Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

TeV gamma rays from Galactic Center pulsars

Measurements of the nearby pulsars Geminga and B0656+14 by the HAWC and Milagro telescopes have revealed the presence of bright TeV-emitting halos surrounding these objects. If young and middle-aged pulsars near the Galactic Center transfer a similar fraction of their energy into TeV photons, then these sources could plausibly dominate the emission that is observed by HESS and other ground-based telescopes from the innermost $\sim$$10^2$ parsecs of the Milky Way. In particular, both the spectral shape and the angular extent of this emission is consistent with TeV halos produced by a population of pulsars, although the reported correlation of this emission with the distribution of molecular gas suggests that diffuse hadronic processes also must contribute. The overall flux of this emission requires a birth rate of ~100-1000 neutron stars per Myr near the Galactic Center, in good agreement with recent estimates.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Structures and standard molar enthalpies of formation of a series of Ln(III)–Cu(II) heteronuclear compounds with pyrazine-2,3-dicarboxylic acid

Fifteen lanthanide–copper heteronuclear compounds, formulated as [CuLn{sub 2}(pzdc){sub 4}(H{sub 2}O){sub 6}]·xH{sub 2}O (1–6(x=2), 8(x=3), 9–10(x=4)); [CuLn{sub 2}(pzdc){sub 4}(H{sub 2}O){sub 4}]·xH{sub 2}O (7, 12–13, 15(x=4), 14(x=5), 11(x=8)) (Ln(III)=La(1); Ce(2); Pr(3); Nd(4); Sm(5); Eu(6); Gd(7); Tb(8); Dy(9); Ho(10); Er(11); Tm(12); Yb(13); Lu(14); Y(15); H{sub 2}pzdc (C{sub 6}H{sub 4}N{sub 2}O{sub 4})=pyrazine-2,3-dicarboxylic acid) have been hydrothermally synthesized. All compounds were characterized by element analysis, IR spectroscopy, single-crystal X-ray diffraction and thermal analysis. X-ray diffraction analyses confirm that all compounds are isostructural and feature a 3D brick-like framework structure with (4.6{sup 2}){sub 2}(4{sup 2}.6{sup 2}.8{sup 2})(6{sup 3}){sup 2}(6{sup 5}.8){sub 2} topology. Using 1 mol cm{sup −3} HCl(aq) as calorimetric solvent, with an isoperibol solution–reaction calorimeter, the standard molar enthalpies of formation of all compounds were determined by a designed thermochemical cycle. In addition, solid state luminescence properties of compounds 5, 6, 8 and 9 were studied in the solid state. - Graphical abstract: According to Hess' rule, the standard molar enthalpies of formation of Ln–Cu heterometallic coordination compounds were determined by a designed thermochemical cycle. - Highlights: • Fifteen lanthanide–copper heteronuclear isostructural compounds. • Structurally characterization by IR, X-ray diffraction and thermal analysis. • The standard molar enthalpy of formation. • Isoperibol solution–reaction calorimetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stability of M 3 S 3 complexes on fcc M(111) surfaces: M = Au, Ag, Cu, and Ni

Density Functional Theory is utilized to assess the stability of metal (M)-sulfur (S) complexes adsorbed on fcc M(111) surfaces, specifically considering S-decorated planar M trimers, M 3 S 3 . Scanning Tunneling Microscopy studies have identified structures proposed to be Ni 3 S 3 on Ni(111), and Au 3 S 3 on Au(111). In addition, Cu 3 S 3 on Cu(111) has been suggested to facilitate enhanced Cu surface mass transport. Our analysis considers M 3 S 3 complexes for M = Au, Ag, Cu, and Ni, assessing key measures of stability on surfaces, and also comparing behavior with trends in gas-phase stability. These surface and gas-phase analyses are systematically related within the framework of Hess’s law, which allows elucidation of various contributions to the overall energetics. In all cases, the adsorbed complex is stable relative to its separated constituents adsorbed on the terrace. However, only for Ag does one find a negative energy of formation from excess S on terraces and M extracted from kink sites along step edges, implying spontaneous complex formation for this pathway. We interpret various experimental observations in the context of our results for energetics.

