Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRON OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

A mineralized zone in Western Candor Chasma, Mars

Spectral evidence from Viking and Phobos orbiting spacecraft suggests the local development of crystalline ferric oxides in a small region within Mars' equatorial Valles Marineris canyon system. This is the same area noted for its anomalous coloration in Viking Orbiter image 583 A by McEwen. The unique hue of the region in Viking color data is due to a reduced green filter reflectance, relative to violet and red, in comparison to surrounding materials of similar albedo or average reflectance. For this reason, the region does not appear spectrally distinctive in later Survey Mission images which were acquired without the green filter. In high resolution, the spectral unit can be seen to correspond to two 20 km long depressions on the margins of Candor Mensa, a heavily eroded plateau-forming deposit on the canyon floor. Laminae are conspicuous in several places on the plateau, particularly where 15 to 20 cycles of alternating bright and dark laminae are exposed at approximately 200 meter vertical intervals. Laminae are also visible on the steep, vertically fluted cliffs to the south of this depression. Concentric laminae indicate a basis in the depression on the southeastern margin of Candor Mensa at the location of the less pronounced hue anomaly. A distinct lineation at the base of the scarp at the western end of the canyon transects mottled canyon floor deposits believed to be among the youngest in the Valles marineris. Water is implicated in the formation of the iron oxides, since the steep surfaces of layered sediments elsewhere on Candor Mensa show no evidence of unusual coloration despite the fact that these materials were deposited concurrently with the strata exposed in the depressions. This suggests that the mineralization is secondary in nature and developed locally in association with the depressions, which could have ponded surface runoff or groundwater seepage.

Geissler, P. E.↗

Magnetic fluid readily controlled in zero gravity environment

Colloid composed of finely ground iron oxide in a fluid such as heptane, is controlled and directed magnetically in a zero gravity environment. It will not separate on standing for long periods or after exposure to magnetic or centrifugal forces. Because of its low density and low viscosity, it is easily pumped.

Papell, S. S.↗

The geometrical analysis of partial fusion

Geometrical analysis of partial fusion in earth crust and mantle formation, discussing solid solution and boundaries in MgO-iron oxide- silicon dioxide system

Presnall, D. C.↗

Experimental methods for geological remote sensing

During the past year a two channel IR technique for discrimination among silicate rocks was tested for a second time, a three channel IR method was tested for the first time, and a new visible-reflective IR ratio method was hypothesized and qualitatively tested for iron oxide recognition. Both the two channel and three channel IR ratios methods were capable of discriminating felsic from mafic rock types. The three-channel ratio values measured by the scanner were found to agree, within reasonable limits, with the values of R calculated from laboratory data. The capability of the three channel method to obtain absolute ratios is accompanied by a costly processing routine. The two channel technique is superior for low thermal contrast scenes about which some ground truth is available because of its speed and economy.

Vincent, R. K.↗

Spectral ratio imaging methods for geological remote sensing from aircraft and satellites

The author has identified the following significant results. The production of ratio images from multispectral scanner data is described and several examples of ratio images from aircraft and ERTS-1 data are given for visible, reflective infrared, and thermal infrared wavelengths. The application of photogrammetric techniques to ratio images, defined for this paper as ratio scannergrammetry, is considerably aided by the lesser dependence of ratio images on atmospheric and solar illumination variations, compared with single channel scanner imagery or aerial photos. Ratio scannergrammetry is further aided by the proportionality between ratios of a target deduced from ratio images and ratios of reflectances calculated from laboratory spectra of samples from the target area. Consequently, ratios calculated from laboratory data can be used to predict which ratios are best for discriminating a given rock or mineral, to predict what other rocks or minerals will be confused with it, and finally, to place ratio scannergrammetry on an absolute basis, within an estimated standard error on the order of 5% to 10%. Examples of relative agreement between laboratory data and ratio images are given from two iron oxides, hematite and magnetite.

Vincent, R. K.↗

An ERTS multispectral scanner experiment for mapping iron compounds.

An experiment is described which is designed to produce visible-reflective infrared ratio images from ERTS satellite data. The ERTS-A multispectral scanner has two channels in the visible-reflective infrared wavelength region which should be capable of duplicating aircraft scanner results. The average reflectances in the four ERTS-A MSS spectral bands for a few minerals and some vegetation are tabulated. The mineral laboratory samples were granular, with a particle diameter range of 250 to 1200 micrometer. If there were no spectral atmospheric or illumination variation effects, the ratio of energies in band 1 to band 4 would permit discrimination of pyroxenes (found in basic and ultrabasic rocks), quartz (found in acidic rocks), limonite and hematite (iron oxides), and green vegetation, on the basis of their respective ratio magnitudes.

