Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Czochralski Growth of Indium Iodide and other Wide Bandgap Semiconductor Compounds

The Czochralski pulling process is the most valuable and cost efficient method for producing large oriented single crystals of the group IV and III-V semiconductors. However, there have been only a small number of reported attempts to use the Czochralski process for growing the wide bandgap compound semiconductors, needed for the room temperature operated gamma-ray detectors. The main difficulty is in the low chemical stability and high vapor pressure of the group II, V and VI elements, leading to off-stoichiometric composition, and various related defects. Among the heavy metal halides, indium iodide and indium bromide present an interesting exception. InI has a high molecular disassociation energy and a low vapor pressure, allowing for Czochralski pulling. Finally, we will describe the procedures used and the results obtained by Czochralski growth and characterization of indium iodide and the related ternary compounds that appear to be quite encouraging.

36 MATERIALS SCIENCE↗

Lattice defects in semiconducting Hg/1-x/Cd/x/Te alloys. I - Defect structure of undoped and copper doped Hg/0.8/Cd/0.2/Te. II - Defect structure of indium-doped Hg/0.8/Cd/0.2/Te

Hall effect and mobility measurements were conducted on undoped Hg(0.8)Cd(0.2)Te crystals which were quenched to room temperature after being subjected to equilibration at temperatures ranging from 400 to 655 C in various Hg atmospheres. The variation of the hole concentration in the cooled crystals at 77 K as a function of Hg's partial pressure at the equilibration temperature, together with a comparison of the hole mobility in the undoped samples with that in copper-doped ones, yields a defect model for the undoped crystals according to which they are intrinsic at the equilibration temperatures and the native acceptor defects are doubly ionized. In the second part of this paper, the effects of indium doping are considered. The concentration of electrons obtained in the cooled crystals was found to be lower than the intrinsic carrier concentration at the equilibration temperatures. A defect model is proposed according to which most of the indium is incorporated as In2Te3(s) dissolved in the crystal, with only a small fraction of indium acting as single donors occupying Hg lattice sites.

Vydyanath, H. R.↗

Reflectance of metallic indium for solar energy applications

An investigation has been conducted in order to compile quantitative data on the reflective properties of metallic indium. The fabricated samples were of sufficiently high quality that differences from similar second-surface silvered mirrors were not apparent to the human eye. Three second-surface mirror samples were prepared by means of vacuum deposition techniques, yielding indium thicknesses of approximately 1000 A. Both hemispherical and specular measurements were made. It is concluded that metallic indium possesses a sufficiently high specular reflectance to be potentially useful in many solar energy applications.

Bouquet, F. L.↗

Indium phosphide solar cells - Recent developments and estimated performance in space

The current status of indium phosphide solar cell research is reviewed. In the NASA research program, efficiencies of 18.8 percent were achieved for standard n/p homojunction InP cells while 17 percent was achieved for ITO/InP cells processed by sputtering n-type indium tin oxide onto p-type indium phosphide. The latter represents a cheaper, simpler processing alternative. Computer modeling calculations indicate that efficiencies of over 21 percent are feasible. Relatively large area cells are produced in Japan with a maximum efficiency of 16.6 percent.

Weinberg, Irving↗

Effect of dislocations on the open-circuit voltage, short-circuit current and efficiency of heteroepitaxial indium phosphide solar cells

Excellent radiation resistance of indium phosphide solar cells makes them a promising candidate for space power applications, but the present high cost of starting substrates may inhibit their large scale use. Thin film indium phosphide cells grown on Si or GaAs substrates have exhibited low efficiencies, because of the generation and propagation of large number of dislocations. Dislocation densities were calculated and its influence on the open circuit voltage, short circuit current, and efficiency of heteroepitaxial indium phosphide cells was studied using the PC-1D. Dislocations act as predominant recombination centers and are required to be controlled by proper transition layers and improved growth techniques. It is shown that heteroepitaxial grown cells could achieve efficiencies in excess of 18 percent AMO by controlling the number of dislocations. The effect of emitter thickness and surface recombination velocity on the cell performance parameters vs. dislocation density is also studied.

Jain, Raj K.↗

Indium Foil Serves As Thermally Conductive Gasket

Indium foil found useful as gasket to increase thermal conductance between bodies clamped together. Deforms to fill imperfections on mating surfaces. Used where maximum temperature in joint less than melting temperature of indium. Because of low melting temperature of indium, most useful in cryogenic applications.