36 MATERIALS SCIENCE↗

Linearized Pair-Density Functional Theory with Spin–Orbit Coupling

Here, we include spin–orbit coupling (SOC) effects in linearized pair-density functional theory (L-PDFT), which is a multistate extension of multiconfiguration pair-density functional theory (MC-PDFT). Both 1-electron and 2-electron SOC integrals are computed using Breit-Pauli and Douglas–Kroll–Hess Hamiltonians in the atomic mean-field approximation. SO-L-PDFT removes the unphysical J-symmetry breaking observed in MC-PDFT. The accuracy of SO-L-PDFT is validated by calculations of zero-field splittings, fine-structure excitation energies, and low-energy excited-state spectra for a diverse group of atoms and molecules spanning the whole range of the periodic table, including atoms of groups 3, 11, and 13–17, the Ce 3+ and U 5+ ions, group 16 monohydrides, group 17 monoxides, lanthanide hexachlorides ([CeCl 6 ] 3− , [PrCl 6 ] 3− , and [NdCl 6 ] 3− ), actinyl ions ([UO 2 ] + , [NpO 2 ] 2+ ), and tricarbonatoactinyl complexes ([UO 2 (CO 3 ) 3 ] 5− , [NpO 2 (CO 3 ) 3 ] 4− ). We also compare the results to new spin–orbit-inclusive calculations by single-state and multistate multireference perturbation theory.

Hamiltonians↗

Spin–Orbit Coupling Constants in Atoms and Ions of Transition Elements: Comparison of Effective Core Potentials, Model Core Potentials, and All-Electron Methods

The spin–orbit coupling constants (SOCC) in atoms and ions of the first- through third-row transition elements were calculated for the low-lying atomic states whose main electron configuration is [ n d] q ( q = 1–4 and 6–9, n = the principal quantum number), using four different approaches: (1) a nonrelativistic Hamiltonian used to construct multiconfiguration self-consistent field (MCSCF) wave functions utilizing effective core potentials and their associated basis sets within the framework of second-order configuration interaction (SOCI) to calculate spin–orbit couplings (SOC) using one-electron Breit–Pauli Hamiltonian (BPH), (2) a nonrelativistic Hamiltonian used to construct MCSCF wave functions utilizing model core potentials and their associated basis sets within the framework of SOCI to calculate SOC using the full BPH, (3) nonrelativistic and spin-independent relativistic Hamiltonians used to construct MCSCF wave functions utilizing all-electron (AE) basis sets within the framework of SOCI to calculate SOC using the full BPH, and (4) a relativistic Hamiltonian given by the exact two-component (X2C) transformation for construction of Kramers-restricted relativistic configuration interaction wave functions. In this investigation, these four approaches are referred to as ECP, MCP, AE, and X2C methods, respectively. The ECP, MCP, and AE methods are so-called two-step approaches (TSA), while the X2C method is a one-step approach (OSA). In the AE method, three different calculations—relativistic elimination of small components (RESC), third-order Douglas–Kroll–Hess (DKH3), and infinite-order two-component (IOTC) relativistic correction—were performed for the estimation of the scalar relativistic components in addition to those of the nonscalar relativistic (NSR) contributions. The calculated SOCC are compared to the available experimental data via the Landé interval rule. Although there are several exceptions, including states whose main configuration is [ n d] 5 , the average differences between the ECP and AE (IOTC) SOCC and between the ECP and the X2C SOCC are mostly less than 20%. The differences between the ECP and the experimental SOCC are even smaller. No serious discrepancy was found between the TSA and OSA predictions of SOCC for the first- and second-row transition elements in comparison to experiment. For atoms and ions of the third-row transition elements, the SOCC calculated through the Landé interval rule are not reliable. The low-energy spin-mixed (SM) states originating from a [5d]q configuration ( q = 2–4) have a larger energy lowering due to the SOC effects, in comparison with those for atoms and ions of the first- and second-row transition elements. For the spin-mixed (SM) states originating from a [5d]q configuration ( q = 6–8), the energy lowering of all 4 F 7/2 , 5 D 1 , and 5 D 3 states due to the SOC effects is smaller than those of the other SM states. Furthermore this difficulty, which also arises for the MCP, AE, and X2C (OSA) approaches, suggests that the LS-coupling scheme is inappropriate.

