Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Higher Ion Selectivity with Lower Energy Usage Promoted by Electro-osmotic Flow in the Transport through Conical Nanopores

The tradeoff between selectivity and throughput presents fundamental challenges to improve desalination and charge storage, salinity gradient-based energy harvesting, memory device/circuit development, and so forth. The well-known ion-current rectification and the recently resolved time-dependent transport hysteresis in conical nanopores or asymmetric nanointerfaces offer new opportunities for the selective transport of matter. This report shows that electro-osmotic flow (EOF) is an overlooked factor that increases ion selectivity while maintaining enhanced transport throughput in rectified nanoscale electrokinetic transport. The increased selectivity originates primarily from the suppression of anion flux by the fluid flow in the opposite direction under the applied electrical field. By solving the Poisson and Nernst–Planck (PNP) equations without and with coupled Navier–Stokes (PNP–NS) equations, the EOF effects on cation and anion transport are unequivocally revealed in asymmetric nanopipettes. The flux of cations and anions as well as the transference number and flow velocity are elucidated using the models and boundary conditions validated by previous experiments. A dimensionless parameter, radius over the Debye length, reveals optimal ion selectivity and energy cost at intermediate ion concentrations and nanopore sizes, up to hundreds of millimolars and tens of nanometers under time-dependent potential stimulus. Furthermore, the fundamental insights into EOF at nanointerfaces suggest new routes/strategies for better separation, analysis, and energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ion Solvation Engineering: How to Manipulate the Multiplicity of the Coordination Environment of Multivalent Ions

During free energy analysis of solvation structures of free divalent cations, their ion pairs, and neutral aggregates in low dielectric solvents reveals the multiplicity of thermodynamically stable cation solvation configurations and identifies the micro- and macroscopic factors responsible for this phenomenon. Specifically, we show the role of ion-solvent interactions and solvent mixtures in determining the cation solvation free energy landscapes. We show that it is the entropic contribution of solvent degrees of freedom that is responsible for the solvation multiplicity, and the mutual balance between enthalpic and entropic forces or their concerted contributions is what ultimately defines the most stable ion solvation configuration and creates new ones. We show general consequences of ion solvation multiplicity on thermodynamics of complex electrolytes, specifically in the context of homogeneous or interfacial charge transfer. Identified factors and their interplay provide a pathway to formulation of solvation design rules that can be used to control bulk solvation, interfacial chemistry, and charge transfer. Our findings also suggest experimentally testable predictions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Improving the Comprehensive Performance of Na 0.7 MnO 2 for Sodium Ion Batteries by ZrO 2 Atomic Layer Deposition

Sodium ion batteries with Na-Mn-O compounds as cathode have been widely studied as substitutes for lithium ion batteries due to their abundant resources. Still, the relatively poor cycling stability and low capacity of Na-Mn-O compounds significantly limit their applications. Different approaches, including element substitution and surface modification, have been applied to improve the electrochemical performance of those cathode materials. Herein, element doping and coating of ZrO 2 on Na 0.7 MnO 2 particles have been achieved by atomic layer deposition (ALD) followed by post-annealing. The rate capability and cycling stability of the modified material were significantly improved, and the mechanism of performance enhancement was revealed. The ZrO 2 coatings acted as a stable interfacial layer to enhance the cycling stability of Na 0.7 MnO 2 by suppressing side reactions between the electrode and electrolyte. The doping of transition metal ions reduced energy barriers for sodium ion insertion and deintercalation during cycling, further improving the charge and discharge capacity and rate performance of Na 0.7 MnO 2 .

