Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Geologic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Fallon FORGE: Seismic Reflection Profiles

Newly reprocessed Naval Air Station Fallon (1994) seismic lines: pre-stack depth migrations, with interpretations to support the Fallon FORGE (Phase 2B) 3D Geologic model. Data along seven profiles (>100 km of total profile length) through and adjacent to the Fallon site were re-processed. The most up-to-date, industry-tested seismic processing techniques were utilized to improve the signal strength and coherency in the sedimentary, volcanic, and Mesozoic crystalline basement sections, in conjunction with fault diffractions in order to improve the identification and definition of faults within the study area.

15 GEOTHERMAL ENERGY↗

Characterization of Offshore Storage Resource Potential in the Central Planning Area of the Gulf of Mexico

This report contains a brief overview of the several studies that provide the basis for this work and details the reservoir characterization efforts that have been completed to date. Briefly, geological characterization data suggests that the deep-water reservoirs are the result of the interplay between turbidite depositional systems and salt tectonics. Project Partners have estimated the CO 2 storage capacity associated with saline reservoirs and that associated with CO 2 -Enhanced Oil Recovery (EOR) in the state waters of Louisiana. In addition, Project Partners have conducted a detailed analysis of CO 2 storage potential associated with CO 2 -EOR in the central planning area of the GOM. This work estimates that 3,140 million metric tonnes of CO 2 can be stored in optimal reservoirs of the shallow- and deep-water central GOM. A reduced order modeling and machine learning approach is introduced that will be used to evaluate CO 2 storage capacity and plume dynamics for down-selected, reservoir-specific, saline characterization. Last, a brief discussion establishes how the data presented in this report will support future work.

02 PETROLEUM↗

Identification of Preferential Recharge Zones in Karst Systems Based on the Correlation between the Spring Level and Precipitation: A Case Study from Jinan Spring Basin

The Jinan spring basin is located in the karst area of northern China, where springs serve as important sources of water supply. Several studies on spring protection and water supply have been carried out, and scholars have developed some laws on local groundwater flow dynamic and characteristics of aquifer structures. Unfortunately, there is a lack of detailed research on preferential recharge zones, which are the main recharge pathways of springs. Therefore, this research focuses on identifying preferential recharge zones based on the correlation between the spring level and precipitation. The results show that when precipitation is more intense or lasts longer, there is a stronger correlation between spring level and precipitation. It has been established that the precipitation at Donghongmiao station has the closest relationship with the dynamic of Baotu spring, which is found to be the most significant contribution to spring preservation. Two potential preferential recharge zones in the Jinan spring basin are detected through correlation analysis and geological exploration data. These findings support spring protection and water supply projects in karst regions.

58 GEOSCIENCES↗

A Socio-Technical Perspective on Repository Monitoring - 12229

Monitoring geological repositories for high-activity radioactive wastes has both technical and social dimensions, which are closely interrelated. To investigate the implications of this for geological disposal, data on experts' expectations of repository monitoring and the functions that it is expected to serve were analysed. The analysis drew on strategic and technical documents on monitoring produced by national agencies and by international organisations or projects; interviews with specialists in radioactive waste management organisations on monitoring and on their perceptions of societal concerns and expectations; and observations from technical workshops on repository monitoring. Three main rationales for monitoring were found: performance confirmation; decision support in a step-wise process; and public and stakeholder confidence building. The expectation that monitoring will enhance public confidence is then examined from a social scientific perspective and the potential for and challenges to using monitoring in this way are reviewed. In conclusion, implications for stakeholder engagement in the development of monitoring objectives and strategies are discussed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Online Interactive Reporting of Groundwater Monitoring and Remediation Progress at the Hanford Site, Washington - 16485

