Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GAUSS FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Algorithms for calculating mass-velocity and Darwin relativistic corrections with n-electron explicitly correlated Gaussians with shifted centers

Algorithms for calculating the leading mass-velocity (MV) and Darwin (D) relativistic corrections are derived for electronic wave functions expanded in terms of n-electron explicitly correlated Gaussian functions with shifted centers and without pre-exponential angular factors. The algorithms are implemented and tested in calculations of MV and D corrections for several points on the ground-state potential energy curves of the H{sub 2} and LiH molecules. The algorithms are general and can be applied in calculations of systems with an arbitrary number of electrons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Constraining scale-dependent non-Gaussianity with future large-scale structure and the CMB

We forecast combined future constraints from the cosmic microwave background and large-scale structure on the models of primordial non-Gaussianity. We study the generalized local model of non-Gaussianity, where the parameter f{sub NL} is promoted to a function of scale, and present the principal component analysis applicable to an arbitrary form of f{sub NL}(k). We emphasize the complementarity between the CMB and LSS by using Planck, DES and BigBOSS surveys as examples, forecast constraints on the power-law f{sub NL}(k) model, and introduce the figure of merit for measurements of scale-dependent non-Gaussianity.

79 ASTRONOMY AND ASTROPHYSICS↗

Characteristics of the 2 m long scintillation counters measured by detecting 90 MeV protons

The characteristics of scintillation counters measured in a 90-MeV proton beam have been presented. Two-meter long scintillators BC-404 and BC-408, which were viewed from both ends with photoelectron multipliers R1828-01 (PMT) have been used. Both the amplitude and time distributions of the PMT signals are well described by the Gaussian function. It turned out that the amplitude resolution σ(А)/А weakly depends on the type of scintillator and the proton position along the counter, and lies in the interval between 4 and 5%. The best time resolution σ(T) is about 50 ps near the counter ends and 63 ps at the center.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Modeling and optimization of photon pair sources based on spontaneous parametric down-conversion

We address the problem of efficient modeling of photon pairs generated in spontaneous parametric down-conversion and coupled into single-mode fibers. It is shown that when the range of relevant transverse wave vectors is restricted by the pump and fiber modes, the computational complexity can be reduced substantially with the help of the paraxial approximation, while retaining the full spectral characteristics of the source. This approach can serve as a basis for efficient numerical calculations or can be combined with analytically tractable approximations of the phase-matching function. We introduce here a cosine-Gaussian approximation of the phase-matching function that works for a broader range of parameters than the Gaussian model used previously. The developed modeling tools are used to evaluate characteristics of the photon pair sources such as the pair production rate and the spectral purity quantifying frequency correlations. Strategies to generate spectrally uncorrelated photons, necessary in multiphoton interference experiments, are analyzed with respect to trade-offs between parameters of the source.

74 ATOMIC AND MOLECULAR PHYSICS↗

Identification of subsurface structures using electromagnetic data and shape priors

We consider the inverse problem of identifying large-scale subsurface structures using the controlled source electromagnetic method. To identify structures in the subsurface where the contrast in electric conductivity can be small, regularization is needed to bias the solution towards preserving structural information. We propose to combine two approaches for regularization of the inverse problem. In the first approach we utilize a model-based, reduced, composite representation of the electric conductivity that is highly flexible, even for a moderate number of degrees of freedom. With a low number of parameters, the inverse problem is efficiently solved using a standard, second-order gradient-based optimization algorithm. Further regularization is obtained using structural prior information, available, e.g., from interpreted seismic data. The reduced conductivity representation is suitable for incorporation of structural prior information. Such prior information cannot, however, be accurately modeled with a gaussian distribution. To alleviate this, we incorporate the structural information using shape priors. The shape prior technique requires the choice of kernel function, which is application dependent. We argue for using the conditionally positive definite kernel which is shown to have computational advantages over the commonly applied gaussian kernel for our problem. Numerical experiments on various test cases show that the methodology is able to identify fairly complex subsurface electric conductivity distributions while preserving structural prior information during the inversion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Efficient simulation of the impact of interface grading on the transport and optical properties of semiconductor heterostructures

