SEARCH · Engineering Papers

Results for “Fluid flow regimes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1996

Computation of Thermally Perfect Properties of Oblique Shock Waves

A set of compressible flow relations describing flow properties across oblique shock waves, derived for a thermally perfect, calorically imperfect gas, is applied within the existing thermally perfect gas (TPG) computer code. The relations are based upon a value of cp expressed as a polynomial function of temperature. The updated code produces tables of compressible flow properties of oblique shock waves, as well as the original properties of normal shock waves and basic isentropic flow, in a format similar to the tables for normal shock waves found in NACA Rep. 1135. The code results are validated in both the calorically perfect and the calorically imperfect, thermally perfect temperature regimes through comparisons with the theoretical methods of NACA Rep. 1135, and with a state-of-the-art computational fluid dynamics code. The advantages of the TPG code for oblique shock wave calculations, as well as for the properties of isentropic flow and normal shock waves, are its ease of use, and its applicability to any type of gas (monatomic, diatomic, triatomic, polyatomic, or any specified mixture thereof).

Tatum, Kenneth E.↗

DOE OSTI2020

Continuous-Flow Centrifugal Solid/Liquid Separation for the Recovery of Rare-Earth Elements Containing Particles from Phosphoric Acid Sludge

Phosphoric acid sludge contains acid (~54% P 2 O 5 ) and solid precipitates including rare earth elements (REEs) at concentrations of ~2200 ppm. Low-cost recovery of valuable P 2 O 5 and simultaneous solid separation could be an economically feasible approach to recovering REEs while increasing the production of phosphoric acid. The sludge, however, is a complicated stream that cannot be separated by traditional technologies because of high viscosity and a large solid content (30–40%). Guided by a force balance model, an efficient solid/liquid separation method is demonstrated, using a continuous-flow centrifugal contactor. Additionally, the shear regime is bypassed by introducing the sludge directly into the rotor where a centrifugal force is exerted on the fluid, inducing phase separation. Solid particles are trapped in the contactor. High liquid recovery is demonstrated and the effects of process parameters on solid capture are investigated. Three contactors in series yield 94% recovery of solids containing 1500–2895 ppm of REEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Power Generation Cycle with RELAP-7

Balance of plant of a High-Temperature gas-cooled Reactor – Pebble bed Module (HTR-PM) is modeled using RELAP-7. The model includes the primary helium loop where the heat produced by the core is transferred to a helical-coil steam generator and the secondary loop where super-heated steam is fed to a turbine to extract power. The steam is then condensed to subcooled water and pumped back into the steam generator. Results demonstrate that RELAP-7 has the capability to model different regimes encountered in two-phase flow with wall boiling, superheated steam, subcooled liquid and condensation. RELAP-7 also has the capability of modeling different fluids with their own specific models in a very flexible way, without any code change. This also demonstrates the capability of modeling the transfer of fission power into electrical power.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS1985

Double-diffusive convection with sidewalls

Stommel et al. (1956) have first described an instability, known as thermosolutal convection, thermohaline convection, or double-diffusive convection. This instability may occur in the case of a fluid in a gravitational field with two diffusing components present. The present study is concerned with the effect of sidewalls on flow in the fingering regime in the absence of applied horizontal gradients. The work was motivated by numerical results obtained on the basis of a simulation of thermosolutal convection occurring during the unidirectional solidification of a binary alloy. In this case, the unperturbed solute field in the liquid ahead of the solidifying planar interface has an exponential vertical profile because of the rejection or preferential incorporation of solute by the solid phase.

Mcfadden, G. B.↗

NASA NTRS2001

Mixing Dynamics Induced by Traveling Magnetic Fields

Microstructural and compositional homogeneity in metals and alloys can only be achieved if the initial melt is homogeneous prior to the onset of solidification processing. Naturally induced convection may initially facilitate this requirement but upon the onset of solidification significant compositional variations generally arise leading to undesired segregation. Application of alternating magnetic fields to promote a uniform bulk liquid concentration during solidification processing has been suggested. To investigate such possibilities an initial study of using traveling magnetic fields (TMF) to promote melt homogenization is reported in this work. Theoretically, the effect of TMF-induced convection on mixing phenomena is studied in the laminar regime of flow. Experimentally, with and without applied fields, both 1) mixing dynamics by optically monitoring the spreading of an initially localized dye in transparent fluids and, 2) compositional variations in metal alloys have been investigated.