Vincent, R. K.↗

Thermochemical water decomposition processes

Thermochemical processes which lead to the production of hydrogen and oxygen from water without the consumption of any other material have a number of advantages when compared to other processes such as water electrolysis. It is possible to operate a sequence of chemical steps with net work requirements equal to zero at temperatures well below the temperature required for water dissociation in a single step. Various types of procedures are discussed, giving attention to halide processes, reverse Deacon processes, iron oxide and carbon oxide processes, and metal and alkali metal processes. Economical questions are also considered.

Chao, R. E.↗

Thermomagnetic analysis of meterorites. 4: Ureilites

Samples of all available ureilites have been analyzed thermomagnetically. For three of the six (Dyalpur, Goalpara and Havero) evidence was found for only low-nickel metallic-iron as the magnetic component and the (saturation magnetization vs, temperature) curves were reversible. In the Novo Urei ureilite, magnetite in addition to low-nickel metallic-iron was indicated and again the Js-T curve was reversible. For the two badly weathered ureilites, Dingo Pup Donga and North Haig, indication was also found that both initial magnetite and low-nickel metallic-iron were present. However, the Js-T curves were somewhat irreversible and the final saturation magnetization was 20% and 50% greater than initially for North Haig and Dingo Pup Donga, respectively. This behavior is interpreted to be the result of magnetite production from a secondary iron oxide during the experiment.

Rowe, M. W.↗

Surface compositional mapping by spectral ratioing of ERTS-1 MSS data in the Wind River Basin and Range, Wyoming

The author has identified the following significant results. ERTS data collected in August and October 1972 were processed on digital and special purpose analog recognition computers using ratio enhancement and pattern recognition. Ratios of band-averaged laboratory reflectances of some minerals and rock types known to be in the scene compared favorably with ratios derived from the data by ratio normalization procedures. A single ratio display and density slice of the visible channels of ERTS MSS data, Channel 5/Channel 4 (R5,4), separated the Triassic Chugwater formation (redbeds) from other formations present and may have enhanced iron oxide minerals present at the surface in abundance. Comparison of data sets collected over the same area at two different times of the year by digital processing indicated that spectral variation due to environmental factors was reduced by ratio processing.

Vincent, R. K.↗

The effects of the physical and chemical properties of soils on the spectral reflectance of soils

The effects of organic matter, free iron oxides, texture, moisture content, and cation exchange capacity on the spectral reflectance of soils were investigated along with techniques for differentiating soil orders by computer analysis of multispectral data. By collecting soil samples of benchmark soils from the different climatic regions within the United States and using the extended wavelength field spectroradiometer to obtain reflectance values and curves for each sample, average curves were constructed for each soil order. Results indicate that multispectral analysis may be a valuable tool for delineating and quantifying differences between soils.

Montgomery, O. L.↗

D/H and O-18/O-16 ratios of H2O in the 'rusty' breccia 66095 and the origin of 'lunar water'

A number of the rocks brought back from the Apollo 16 mission had a faint 'rusty' coating. It has been suggested that this coating might be hydrated iron oxide. A study was conducted of a sample of the lunar rock 66095, on which the 'rusty' coating was particularly prominent. An analysis showed that the sample contained between 20 and 40 micromoles of water per gram of rock. Taking into account aspects of isotopic composition and other factors, it is concluded that the water found in the analysis is probably not of lunar origin.

Epstein, S.↗

Mineral target areas in Nevada from geological analysis of LANDSAT-1 imagery

Geological analysis of LANDSAT-1 Scene MSS 1053-17540 suggests that certain known mineral districts in east-central Nevada frequently occur near faults or at faults or lineament intersections and areas of complex deformation and flexures. Seventeen (17) areas of analogous characteristics were identified as favorable targets for mineral exploration. During reconnaissance field trips eleven areas were visited. In three areas evidence was found of mining and/or prospecting not known before the field trips. In four areas favorable structural and alteration features were observed which call for more detailed field studies. In one of the four areas limonitic iron oxide samples were found in the regolith of a brecciated dolomite ridge. This area contains quartz veins, granitic and volcanic rocks and lies near the intersection of two linear fault structures identified in the LANDSAT-1 imagery. Semiquantitative spectroscopic analysis of selected portions of the samples showed abnormal contents of arsenic, molybdenum, copper, lead, zinc, and silver. These limonitic samples found were not in situ and further field studies are required to assess their source and significance.

