Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “H2S”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Hydrogen atom initiated chemistry

H Atoms have been created by the photolysis of H2S. These then initiated reactions in mixtures involving acetylene-ammonia-water and ethylene-ammonia-water. In the case of the acetylene system, the products consisted of two amino acids, ethylene and a group of primarily cyclic thio-compounds, but no free sulfur. In the case of the ethylene systems, seven amino acids, including an aromatic one, ethane, free sulfur, and a group of solely linear thio-compounds were produced. Total quantum yields for the production of amino acids were about 3 x 10 to the -5th and about 2 x 10 to the -4th with ethylene and acetylene respectively as carbon substrates. Consideration is given of the mechanism for the formation of some of the products and implications regarding planetary atmosphere chemistry, particularly that of Jupiter, are explored.

Hong, J. H.↗

Identification of gaseous SO2 and new upper limits for other gases on Io

The identification of gaseous sulfur dioxide on Io by Voyager 1 is reported, and preliminary upper limits for other atmospheric gases are presented. Averaged spectra taken by the Voyager IRIS experiment in the range of 1,000 to 1,200/cm are interpreted as containing three fundamental sulfur dioxide bands, with intensities most nearly corresponding to an atmospheric model with a sulfur dioxide abundance of 0.2 cm atm. Upper limits for COS, CS2, SO3, H2S, CO2, O3, N2O, H2O, CH4, NH3 and HC1, not detected in the spectra, were calculated on the basis of the radiative transfer equation for temperatures of 130 and 250 K; a depletion of hydrogen, carbon and nitrogen is noted. It is suggested that a SO2 outgassing from a cooling sulfur extrusion is the major source of the observed atmospheric SO2.

Pearl, J.↗

Spectral evidence for sublimates and adsorbates on Io

The results of laboratory studies of sulfur adsorbates and sublimates are presented to explain the observed spectral reflectance of Io. The hemispherical and bidirectional spectral reflectances of typical sublimate phases of Na2S, NaHS, K2S and mixtures thereof with free sulfur were measured under varied temperature and particle-irradiation conditions. It is found that Na2S, K2S and NaHS have absorption bands at all the key wavelengths of Io's spectrum in the UV and visible ranges, and as a group can account for much of Io's spectral reflectance in the 0.25- to 5.0-micron range. It is also concluded that adsorbed gases, possibly H2S and SO2, believed to be formed by reactions in the sublimate phase, also contribute to the IR spectrum of Io's surface.

Nash, D. B.↗

Hot-atom synthesis of organic compounds on Jupiter

Results of recent laboratory 'simulations' of photochemical processes on Jupiter are combined with available data on mixing rates and exposure times in the Jovian atmosphere to give quantitative predictions of the rate at which hot-atom reactions produce organic molecules. It is shown that abstraction reactions on methane by hot H atoms from solar UV photolysis of H2S will produce no more than 4 times 10 to the -17th power g/sq cm/sec for a steady-state mole fraction of total organics of approximately 10 to the -16th power. This is roughly 10 to the 7th power times less than the limit of detection of the most sensitive gas analysis experiments ever flown on a spacecraft. By far the most common organic molecule produced by this mechanism is CH3SH, methyl mercaptan, which is produced at a rate at least 600 times smaller than the rate of production of ethane by direct photolysis of CH4 at high altitudes.

Lewis, J. S.↗

On the clouds of Uranus

Several models for the atmosphere of Uranus are considered. If the H2 abundance is less than 250 km-am and the internal heat source is only a few percent of the total emitted energy then the cloud at the base of the atmosphere may be composed of solid CH4 particles, while if the H2 abundance is greater than 250 km-am or if the internal heat source is near the current upper limit of 35% of the total emitted energy the cloud at the base of the atmosphere may be composed of either solid NH3 or H2S particles.

Macy, W., Jr.↗

Microbial Sulfate Reduction Measured by an Automated Electrical Impedance Technique

Electrical impedance measurements are used to investigate the rates of sulfate reduction by pure cultures of and sediments containing sulfur-reducing bacteria. Changes in the electrical impedance ratios of pure cultures of Desulfovibrio aestuarii and samples of reduced sediments from San Francisco Bay were measured by a Bactometer 32, and sulfate reduction was followed by measuring the incorporation of (S-35) sulfate into metal sulfides. The growth of the bacteria in pure culture is found to result in an increase of 0.2200 in the impedance ratio within 24 h, accompanied by increases in protein, ATP, sulfide and absorptance at 660 nm, all of which are inhibited by the addition of molybdate. Similar responses were observed in the sediments, although impedance ratio responses were not completely inhibited upon the addition of molybdate, due to the presence of nonsulfate-respiring microorganisms. Experiments conducted with sterile media and autoclaved sediments indicate that the presence of H2S together with iron is responsible for the impedance effect, and sulfate reduction rates ranging between 0.85 and 1.78 mmol/l per day are estimated for the sediments by the impedance technique.