25 ENERGY STORAGE↗
DOE OSTI2024

Elucidating the Gas-Phase Behavior of Nitazene Analog Protomers Using Structures for Lossless Ion Manipulations Ion Mobility-Orbitrap Mass Spectrometry

2-benzylbenzimidazoles, or “nitazenes”, are a class of novel synthetic opioids (NSOs) that are increasingly being detected alongside fentanyl analogs and other opioids in drug overdose cases. Nitazenes can be 20x more potent than fentanyl but are not routinely tested for during postmortem or clinical toxicology drug screens; thus, their prevalence in drug overdose cases may be under-reported. Traditional analytical workflows utilizing liquid chromatography-tandem mass spectrometry (LC-MS/MS) often require additional confirmation with authentic reference standards to identify a novel nitazene. However, additional analytical measurements with ion mobility spectrometry (IMS) may provide a path towards reference-free identification, which would greatly accelerate NSO identification rates in toxicology labs. Presented here are the first IMS and collision cross section (CCS) measurements on a set of fourteen nitazene analogs using a Structures for Lossless Ion Manipulations (SLIM)-Orbitrap MS. All nitazenes exhibited two high intensity baseline-separated IMS distributions, which fentanyls and other drug and drug-like compounds also exhibit. Incorporating water into the electrospray ionization (ESI) solution caused the intensities of the higher mobility IMS distributions to increase the intensities of the lower mobility IMS distributions to decrease. Nitazenes lacking a nitro group at the R1 position exhibited the greatest shifts in signal intensities due to water. Furthermore, IMS-MS/MS experiments showed that the higher mobility IMS distributions of all nitazenes produced fragment ions with m/z 72, 100, and other low intensity fragments while the lower mobility IMS distributions only produced fragment ions with m/z 72 and 100. The IMS, solvent, and fragmentation studies provide experimental evidence that nitazenes potentially exhibit three gas-phase protomers. In conclusion, the cyclic IMS capability of SLIM was also employed to partially resolve four sets of structurally similar nitazene isomers (e.g., protonitazene/isotonitazene, butonitazene/isobutonitazene/secbutonitazene), showcasing the potential of using high-resolution IMS separations in MS-based workflows for reference-free identification of emerging nitazenes and other NSOs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Design strategies for nonaqueous multivalent-ion and monovalent-ion battery anodes

The inability of current battery technologies to keep up with the performance requirements of industry is pushing forward developments in electrochemistry. Specifically, the battery's negative electrode, the anode, presents many unique chemical, physical and engineering challenges. Lithium-based battery technologies have dominated the past decade, but concerns about the limited supply of lithium in the Earth's crust have led researchers to look towards alternative metal-ion technologies. Furthermore, various alkali metals (such as sodium and potassium) and alkali earth metals (such as magnesium and calcium) have attracted significant research interest. In this Review, we analyse these technologies in a coherent manner, addressing the problems of each type of anode, rather than those of specific types of metal-ion batteries. Covering direct metal plating and stripping, intercalation-based, alloy-based and conversion-reaction-based anode technologies, this analysis will offer the reader a comprehensive understanding of the behaviour of different metal-ion anodes and of what can be learned by transferring knowledge between these different systems. Increasing demand for energy-storage systems will inevitably stress the Earth's lithium supply; thus, the research focus is shifting towards other alkali and alkali earth metals. In summary, this Review compares and connects strategies to enable different multivalent and monovalent metal-ion battery anodes, including metal anodes and intercalation-based, alloy-based and conversion-reaction-based anodes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Review of Swift Heavy Ion Irradiation Effects in CeO2

Cerium dioxide (CeO2) exhibits complex behavior when irradiated with swift heavy ions. Modifications to this material originate from the production of atomic-scale defects, which accumulate and induce changes to the microstructure, chemistry, and material properties. As such, characterizing its radiation response requires a wide range of complementary characterization techniques to elucidate the defect formation and stability over multiple length scales, such as X-ray and neutron scattering, optical spectroscopy, and electron microscopy. In this article, recent experimental efforts are reviewed in order to holistically assess the current understanding and knowledge gaps regarding the underlying physical mechanisms that dictate the response of CeO2 and related materials to irradiation with swift heavy ions. The recent application of novel experimental techniques has provided additional insight into the structural and chemical behavior of irradiation-induced defects, from the local, atomic-scale arrangement to the long-range structure. However, future work must carefully account for the influence of experimental conditions, with respect to both sample properties (e.g., grain size and impurity content) and ion-beam parameters (e.g., ion mass and energy), to facilitate a more direct comparison of experimental results.