Abdel-Gawad, M.↗

Fault tectonics and earthquake hazards in parts of southern California

The author has identified the following significant results. Four previously unknown faults were discovered in basement terrane of the Peninsular Ranges. These have been named the San Ysidro Creek fault, Thing Valley fault, Canyon City fault, and Warren Canyon fault. In addition fault gouge and breccia were recognized along the San Diego River fault. Study of features on Skylab imagery and review of geologic and seismic data suggest that the risk of a damaging earthquake is greater along the northwestern portion of the Elsinore fault than along the southeastern portion. Physiographic indicators of active faulting along the Garlock fault identifiable in Skylab imagery include scarps, linear ridges, shutter ridges, faceted ridges, linear valleys, undrained depressions and offset drainage. The following previously unrecognized fault segments are postulated for the Salton Trough Area: (1) An extension of a previously known fault in the San Andreas fault set located southeast of the Salton Sea; (2) An extension of the active San Jacinto fault zone along a tonal change in cultivated fields across Mexicali Valley ( the tonal change may represent different soil conditions along opposite sides of a fault). For the Skylab and LANDSAT images studied, pseudocolor transformations offer no advantages over the original images in the recognition of faults in Skylab and LANDSAT images. Alluvial deposits of different ages, a marble unit and iron oxide gossans of the Mojave Mining District are more readily differentiated on images prepared from ratios of individual bands of the S-192 multispectral scanner data. The San Andreas fault was also made more distinct in the 8/2 and 9/2 band ratios by enhancement of vegetation differences on opposite sides of the fault. Preliminary analysis indicates a significant earth resources potential for the discrimination of soil and rock types, including mineral alteration zones. This application should be actively pursued.

Merifield, P. M.↗

Closed system Fischer-Tropsch synthesis over meteoritic iron, iron ore and nickel-iron alloy

Experiments were performed in which meteoritic iron, iron ore and nickel-iron alloy were used to catalyze (in Fischer-Tropsch synthesis) the reaction of deuterium and carbon monoxide in a closed vessel. Normal alkanes and alkenes and their monomethyl substituted isomers and aromatic hydrocarbons were synthesized. Iron oxide and oxidized-reduced Canyon Diablo used as Fischer-Tropsch catalysts were found to produce aromatic hydrocarbons in distributions having many of the features of those observed in carbonaceous chondrites, but only at temperatures and reaction times well above 300 C and 6-8 h.

Nooner, D. W.↗

Results of analyses performed on soil adjacent to penetrators emplaced into sediments at McCook, Nebraska, January 1976

During 1976 several penetrators (full and 0.58 scale) were dropped into a test site McCook, Nebraska. The McCook site was selected because it simulated penetration into wind-deposited sediments (silts and sands) on Martian plains. The physical and chemical modifications found in the sediment after the penetrators' impact are described. Laboratory analyses have shown mineralogical and elemental changes are produced in the sediment next to the penetrator. Optical microscopy studies of material next to the skin of the penetrator revealed a layer of glassy material about 75 microns thick. Elemental analysis of a 0-1-mm layer of sediment next to the penetrator revealed increased concentrations for Cr, Fe, Ni, Mo, and reduced concentrations for Mg, Al Si, P, K, and Ca. The Cr, Fe, Ni, and Mo were in fragments abraded from the penetrator. Mineralogical changes occurring in the sediment next to the penetrator included the introduction of micron-size grains of alpha iron and several hydrated iron oxide minerals. The newly formed silicate minerals include metastable phases of silica (cristobalite, lechatelierite, and opal). The glassy material was mostly opal which formed when the host minerals (mica, calcite, and clay) decomposed. In summary, contaminants introduced by the penetrator occur up to 2 mm away from the penetrator's skin. Although volatile elements do migrate and new minerals are formed during the destruction of host minerals in the sediment, no changes were observed beyond the 2-mm distance. The analyses indicate 0.58-scale penetrators do effectively simulate full-scale testing for soil modification effects.

Blanchard, M.↗

Mineralogic and petrologic implications of Viking geochemical results from Mars - Interim report

Chemical results from four samples of Martian fines delivered to Viking landers 1 and 2 are remarkably similar in that they all have high iron; moderate magnesium, calcium, and sulfur; low aluminum; and apparently very low alkalies and trace elements. This composition is best interpreted as representing the weathering products of mafic igneous rocks. A mineralogic model, derived from computer mixing studies and laboratory analog preparations, suggests that Mars fines could be an intimate mixture of about 80% iron-rich clay, about 10% magnesium sulfate (kieserite), about 5% carbonate (calcite), and about 5% iron oxides (hematite, magnetite, maghemite, goethite). The mafic nature of the present fines (distributed globally) and their probable source rocks seems to preclude large-scale planetary differentiation of a terrestrial nature.

Baird, A. K.↗