DOE annually publishes a groundwater monitoring report and separate groundwater remediation summary reports to comply with reporting and regulatory requirements for the Hanford Site, located in southeastern Washington State. The reports describe year-over-year groundwater monitoring and remediation progress. The annual groundwater monitoring report provides a summary of groundwater monitoring for chemical and radioactive liquid waste releases to the soil that contaminated groundwater from past operations at the site. Content initially consisted of paper reports with static electronic copies available online. Based on an initiative from DOE to provide additional transparency of data and data interpretations presented in the reports, companion interactive versions of the reports were deployed online starting in 2012. The online version provides readers with map-based tools and links to supporting documents and reference materials; individual users can read the reports at their own personal level of expertise and interactively explore groundwater contaminant plume evolution, analytical data, site geology, and remediation system performance. An online user's guide and tutorials for each tool are also provided to assist the user with the overall application and individual tools. The online reports are available at: http://www.hanford.gov/page.cfm/SoilGroundwaterAnnualReports. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development of Wireless Data Transmission System for the Monitoring in Geological Disposal of Radioactive Waste - 12063

The authors have been developing a wireless data transmission system to monitor the performance of a geological disposal system for radioactive waste. The system's concepts, advantages, and a recent development focused on reducing transmitter size to suit narrow spaces such as bentonite buffers and boreholes. A wireless transmitter with a built-in temperature sensor and a connector for external sensors has been developed, measuring 130 mm in length and 50 mm in diameter. The capability of the transmitter was confirmed by transmission tests on the ground and in a bentonite block. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Interactive web mapping tools and custom subsurface cross-sections for interdisciplinary geologic investigation

Using Python-based geospatial analytics, open-source web mapping technologies, geophysical data models, and subsurface stratigraphy models from the Regional Geology Geologic Framework Model database assembled by Los Alamos National Laboratory, we developed a suite of web-based geologic investigation tools to identify and understand subsurface structures and geophysical properties concerning salt and shale formations within the contiguous United States. Coupled with a web map interface, these tools allow for the interactive visualization of various geologic data and demonstrate the ability to quickly generate custom subsurface cross-sections, borehole charts, and diagrams for azimuthal orientation data. These capabilities were developed for stakeholder and researcher use to facilitate informed decision making for spent nuclear waste disposition. However, these capabilities provide a flexible model for a variety of subsurface investigation needs, and we have demonstrated this flexibility by adapting these tools to meet visualization needs for various subsurface models within a web-based platform.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

WELLBASE - An Interactive Platform for Wellbore Material Assessment

This project seeks to build an open-source wellbore material data repository with adequate material performance and contextual data to support Geological Carbon Storage (GCS). By appropriately evaluating the data types as mentioned earlier made available by the WELLBASE tool, stakeholders can make more informed decisions regarding well selections, risk assessment, and economic analysis for geologic carbon storage projects. Advanced Natural Language Processing models and other custom python scripts will be deployed in an automated process to extract unstructured data from documents, reports, and web applications and subsequently parse to more usable formats. The processed data will then be integrated into a robust and comprehensive database architecture, optimizing data accessibility, and usability for analytical purposes. The final data products will be accessible through a user-friendly visualization platform that will allow users to query and visualize the data, as well as download data in usable formats.

Tetteh, Daniel A.↗

Fallon FORGE: GIS and Downhole Well Lithology Data

ArcGIS Map Package with MT Station Locations, 2D Seismic Lines, Well data, Known Regional Hydrothermal Systems, Regional Historic Earthquake Seismicity, Regional Temperature Gradient Data, Regional Heat Flow Data, Regional Radiogenic Heat Production, Local Geology, Land Status, Cultural Data, 2m Temperature Probe Data, and Gravity Data. Also a detailed down-hole lithology notes are provided.