42 ENGINEERING↗
DOE OSTI2024

Chemo-Mechanical Instabilities in Lithium Cobalt Oxide at Higher State-Of-Charge in Li-Ion Batteries

Transition metal oxide cathodes are widely used in commercial Li-ion batteries. However, their practical charge capacity is limited due to severe chemo-mechanical instabilities at higher charge voltage, and state-of-charge condition. Here, in situ stress and strain measurements were synchronized to probe mechanical deformations in the lithium cobalt oxide (LCO) cathode via a multi-beam stress sensor and digital image correlation, respectively. In situ mechanical measurements revealed how Li removal from the electrode structure induces deformations on the LCO composite cathodes during cycling. The structure and morphology of the LCO cathodes were further investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM) studies. Two distinct electrochemical and mechanical behaviors were identified when the LCO was charged up to 4.65 V. The LCO undergoes a compressive stress generation when charged up to 4.2 V and surface fractures on the LCO particles were detected by SEM. LCO cathode experienced significantly large contractions (negative strains) when charged up to 4.65 V, where intergranular crack formation and phase transformation were detected on the LCO particles via SEM and XRD, respectively. Overall, the study bridges complicated structural deformations with in situ analysis of mechanical degradations in LCO cathodes charged at higher voltages. The correlation is vital to understanding instability mechanisms in transition metal oxides at high voltages for alkali metal ion batteries.

higher state-of-charge↗
DOE OSTI2021

Direct Cathode Recycling of End-Of-Life Li-Ion Batteries Enabled by Redox Mediation

The ongoing surge of electric vehicle (EV) adoption forecasts an unprecedented amount of lithium-ion battery wastes in the near future. Since cathode materials have the highest economic and engineering values, it is essential to recycle and reuse the end-of-life (EOL) cathode materials. Here, we show that redox mediators can deliver lithium ions and electrons from a lithium source to the cathode, efficiently relithiate the EOL cathode materials, and make them ready for new battery production after a postheat treatment. We have found that some quinone-based redox mediators, especially 3,5-di-tert-butyl-o-benzoquinone (DTBQ), can shuttle the charges very fast between Li metal and EOL cathode. Reduction of DTBQ on lithium is evidenced by chemical changes of Li metal and DTBQ, and successful relithiation of the EOL cathode by the subsequent oxidation of DTBQ is verified by electrochemical and structural evaluations.

battery recycling↗
DOE OSTI2022

Ion complexation waves emerge at the curved interfaces of layered minerals

Abstract Visualizing hydrated interfaces is of widespread interest across the physical sciences and is a particularly acute need for layered minerals, whose properties are governed by the structure of the electric double layer (EDL) where mineral and solution meet. Here, we show that cryo electron microscopy and tomography enable direct imaging of the EDL at montmorillonite interfaces in monovalent electrolytes with ångstrom resolution over micron length scales. A learning-based multiple-scattering reconstruction method for cryo electron tomography reveals ions bound asymmetrically on opposite sides of curved, exfoliated layers. We observe conserved ion-density asymmetry across stacks of interacting layers in cryo electron microscopy that is associated with configurations of inner- and outer-sphere ion-water-mineral complexes that we term complexation waves. Coherent X-ray scattering confirms that complexation waves propagate at room-temperature via a competition between ion dehydration and charge interactions that are coupled across opposing sides of a layer, driving dynamic transitions between stacked and aggregated states via layer exfoliation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Computational and experimental search for potential polyanionic K-ion cathode materials

