SEARCH · Engineering Papers

Results for “Helmholtz equation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Bubble Point Measurements of cis-1,1,1,4,4,4-Hexafluorobutene [R-1336mzz(Z)] + trans-1,2-Dichloroethene [R-1130(E)] mixtures

Saturation pressures of pure R-1336mzz(Z) and R-1130(E) and bubble point pressures of three R-1336mzz(Z)/1130(E) blends were measured from 265 K to 360 K. For each pure refrigerant or refrigerant blend, a total of twenty unique saturation pressures or bubble points were measured. In total 100 unique state points were obtained. Presently, no Helmholtz-energy-explicit type equation of state (EoS) is available for R-1130(E). While an extended corresponding states EoS for R-1130(E) is available to estimate the properties of the R-1336mzz(Z)/1130(E) blend, this model does not resolve the azeotropic behavior of the mixture. Therefore, the perturbed-chain statistical-associating fluid theory (PC-SAFT) EoS is used to model the vapor–liquid equilibria of the R-1336mzz(Z)/1130(E) blend. PC-SAFT model parameters are reported, and the overall performance of the model is characterized by deviations from the experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

H2OI95: A Stand-Alone Fortran Code for Evaluating the IAPWS-95 Equation-of-State Model for Water (Rev. 1)

H2OI95 is a stand-alone Fortran code for evaluating the IAPWS-95 equation-of-state model for the thermodynamic properties of water. It also evaluates the corresponding thermochemical properties of water consistent with the CODATA recommendations. The IAPWS-95 model is based on a model equation for the dimensionless Helmholtz energy for which the primary variables are the inverse reduced temperature (τ = T cr /T ) and reduced density (δ = ρ/ρ cr ). Here T is the absolute temperature (K), ρ is density (kg/m³), and the subscript “ cr ” refers to the critical point of water (647.096 K and 22.064 MPa pressure in this model, for which ρ cr is 322 kg/m³). The code solves four basic types of problems, distinguished by the specified inputs: 1. Temperature (K) and density (ρ kg/m³) or reduced density (δ) 2. Temperature (K) and pressure (MPa). 3. Temperature (K) on the saturation (liquid-vapor equilibrium) curve 4. Pressure (MPa) on the saturation curve. Each type of problem is run using a corresponding input (text) file. All but the first type of problem require iteration. For example, to solve for desired temperature and pressure, the reduced density must be adjusted to give the desired pressure. Iteration is accomplished using the Newton-Raphson method, though the secant method is also used in solving the fourth type of problem. For the last three types of problems, H2OI95 has been used to conduct numerical studies of convergence and the problem of multiple numerical solutions, some of which are not physically valid. Obtaining valid results depends mainly on appropriate choice of starting values for the density. The default values used in H2OI95 appear to consistently lead to generally desired results. With modification (not addressed here), H2OI95 can be used to support SUPCRT92 and similar codes that compute chemical thermodynamic properties of species and reactions over a wide range of temperature and pressure (273.16-1273K and 0-1000 MPa). Version 1.1 of this software calculates an extended set of water properties, including some derivable solely from IAPWS-95, such as the isobaric thermal expansivity and the isothermal compressibility, and still other properties based on supplementary models sanctioned by IAPWS, including the dynamic viscosity, thermal conductivity, surface tension, and static dielectric constant, and various other properties (notably Debye-Hückel parameters) derivable from the dielectric constant and its partial derivatives with respect to temperature and pressure. A coding error in Version 1.0 was identified while testing the implementation of the viscosity model. This error is described in Appendix C. It mainly affects calculation of “higher order” properties such as compressibility and heat capacity near the critical point.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1991

Discussion summary: Fictitious domain methods

Fictitious Domain methods are constructed in the following manner: Suppose a partial differential equation is to be solved on an open bounded set, Omega, in 2-D or 3-D. Let R be a rectangle domain containing the closure of Omega. The partial differential equation is first solved on R. Using the solution on R, the solution of the equation on Omega is then recovered by some procedure. The advantage of the fictitious domain method is that in many cases the solution of a partial differential equation on a rectangular region is easier to compute than on a nonrectangular region. Fictitious domain methods for solving elliptic PDEs on general regions are also very efficient when used on a parallel computer. The reason is that one can use the many domain decomposition methods that are available for solving the PDE on the fictitious rectangular region. The discussion on fictitious domain methods began with a talk by R. Glowinski in which he gave some examples of a variational approach to ficititious domain methods for solving the Helmholtz and Navier-Stokes equations.