An efficient model is proposed to evaluate the impact of interface grading on the properties of semiconductor heterostructures. In the plane-wave approximation, the interface grading is taken into account by simply multiplying the Fourier components of the potential by a Gaussian function, which results only in a very small increase of the computation time. We show that the interface grading may affect the transition energies, the field strength for resonant coupling of subbands, and even the miniband formation in complex systems such as quantum-cascade lasers. This model provides a convenient tool for the incorporation of interface grading into the design of heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Prediction of {sup 1}P Rydberg energy levels of beryllium based on calculations with explicitly correlated Gaussians

Benchmark variational calculations are performed for the seven lowest 1s{sup 2}2s np ({sup 1}P), n = 2…8, states of the beryllium atom. The calculations explicitly include the effect of finite mass of {sup 9}Be nucleus and account perturbatively for the mass-velocity, Darwin, and spin-spin relativistic corrections. The wave functions of the states are expanded in terms of all-electron explicitly correlated Gaussian functions. Basis sets of up to 12 500 optimized Gaussians are used. The maximum discrepancy between the calculated nonrelativistic and experimental energies of 1s{sup 2}2s np ({sup 1}P) →1s{sup 2}2s{sup 2} ({sup 1}S) transition is about 12 cm{sup −1}. The inclusion of the relativistic corrections reduces the discrepancy to bellow 0.8 cm{sup −1}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Basis functions for electronic structure calculations on spheres

We introduce a new basis function (the spherical Gaussian) for electronic structure calculations on spheres of any dimension D. We find general expressions for the one- and two-electron integrals and propose an efficient computational algorithm incorporating the Cauchy-Schwarz bound. Using numerical calculations for the D = 2 case, we show that spherical Gaussians are more efficient than spherical harmonics when the electrons are strongly localized.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

{sup 1}D states of the beryllium atom: Quantum mechanical nonrelativistic calculations employing explicitly correlated Gaussian functions

Very accurate finite-nuclear-mass variational nonrelativistic calculations are performed for the lowest five {sup 1}D states (1s{sup 2} 2p{sup 2}, 1s{sup 2} 2s{sup 1} 3d{sup 1}, 1s{sup 2} 2s{sup 1} 4d{sup 1}, 1s{sup 2} 2s{sup 1} 5d{sup 1}, and 1s{sup 2} 2s{sup 1} 6d{sup 1}) of the beryllium atom ({sup 9}Be). The wave functions of the states are expanded in terms of all-electron explicitly correlated Gaussian functions. The exponential parameters of the Gaussians are optimized using the variational method with the aid of the analytical energy gradient determined with respect to those parameters. The calculations exemplify the level of accuracy that is now possible with Gaussians in describing bound states of a four-electron system where some of the electrons are excited into higher angular states.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effect of quantum dot size and size distribution on the intersublevel transitions and absorption coefficients of III-V semiconductor quantum dot

The intersublevel absorption peak energy and absorption coefficient of non-uniform quantum dot (QD) ensembles are calculated analytically. The effect of size variations and size distribution of QDs on their energy states is analyzed. The dots are considered as a quantum box with finite potential at the barriers and the size distribution described by a Gaussian function. The influence of the aspect ratio (base to height ratio) of the QDs on the optical transitions is studied. Our model predicts the dot size (height and base) accurately to determine the absorption peaks and corresponding absorption coefficient. We also compute the absorption coefficient of the QD with different size distributions to verify the results calculated using this model with the reported experimental and other theoretical results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transconvolution and the virtual positron emission tomograph-A new method for cross calibration in quantitative PET/CT imaging

