sub 2}/Mo{sub 2}B{sub 5}/MoB/SiO{sub 2} microstructure. Under isothermal and cyclic oxidation conditions, the kinetic curves of the SPS Mo-Si-B alloys exhibited parabolic time dependence on the weight gain. The increase in the nominal B caused a decrease in the incubation stage of the formation of continuously protective borosilicate layer but increased the mass gain due to the higher fluidity of the borosilicate layer. The SiO{sub 2} phase was found to supply the borosilicate layer with a “Mechanical locking” mechanism through the spilling of the SiO{sub 2} phase in the SPS samples, especially under the cyclic oxidation condition.

36 MATERIALS SCIENCE↗

Examining the multi-scale complexity and the crystallographic hierarchy of isothermally treated bainitic and martensitic structures

In this work, differences and similarities between bainitic and martensitic structures obtained by isothermal heat treatments such as austempering, quench and partitioning (Q&P) and quench and tempering (Q&T), are investigated by multiple techniques including X-ray diffraction, electron backscatter diffraction, scanning and transmission electron microscopy and atom probe tomography. Additionally, results reveal that analogous lath-like ferritic structures with similar austenite content can be achieved by adjusting the isothermal holding temperature. However, certain variability in hardness is recorded, which is consistent with differences on the precipitation state revealed by the nano-scale examination of the structure, and with dissimilar crystallographic size distribution of ferritic grains.

36 MATERIALS SCIENCE↗

Prediction of softening kinetics and recrystallization texture in non-isothermally annealed bulged tubes using CPFEM and CA models

A hierarchically coupled cellular automata (CA) model, crystal plasticity finite element method (CPFEM), and thermal finite element (FE) model is developed to predict the softening kinetics of the bulged steel tube during non-isothermal annealing. Through the developed model, the kinetics of softening mechanisms including static recovery (SRV) and static recrystallization (SRX), as well as the recrystallization texture are predicted. Later, the Johnson-Mehl-Avrami-Kohnogorov (JMAK) model based on the predicted SRX data is developed to interpret the recrystallization behavior of the material. To perform this study, diverse experimental tests including tube hydroforming (THF), annealing, uniaxial tensile test, hardness test, as well as microstructure observations through optical microscopy and Electron Backscatter Diffraction (EBSD) tests on steel tube are performed. The obtained experimental data are utilized to calibrate and verify the implemented CPFEM model for simulation of THF process, thermal FE model for prediction of the local temperature over annealing time, and CA algorithm for modeling of the softening kinetics and texture evolution throughout the annealing process. The study shows that the predicted deformation characteristics, softening kinetics, recrystallization texture and temperature profile during non-isothermal annealing are in good agreement with experimental data. During the annealing process, a total of four stages for the kinetics of softening mechanisms is observed: No softening; SRV only; SRV dominant; and SRX dominant. During the progress of SRX, the behavior of recrystallization is abruptly changed, confirming that two different mechanisms are controlling the kinetics of transformation.

36 MATERIALS SCIENCE↗

Silica Nanoparticle-Induced Structural Reorganizations in Pulmonary Surfactant Films: What Monolayer Compression Isotherms Do Not Say

The interaction of nanoparticles (NPs) with pulmonary surfactant is important for understanding the potential adverse effects of inhaled engineered and incidental nanomaterials. The effects of a low concentration (0.001 wt %) of charged, hydrophilic silica NPs of hydrodynamic diameter of ~20 nm on the phase behavior and lateral structure of lipid-only and naturally derived surfactant monolayers were investigated at the air/water interface using surface pressure–area isotherms and Brewster angle microscopy, respectively. Atomic force microscopy was used to image the morphology of films transferred onto mica substrate with nanometer resolution. We show herein that the silica NPs can significantly alter the condensed domain size and shape even in the absence of apparent differences in the monolayer compression isotherms. The cationic particles notably induce structural and morphological progressions in a binary model containing anionic phosphoglycerol that are similar to those observed for the natural surfactant film that contains cationic proteins. These findings specifically highlight the impact of the NP charge on the phase transformations in pulmonary surfactant, with implications for the engineering of nanomaterials for commercial use and bioapplications.

membrane organization↗

Isothermal evaporation of a-pinene ozonolysis SOA: volatility, phase state, and oligomeric composition

We present measurements of the isothermal evaporation of a-pinene ozonolysis secondary organic aerosol (SOA). Using a novel, filter-based method, we replicate previous findings of the volume fraction remaining, presented here as carbon number weighted signal fraction remaining (SFR), as a function of evaporation time. We apply two detailed physical models to interpret the evaporative behavior of both the bulk SOA and individual components. Both models find that a combination of effectively non-volatile products, together with reversible oligomers (or otherwise reactive monomers) having a decomposition lifetime of 9 to 28 hours, best explains the evolution of composition and volatility as particles age in the absence of both organic vapors and oxidants, even under an assumption of relatively viscous (soft wax-like) particles. We find that the residence time in the SOA formation chamber, and time spent undergoing isothermal evaporation, both indicative of the physical age of the aerosol, are the most important experimental parameter determining the evaporation rate. The evolution of volatility observed in these experiments is compared to field measurements in a boreal forest site. The ambient monoterpene-dominated SOA volatility is only reproduced in the laboratory after 24 hours of extended aging in a dilute, dark, oxidant-free environment.