Glowinski, Rowland↗

NASA NTRS1990

Numerical investigation of laminar-turbulent transition in a flat plate wake

Lamina-turbulent transition of high-deficit flat plate wakes is investigated by direct numerical simulations using the complete Navier Stokes equations. The simulations are based on a spatial model so that both the base flow and the disturbance flow can develop in the downstream direction. The Navier Stokes equations are used in a vorticity-velocity form and are solved using a combination of finite difference and spectral approximations. Fourier series are used in the spanwise direction. Second-order finite-differences are used to approximate the spatial derivatives in the streamwise and transverse directions. For the temporal discretion, a combination of ADI, Crank-Nicolson, and Adams-Bashforth methods is employed. The discretized velocity equations are solved using fast Helmholtz solvers. Code validation is accomplished by comparison of the numerical results to both linear stability and to experiments. Calculations of two- and/or three-dimensional sinuous and mode disturbances in the wake of flat plate are undertaken. For calculations of two-dimensional disturbances, the wake is forced at an amplitude level so that nonlinear disturbance development may be observed. In addition, the forcing amplitude is varied in order to determine its effect on the disturbance behavior. To investigate the onset of three-dimensionality, the wake is forced with a small-amplitude three-dimensional disturbance and a larger amplitude two-dimensional disturbance. The two-dimensional forcing amplitude is varied in order to determine its influence on the three-dimensional flow field.

Fasel, Hermann F.↗

DOE OSTI2025

Equation of State for the Thermodynamic Properties of Trans-1,2-dichloroethene [R-1130(E)]

We present an empirical equation of state in terms of the Helmholtz energy for trans-1,2-dichloroethene [R-1130(E)]. The range of validity is from the triple-point temperature, 223.31 K to 525 K with pressures up to 30 MPa. It may be used to calculate all thermodynamic properties in the fluid phase, including liquid, gas, and supercritical regions. Comparisons are given with existing literature data and estimated uncertainties are provided. In addition, checks were made for correct extrapolation behavior so that the equation behaves in a physically realistic manner when used outside of its range of validity, enabling its use in mixture models. The estimated uncertainties (at a k = 2 or 95 % level of confidence) are based on comparisons with critically assessed data and are 0.25 % for vapor pressure for temperatures in the range 300 K < T < 454 K, rising to 1.5 % as the temperature decreases from 300 K to 265 K. For density in the liquid phase the estimated uncertainty is 0.14 % for temperatures 270 K < T < 410 K and for pressures up to 30 MPa. For the vapor phase the estimated uncertainty in density is 3 %. The uncertainty for liquid-phase heat capacity is 1 % at atmospheric pressure over the temperature range 268 K < T < 309 K, and the uncertainty for the speed of sound in the liquid phase is 0.25 % for temperatures 230 K < T < 420 K and for pressures up to 30 MPa. The uncertainties are larger outside of these specified ranges and in the critical region.

1,2-Dichloroethene↗

DOE OSTI2022

Quasi-Helmholtz decomposition, Gauss' laws and charge conservation for finite element particle-in-cell

Development of particle-in-cell (PIC) methods using finite element based methods (FEMs) have been a topic of renewed interest; this has largely been driven by (a) the ability of finite element methods to better model geometry, (b) better understanding of function spaces that are necessary to represent all Maxwell quantities, and (c) more recently, the fundamental rubrics that should be obeyed in space and time so as to satisfy Gauss' laws and the equation of continuity. In that vein, methods have been developed recently that satisfy these equations and are agnostic to time stepping methods. While this development is indeed a significant advance, it should be noted that implicit FEM transient solvers support an underlying null space that corresponds to a gradient of a scalar potential ∇Φ(r) (or t∇Φ(r) in the case of wave equation solvers). While explicit schemes do not suffer from this drawback, they are only conditionally stable with time step sizes that are mesh dependent and very small. Furthermore, the null space produces spurious charge that can corrupt the desired physics of a PIC simulation. The way to overcome this bottleneck, and indeed, satisfy all four Maxwell's equation is to use a quasi-Helmholtz formulation on a tessellation. In the re-formulation presented, we strictly satisfy the equation of continuity and Gauss' laws for both the electric and magnetic flux densities. Results illustrating the efficacy of this scheme will be demonstrated by analyzing non-neutral beams with space-charge and the adiabatic expansion of a neutral plasma with realistic parameters (Debye length and real mass ratios).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS1985