74 ATOMIC AND MOLECULAR PHYSICS↗

Coinage Metal–Sulfur Complexes: Stability on Metal(111) Surfaces and in the Gas Phase

We introduce a comprehensive theoretical assessment at the level of density functional theory (DFT) of the stability of various coinage metal–sulfur complexes, both in the gas phase and also for the complexes adsorbed on the (111) surface of the same coinage metal. Our primary interest lies in the latter where earlier scanning tunneling microscopy (STM) experiments were interpreted to imply the existence of adsorbed S-decorated metal trimers, sometimes as a component of more complex adlayer structures. Recent STM studies at 5 K directly observed other isolated adsorbed metal–sulfur complexes. For these adsorbed species, we measure various aspects of their energetics including a natural measure of stability corresponding to their formation energy from sulfur adsorbed on terraces and from metal atoms that are in thermal equilibrium with the substrate. From this perspective, our DFT analysis shows that all of Ag 2 S 3 , Ag 3 S 3 , and many larger complexes on Ag(111) are strongly stable, Cu 2 S 3 is stable, and some larger complexes are marginally stable on Cu(111), but only Au 4 S 4 on Au(111) is stable. Results are consistent with STM observations for Cu(111) and Ag(111) surfaces but appear to deviate slightly for Au(111). A systematic analysis relating stability in the gas phase with that of adsorbed species is achieved within the framework of Hess’s law. This analysis also unambiguously elucidates various energetic contributions to stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-Component Relativistic Calculations of Electric-Field Gradients Using Exact Decoupling Methods: Spin–orbit and Picture-Change Effects

Electric field gradients (EFGs) for heavy nuclei in diatomic molecules (hydrogen halides and group-13 iodides), uranyl (UO 2 2+ ), and a uranyl carbonate complex, were computed with different formally exactly (or nearly exactly) decoupled two-component relativistic Hamiltonians: the “exact two-component” (X2C) method, the Barysz–Sadlej–Snijders (BSS) approach, and up to 35th order in the Douglas–Kroll–Hess (DKH) expansion, utilizing a new implementation in the open-source NWChem quantum chemistry package. Results from two-component Hartree–Fock and density functional theory (DFT) calculations at the scalar relativistic approximation as well as including spin–orbit coupling are reported. Picture-change corrected EFGs obtained with X2C, BSS, and high-order DKH are shown to be numerically equivalent. Effects from spin–orbit coupling on the EFGs tend to be moderate but should not be excluded for reliable predictions. Picture-change effects on the EFG of a heavy atom can be as large as the correct picture-change corrected value, as is shown for the uranium EFG in the uranyl systems. The results demonstrate the necessity of simultaneously including spin–orbit and picture-change effects in calculations of heavy atom EFGs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Frozen-Orbital and Downfolding Calculations with Auxiliary-Field Quantum Monte Carlo

We describe the implementation of the frozen-orbital and downfolding approximations in the auxiliary-field quantum Monte Carlo (AFQMC) method. These approaches can provide significant computational savings, compared to fully correlating all of the electrons. While the many-body wave function is never explicit in AFQMC, its random walkers are Slater determinants, whose orbitals may be expressed in terms of any one-particle orbital basis. It is therefore straightforward to partition the full N-particle Hilbert space into active and inactive parts to implement the frozen-orbital method. In the frozen-core approximation, for example, the core electrons can be eliminated in the correlated part of the calculations, greatly increasing the computational efficiency, especially for heavy atoms. Scalar relativistic effects are easily included using the Douglas–Kroll–Hess theory. Using this method, we obtain a way to effectively eliminate the error due to single-projector, norm-conserving pseudopotentials in AFQMC. We also illustrate a generalization of the frozen-orbital approach that downfolds high-energy basis states to a physically relevant low-energy sector, which allows a systematic approach to produce realistic model Hamiltonians to further increase efficiency for extended systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled synthesis of highly-branched plasmonic gold nanoparticles through peptoid engineering

