Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HARDENING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Comparative study of structure formation and mechanical behavior of age-hardened Ti–Nb–Zr and Ti–Nb–Ta shape memory alloys

This work sets out to study the peculiar effects of aging treatment on the structure and mechanical behavior of cold-rolled and annealed biomedical Ti–21.8Nb–6.0Zr (TNZ) and Ti–19.7Nb–5.8Ta (TNT) (at.%) shape memory alloys by means of transmission electron microscopy, X-ray diffractometry, functional fatigue and thermomechanical testing techniques. Dissimilar effects of aging treatment on the mechanical behavior of Zr- and Ta-doped alloys are explained by the differences in the ω-phase formation rate, precipitate size, fraction and distribution, and by their effect on the alloys' critical stresses and transformation temperatures. Even short-time aging of the TNZ alloy leads to its drastic embrittlement caused by “overaging”. On the contrary, during aging of the TNT alloy, formation of finely dispersed ω-phase precipitates is gradual and controllable, which makes it possible to finely adjust the TNT alloy functional properties using precipitation hardening mechanisms. To create in this alloy nanosubgrained dislocation substructure containing highly-dispersed coherent nanosized ω-phase precipitates, the following optimum thermomechanical treatment is recommended: cold rolling (true strain 0.37), followed by post-deformation annealing (600 °C, 15–30 min) and age-hardening (300 °C, 30 min) thermal treatments. It is shown that in TNT alloy, pre-transition diffraction effects (diffuse reflections) can “mask” the β-phase substructure and morphology of secondary phases. - Highlights: • TNZ alloy is characterized by much higher ω-phase precipitation rate than TNT alloy. • Difference in precipitation rates is linked to the difference in Zr and Ta diffusion mobility. • Aging of nanosubgrained TNZ alloy worsens its properties irrespective of the aging time. • Aging time of nanosubgrained TNT alloy can be optimized to improve its properties.

36 MATERIALS SCIENCE↗

On the material modelling of anisotropy, hardening and failure of sheet metals in the finite strain regime

In this paper, we discuss the application of a newly developed coupled material model of finite anisotropic multiplicative plasticity and continuum damage to the numerical prediction of the forming limit diagram at fracture (FLDF). The model incorporates Hill-type plastic anisotropy, nonlinear Armstrong-Frederick kinematic hardening and nonlinear isotropic hardening. The numerical examples examine the simulation of forming limit diagrams at fracture by means of the so-called Nakajima stretching test. Comparisons with experimental data for aluminium sheets show a good agreement with the finite element results.

36 MATERIALS SCIENCE↗

Modeling of irradiation hardening of iron after low–dose and low–temperature neutron irradiation

Irradiation hardening is a prominent low-temperature degradation phenomena in materials, and is characterized both by an irradiation-induced increase in yield strength along with the loss of ductility. In this paper, a reaction–diffusion cluster dynamics model is used to predict the distribution of vacancy and interstitial clusters in iron following low-temperature (<373 K) and low-dose (<0.1 dpa) neutron irradiation. The predicted microstructure evolutions of high-purity iron samples are compared to published experimental data (positron annihilation spectroscopy and transmission electron microscopy) and show good agreement for neutron irradiation in this regime. The defect cluster distributions are then coupled to a dispersed barrier hardening model that assumes a strength factor, α, which varies with cluster type and size to compute the yield strength increase; the results of which agree reasonably well with tensile tests performed in previous studies. Furthermore, the modeling results presented here compare quite well to the experimental observations in the low-dose regime, and provide insight into the underlying microstructure–property relationships and the need for spatially dependent modeling to accurately predict the saturation behavior of yield strength changes observed experimentally at higher dose levels.

36 MATERIALS SCIENCE↗

Tensile and Fatigue Testing and Material Hardening Model Development for 508 LAS Base Metal and 316 SS Similar Metal Weld under In-air and PWR Primary Loop Water Conditions

This report provides an update on an assessment of environmentally assisted fatigue for light water reactor components under extended service conditions. This report is a deliverable in September 2015 under the work package for environmentally assisted fatigue under DOE’s Light Water Reactor Sustainability program. In an April 2015 report we presented a baseline mechanistic finite element model of a two-loop pressurized water reactor (PWR) for systemlevel heat transfer analysis and subsequent thermal-mechanical stress analysis and fatigue life estimation under reactor thermal-mechanical cycles. In the present report, we provide tensile and fatigue test data for 508 low-alloy steel (LAS) base metal, 508 LAS heat-affected zone metal in 508 LAS–316 stainless steel (SS) dissimilar metal welds, and 316 SS-316 SS similar metal welds. The test was conducted under different conditions such as in air at room temperature, in air at 300 oC, and under PWR primary loop water conditions. Data are provided on materials properties related to time-independent tensile tests and time-dependent cyclic tests, such as elastic modulus, elastic and offset strain yield limit stress, and linear and nonlinear kinematic hardening model parameters. The overall objective of this report is to provide guidance to estimate tensile/fatigue hardening parameters from test data. Also, the material models and parameters reported here can directly be used in commercially available finite element codes for fatigue and ratcheting evaluation of reactor components under in-air and PWR water conditions.