Electrodynamic interaction of Ganymede with the Jovian magnetosphere and the radial spread of wake-associated disturbances

An investigation is conducted of the electrostatics of the interaction of Jupiter's satellite Ganymede with the Jovian plasma and the MHD stability of the resulting downstream cavity, taking into account an evaluation of the effect of distorted magnetic field models on the radial extent of the disturbances. The objective of the investigation is an understanding of the data which have been provided by Voyager 2 during its approach to Jupiter, giving attention to the Voyager 2 magnetometer experiment. It is concluded that the magnetic field distortion by itself is insufficient to explain the large radial extent of the observed wake encounters. Linear treatment of MHD equations showed that the Kelvin-Helmholtz instability is initiated at the plasma-cavity interface.

Tariq, G. F.↗

NASA NTRS1988

Kinetic theory for electrostatic waves due to transverse velocity shears

A kinetic theory in the form of an integral equation is provided to study the electrostatic oscillations in a collisionless plasma immersed in a uniform magnetic field and a nonuniform transverse electric field. In the low temperature limit the dispersion differential equation is recovered for the transverse Kelvin-Helmholtz modes for arbitrary values of K parallel, where K parallel is the component of the wave vector in the direction of the external magnetic field assumed in the z direction. For higher temperatures the ion-cyclotron-like modes described earlier in the literature by Ganguli, Lee and Plamadesso are recovered. In this article, the integral equation is reduced to a second-order differential equation and a study is made of the kinetic Kelvin-Helmholtz and ion-cyclotron-like modes that constitute the two branches of oscillation in a magnetized plasma including a transverse inhomogeneous dc electric field.

Ganguli, G.↗

DOE OSTI2021

Self-similar Reynolds-averaged mechanical–scalar turbulence models for Rayleigh–Taylor, Richtmyer–Meshkov, and Kelvin–Helmholtz instability-induced mixing in the small Atwood number limit

Analytical self-similar solutions to two-, three-, and four-equation Reynolds-averaged mechanical–scalar turbulence models describing incompressible turbulent Rayleigh–Taylor, Richtmyer–Meshkov, and Kelvin–Helmholtz instability-induced mixing in planar geometry are derived in the small Atwood number (Boussinesq) limit. The models are based on the turbulent kinetic energy K and its dissipation rate ε, together with the scalar (heavy-fluid mass fraction) variance S and its dissipation rate Χ modeled either differentially or algebraically. The models allow for a simultaneous description of mechanical and scalar mixing, i.e., mixing layer growth and molecular mixing, respectively. Mixing layer growth parameters and other physical observables relevant to each instability are obtained explicitly as functions of the model coefficients. The turbulent fields are also expressed in terms of the model coefficients, with their temporal power-law scalings obtained by requiring that the self-similar equations are explicitly time-independent. The model calibration methodology is described and discussed. Expressions for a subset of the various physical observables are used to calibrate each of the two-, three-, and four-equation models, such that the self-similar solutions are consistent with experimental and numerical simulation data corresponding to these values of the observables and to specific canonical Rayleigh–Taylor, Richtmyer–Meshkov, and Kelvin–Helmholtz turbulent flows. A calibrated four-equation model is then used to reconstruct the mean and turbulent fields, and late-time turbulent equation budgets for each instability-induced flow across the mixing layer. The reference solutions derived here can provide systematic calibrations and better understanding of mechanical–scalar turbulence models and their predictions for instability-induced turbulent mixing in the very large Reynolds number limit.

42 ENGINEERING↗

NASA NTRS1985

On the use of internal state variables in thermoviscoplastic constitutive equations

The general theory of internal state variables are reviewed to apply it to inelastic metals in use in high temperature environments. In this process, certain constraints and clarifications will be made regarding internal state variables. It is shown that the Helmholtz free energy can be utilized to construct constitutive equations which are appropriate for metallic superalloys. Internal state variables are shown to represent locally averaged measures of dislocation arrangement, dislocation density, and intergranular fracture. The internal state variable model is demonstrated to be a suitable framework for comparison of several currently proposed models for metals and can therefore be used to exhibit history dependence, nonlinearity, and rate as well as temperature sensitivity.