Eastman, G. Yale↗

Tin-polyimide and indium-polyimide thin-film composites as soft X-ray bandpass filters

A tin-polyimide and an indium-polyimide soft X-ray bandpass filter were fabricated with thicknesses of 1400 and 1750 A for the metal and polyimide components, respectively. The transmission of each filter was measured at the Stanford Synchrotron Radiation Laboratory. The transmission of the tin-polyimide filter was found to be about 40 percent for radiation with wavelengths between 60 and 80 A. The transmission of the indium-polyimide filter was greater than 40 percent between 70 and 90 A. The indium was about 5 percent more transmissive than the tin and attained a maximum transmission of about 48 percent at 76 A. Such filters have potential applications to soft X-ray telescopes that operate in this region. They might also be of interest to investigators who work with X-ray microscopes that image live biological specimens in the 23-44-A water window.

Powell, Stephen F.↗

Synthesis and Structural Characterization of Tris(dimethyldithiocarbamate)Indium(III), In[S2CN(CH3)2]3

The synthesis and structure of the indium dithiocarbamate, In[SCN(CH3)2]3*1/2 4-mepy (4-mepy = 4-methylpyridine), is described. Indium metal was oxidized by tetramethylthiuramdisulfide in 4-methylpyridine at 25C to form a new, homoleptic indium(HI) dithiocarbamate in yields exceeding 60%. In[S2CN(CH3)213 exists as a discrete molecule with a distorted-octahedral geometry. The compound crystallizes in the P 1-bar (No. 2) space group with a = 9.282(l)A, b = 10.081(1)A, c = 12.502 A, alpha= 73.91 (1) degrees, beta = 70.21(1) degrees, gamma = 85.84(1) degrees, Z = 2,v(A(exp 3)) =1057.3(3), R = 0.046, and R(sub w) = 0.061.

Clark, Eric B.↗

Synthesis and Structural Characterization of Tris(dimethyldithicarbamate)Indium(III), In[S2CN(CH3)2]3

The synthesis and structure of the indium dithiocarbamate, In[S2CN(CH3)2]30 central dot 1/2 4- mepy (4-mepy = 4-methylpyridine), is described. Indium metal was oxidized by tetramethylthiuramdisulfide in 4-methylpyridine at 25 C to form a new, homoleptic indium(III) dithiocarbamate in yields exceeding 60%. In[S2CN(CH3)2]3 exists as a discrete molecule with a distorted-octahedral geometry. The compound crystallizes in the P 1-bar (No. 2) space group with a = 9.282(l) A, b = 10.081 (1) A, c, c = 12.502 A, alpha = 73.91 (1)(sup 0), beta = 70.21(1)(sup 0), gamma = 85.84(1)(sup 0), Z = 2, V (A(sup 3) = 1057.3(3), R = 0.046, and R(sub w) = 0.061.

Clark, Eric B.↗

Synthesis of Two New Group 13 Benzoato-Chloro Complexes: A Structural Study of Gallium and Indium Chelating Carboxylates

Two new heteroleptic chelated-benzoato gallium (III) and indium (III) complexes have been prepared and structurally characterized. The molecular structures of [GaCl2(4-Mepy)2(O2CPh)]4-Mepy (1) and [InCl(4-Mepy)2(O2CPh)2]4-Mepy (2) have been determined by single-crystal x-ray diffraction. The gallium compound (1) is a distorted octahedron with cis-chloride ligands co-planar with the chelating benzoate and the 4-methylpyridines trans to each other. This is the first example of a Ga(III) structure with a chelating benzoate. The indium compound (2) is a distorted pentagonal bipyramid with two chelating benzoates, one 4-methylpyridine in the plane and a chloride trans to the other 4-methylpyridine. The indium bis-benzoate is an unusual example of a seven-coordinate structure with classical ligands. Both complexes, which due to the chelates, could also be described as pseudo-trigonal bipyramidal, include a three-bladed motif with three roughly parallel aromatic rings that along with a solvent of crystallization and electron-withdrawing chloride ligand(s) stabilize the solid-state structures.

Duraj, Stan A.↗

Effect of Thermal Annealing in Ammonia on the Properties of InGaN Nanowires with Different Indium Concentrations

The utility of an annealing procedure in ammonia ambient is investigated for improving the optical characteristics of InxGa1?xN nanowires (0.07 ≤ x ≤ 0.42) grown on c-Al2O3 using a halide chemical vapor deposition method. Morphological studies using scanning electron microscopy confirm that the nanowire morphology is retained after annealing in ammonia at temperatures up to 800 ?C. However, significant indium etching and composition inhomogeneities are observed for higher indium composition nanowires (x = 0.28, 0.42), as measured by energy-dispersive X-ray spectroscopy and Z-contrast scanning transmission electron microscopy. Structural analyses, using X-ray diffraction and high-resolution transmission electron microscopy, indicate that this is a result of the greater thermal instability of higher indium composition nanowires. The effect of these structural changes on the optical quality of InGaN nanowires is examined using steady-state and time-resolved photoluminescence measurements. Annealing in ammonia enhances the integrated photoluminescence intensity of InxGa1?xN nanowires by up to a factor of 4.11 ? 0.03 (for x = 0.42) by increasing the rate of radiative recombination. Fitting of photoluminescence decay curves to a Kohlrausch stretched exponential indicates that this increase is directly related to a larger distribution of recombination rates from composition inhomogeneities caused by annealing. The results demonstrate the role of thermal instability on the improved optical properties of InGaN nanowires annealed in ammonia.