316 Stainless Steel↗

Decline in Radiation Hardened Microcircuit Infrastructure

Two areas of radiation hardened microcircuit infrastructure will be discussed: 1) The availability and performance of radiation hardened microcircuits, and, and 2) The access to radiation test facilities primarily for proton single event effects (SEE) testing. Other areas not discussed, but are a concern include: The challenge for maintaining radiation effects tool access for assurance purposes, and, the access to radiation test facilities primarily for heavy ion single event effects (SEE) testing. Status and implications will be discussed for each area.

performance of radiation hardened microcircuits↗

Taming Metal–Solid Electrolyte Interface Instability via Metal Strain Hardening

Abstract Solid-state lithium metal batteries have emerged as a promising technology for electric vehicles due to their high specific energy and safety potential. Obtaining intimate contact between Li and electrolyte during cell fabrication, however, remains challenging. Adequate fabrication pressure is required to promote close contact, but this pressure can cause Li deformation and penetration into the electrolyte, resulting in poor battery performance. Here, a strategy for addressing this problem is presented by incorporating 3 at% Mg into Li. Unlike pure Li which obeys the Voce hardening law and allows unconstrained deformation, Li–Mg alloy follows the Swift hardening law and strengthens with strain under compression stress. Because of the constrained deformation of Li–Mg, intimate contact with solid electrolytes is possible even at high fabrication pressure (50–65 MPa), resulting in high critical current densities. These findings underscore the importance of understanding Li metal deformation properties to improve solid-state battery performance.

25 ENERGY STORAGE↗

Cylinder Test Correction for Copper Work Hardening and Spall

As a basis for the corrections to be discussed, an analytical equation is first presented for calculating detonation energy densities from copper wall velocities in the Cylinder test. Steinberg-Guinan work hardening is sufficient for the Cylinder problem, between 1 and 60 GPa, with a change of Y o to 0.10 kJ cm –3 for annealed copper. An air gap correction was the first to be applied, which is a function of the initial air gap width and the tilt angle of the cylinder. Irreversible heat loss was also found to be a small error. Spall is calibrated using new copper gun shot data and this energy is also small. The model up through work hardening agrees with the code, which does not contain heat loss or spall, both of which equal the error of repetitive calculation. In conclusion, the effect of the many additions to the original Gurney energy is shown.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Hardening, Softening, and Mechanical Properties in Ultra-High-Strength DP1180 Tailor-Welded Blanks

In this paper, the microstructure, microhardness, tensile behavior, and formability of ultra-high-strength DP1180 tailor-welded blanks have been proposed to exhibit the micro- and macro-features of the hardening and softening phenomena. The microstructural investigation pointed to the effects of the microscale on the hardening mechanisms, such as martensite coarsening and martensite–austenite deficiency. Finally, the microstructural difference led to the increase in hardness, a reduction in cupping height, and also the fracture mode transformation in formability test of dissimilar DP1180–DP590 tailor-welded blanks. Furthermore, the softening mechanism in similar welded structures was also discussed.

36 MATERIALS SCIENCE↗

Strain-Hardening Behavior of Dual-Phase Steel under Multistress States

The complexity and nonuniformity of microdeformation in high-strength dual-phase (DP) steels make it difficult to accurately predict the deformation processes in stamping. Here, in situ experiments under three kinds of stress states and a crystal plasticity finite element (CPFE) model were used to predict the strain-hardening behavior of DP steel. The microdeformation in various deformation stages was extracted from metallographs captured during in situ experiments to calculate the strain partitioning functions of each phase. Then, the multistress state mechanical behavior of DP steel was calculated based on the CPFE model combined with the strain partitioning functions of ferrite and martensite. The calculation results showed that (1) the CPFE model could accurately describe the load–stroke curves of the three experiments and that (2) the stress state had a significant effect on the strain partition ratio and the initial critical resolved shear stress of the material. In addition, the stress–strain curves of DP800 steel were predicted under six stress states; these curves did not coincide and had obvious deviations. Finally, the activity of the grain slip systems and the dislocation evolution were analyzed and discussed to predict the microdeformation and stress state effects on strain-hardening behavior.