15 GEOTHERMAL ENERGY↗

Statistical Analysis and Geologic Evaluation of Laboratory-Derived Physical Property Data for Selected Nevada Test Site Core Samples of Non-Zeolitized Tuffs

A statistical analysis and geologic evaluation of recently acquired laboratory-derived physical property data are being performed to better understand and more precisely correlate physical properties with specific geologic parameters associated with non-zeolitized tuffs at the Nevada Test Site. Physical property data include wet and dry bulk density, grain density (i.e., specific gravity), total porosity, and effective porosity. Geologic parameters utilized include degree of welding, lithology, stratigraphy, geographic area, and matrix mineralogy (i.e., vitric versus devitrified). Initial results indicate a very good correlation between physical properties and geologic parameters such as degree of welding, lithology, and matrix mineralogy. However, physical properties appear to be independent of stratigraphy and geographic area, suggesting that the data are transferrable with regards to these two geologic parameters. Statistical analyses also indicate that the assumed grain density of 2.65 grams per cubic centimeter used to calculate porosity in some samples is too high. This results in corresponding calculated porosity values approximately 5 percent too high (e.g., 45 percent versus 40 percent), which can be significant in the lower porosity rocks. Similar analyses and evaluations of zeolitic tuffs and carbonate rock physical properties data are ongoing as well as comparisons to geophysical log values.

58 GEOSCIENCES↗

Geoanalytical Evaluation of Saline Storage (GEESS) Geodatabase v2.0

The Geoanalytical Economic Evaluation of Saline Storage (GEESS) geodatabase was developed to support the United States Department of Energy (DOE) and National Energy Technology Laboratory (NETL) in their geologic carbon storage efforts by characterizing saline geologic formations present in the FECM/NETL CO2 Saline Storage Cost Model (CO2_S_COM) [1]. Using publicly available literature and data, the GEESS geodatabase characterizes 57 geologic formations across the lower-48 U.S. states in what are called Fully Integrated Geodatabases (FIGs). The FIG is a vector polygon feature containing thousands or tens of thousands of individual polygons, which each contain discrete geologic parameter values. A list of the critical geologic parameters that are characterized in the GEESS geodatabase are described in the “Processing Steps and Workflow” part of the ReadMe file, as well as the Data Catalog accompanying the GEESS geodatabase. The FIG is the basis of the GEESS geodatabase and is the direct representation of the collected geologic data. In addition to the FIG, the GEESS system contains grid files. Due to the complexity of the FIGs, grids are used to sample the geologic data so they can be exercised within CO2_S_COM. The grid files contain the geologic data sampled from the FIG, as well as estimates of “Plume Uncertainty Diameter” and “First-year Break-even Price of CO2” derived from CO2_S_COM based on the GEESS grid data.

carbon↗

Automatic Calibration of a Geomechanical Model from Sparse Data for Estimating Stress in Deep Geological Formations

Summary In this study, we demonstrate geomechanical modeling with fully automatic parameter calibration to estimate the full geomechanical stress fields of a prospective US carbon dioxide (CO2) storage site, based on sparse measurement data. The goal is to compute full stress tensor field estimates (principal stresses and orientations) that are maximally compatible with observations within the constraints of the model assumptions, thereby extending pointwise, incomplete partial stress measurement to a simulated full formation stress field, as well as a rough assessment of the associated error. We use the Perch site, located in Otsego County, Michigan, USA, as our case study. The input data consist of partial stress tensor information inferred from in-situ borehole tests, geophysical well logs, and processing of seismic data. A static earth model (SEM) of the site was developed, and geomechanical simulation functionality of the open-source MATLAB Reservoir Simulation Toolbox (MRST) was used to model the stress field. Adjoint-based nonlinear optimization was used to adjust boundary conditions and material properties to calibrate simulated results of observations. Results were interpreted through a Bayesian framework. The focus of this paper is to demonstrate how the fully automatic calibration procedure works and discuss the results obtained; it does not attempt a detailed analysis of the stress field in the context of the proposed CO2 storage initiatives. Our work is part of a larger effort to noninvasively determine in-situ stresses in deep formations considered for CO2 storage. Guided by previously published research on geomechanical model calibration, our work presents a novel calibration approach supporting a potentially large number of linear or nonlinear calibration parameters to produce results optimally agreeing with available measurements and thus extend partial pointwise estimates to full tensor fields compatible with the physics of the site.