36 MATERIALS SCIENCE↗

Solvothermal indium fluoride chemistry: Syntheses and crystal structures of K{sub 5}In{sub 3}F{sub 14}, beta-(NH{sub 4}){sub 3}InF{sub 6} and [NH{sub 4}]{sub 3}[C{sub 6}H{sub 21}N{sub 4}]{sub 2}[In{sub 4}F{sub 21}]

The solvothermal syntheses and crystal structures of three indium fluorides are presented. K{sub 5}In{sub 3}F{sub 14} (1) and beta-(NH{sub 4}){sub 3}InF{sub 6} (2) are variants on known inorganic structure types chiolite and cryolite, respectively, with the latter exhibiting a complex and apparently novel structural distortion. [NH{sub 4}]{sub 3}[C{sub 6}H{sub 21}N{sub 4}]{sub 2}[In{sub 4}F{sub 21}] (3) represents a new hybrid composition displaying a unique trimeric metal fluoride building unit. - Graphical abstract: Solvothermal synthesis has been used to prepare three indium fluorides, including a novel hybrid material containing a unique [In{sub 3}F{sub 15}] trimer templated by tren.

36 MATERIALS SCIENCE↗

A series of novel gallium and indium borates constructed from [B{sub 5}O{sub 8}(OH){sub 2}]{sup 3-} clusters and metal complex linkers

Four novel gallium and indium borates, [M(en){sub 2}][B{sub 5}O{sub 8}(OH){sub 2}]{center_dot}H{sub 2}O (M=Ga (1), In (2); en=ethylenediamine), [In(dap){sub 2}][B{sub 5}O{sub 8}(OH){sub 2}]{center_dot}H{sub 2}O (3, dap=1,2-diaminopropane), [In(dien)][B{sub 5}O{sub 8}(OH){sub 2}] (4, dien=diethylenetriamine), have been hydrothermally synthesized and characterized by IR spectra, elemental analyses, powder X-ray diffraction, single crystal X-ray diffraction, and thermogravimetric analyses. Compounds 1, 2 and 3 are isostructural and consist of one-dimensional (1-D) chains built up from [B{sub 5}O{sub 8}(OH){sub 2}]{sup 3-} clusters and Ga-/In-complex linkers. The structure of compound 4 features a 1-D chain containing 8-member rings built by [B{sub 5}O{sub 8}(OH){sub 2}]{sup 3-} clusters and {l_brace}In{sub 2}O{sub 4}{r_brace} dimeric cluster linkers which have never observed in the structural chemistry of borates to date. The H-bonding interactions between adjacent chains lead to 3-D supramolecular network structure. - Graphical abstract: Four novel gallium and indium borates with one-dimensional structures built by B{sub 5}O{sub 8}(OH){sub 2}{sup 3+} clusters and metal complex linkers have been successfully synthesized under hydrothermal conditions. Highlights: Black-Right-Pointing-Pointer Four new Ga/In borates have been hydrothermally made. Black-Right-Pointing-Pointer The helical/ribbon-like chains made of B{sub 5}O{sub 8}(OH){sub 2}{sup 3+} clusters and Ga-/In-complex linkers. Black-Right-Pointing-Pointer The chains form novel 3-D supermolecule framework via H-bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural, electrical and optical properties of indium tin oxide (ITO) nanoparticles synthesized by co-precipitation method

Highlights: Black-Right-Pointing-Pointer The grain size of the ITO is decreased from 28.7 to 9.0 nm by increasing Sn dopant. Black-Right-Pointing-Pointer The strain values increased with the incorporation of Sn in In{sub 2}O{sub 3} host lattice. Black-Right-Pointing-Pointer The lower resistivity of 4.9 {Omega} cm is obtained for 10 at.% Sn doped ITO. Black-Right-Pointing-Pointer The band gap varies from 3.62 to 3.89 eV with dopant concentration of Sn. -- Abstract: In the present study, the synthesis of Tin doped indium oxide (ITO) nanopowder at different compositions (In/Sn = 0, 5, 10, 15 at %) was carried out by co-precipitation method. The decomposition of precipitated indium tin acetylacetonate precursor to form In{sub 2}O{sub 3}-SnO{sub 2} (Sn{sub 1-x}In{sub x}O{sub 2}) at 400 Degree-Sign C was confirmed by the thermal and FTIR studies. The changes in strain and grain size of the synthesized particle with respect to dopant concentration were determined from the X-ray diffraction (XRD) analysis. Transmission electron microscopy (TEM) images support to confirm the grain size. The optical properties on ITO nanoparticles were analyzed with UV-visible spectroscopy, and band gap was found to vary from 3.62 to 3.89 eV with Sn dopant concentration. This variation was ascribed to the quantum confinement effect.