Allen, D. H.↗

NASA NTRS1993

Pinching solutions of slender cylindrical jets

Simplified equations for slender jets are derived for a circular jet of one fluid flowing into an ambient second fluid, the flow being confined in a circular tank. Inviscid flows are studied which include both surface tension effects and Kelvin-Helmholtz instability. For slender jets a coupled nonlinear system of equations is found for the jet shape and the axial velocity jump across it. The equations can break down after a finite time and similarity solutions are constructed, and studied analytically and numerically. The break-ups found pertain to the jet pinching after a finite time, without violation of the slender jet ansatz. The system is conservative and admissible singular solutions are those which conserve the total energy, mass, and momentum. Such solutions are constructed analytically and numerically, and in the case of vortex sheets with no surface tension certain solutions are given in closed form.

Papageorgiou, Demetrios T.↗

NASA NTRS1991

On the thermodynamic framework of generalized coupled thermoelastic-viscoplastic-damage modeling

A complete potential based framework using internal state variables is put forth for the derivation of reversible and irreversible constitutive equations. In this framework, the existence of the total (integrated) form of either the (Helmholtz) free energy or the (Gibbs) complementary free energy are assumed a priori. Two options for describing the flow and evolutionary equations are described, wherein option one (the fully coupled form) is shown to be over restrictive while the second option (the decoupled form) provides significant flexibility. As a consequence of the decoupled form, a new operator, i.e., the Compliance operator, is defined which provides a link between the assumed Gibb's and complementary dissipation potential and ensures a number of desirable numerical features, for example the symmetry of the resulting consistent tangent stiffness matrix. An important conclusion reached, is that although many theories in the literature do not conform to the general potential framework outlined, it is still possible in some cases, by slight modifications of the used forms, to restore the complete potential structure.

Arnold, S. M.↗

DOE OSTI2021

Non-intrusive data-driven model reduction for differential–algebraic equations derived from lifting transformations

In this paper we present a non-intrusive data-driven approach for model reduction of nonlinear systems. The approach considers the particular case of nonlinear partial differential equations (PDEs) that form systems of partial differential–algebraic equations (PDAEs) when lifted to polynomial form. Such systems arise, for example, when the governing equations include Arrhenius reaction terms (e.g., in reacting flow models) and thermodynamic terms (e.g., the Helmholtz free energy terms in a phase-field solidification model). Using the known structured form of the lifted algebraic equations, the approach computes the reduced operators for the algebraic equations explicitly, using straightforward linear algebra operations on the basis matrices. The reduced operators for the differential equations are inferred from lifted snapshot data using operator inference, which solves a linear least squares regression problem. The approach is illustrated for the nonlinear model of solidification of a pure material. The lifting transformations reformulate the solidification PDEs as a system of PDAEs that have cubic structure. The operators of the lifted system for this solidification example have affine dependence on key process parameters, permitting us to learn a parametric reduced model with operator inference. Numerical experiments show the effectiveness of the resulting reduced models in capturing key aspects of the solidification dynamics.

42 ENGINEERING↗

DOE OSTI2026

A buoyancy–shear–drag–scalar-based turbulence model for power-law acceleration-driven Rayleigh–Taylor, reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz mixing

A previously developed phenomenological turbulence model for Rayleigh–Taylor, reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz instability-induced mixing based on a general buoyancy–shear–drag model [O. Schilling, “A buoyancy–shear–drag-based turbulence model for Rayleigh–Taylor, reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz mixing,” Physica D 402, 132238 (2020)] is extended to include active or passive scalar mixing and power-law acceleration-driven Rayleigh–Taylor mixing. The buoyancy–shear–drag equations are coupled to a scalar variance equation that is used to define the molecular mixing parameter θ m , and when the scalar is active, modifies the Rayleigh–Taylor and Kelvin–Helmholtz mixing layer growth parameters to depend on the asymptotic value of this parameter, θ mol . Here, the scalar variance equation is closed by algebraically or differentially modeling the scalar variance dissipation rate. Nonlinear analytical solutions of the model are obtained in the total and separate bubble and spike mixing layer width formulations with the algebraic scalar variance dissipation rate for each instability, which are then used to calibrate the mechanical and scalar equation coefficients to predict specific values of physical observables and molecular mixing parameters. Surrogate mechanical and scalar turbulent fields can be constructed by multiplying a presumed self-similar spatial profile by appropriate functions of the width and its time derivative, and of the scalar obtained by solving the ordinary differential model equations. The explicit modeling and solution of turbulent transport equations are not required. The bubble and spike mixing layer width and scalar variance equations are then solved numerically for constant-acceleration Rayleigh–Taylor, impulsively reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz mixing, confirming that the prescribed level of molecular mixing is correctly predicted and illustrating the spatiotemporal evolution of the scalar fields.