36 MATERIALS SCIENCE↗

In Situ Nanoindentation Studies on Detwinning and Work Hardening in Nanotwinned Monolithic Metals

Certain nanotwinned (nt) metals have rare combinations of high mechanical strength and ductility. Here, we review recent in situ nanoindentation studies (using transmission electron microscopes) on the deformation mechanisms of nt face-centered cubic metals including Cu, Ni, and Al with a wide range of stacking fault energy (SFE). Moreover, in nt Cu with low-to-intermediate SFE, detwinning (accompanied by rapid twin boundary migration) occurs at ultralow stress. In Ni with relatively high SFE, coherent {111} twin boundaries lead to substantial work hardening. Twinned Al has abundant {112} incoherent twin boundaries, which induce significant work-hardening capability and plasticity in Al. Finally, twin boundaries in Al also migrate but at very high stresses. Furthermore, molecular dynamics simulations reveal the influence of SFE on deformation mechanisms in twinned metals.

36 MATERIALS SCIENCE↗

Quantitative experimental determination of the solid solution hardening potential of rhenium, tungsten and molybdenum in single-crystal nickel-based superalloys

Here, the solid-solution hardening potential of the refractory elements rhenium, tungsten and molybdenum in the matrix of single-crystal nickel-based superalloys was experimentally quantified. Single-phase alloys with the composition of the nickel solid-solution matrix of superalloys were cast as single crystals, and tested in creep at 980 °C and 30–75 MPa. The use of single-phase single-crystalline material ensures very clean data because no grain boundary or particle strengthening effects interfere with the solid-solution hardening. This makes it possible to quantify the amount of rhenium, tungsten and molybdenum necessary to reduce the creep rate by a factor of 10. Rhenium is more than two times more effective for matrix strengthening than either tungsten or molybdenum. The existence of rhenium clusters as a possible reason for the strong strengthening effect is excluded as a result of atom probe tomography measurements. If the partitioning coefficient of rhenium, tungsten and molybdenum between the γ matrix and the γ' precipitates is taken into account, the effectiveness of the alloying elements in two-phase superalloys can be calculated and the rhenium effect can be explained.

36 MATERIALS SCIENCE↗

Hardening in thermally-aged Fe–Cr binary alloys: Statistical parameters of atomistic configuration

Through exploiting Monte Carlo methodology and molecular dynamics, we computationally simulate the spinodal decomposition of iron–chromium binary alloys and analyze the relationship between the increase of yield strength induced by the phase separation phenomenon, and statistical parameters of the atomistic configuration. We successfully model the experimentally-discovered proportional relationship between the hardness and the variation parameter (or V), and also found that the adequacy of the parameter V as an empirical indicator of hardening is limited, because it does not properly capture short-range atomistic configurations that influence the hardening. We anticipate that the short-range-order parameter has more potential to become universal descriptor of the phenomenon.

36 MATERIALS SCIENCE↗

A precipitation-hardened high-entropy alloy with outstanding tensile properties

Recent studies indicated that high-entropy alloys (HEAs) possess unusual structural and thermal features, which could greatly affect dislocation motion and contribute to the mechanical performance, however, a HEA matrix alone is insufficiently strong for engineering applications and other strengthening mechanisms are urgently needed to be incorporated. In this work, we demonstrate the possibility to precipitate nanosized coherent reinforcing phase, i.e., L1 2 -Ni 3 (Ti,Al), in a fcc-FeCoNiCr HEA matrix using minor additions of Ti and Al. Through thermomechanical processing and microstructure controlling, extraordinary balanced tensile properties at room temperature were achieved, which is due to a well combination of various hardening mechanisms, particularly precipitation hardening. The applicability and validity of the conventional strengthening theories are also discussed. In conclusion, the current work is a successful demonstration of using integrated strengthening approaches to manipulate the properties of fcc-HEA systems, and the resulting findings are important not only for understanding the strengthening mechanisms of metallic materials in general, but also for the future development of high-performance HEAs for industrial applications.

3 dimensional atom probe tomography↗

Influence of deformation induced nanoscale twinning and FCC-HCP transformation on hardening and texture development in medium-entropy CrCoNi alloy

Texture evolution during room-temperature tensile testing of recrystallized equimolar CrCoNi was studied using electron backscatter diffraction and electron channeling contrast imaging on specimens from interrupted tests. Dominant deformation mechanisms included slip at low strains and deformation twinning at larger strains, which were accompanied by the development of a strong <111> texture parallel to the tensile axis. Highly deformed material also contained nanotwin/hcp lamellae, which have previously been hypothesized to act as potent barriers for non-coplanar dislocations. To examine this hypothesis, mean-field modeling was performed using the viscoplastic self-consistent framework with varying ratios for hardening by slip and twinning. In the optimal model, twinning produced approximately three times as much non-coplanar hardening as slip, which is larger than previous observations in other twinning-induced plasticity materials that do not form twin/hcp lamellae. Additional full-field elasto-viscoplastic simulations were performed using the fast Fourier transform (EVP-FFT) method to examine intragranular rotation and the effect of initial grain orientation on the deformation mode. Grains with initial orientations near <111> had the greatest propensity for deformation twinning while grains near <100> were more likely to deform by slip even at large strains. In conclusion, excellent quantitative agreement was obtained between the experiments and EVP-FFT model.