36 MATERIALS SCIENCE↗

A study of the characteristics of indium tin oxide after chlorine electro-chemical treatment

Graphical abstract: The presence of Chlorine in the outer surface resulted in a highly electro-negative surface states and an increase in the vacuum energy level. - Highlights: • We investigated the influence of chlorine surface treatment on ITO properties. • Chlorination induced the change of the electro-static potential in the outer surface. • Chlorine electro-chemical treatment of ITO is a simple, fast and effective technique. - Abstract: In this work, we investigate the influence of a chlorine-based electro-chemical surface treatment on the characteristics of indium tin oxide (ITO) including the work function, chemical composition, and phase transition. The treated ITOs were characterized using X-ray photoelectron spectroscopy (XPS), ultra-violet photoelectron spectroscopy (UPS), 4-point probe measurements, and grazing incidence X-ray diffraction (GI-XRD). We confirmed a change of the chemical composition in the near-surface region of the ITO and the formation of indium-chlorine (In-Cl) bonds and surface dipoles (via XPS). In particular, the change of the electro-static potential in the outer surface was caused by chlorination. Due to the vacuum-level shift after the electro-chemical treatment in a dilute hydrochloric acid, the ITO work function was increased by ∼0.43 eV (via UPS); furthermore, the electro-negativity of the chlorine anions attracted electrons to emit them from the hole transport layer (HTL) to the ITO anodes, resulting in an increase of the hole-injection efficiency.

36 MATERIALS SCIENCE↗

Oxygen-Free Atomic Layer Deposition of Indium Sulfide

Atomic layer deposition (ALD) of indium sulfide (In2S3) films was achieved using a newly synthesized indium precursor and hydrogen sulfide. We obtain dense and adherent thin films free from halide and oxygen impurities. Self-limiting half-reactions are demonstrated at temperatures up to 200°C, where oriented crystalline thin films are obtained without further annealing. Low temperature growth of 0.89 Å/cycle is observed at 150°C while higher growth temperatures gradually reduce the per-cycle growth rate. Rutherford backscattering spectroscopy (RBS) together with depth-profiling Auger electron spectroscopy (AES) reveal a S/In ratio of 1.5 with no detectable carbon, nitrogen, halogen, or oxygen impurities. The resistivity of thin films prior to air exposure decreases with increasing deposition temperature, reaching <1 ohm-cm for films deposited at 225°C. Hall measurements reveal n-type conductivity due to free electron concentrations up to 1018 cm-3 and mobilities of order 1 cm2/(V*s). The digital synthesis of In2S3 via ALD at temperatures up to 225°C may allow high quality thin films to be leveraged in optoelectronic devices including photovoltaic absorbers, buffer layers, and intermediate band materials.

Atomic layer deposition↗

Control of surface adatom kinetics for the growth of high-indium content InGaN throughout the miscibility gap

The surface kinetics of InGaN alloys grown via metal-modulated epitaxy (MME) are explored in combination with transient reflection high-energy electron diffraction intensities. A method for monitoring and controlling indium segregation in situ is demonstrated. It is found that indium segregation is more accurately associated with the quantity of excess adsorbed metal, rather than the metal-rich growth regime in general. A modified form of MME is developed in which the excess metal dose is managed via shuttered growth, and high-quality InGaN films throughout the miscibility gap are grown.

36 MATERIALS SCIENCE↗

Coloration and oxygen vacancies in wide band gap oxide semiconductors: Absorption at metallic nanoparticles induced by vacancy clustering—A case study on indium oxide

In this paper, we show by optical and electron microscopy based investigations that vacancies in oxides may cluster and form metallic nanoparticles that induce coloration by extinction of visible light. Optical extinction in this case is caused by generation of localized surface plasmon resonances at metallic particles embedded in the dielectric matrix. Based on Mie's approach, we are able to fit the absorption due to indium nanoparticles in In{sub 2}O{sub 3} to our absorption measurements. The experimentally found particle distribution is in excellent agreement with the one obtained from fitting by Mie theory. Indium particles are formed by precipitation of oxygen vacancies. From basic thermodynamic consideration and assuming theoretically calculated activation energies for vacancy formation and migration, we find that the majority of oxygen vacancies form just below the melting point. Since they are ionized at this temperature they are Coulomb repulsive. Upon cooling, a high supersaturation of oxygen vacancies forms in the crystal that precipitates once the Fermi level crosses the transition energy level from the charged to the neutral charge state. From our considerations we find that the ionization energy of the oxygen vacancy must be higher than 200 meV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