Discovering high-energy cathode materials is critical to construct K-ion batteries for practical applications. Owing to the great success of layered oxides in Li- and Na-ion systems, K layered cathodes have also been investigated in recent years. However, the much larger size of K + compared to Li or Na introduces strong K + –K + interaction within the layer, which results in a sloped voltage profile thereby limiting the specific capacity and operating voltage. In contrast, polyanionic materials with a three-dimensional K + arrangement can effectively mitigate K + –K + interaction. In this work, ten K polyanionic compounds with theoretical capacity >100 mA h g –1 are screened from the Inorganic Crystal Structure Database as potential cathode materials for K-ion batteries. Among the ten proposed compounds, K 2 MnP 2 O 7 , K 2 Mn 2 P 2 O 7 F 2 , K 2 Fe 2 P 2 O 7 F 2 , and K 6 V 2 (PO 4 ) 4 with average voltage <4.5 V are synthesized and evaluated electrochemically. While the re-insertion of K into these compounds is not fully reversible, it may be related to the very high migration barrier that we compute for K ions. In addition, we show the successful synthesis of a series of K 3 V 3–x Cr x (PO 4 ) 4 (x = 0, 1, 2, 3) compounds. Among these, K 3 V 2 Cr(PO 4 ) 4 exhibits the largest reversible capacity, as revealed by the in situ investigation. Lastly, we find that the redox couples in many of these compounds sit at remarkably high potential, even higher than in equivalent Li compounds, which brings both opportunities and challenges in the future research of K polyanion cathodes.

25 ENERGY STORAGE↗
DOE OSTI2024

A weakly ion pairing electrolyte designed for high voltage magnesium batteries

High-voltage rechargeable magnesium batteries (RMBs) are potential alternatives to lithium-ion batteries owing to the low cost and high abundance of magnesium. However, the parasitic reactions of the latter with many electrolytes greatly hinders the stability and kinetics of Mg plating/stripping. Here we report a new and easily accessible solvent-designed electrolyte, which effectively solves the difficulty of ion pair dissociation and facilitates fast nanoscale Mg nucleation/growth using simple Mg(TFSI)2 as the salt, enabling a facile interfacial charge transfer process. Dendrite-free Mg plating/stripping is maintained for over 7000 hours (∼10 months) at a practical areal capacity of 2 mA h cm−2. The high-voltage stability of these electrolytes is demonstrated by benchmarking with polyaniline||Mg full cells with an operating voltage up to 3.5 V that exhibit stable cycling at a 2C rate with 99% coulombic efficiency after 400 cycles. This work opens up new frontiers in coupling low-cost electrolytes with next-generation high-voltage cathode materials for fast-charging RMBs with long life and high energy densities.

Li, Chang↗
DOE OSTI2020

Installation and commissioning of the ion source systems for the new spallation neutron source 2.5 MeV injector

The U.S. Spallation Neutron Source (SNS) is a state-of-the-art neutron scattering facility delivering the world’s most intense pulsed neutron beams to a wide array of instruments, which are used to conduct investigations in many fields of engineering, physics, chemistry, material science, and biology. Neutrons are produced by spallation of liquid Hg by the bombardment of short (∼1 µs), intense (∼35 A) pulses of protons delivered at 60 Hz by an accumulator ring which is fed by a high-intensity, 1 GeV, H− LINAC (linear accelerator). This facility has operated nearly continuously since 2006 but has recently undergone a 4-month maintenance period, which featured a complete replacement of the 2.5 MeV injector feeding the LINAC. The new injector was developed at ORNL in an off-line beam test facility and consists of an ion source, low energy beam transport, and a Radio Frequency Quadrupole (RFQ). This report first describes the installed configuration of the new injector detailing the ion source system. The first beam current, RFQ transmission, emittance, and energy measurements from the injector installed on the SNS are reported. These data not only show a significant performance improvement for our existing facility but will also make accessible the higher beam current requirements for future SNS upgrade projects: the proton power upgrade and second target station.