D'Ambro, Emma↗

Isothermal Ice Crystallization Kinetics in the Gas-Diffusion Layer of a Proton-Exchange-Membrane Fuel Cell

Nucleation and growth of ice in the fibrous gas-diffusion layer (GDL) of a proton-exchange membrane fuel cell (PEMFC) are studied using isothermal differential scanning calorimetry (DSC). Isothermal crystallization rates and pseudo-steady-state nucleation rates are obtained as a function of subcooling from heat-flow and induction-time measurements. Kinetics of ice nucleation and growth are studied at two polytetrafluoroethylene (PTFE) loadings (0 and 10 wt %) in a commercial GDL for temperatures between 240 and 273 K. A nonlinear ice-crystallization rate expression is developed using Johnson–Mehl–Avrami–Kolmogorov (JMAK) theory, in which the heat-transfer-limited growth rate is determined from the moving-boundary Stefan problem. Induction times follow a Poisson distribution and increase upon addition of PTFE, indicating that nucleation occurs more slowly on a hydrophobic fiber than on a hydrophilic fiber. The determined nucleation rates and induction times follow expected trends from classical nucleation theory. Finally, a validated rate expression is now available for predicting ice-crystallization kinetics in GDLs.

30 DIRECT ENERGY CONVERSION↗

A Multiscale Approach to Simulate Non‐Isothermal Multiphase Flow in Deformable Porous Materials

Coupled thermal, hydraulic, and mechanical processes in porous materials play important roles in several energy and environmental technologies. The Darcy-Brinkman-Biot (DBB) framework has proven effective in modeling multiphase fluid flow in deformable porous solids across both pore and Darcy scales, including in systems where fractures coexist with a porous matrix. In this study, we extend the DBB framework, originally designed for isothermal conditions, to address non-isothermal problems by incorporating an energy conservation equation. The resulting solver, hybridBiotThermalInterFoam, enables simulations of coupled multiphase fluid flow, heat transfer, and solid deformation in hybrid-scale systems containing both solid-free regions and ductile porous domains. The new solver is validated through comparisons with analytical solutions and, also, against established heat transfer solvers chtMultiRegionFoam and compressibleInterFoam. Further, a series of 2D and 3D case studies, including two-phase heat transfer in solid-free, static, or deformable porous media, highlights the solver's capacity to simulate complex flow dynamics and heat transport in systems involving high mobility ratios, viscous fingering, and fracture propagation. Our results establish the feasibility of incorporating thermal effects in simulations of a wide variety of energy geotechnics and environmental applications, including enhanced hydrocarbon recovery, soil remediation, and enhanced geothermal energy systems.

04 OIL SHALES AND TAR SANDS↗

Structure of iso-density sets in supersonic isothermal turbulence

Context: The gas density structure of the cold molecular phase of the interstellar medium is the main controller of star formation. Aims: A theoretical framework is proposed to describe the structural content of the density field in isothermal supersonic turbulence. Methods: It makes use of correlation and structure functions of the phase indicator field defined for different iso-density values. The relations between these two-point statistics and the geometrical features of iso-density sets such as the volume fraction, the surface density, the curvature, and fractal characteristics are provided. An exact scale-by-scale budget equation is further derived revealing the role of the turbulent cascade and dilation on the structural evolution of the density field. Although applicable to many flow situations, this tool is here first invoked for characterising supersonic isothermal turbulence, using data from the currently best-resolved numerical simulation. Results: We show that iso-density sets are surface fractals rather than mass fractals, with dimensions that markedly differ between dilute, neutral, and dense regions. The surface–size relation is established for different iso-density values. We further find that the turbulent cascade of iso-density sets is directed from large towards smaller scales, in agreement with the classical picture that turbulence acts to concentrate more surface into smaller volumes. Intriguingly, there is no range of scales that complies with a constant transfer rate in the cascade, challenging our fundamental understanding of interstellar turbulence. Finally, we recast the virial theorem in a new formulation drawing an explicit relation between the aforementioned geometrical measures and the dynamics of iso-density sets.

79 ASTRONOMY AND ASTROPHYSICS↗

Finite Element Modeling of a Non-Isothermal Superplastic-Like Forming Process

Conventional superplastic forming (SPF) has been modified to increase the productivity and reduce some of the drawbacks, such as high forming temperature and high percentage thinning, to suit the automotive industries. One of the modifications was to combine between the conventional SPF and the use of a mechanical preformed blank to form the non-superplastic grade aluminum alloy (AA5083-O). The requirement of high temperature usually results in microstructural defects during forming process. In this paper, finite element modeling was adopted to investigate the superplastic-like forming process using the non-isothermal heating system. In the simulation, two phases (mechanical pre-forming and gas blow for ming) of the process were conducted under different temperatures, where the material was mechanically drawn into the die cavity at 200 deg. C in the first phase, and it formed with gas pressure applied at a global temperature increasing from 400 deg. C to 500 deg. C. Because of the non-isothermal heating of material, it was found that it had enough ductility to flow more easily in the specific zones (die corners and radius). Additionally, FEM results showed that a better formed part can be obtained by the increasing temperature forming, compared to the stable temperature phase.

36 MATERIALS SCIENCE↗