Purpose: Positron emission tomography (PET)/computed tomography (CT) measurements on small lesions are impaired by the partial volume effect, which is intrinsically tied to the point spread function of the actual imaging system, including the reconstruction algorithms. The variability resulting from different point spread functions hinders the assessment of quantitative measurements in clinical routine and especially degrades comparability within multicenter trials. To improve quantitative comparability there is a need for methods to match different PET/CT systems through elimination of this systemic variability. Consequently, a new method was developed and tested that transforms the image of an object as produced by one tomograph to another image of the same object as it would have been seen by a different tomograph. The proposed new method, termed Transconvolution, compensates for differing imaging properties of different tomographs and particularly aims at quantitative comparability of PET/CT in the context of multicenter trials. Methods: To solve the problem of image normalization, the theory of Transconvolution was mathematically established together with new methods to handle point spread functions of different PET/CT systems. Knowing the point spread functions of two different imaging systems allows determining a Transconvolution function to convert one image into the other. This function is calculated by convolving one point spread function with the inverse of the other point spread function which, when adhering to certain boundary conditions such as the use of linear acquisition and image reconstruction methods, is a numerically accessible operation. For reliable measurement of such point spread functions characterizing different PET/CT systems, a dedicated solid-state phantom incorporating {sup 68}Ge/{sup 68}Ga filled spheres was developed. To iteratively determine and represent such point spread functions, exponential density functions in combination with a Gaussian distribution were introduced. Furthermore, simulation of a virtual PET system provided a standard imaging system with clearly defined properties to which the real PET systems were to be matched. A Hann window served as the modulation transfer function for the virtual PET. The Hann's apodization properties suppressed high spatial frequencies above a certain critical frequency, thereby fulfilling the above-mentioned boundary conditions. The determined point spread functions were subsequently used by the novel Transconvolution algorithm to match different PET/CT systems onto the virtual PET system. Finally, the theoretically elaborated Transconvolution method was validated transforming phantom images acquired on two different PET systems to nearly identical data sets, as they would be imaged by the virtual PET system. Results: The proposed Transconvolution method matched different PET/CT-systems for an improved and reproducible determination of a normalized activity concentration. The highest difference in measured activity concentration between the two different PET systems of 18.2% was found in spheres of 2 ml volume. Transconvolution reduced this difference down to 1.6%. In addition to reestablishing comparability the new method with its parameterization of point spread functions allowed a full characterization of imaging properties of the examined tomographs. Conclusions: By matching different tomographs to a virtual standardized imaging system, Transconvolution opens a new comprehensive method for cross calibration in quantitative PET imaging. The use of a virtual PET system restores comparability between data sets from different PET systems by exerting a common, reproducible, and defined partial volume effect.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Hot-electron generation by “cavitating” Langmuir turbulence in the nonlinear stage of the two-plasmon–decay instability

The kinetic reduced-description particle-in-cell simulation technique has been applied to study the nonlinear stage of two-plasmon–decay (TPD) instability in an inhomogeneous plasma driven by crossed laser beams. The TPD instability is found to be a prolific generator of “cavitating” Langmuir turbulence. Langmuir “cavitons”—localized longitudinal electric fields, oscillating near the local electron plasma frequency, trapped in ponderomotive density depressions—collapse to dimensions of a few electron Debye lengths, where the electric field energy is collisionlessly transferred to electron kinetic energy. The resulting hot electrons can attain instantaneous temperatures up to 100 keV with net suprathermal heat flux out of the system of up to a few percent of the input laser energy. Scaling laws for this hot-electron generation by TPD, in regimes motivated by recent experiments on the Omega laser, were presented recently by Vu et al. (H. X. Vu, D. F. DuBois, D. A. Russell, and J. F. Myatt, Phys. Plasmas 19, 102703 (2012)). This paper concentrates on the microscopic mechanisms for hot-electron generation. The spatial distribution of the maxima of the electric field envelope modulus is found to be very spiky, with the distribution of electric field envelope maxima obeying Gaussian statistics. The cavitons are produced in density-depletion trenches produced by the combined ponderomotive interference of the crossed laser beams and the ponderomotive beats of the primary backward-going TPD Langmuir waves (LWs) resulting from the crossed beams. The Langmuir turbulence is strongest in the electron-density region near 0.241× the laser's critical density, where the forward LWs from the crossed-beam TPD are degenerate. Nucleation of cavitons is assisted by the modulation of the electron density in the trenches, which in turn is caused by the beating of the common forward-going LW and the pair of backward-going LWs. The autocorrelation function of the LW envelope field provides a near-universal shape for intense cavitons—in the neighborhood of the local field maxima. The hot-electron temperature is found to be approximately a linear function of the “caviton temperature” determined from the Gaussian distribution of caviton maxima. These diagnostics provide strong evidence for the importance of Langmuir caviton collapse in the generation of hot electrons by TPD. Extended Zakharov model predictions for TPD exhibit the same qualitative phenomena.