Oremland, R. S.↗

Magnetite-sulfide-metal complexes in the Allende meteorite

A model of liquid immiscibility is presented that seemingly accounts for the sulfide-oxide-metal complexes that are present in olivine-rich chondrules in the Allende meteorite. The four major assemblages that are identified are: (1) magnetite + Ni-Fe metal; (2) magnetite + troilite + Ni-Fe metal; (3) magnetite + troilite + pentlandite + Ni-Fe metal; and (4) troilite + or - pentlandite. Specific attention is focused on oxide-metal associations and experimental data confirm earlier suggestions that magnetite results from the oxidation of an initially high-Fe-content metal alloy. Oxidation decreases the modal abundance of the Fe metal and this is accompanied by substantial increases in Ni contents which reach a maximum of approximately 70 wt % Ni. The proposed oxidation mechanism is entirely consistent with condensation of Fe-metal + olivine (Fa5) that subsequently reequilibrated at lower temperatures. Although the sulfide constituents could also have formed by the reaction of Fe-Ni metal + gaseous H2S, sulfide immiscibility under increased conditions of partial O2 pressure is the preferred process.

Haggerty, S. E.↗

Molecular diagnostics of interstellar shocks

The chemistry of molecules in shocked regions of the interstellar gas is considered and calculations are carried out for a region subjected to a shock at a velocity of 8 km/sec. Substantial enhancements are predicted in the concentrations of the molecules H2S, SO, and SiO compared to those anticipated in cold interstellar clouds.

Hartquist, T. W.↗

The fate of the hydroxyl radical in the earth's primitive atmosphere and implications for the production of molecular oxygen

Behavior of the hydroxyl radical produced by the photolysis of water vapor in the earth's early atmosphere is examined. Because of the substantial OH radical reactivity with trace species (CO, HCl, SO2, H2S, NH3, and CH4) the formation of molecular oxygen may be prevented, even at a trace species mixing ratio. The photolysis rate of H2O, with corrections for hydrogen exospheric escape, is capable of describing the oxidation of the atmosphere and crust but may not be used to determine the rate of molecular oxygen generation without consideration of the various OH-trace species reactions.

Vander Wood, T. B.↗

Oxidation state of the atmosphere and crust of Venus from Pioneer Venus results

Recent spacecraft observations of Venus permit a detailed model of sulfur chemistry in the atmosphere-lithosphere system. Pioneer Venus experiments confirm that, as predicted, COS and H2S are dominant over SO2 in the lower atmosphere, and that the equilibrium concentrations of S2 and S3 are significant. Many criteria serve to bracket the oxidation state of the crust: it is nearly certain that the S2(2-)/SO4(2-) buffer regulates the oxygen fugacity, and that FeO is at least as abundant as F2O3 in crustal silicates. A highly oxidized crust (as, for example, would result from O2 absorption complementary to escape of vast amounts of H2) is incompatible with the gas-phase sulfur chemistry. If the Pioneer Venus mass spectrometer estimates of the abundance of sulfur gases are correct, earth-like models for the bulk composition of Venus are seriously in error, and a far lower FeO content is required for Venus.

Lewis, J. S.↗

Pioneer Venus gas chromatography of the lower atmosphere of Venus

A gas chromatograph mounted in the Pioneer Venus sounder probe measured the chemical composition of the atmosphere of Venus at three altitudes. Ne, N2, O2, Ar, CO, H2O, SO2, and CO2 were measured, and upper limits set for H2, COS, H2S, CH4, Kr, N2O, C2H4, C2H6, and C3H8. Simulation studies have provided indirect evidence for sulfuric acid-like droplets and support the possibility of water vapor at altitudes of 42 and 24 km. The paper discusses the implications of these results for the origin, evolution, and present state of Venus' atmosphere.

Oyama, V. I.↗

Interstellar sulfur chemistry

The results of a chemical model of SO, CS, and OCS chemistry in dense clouds are summarized. The results are obtained from a theoretical study of sulfur chemistry in dense interstellar clouds using a large-scale time-dependent model of gas-phase chemistry. Among the results are the following: (1) owing to activation energy, the reaction of CS with O atoms is efficient as a loss mechanism of CS during the early phases of cloud evolution or in hot and oxygen-rich sources such as the KL nebula; (2) if sulfur is not abnormally depleted in dense clouds, then the observed abundances of SO, SO2, H2S, CS, OCS, H2CS, and SiS indicate that sulfur is mostly atomic in dense clouds; and (3) OCS is stable against reactions with neutral atoms and radicals in dense clouds.