Engineering↗

Fallon FORGE 3D Geologic Model

An x,y,z scattered data file for the 3D geologic model of the Fallon FORGE site. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding algorithm. The data file is tabular data in a text file, with lithology data associated with X,Y,Z grid points. All the relevant information is in the file header (the spatial reference, the projection etc.) In addition all the fields in the data file are identified in the header.

15 GEOTHERMAL ENERGY↗

Geothermal Data Gap Analysis Over the Western US

NREL, as part of the Play Fairway Analysis Retrospective, compiled and mapped publicly available geologic and geophysical data in relation to the 2008 USGS geothermal potential analysis. Included in this submission are maps displaying the publicly available data for LIDAR coverage, aeromagnetic coverage, gravity station locations, and geologic map coverage over the Western United States.

15 GEOTHERMAL ENERGY↗

QA/QC of the East River, Colorado, discharge and geochemical time series datasets (Almont, BCC, and Pump House) to be used for modeling of hydrogeochemical balance

The following datasets were QA/QC-ed (Quality Assurance/Quality Control): 1. Brush Creek Confluence (BCC) discharge data (from Helen Malenda, USGS, Colorado School of Mines), which were calculated using the pressure transducer data and rating curves. The original 15 min time series data were presented as mean daily discharge. 2. Almont discharge data from United States Geological Survey (USGS). The original data were in 15 min time intervals, and were averaged to mean daily discharge time series. 3. Pump House discharge data as mean daily discharge (downloaded from the SFA portal). 4. BCC and Pump House chemistry data from SFA data portal and/or original spreadsheets provided by Roelof Versteeg. The following challenging QA/QC problems of the datasets were resolved: Missing data with the duration of gaps up to >1 month; Duplicated dates; Anomalies and outliers of discharge and concentrations; Time stamps of measurements of the discharge and concentrations are not aligned (hydrogeochemical balance calculations require the timestamps to be aligned). All QA/QC-ed datasets are given as csv files. The csv files were prepared using the xts files with multiple worksheets, which are also included in the data packages. Figures of the QA/QC-ed datasets are given in the jpeg and pdf formats. The QA/QC-ed datasets have been used to quantify discharge and chemical concentrations in river water in order to understand riverine exports of water and dissolved constituents in the East River watershed. These datasets served as a basis in the presentation given by P. Fox et al. at the 2021 Goldschmidt Conference.

54 ENVIRONMENTAL SCIENCES↗

Three-dimensional geologic mapping to assess geothermal potential: examples from Nevada and Oregon

Geologic structure plays an important role in controlling fluid flow in geothermal systems. In particular, very complex structural settings, consisting of many closely spaced and intersecting faults, host many geothermal systems. To elucidate the key geologic factors that affect fault-controlled geothermal circulation, it is critical to precisely characterize the structural and stratigraphic geometries in these complex settings. Here, we present a methodology and the results of 3D geologic analyses of two geothermal systems in the Basin and Range, USA. This methodology is a quantitative and geologically focused technique that can be used to precisely characterize geothermal areas, in a time when future geothermal growth demands increased exploration precision and efficiency. Surficial and subsurface geologic and geophysical data are synthesized in the construction of detailed 3D geologic maps of geothermal areas. Based on these 3D geologic maps, we examine several geologic attributes that control permeability development and geothermal fluid flow along faults. We use the stress state of faults and the distribution of structural discontinuities (i.e., fault intersections and fault terminations) to identify locations of upflow along faults in these geothermal systems. These results and the methodology presented herein are directly applicable to structurally controlled geothermal fields in the Basin and Range and worldwide. As development focus shifts toward blind geothermal resources, integration of precisely characterized subsurface structural information into exploration methods will be increasingly critical to continued growth in geothermal exploration and development.

15 GEOTHERMAL ENERGY↗