Vu, H. X.↗

F TURNOFF DISTRIBUTION IN THE GALACTIC HALO USING GLOBULAR CLUSTERS AS PROXIES

F turnoff stars are important tools for studying Galactic halo substructure because they are plentiful, luminous, and can be easily selected by their photometric colors from large surveys such as the Sloan Digital Sky Survey (SDSS). We describe the absolute magnitude distribution of color-selected F turnoff stars, as measured from SDSS data, for 11 globular clusters in the Milky Way halo. We find that the M{sub g} distribution of turnoff stars is intrinsically the same for all clusters studied, and is well fit by two half-Gaussian functions, centered at {mu} = 4.18, with a bright-side {sigma} = 0.36, and with a faint-side {sigma} = 0.76. However, the color errors and detection efficiencies cause the observed {sigma} of the faint-side Gaussian to change with magnitude due to contamination from redder main-sequence stars (40% at 21st magnitude). We present a function that will correct for this magnitude-dependent change in selected stellar populations, when calculating stellar density from color-selected turnoff stars. We also present a consistent set of distances, ages, and metallicities for 11 clusters in the SDSS Data Release 7. We calculate a linear correction function to Padova isochrones so that they are consistent with SDSS globular cluster data from previous papers. We show that our cluster population falls along the Milky Way age-metallicity relationship (AMR), and further find that isochrones for stellar populations on the AMR have very similar turnoffs; increasing metallicity and decreasing age conspire to produce similar turnoff magnitudes and colors for all old clusters that lie on the AMR.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-E-T-121: Dosimetric Characterization of Gafchromic Film EBT3 Using Vidar DosimetryPro Advantage RED and EPSON Expression 10000XL Scanners

Purpose: The purpose of this paper is to characterize EBT3 using two types of scanner, analyzing the factors of influence of each dosimetry system. Methods: The film used in this study was GAFCHROMIC EBT3, the films were exposed at a dose range between 0Gy a 9Gy in a solid water phantom, SSD=100cm, 5cm depth and perpendicularly to the 6MV photon beam generated by a Novalis TX linear accelerator equipped with an HDMLC. A Farmer type ion chamber TN30013 (PTW) was used to determine the dose delivered to the film. The films were digitized with a scanner EPSON expression 10000XL and the VIDAR DosimetryPro Adventage RED. Software RIT113v6.1 was used for construction of the calibration curve and analysis. The film characteristics investigated were: response at different dose levels, sensitivity to orientation and side and resolution through the results of the spatial response function by analyzing a step pattern. Additionally, 20 IMRT treatment fields were measured with both scanner and compared with calculated dose using gamma index analysis (3%-3mm). Results: The OD obtained for dose level 2Gy in the orientation portrait of the film on the scanner EPSON is (0,222±0,19) and for Vidar RED (0,252±0,10) and landscape is for EPSON (0,211±0,25) and for Vidar RED (0,250±0,11) . The orientation dependence with respect to film side is about 0,09% for EPSON and about 0.03% for VIDAR. The spatial response function increase in response to the Gaussian function FWHM EPSON scanner (0.18mm) compared with VIDAR scanner function (less than 0.06mm) was observed. We analyzed 20 total plan dose distributions the number of pixels with gamma>1 (3%-3mm) was 0.7%±1.2 [0.1%; 2.82%] for EBT3-VIDAR y 2%±2.9 [0.2%; 3.5%] for EBT3-EPSON. Conclusion: VIDAR scanner shows better sensitivity. EBT3 film shows a different response between portrait and landscape orientation. Step pattern is better reproduce by VIDAR scanner.