Welton, R. F.↗
DOE OSTI2023

Three-dimensional coupling of electron cyclotron drift instability and ion–ion two stream instability

Electron cyclotron drift instability (ECDI) and ion–ion two stream instability (IITSI) are both kinetic instabilities that can be present in low-temperature, partially magnetized plasmas. The coupling of instabilities in a three-dimensional configuration leads to the existence of more than one unstable roots to the kinetic dispersion relation. In this paper, a generalized method has been developed for numerically evaluating solutions to the three-dimensional dispersion relation for coupled ECDI and IITSI, assuming cold singly and doubly charged ions and a Maxwellian velocity distribution function for the electrons. The present study demonstrates the coupling between ECDI and IITSI that affects the most unstable mode as a function of the wavenumbers in three dimensions and various plasma properties, including the applied electric field, magnetic field, electron temperature, ion velocities, and plasma density. One of the most notable results is that, while the most unstable mode with the largest growth rate is in the direction of the E×B drift in the two-dimensional cases, the most unstable mode for the three-dimensional configuration occurs in the oblique direction between the applied electric field and the E×B drift. Here, this agrees with experimental observations in cross field plasma sources using coherent Thomson scattering.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Achieving a large transverse emittance ratio in the Relativistic Heavy Ion Collider: Beam experiments, analytical estimates, and implications for the Electron-Ion Collider

The Electron-Ion Collider (EIC), to be built at Brookhaven National Laboratory, will collide a polarized high-energy electron beam with polarized proton and light ion beams in the center-of-mass energy range of 20–140 GeV, achieving a maximum peak luminosity of up to 1 × 10 34 cm − 2 s − 1 for the proton and electron collisions. To achieve such a high luminosity, the EIC will employ small, flat beams at the interaction point, which requires a transverse emittance ratio of about 11:1. Since 2017, we have carried out a series of beam experiments to test the feasibility of achieving such a large emittance ratio in the Relativistic Heavy Ion Collider (RHIC). Thanks to the existing stochastic cooling and decoupling feedback system in RHIC, we successfully demonstrated a large transverse emittance ratio of 11:1 with gold ion beams in 2023. In this article, we will present more details and data analysis for these experiments, along with analytical estimates and numerical multiparticle simulations, and provide an outlook for future EIC coupling compensation. Published by the American Physical Society 2025

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Dependence of ion-cyclotron range of frequencies instabilities on species mix and fast-ion distribution: III. Novel sub-cyclotron modes

Dedicated DIII-D experiments studied instabilities above and below the ion cyclotron frequency by injecting thirteen different neutral beam populations into L-mode plasmas with different thermal compositions of H, D, and 3 He at five different values of toroidal field. Two companion papers describe the results of these experiments in detail. This paper focuses on data and analysis of two instabilities that occur at ${\sim}0.6$ of the deuterium and hydrogen cyclotron frequencies $f_\mathrm {cD}$ and $f_\mathrm {cH}$ in mixed hydrogen and deuterium plasmas. The modes below $f_\mathrm {cD}$ are often driven unstable by deuterium beams but are rarely destabilized by hydrogen beams. The modes below $f_\mathrm {CD}$ are reported here for the first time in a fusion plasma. These $\mathrm{sub-}f_\mathrm {cH}$ modes are only driven by deuterium beams but, unlike the $\mathrm{sub-}f_\mathrm {cD}$ modes, they are only unstable in plasmas with deuterium concentrations that are ${\lesssim}20\%$; they also have a smaller amplitude than the sub-deuterium modes. Addition of fully-ionized 3 He to the plasma has little effect on the sub-cyclotron deuterium modes but is stabilizing for the sub-cyclotron hydrogen modes. The modes are excited in the core and have toroidal mode numbers around 20. These trends are compared with calculations of the growth rate in a simplified model. The theory successfully predicts global Alfvén eigenmode instability with frequencies and mode numbers close to experimental values, the stronger amplitude of the sub-deuterium modes, and the species-mix dependence of the sub-hydrogen modes. Increased damping associated with the ion-ion hybrid, cutoff, and crossover frequencies plausibly accounts for the stabilization of the $\mathrm{sub-}f_\mathrm {cH}$ modes when 3 He is puffed. However, the relative stability of $\mathrm{sub-}f_\mathrm {cH}$ modes during hydrogen injection remains unexplained.

electromagnetic ion cyclotron instability↗