Inspired by peptide- and protein-controlled formation of hierarchical inorganic nanostructures in nature, herein we report the design of sequence-defined peptoids for biomimetic synthesis of flower-like gold nanosuperstruc-tures. We demonstrate that the peptoid-induced morphosyn-thesis of gold nanoflowers is sequence-dependent. By varying the hydrophobicity, number of carboxylate and amino groups, and side-chain positions of peptoids, we develop a rule of thumb for designing peptoids that yield gold nanoflowers. Through a combination of hyperspectral UV-Vis absorption micro-spectroscopy (H-UVVIS-AMS) and three-photon photoemission electron microscopy (TP-PEEM), we measured the plasmonic properties of individual nanoflowers. Whereas H-UVVIS-AMS experiments revealed well-defined plasmon resonances centered at ~528 nm, TP-PEEM measurements showed an unprecedented plasmonic enhancement as high as 105 for a single nanoflower. A com-bination of the unique plasmonic property and the high sta-bility endows the peptoid-engineered nanoflowers with po-tential applications in chemical and biological imaging. FY, YC, HJ and C-LC acknowledge support by the Materials Synthesis and Simulation Across Scales (MS3) Initiative, through the Laboratory Directed Research & Development (LDRD) fund at Pacific Northwest National Laboratory (PNNL). FY was also partially supported by fellowships from Shandong Provincial Education Association for International Exchanges. YG was supported by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. PZE acknowledges support from the Laboratory Directed Research and Development Program through a Linus Pauling Fellowship at PNNL. PNNL is multi-program national laboratory operated for the Department of Energy by Battelle under Contracts No. DE-AC05-76RL01830. The authors are most grateful to Alan Joly and Wayne Hess (PNNL) for their support with the PEEM measurements and several useful discussions.

Yan, Feng↗

On the spin separation of algebraic two-component relativistic Hamiltonians

The separation of the spin-free and spin-dependent terms of a given relativistic Hamiltonian is usually facilitated by the Dirac identity. However, this is no longer possible for the recently developed exact two-component relativistic Hamiltonians derived from the matrix representation of the Dirac equation in a kinetically balanced basis. This stems from the fact that the decoupling matrix does not have an explicit form. To resolve this formal difficulty, we first define the spin-dependent term as the difference between a two-component Hamiltonian corresponding to the full Dirac equation and its one-component counterpart corresponding to the spin-free Dirac equation. The series expansion of the spin-dependent term is then developed in two different ways. One is in the spirit of the Douglas-Kroll-Hess (DKH) transformation and the other is based on the perturbative expansion of a two-component Hamiltonian of fixed structure, either the two-step Barysz-Sadlej-Snijders (BSS) or the one-step exact two-component (X2C) form. The algorithms for constructing arbitrary order terms are proposed for both schemes and their convergence patterns are assessed numerically. Truncating the expansions to finite orders leads naturally to a sequence of novel spin-dependent Hamiltonians. In particular, the order-by-order distinctions among the DKH, BSS, and X2C approaches can nicely be revealed. The well-known Pauli, zeroth-order regular approximation, and DKH1 spin-dependent Hamiltonians can also be recovered naturally by appropriately approximating the decoupling and renormalization matrices. On the practical side, the sf-X2C+so-DKH3 Hamiltonian, together with appropriately constructed generally contracted basis sets, is most promising for accounting for relativistic effects in two steps, first spin-free and then spin-dependent, with the latter applied either perturbatively or variationally.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Local unitary transformation method toward practical electron correlation calculations with scalar relativistic effect in large-scale molecules