07 ISOTOPE AND RADIATION SOURCES↗

Propagation characteristics of dark and antidark Gaussian beams in turbulent atmosphere

In this work, we investigated theoretically the propagation characteristics of dark and antidark Gaussian beams (DADGBs) in turbulent atmosphere. Based on the Huygens–Fresnel diffraction integral and by mean of the expansion form of a hard aperture function into a finite sum of Gaussian functions we derived analytically the on-axis intensity distribution of an apertured DADGB propagating in turbulent atmosphere. The dependence of the axial intensity distribution on the turbulent strength and on the parameters of the beam is illustrated with numerical examples. The results show that the axial intensity decreases rapidly when the turbulent strength parameter is large, and the propagation distance is shorter for large wavelengths and for small beam waist width.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A metallography and x-ray tomography study of spall damage in ultrapure Al

We characterize spall damage in shock-recovered ultrapure Al with metallography and x-ray tomography. The measured damage profiles in ultrapure Al induced by planar impact at different shock strengths, can be described with a Gaussian function, and showed dependence on shock strengths. Optical metallography is reasonably accurate for damage profile measurements, and agrees within 10–25% with x-ray tomography. Full tomography analysis showed that void size distributions followed a power law with an exponent of γ = 1.5 ± 2.0, which is likely due to void nucleation and growth, and the exponent is considerably smaller than the predictions from percolation models.

36 MATERIALS SCIENCE↗

Study of the Vertical Magnetic Field in Face-on Galaxies Using Faraday Tomography

Faraday tomography allows astronomers to probe the distribution of the magnetic field along the line of sight (LOS), but that can be achieved only after the Faraday spectrum is interpreted. However, the interpretation is not straightforward, mainly because the Faraday spectrum is complicated due to a turbulent magnetic field; it ruins the one-to-one relation between the Faraday depth and the physical depth, and appears as many small-scale features in the Faraday spectrum. In this paper, by employing “simple toy models” for the magnetic field, we describe numerically as well as analytically the characteristic properties of the Faraday spectrum. We show that the Faraday spectrum along “multiple LOSs” can be used to extract the global properties of the magnetic field. Specifically, considering face-on spiral galaxies and modeling turbulent magnetic field as a random field with a single coherence length, we numerically calculate the Faraday spectrum along a number of LOSs and its shape-characterizing parameters, that is, the moments. When multiple LOSs cover a region of ≳(10 coherence length){sup 2}, the shape of the Faraday spectrum becomes smooth and the shape-characterizing parameters are well specified. With the Faraday spectrum constructed as a sum of Gaussian functions with different means and variances, we analytically show that the parameters are expressed in terms of the regular and turbulent components of the LOS magnetic field and the coherence length. We also consider the turbulent magnetic field modeled with a power-law spectrum, and study how the magnetic field is revealed in the Faraday spectrum. Our work suggests a way to obtain information on the magnetic field from a Faraday tomography study.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurement of an inverse Compton scattering source local spectrum using k-edge filters

X-ray sources based on the inverse Compton scattering process are attracting a growing interest among scientists, due to their extremely fast pulse, quasi-monochromatic spectrum, and relatively high intensity. The energy spectrum of the x-ray beam produced by inverse Compton scattering sources in a fixed observation direction is a quasi-monochromatic approximately Gaussian distribution. The mean value of this distribution varies with the scattering polar angle between the electron beam direction and the x-ray beam observation direction. Previous works reported experimental measurements of the mean energy as a function of the polar angle. This work introduces a method for the measurement of the whole local energy spectrum (i.e., the spectrum in a fixed observation direction) of the x-ray beam yielded by inverse Compton scattering sources, based on a k-edge filtering technique.

07 ISOTOPE AND RADIATION SOURCES↗