Buoyancy–drag↗

NASA NTRS1989

The Helmholtz-Kirchhoff integral relation as a framework for developing algorithms for sound propagation through inhomogeneous moving media

Transient sound propagation in an inhomogeneous moving medium is considered. For circumstances in which the medium is slowly varying over distances of a wavelength but possibly varying substantially over the propagation distance, a derivation is given of a new wave equation, which implicitly allows for diffraction and scattering and which also is consistent with earlier geometrical acoustics formulations. This wave equation is used as a starting point to derive a version of the Helmholtz-Kirchhoff integral relation that applies to inhomogeneous moving medium. It is suggested that a good approximation to the Green's function that appears in this relation is that derived from geometrical acoustics, the approximation becoming progressively better the shorter the distance between surfaces in the computation. It should also be at least as good as conventional ray acoustics, but can account for diffraction effects, such as at caustics.

Pierce, Allan D.↗

NASA NTRS1982

Nonlocal stability analysis of the MHD Kelvin-Helmholtz instability in a compressible plasma

A general stability analysis is given of the Kevin-Helmholtz instability, for the case of sheared MHD flow of finite thickness in a compressible plasma which allows for the arbitrary orientation of the magnetic field, velocity flow, and wave vector in the plane perpendicular to the velocity gradient. The stability problem is reduced to the solution of a single second-order differential equation including a gravitational term to represent the coupling between the Kelvin-Helmholtz mode and the interchange mode. Compressibility and a magnetic field component parallel to the flow are found to be stabilizing effects, with destabilization of only the fast magnetosonic mode in the transverse case, and the presence of both Alfven and slow magnetosonic components in the parallel case. Analysis results are used in a discussion of the stability of sheared plasma flow at the magnetopause boundary and in the solar wind.

Miura, A.↗

DOE OSTI2020

High-order matrix-free incompressible flow solvers with GPU acceleration and low-order refined preconditioners

In this work, we present a matrix-free flow solver for high-order finite element discretizations of the incompressible Navier-Stokes and Stokes equations with GPU acceleration. For high polynomial degrees, assembling the matrix for the linear systems resulting from the finite element discretization can be prohibitively expensive, both in terms of computational complexity and memory. For this reason, it is necessary to develop matrix-free operators and preconditioners, which can be used to efficiently solve these linear systems without access to the matrix entries themselves. The matrix-free operator evaluations utilize GPU-accelerated sum-factorization techniques to minimize memory movement and maximize throughput. The preconditioners developed in this work are based on a low-order refined methodology with parallel subspace corrections, as described for diffusion problems in [1]. The saddle-point Stokes system is solved using block-preconditioning techniques, which are robust in mesh size, polynomial degree, time step, and viscosity. For the incompressible Navier-Stokes equations, we make use of projection (fractional step) methods, which require Helmholtz and Poisson solves at each time step. The performance of our flow solvers is assessed on several benchmark problems in two and three spatial dimensions.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1984

The collisionless macroscopic Kelvin-Helmholtz instabiity. I Transverse electrostatic mode

The electrostatic limit of the Kelvin-Helmholtz instability in a collisionless plasma is investigated for a magnetic field perpendicular to the velocity flow. A two-fluid eigenvalue analysis of the transverse electrostatic Kelvin-Helmholtz instability is performed using the Chew-Goldberger-Low hydromagnetic equations with first-order finite Larmer radius corrections, establishing that the transverse electrostatic mode reduces to the incompressible transverse MHD mode in the limit of zero ion gyroradius. The linear growth rates are determined and a strong stabilization of the instability for (k-perpendicular) (rho sub i) of 0.2 or greater is observed. The nonlinear stage of the instability displays large vortices whose size is many times the initial velocity shear length. At saturation the simulation is dominated by the longest-wavelength mode permitted in the system. The simulation results can be understood in terms of a simple model which assumes that saturation occurs when the angular frequency of the vortex motion reaches the linear growth rate of the instability.

Prichett, P. L.↗