In order to perform practical electron correlation calculations, the local unitary transformation (LUT) scheme at the spin-free infinite-order Douglas–Kroll–Hess (IODKH) level [J. Seino and H. Nakai, J. Chem. Phys.136, 244102 (2012); J. Seino and H. Nakai, J. Chem. Phys.137, 144101 (2012)], which is based on the locality of relativistic effects, has been combined with the linear-scaling divide-and-conquer (DC)-based Hartree–Fock (HF) and electron correlation methods, such as the second-order Møller–Plesset (MP2) and the coupled cluster theories with single and double excitations (CCSD). Numerical applications in hydrogen halide molecules, (HX){sub n} (X = F, Cl, Br, and I), coinage metal chain systems, M{sub n} (M = Cu and Ag), and platinum-terminated polyynediyl chain, trans,trans-((p-CH{sub 3}C{sub 6}H{sub 4}){sub 3}P){sub 2}(C{sub 6}H{sub 5})Pt(C≡C){sub 4}Pt(C{sub 6}H{sub 5})((p-CH{sub 3}C{sub 6}H{sub 4}){sub 3}P){sub 2}, clarified that the present methods, namely DC-HF, MP2, and CCSD with the LUT-IODKH Hamiltonian, reproduce the results obtained using conventional methods with small computational costs. The combination of both LUT and DC techniques could be the first approach that achieves overall quasi-linear-scaling with a small prefactor for relativistic electron correlation calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cosmic-ray induced gamma-ray emission from the starburst galaxy NGC 253

Cosmic rays in galaxies interact with the interstellar medium and give us a direct view of nuclear and particle interactions in the cosmos. For example, cosmic-ray proton interactions with interstellar hydrogen produce gamma rays via PcrPism→π{sup 0}→γγ. For a 'normal' star-forming galaxy like the Milky Way, most cosmic rays escape the Galaxy before such collisions, but in starburst galaxies with dense gas and huge star formation rate, most cosmic rays do suffer these interactions [1,2]. We construct a 'thick-target' model for starburst galaxies, in which cosmic rays are accelerated by supernovae, and escape is neglected. This model gives an upper limit to the gamma-ray emission. Only two free parameters are involved in the model: cosmic-ray proton acceleration energy rate from supernova and the proton injection spectral index. The pionic gamma-radiation is calculated from 10 MeV to 10 TeV for the starburst galaxy NGC 253, and compared to Fermi and HESS data. Our model fits NGC 253 well, suggesting that cosmic rays in this starburst are in the thick target limit, and that this galaxy is a gamma-ray calorimeter.

79 ASTRONOMY AND ASTROPHYSICS↗

Transmission integral analysis of Mössbauer spectra displaying hyperfine parameter distributions with arbitrary profile

Accurate quantitative analysis of Mössbauer spectra displaying thickness effects requires the consideration of the so-called transmission integral when modeling the spectral shape. Whereas this is straightforward when the correct model for the decomposition of the absorber's nuclear resonance absorption cross-section into individual components is a priori known, in the absence of such knowledge and notably in the presence of hyperfine parameter distributions with an unknown profile, the so-called model-independent evaluation methods could be used to fit the spectra. However, the methods available for this purpose were developed for the analysis of spectra for which the thin absorber approximation is valid, and thus they do not take the sample thickness and related effects into account. Consequently, in order to use them for spectra displaying thickness effects, their usage needs to be generalized by combining them with transmission integral fitting. A new algorithm realizing such a generalized version of the Hesse-Rübartsch model-independent evaluation method was developed recently as an integral part of the MossWinn program. In the present work, the working principle of the newly developed algorithm is described in details along with examples illustrating the capabilities of the method for the case of {sup 57}Fe Mössbauer spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Detection of extended galactic sources with an underwater neutrino telescope

In this study we investigate the discovery capability of a Very Large Volume Neutrino Telescope to Galactic extended sources. We focus on the brightest HESS gamma rays sources which are considered also as very high energy neutrino emitters. We use the unbinned method taking into account both the spatial and the energy distribution of high energy neutrinos and we investigate parts of the Galactic plane where nearby potential neutrino emitters form neutrino source clusters. Neutrino source clusters as well as isolated neutrino sources are combined to estimate the observation period for 5 sigma discovery of neutrino signals from these objects.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Composite thermochemistry of gas phase U(VI)-containing molecules