36 MATERIALS SCIENCE↗

Localized corrosion at nm-scale hardening precipitates in Al-Cu-Li alloys

The localized corrosion of Li-containing nm hardening precipitates in the 3rd generation of Al-Cu-Li alloys was investigated based on a quasi in situ approach by sequentially exposing the material to NaCl solution and characterizing the structural, chemical, and electrochemical evolution at atomic scale using electron microscopy, spectroscopy, 3D tomography, electrochemical measurements, and DFT calculations. Localized corrosion of Al 7.5 Cu 4 Li (TB phase) initiated along {001} family of planes through the dealloying of Al and Li due to a low surface work function. Cu was enriched along the Cu (110) // T B (011) // Al (100) orientations on and around corroded T B precipitates. No strong galvanic interactions were observed at the T B and Al matrix interface due to the formation of a Li-C-O rich passivation layer during electrolyte exposure. Similarities and differences between T B and other common Al-Cu-Li precipitates (Al 2 CuLi, Al 6 CuLi 3 , and Al 3 Li) with respect to corrosion are discussed. Overall, the reported corrosion mechanism can assist in the assessment of the localized corrosion susceptibility of precipitation-hardened Al alloys and assist in the design of new alloys.

36 MATERIALS SCIENCE↗

Interaction between alpha-calcium sulfate hemihydrate and superplasticizer from the point of adsorption characteristics, hydration and hardening process

Superplasticizers (SPs), namely sulfonated melamine formaldehyde (SMF) and polycarboxylate (PC), were independently admixed with alpha-calcium sulfate hemihydrate based plaster to improve the material's performance. SMF and PC gave, respectively, 38% and 25% increases in the 2 h bending strength at the optimum dosages of 0.5 wt.% and 0.3 wt.%, which are determined essentially by the maximum water-reducing efficiency. The peak shift of binding energy of Ca2p{sub 3/2} detected by X-ray photoelectron spectroscopy (XPS) suggests that SPs are chemically adsorbed on gypsum surface. A careful examination of the strength development of set plaster allowed the hydration and hardening process to be divided roughly into five stages. SMF accelerates early hydration, while PC decelerates it. Both SPs allowed similar maximum water reductions, giving a more compact structure and a decrease in total pore volume and average pore diameter, and thus leading to higher strengths in the hardened plasters with SPs.

36 MATERIALS SCIENCE↗

Acoustic emission for characterising the crack propagation in strain-hardening cement-based composites (SHCC)

This paper presents the analysis of crack propagation in strain-hardening cement-based composite (SHCC) under tensile and flexural load by using acoustic emission (AE). AE is a non-destructive technique to monitor the development of structural damage due to external forces. The main objective of this research was to characterise the cracking behaviour in SHCC in direct tensile and flexural tests by using AE. A better understanding of the development of microcracks in SHCC will lead to a better understanding of pseudo strain-hardening behaviour of SHCC and its general performance. ARAMIS optical deformation analysis was also used in direct tensile tests to observe crack propagation in SHCC materials. For the direct tensile tests, SHCC specimens were prepared with polyvinyl alcohol (PVA) fibre with three different volume percentages (1%, 1.85% and 2.5%). For the flexural test beam specimens, only a fibre dosage of 1.85% was applied. It was found that the application of AE in SHCC can be a good option to analyse the crack growth in the specimens under increasing load, the location of the cracks and most importantly the identification of matrix cracking and fibre rupture or slippage.

36 MATERIALS SCIENCE↗

The effects of damage and self-healing on impedance spectroscopy of strain-hardening cementitious materials

This work elucidated the effects of damage and self-healing on the frequency-dependent electrical response of strain-hardening cementitious materials. Electrical impedance spectroscopy was conducted before material cracking, during single crack opening, sequential formation of multiple microcracks, and subsequent self-healing of the microcracks. The results revealed that the material complex impedance was strongly influenced by crack opening and crack number; both changed during mechanical straining as well as the self-healing process. A new equivalent circuit model was formulated for predicting the frequency-dependent electrical response of the material during damage evolution and self-healing process. Analyzing the changes of model parameters revealed the mechanisms that contribute to the frequency-dependent electromechanical response of the material. This study generated new experimental data and analytical model coupling the electrical response with damage level in cementitious materials. The new understandings are critical for the next step of realizing damage sensing in strain-hardening cementitious materials through frequency-dependent AC measurements.

36 MATERIALS SCIENCE↗