Grugel, Richard N.↗

DOE OSTI2024

Effect of parallel flow on resonant layer responses in high beta plasmas

Abstract Resonant layers in a tokamak respond to non-axisymmetric magnetic perturbations by amplifying the mode amplitude and balancing the plasma rotation through magnetic reconnection and force balance, respectively. This resonant response can be characterized by local layer parameters and especially by a single quantity in the linear regime, the so-called inner-layer Δ. The computation of Δ under two-fluid drift-MHD formalism has been progressed by reducing the order of the system in the phase space, where the shielding current is approximated as being only carried by electrons, a posteriori . In this study, we relax the approximation and compute Δ accounted for by the parallel flow associated with the ion shielding current. The posteriori is numerically verified in great agreement with the original SLAYER developed in a previous paper (J.-K. Park 2022 Phys. Plasmas 29 072506). Extending the resonant layer response theory to high β plasmas, our research findings answer two important questions: how the parallel flow influences the resonant layer response and why the parallel flow effect appears in high β plasmas. The complicated plasma compression in high β regime allows the parallel flow response to give rise to the ion shielding current, which not only shifts the zero-crossing condition of the ExB flow but also enhances the field penetration threshold. Technically, the Riccati matrix transformation method is adapted to handle the numerical stiffness due to the increased order of the system. The high fidelity of this numerical method makes use of further extension of the model to higher-order systems to take other physical phenomena into account. This work is envisaged to predict the resonant layer response under high β fusion reactor conditions.

Lee, Yeongsun (ORCID:000000034474416X)↗

DOE OSTI2023

Theory and simulations of linear and nonlinear two-dimensional Rayleigh–Taylor dynamics with variable acceleration

Interfacial Rayleigh–Taylor mixing is crucial to describing important natural and engineering processes, such as exploding supernovae, laser micromachining, hot spots in inertial confinement fusion, and optical telecommunications. These require the characterization of the time dependence of the driving acceleration. We compare our theoretical formulation based on group theory foundations with interface-capturing numerical simulations for linear and nonlinear two-dimensional Rayleigh–Taylor instabilities in a finite-sized domain with time-varying acceleration over broad ranges of Atwood numbers and acceleration exponents. Detailed corroboration between theory and simulations is provided for this foundational case. Both demonstrate the strong interfacial nature of Rayleigh–Taylor instabilities, which suggests that practical flow fields can be reconstructed from the derived fluid potential using the proposed theory. A robust agreement is also obtained for the early and late-time evolution of the amplitudes of the bubble and spike, which demonstrate that the Rayleigh–Taylor flow can transition to the mixing regime even for a single-mode initial perturbation. Corroboration with experiments of high energy density plasmas motivated by studies of supernovae is also achieved. In addition, a long-standing puzzle in Rayleigh–Taylor dynamics on the interplay between the acceleration, the shear, and the interface morphology in the theory and simulations is resolved by accounting for finite viscosity of the fluids. The characterization of Rayleigh–Taylor instabilities as a highly interfacial phenomenon provides valuable insight into its multiscale nature, which enhances the design and understanding of numerous processes of practical interest.

42 ENGINEERING↗

DOE OSTI2025

Effects beyond ideal MHD on stability of wide and enhanced pedestal regimes in NSTX

Stability of edge-localized modes (ELMs) in spherical tokamaks is explored using the extended MHD model. Linear NIMROD simulations have been performed for three NSTX discharges 132543, 132588, and 141133, to investigate the role of resistivity, diffusivity, and shear flows on the onset of ELMs. The first discharge represents the wide pedestal regime and the later two discharges represent ELM-free enhanced pedestal H-mode. We first present the effect of toroidal rotation shear and find a flow shear destabilizing effect in these NSTX discharges. Simulations are also extended to include the two-fluid and ion gyroviscosity effects. Simulations show that the flow shear can shift the mode spectrum and alter the critical condition of ELM onset. We also uncover that ELM onset prediction in spherical tokamaks requires effects beyond MHD, in particular gyroviscosity and diamagnetic terms could stabilize Peeling-Ballooning modes consistent with the experimental observation of ELM-free regimes in NSTX. The findings give new insight into the nature of the interplay between resistivity, flows, and diamagnetic stabilization in ELM suppression and have potential applications to ELM control schemes in NSTX-U and next-generation spherical tokamaks. This study identifies the essential physical effects that must be included in future predictive and validation simulations.

NSTX↗

DOE OSTI2025

Insight into pseudo-film-boiling in supercritical water under simplified interfacial conditions

The focus of this paper is the physics of supercritical water film boiling through the simulation of natural convection of supercritical water in a rectangular cavity. It has been widely believed that above a fluid's critical point, only one phase exists. However, recent research has indicated the existence of distinct gas-like and liquid-like regions separated by the Widom line, which is the locus of the maxima of the specific heat. Along the Widom line, density decreases sixfold, viscosity drops by a factor of two, while specific heat spikes by an order of magnitude. These variations, specifically in density and viscosity, produce a thick pseudo-interface and flow dynamics behavior akin to film-boiling, denoted here as pseudo-two-phase flow dynamics. When the cavity is heated from the bottom, a pseudo-film of gas-like fluid is formed at the heated wall, and the flow complexity evolves, characterized by the formation of multiple vortices. Results demonstrate the ability of modern conjugate heat transfer computational fluid dynamics to capture the pseudo two-phase regime, with the formation of a pseudo-film at the heated wall. Further, the boiling curve is studied, showing an increase in heat flux with an increase in the temperature differential between the wall and the pseudo-critical temperature. Furthermore, results also show a previously uncharacterized instability, where the convection cells in the cavity oscillate and can flip directions under certain conditions.