Prasad, S. S.↗

The mineralogy and the isotopic composition of sulfur in hydrothermal sulfide/sulfate deposits on the East Pacific Rise, 21 deg N latitude

The mineralogy and isotopic composition of sulfur found in hydrothermal deposits associated with five groups of vents along the ridge axis of the East Pacific Rise near 21 deg N latitude are investigated. Solid samples of mixed sulfides and sulfates from mounds, chimneys and the surrounding sediment as well as fresh basaltic glass were examined with a portable X-ray fluorescence spectrometer and by scanning electron microscopy, X-ray diffractometry, and electron microprobe analysis. For the three vents of exit temperature close to 350 C, the chimneys are found to be rich in copper sulfides, while for those of temperatures around 300 C, zinc sulfide is found to predominate. The major sulfides found in the chimneys include wurtzite, chalcopyrite, pyrite and cubanite, with anhydrite the dominant sulfate. Significant mineralogical differences are found between active and inactive vents. The isotopic composition of sulfur in anhydrites from active vents is observed to be close to that of sea water and consistent with a derivation from sea water sulfate. The isotopic composition of sulfur in the sulfide minerals is explained in terms of precipitation from solutions with reduced sulfur derived from basalts or basaltic magmas, and sea water sulfate. Finally, the deposits are interpreted as the results of the mixing of H2S-dominated hydrothermal fluids with cold sea water near the sea floor.

Styrt, M. M.↗

Kinetics of the gas-phase reaction between hydroxyl and carbonyl sulfide over the temperature range 300-517 K

By use of a discharge-flow resonance-fluorescence method the rate constant for the title reaction has been measured at five temperatures in the range 300-520 K. The Arrhenius expression is k(OH + OCS) = (1.3 + or - 0.3) x 10 to the -12th exp/-(2300 + or - 100)/T/ cu cm/s. Mass spectrometry has been used to detect the product HS and to collect some information about its reactivity. This study has carefully avoided the pitfalls associated with possible photolysis of reactants and complications due to H2S impurity in carbonyl sulfide that may have marred previous studies. This study has confirmed that the rate constant for this reaction is so much lower than the value originally used in computer modeling of the upper and lower atmosphere that conclusions about the relative importance of photolysis of OCS and of the reaction OH + OCS in the stratosphere must now be reassessed. The reaction OH + OCS has little significance for atmospheric chemistry.

Leu, M.-T.↗

Infrared absorption of sulfur bearing compounds

The sulfur bearing molecules of most interest in studies of planetary atmospheres are the simple, stable hydrides and oxides, H2S, H2SO4, SO2, and SO3, and the carbon containing species OCS and CO2. For interpreting spectroscopic observations, the properties that must be known are: transition frequencies, transition intensities, transition assignments in terms of quantum number assignments and lower state energy levels, and pressure broadening constants (including their temperature dependence).

Maki, A.↗

An investigation of the kinetics of hydrogen chemisorption on iron metal surfaces

The isothermal kinetics of H2, H2S, and O2 chemisorption onto epitaxially grown (III) oriented Fe films were studied. The measurements were made using the techniques of chemisorption induced resistance change and Auger electron spectroscopy (for adsorbed sulfur and oxygen). Also the origin of the chemisorption induced resistance change for these systems and its applicability to kinetic measurements were established. The chemisorption kinetics were interpreted as dissociative chemisorption via an adsorbed molecular species. The applicable rate constants were established. In none of the studies were the rate constants observed to be coverage dependent. By comparing the temperature dependence of the rate constants with absolute rate theory, the binding energies and activation energies of all the kinetic processes were obtained for the H2/Fe system. The initial sticking coefficient was pressure dependent for both the H2/Fe and H2S/Fe systems. This results from the step between the adsorbed molecular state and the dissociated chemisorbed state being the rate limiting step for absorption at certain pressures and temperatures. Estimates were obtained for the temperature dependence of the rate constants for the O2/Fe system.

Shanabarger, M. R.↗

The molecular cloud associated with NGC 7538

CO maps and preliminary H2S and H2CO data for the molecular cloud associated with NGC 7538 are used to compare the molecular distributions with those of ionized, neutral, and molecular hydrogen and dust. South of the H II regions is a ridge of high (C-13)O column density with cold, self-absorbed H I just beyond it. A dense clump within the ridge is found adjacent to the H II region in the southeast, and a lower density region of expanding gas is seen next to the H II region in the southwest. NGC 7538 is the first region which appears to show observational evidence for a molecular dissociation wave.

Dickel, H. R.↗

Molecules in interstellar clouds

The physical conditions and chemical compositions of the gas in interstellar clouds are reviewed in light of the importance of interstellar clouds for star formation and the origin of life. The Orion A region is discussed as an example of a giant molecular cloud where massive stars are being formed, and it is pointed out that conditions in the core of the cloud, with a kinetic temperature of about 75 K and a density of 100,000-1,000,000 molecules/cu cm, may support gas phase ion-molecule chemistry. The Taurus Molecular Clouds are then considered as examples of cold, dark, relatively dense interstellar clouds which may be the birthplaces of solar-type stars and which have been found to contain the heaviest interstellar molecules yet discovered. The molecular species identified in each of these regions are tabulated, including such building blocks of biological monomers as H2O, NH3, H2CO, CO, H2S, CH3CN and H2, and more complex species such as HCOOCH3 and CH3CH2CN.

Irvine, W. M.↗