Reaction energies have been calculated for a series of reactions involving UF{sub 6}, UO{sub 3}, UO{sub 2}(OH){sub 2}, and UO{sub 2}F{sub 2} using coupled cluster singles and doubles with perturbative triples, CCSD(T), with a series of correlation consistent basis sets, including newly developed pseudopotential (PP)- and all-electron (AE) Douglas-Kroll-Hess-based sets for the U atom. The energies were calculated using a Feller-Peterson-Dixon composite approach in which CCSD(T) complete basis set (CBS) limits were combined with a series of additive contributions for spin-orbit coupling, outer-core correlation, and quantum electrodynamics effects. The calculated reaction enthalpies (both PP and AE) were combined with the accurately known heat of formation of UF{sub 6} to determine the enthalpies of formation of UO{sub 3}, UO{sub 2}(OH){sub 2}, and UO{sub 2}F{sub 2}. The contribution to the reaction enthalpies due to correlation of the 5s5p5d electrons of U was observed to be very slowly convergent with basis set and at the CBS limit their impact on the final enthalpies was on the order of 1 kcal/mol or less. For these closed shell molecules, spin-orbit effects contributed about 1 kcal/mol to the final enthalpies. Interestingly, the PP and AE approaches yielded quite different spin-orbit contributions (similar magnitude but opposite in sign), but the total scalar plus spin-orbit results from the two approaches agreed to within ∼1 kcal/mol of each other. The final composite heat of formation for UO{sub 2}F{sub 2} was in excellent agreement with experiment, while the two results obtained for UO{sub 3} were just outside the ±2.4 kcal/mol error bars of the currently recommended experimental value. An improved enthalpy of formation (298 K) for UO{sub 2}(OH){sub 2} is predicted from this work to be −288.7 ± 3 kcal/mol, compared to the currently accepted experimental value of −292.7 ± 6 kcal/mol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient two-component relativistic method for large systems

This paper reviews a series of theoretical studies to develop efficient two-component (2c) relativistic method for large systems by the author’s group. The basic theory is the infinite-order Douglas-Kroll-Hess (IODKH) method for many-electron Dirac-Coulomb Hamiltonian. The local unitary transformation (LUT) scheme can effectively produce the 2c relativistic Hamiltonian, and the divide-and-conquer (DC) method can achieve linear-scaling of Hartree-Fock and electron correlation methods. The frozen core potential (FCP) theoretically connects model potential calculations with the all-electron ones. The accompanying coordinate expansion with a transfer recurrence relation (ACE-TRR) scheme accelerates the computations of electron repulsion integrals with high angular momenta and long contractions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlation consistent basis sets for lanthanides: The atoms La–Lu

Using the 3rd-order Douglas-Kroll-Hess (DKH3) Hamiltonian, all-electron correlation consistent basis sets of double-, triple-, and quadruple-zeta quality have been developed for the lanthanide elements La through Lu. Basis sets designed for the recovery of valence correlation (defined here as 4f5s5p5d6s), cc-pVnZ-DK3, and outer-core correlation (valence + 4s4p4d), cc-pwCVnZ-DK3, are reported (n = D, T, and Q). Systematic convergence of both Hartree-Fock and correlation energies towards their respective complete basis set (CBS) limits are observed. Benchmark calculations of the first three ionization potentials (IPs) of La through Lu are reported at the DKH3 coupled cluster singles and doubles with perturbative triples, CCSD(T), level of theory, including effects of correlation down through the 4s electrons. Spin-orbit coupling is treated at the 2-component HF level. After extrapolation to the CBS limit, the average errors with respect to experiment were just 0.52, 1.14, and 4.24 kcal/mol for the 1st, 2nd, and 3rd IPs, respectively, compared to the average experimental uncertainties of 0.03, 1.78, and 2.65 kcal/mol, respectively. The new basis sets are also used in CCSD(T) benchmark calculations of the equilibrium geometries, atomization energies, and heats of formation for Gd{sub 2}, GdF, and GdF{sub 3}. Except for the equilibrium geometry and harmonic frequency of GdF, which are accurately known from experiment, all other calculated quantities represent significant improvements compared to the existing experimental quantities. With estimated uncertainties of about ±3 kcal/mol, the 0 K atomization energies (298 K heats of formation) are calculated to be (all in kcal/mol): 33.2 (160.1) for Gd{sub 2}, 151.7 (−36.6) for GdF, and 447.1 (−295.2) for GdF{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