Computational fluid dynamics↗

DOE OSTI2020

Finite element simulations of 3D planar hydraulic fracture propagation using a coupled hydro-mechanical interface element

Not provided.

Engineering↗

DOE OSTI2026

Glovebox CFD Analysis: Low-Flow, Laminar CFD Analysis of Glovebox Ventilation and Humidity Transport in Ansys Fluent 2025 R1

There are gloveboxes that frequently exceed the 30% relative humidity level required for operations. These exceedances result in alternative operations needing to be utilized. This report documents a computational fluid dynamics (CFD) analysis performed to characterize airflow and humidity transport within a representative glovebox under nominal, low-flow conditions. The analysis focuses on establishing the flow regime, identifying transport-limited regions, and evaluating the implications of laminar flow on humidity removal. A single-phase, laminar flow model with a species transport model was used to represent air and water vapor mixing. Results demonstrate that, at the nominal flow rates, airflow is laminar with weak mixing, which will result in long residence times, tens of minutes long or more, in low-velocity regions. These conclusions suggests that humidity reduction is transport-limited. This analysis provides qualitative insight into airflow structure and humidity transport trends. In addition to characterization of glovebox airflow and humidity transport, results are intended to inform experimental validation and future transient modeling efforts.

42 ENGINEERING↗

NASA NTRS1987

Aerodynamics of 3-dimensional bodies in transitional flow

Potter, J. Leith↗

NASA NTRS1989

Procedure for estimating aerodynamics of three-dimensional bodies in transitional flow

Based on considerations of fluid dynamic simulation appropriate to hypersonic, viscous flow over blunt-nosed lifting bodies, a method was presented earlier for estimating drag coefficients in the transitional-flow regime. The extension of the same method to prediction of lift coefficients is presented in this paper. Correlation of available experimental data by a simulation parameter appropriate for this purpose is the basis of the procedure described. Under low-density, hypersonic flow conditions, the overriding importance of projected and wetted areas, rather than details of body configuration, support this approach for finding aerodynamic forces. The ease of application of the method makes it useful for preliminary studies that involve a wide variety of three-dimensional vehicle configurations or a range of angles of attack of a given vehicle. It is also easy to examine the influence of different assumptions regarding gas/surface interaction parameters.

Potter, J. Leith↗

NASA NTRS2001

Prediction of Business Jet Airloads Using The Overflow Navier-Stokes Code

The objective of this work is to evaluate the application of Navier-Stokes computational fluid dynamics technology, for the purpose of predicting off-design condition airloads on a business jet configuration in the transonic regime. The NASA Navier-Stokes flow solver OVERFLOW with Chimera overset grid capability, availability of several numerical schemes and convergence acceleration techniques was selected for this work. A set of scripts which have been compiled to reduce the time required for the grid generation process are described. Several turbulence models are evaluated in the presence of separated flow regions on the wing. Computed results are compared to available wind tunnel data for two Mach numbers and a range of angles-of-attack. Comparisons of wing surface pressure from numerical simulation and wind tunnel measurements show good agreement up to fairly high angles-of-attack.

Bounajem, Elias↗

NASA NTRS2001

High Pressure, Transport Properties of Fluids: Theory and Data from Levitated Fluid-Drops at Combustion-Relevant Temperatures

The objective of this investigation is to derive a set of consistent mixing rules for calculating diffusivities and thermal diffusion factors over a thermodynamic regime encompassing the subcritical and supercritical ranges. These should serve for modeling purposes, and therefore for accurate simulations of high pressure phenomena such as fluid disintegration, turbulent flows and sprays. A particular consequence of this work will be the determination of effective Lewis numbers for supercritical conditions, thus enabling the examination of the relative importance of heat and mass transfer at supercritical pressures.

Bellan, J.↗

NASA NTRS1995

Aerothermodynamic Facilities And Measurement: Flow Characterization in Shock Tunnels

This presentation will examine the key performance aspects of shock tunnels as they relate to their use as aerothermodynamic flow simulation facilities. Assessment of shock tube reservoir conditions and flow contaminants generated in the shock tube will be presented along with their limiting impact on viable test envelopes, Facility nozzle performance as it pertains to test time assessment and nozzle exit flow quality (survey of pressure, temperature, and species) will be addressed. Also included will be a discussion of free stream flow diagnostics, both intrusive and nonintrusive, for measurement of critical flow properties not directly inferred from surface mounted transducers. The use of computational fluid dynamics for purposes of validating experimental measurements as well as predicting performance in regimes where measurements are not feasible or possible will be discussed. The use of CFD for facility research and design will also be presented.

Cavolowsky, John A.↗

NASA NTRSDate not supplied

Three-Dimensional CFD Simulations in the Film Boiling Regime During Liquid Nitrogen Chilldown Process

The paper presents a three-dimensional CFD simulation for predicting the liquid nitrogen chilldown process through a SS-304 tube. A dispersed mixture model has been employed to predict the two-phase flow behavior whereas the Lee phase change model has been used to predict the boiling process. Cryogenic chilldown process starts with a pure vapor region and proceeds to film, transition and nucleate boiling regimes before reaching the single phase liquid flow and complete chilldown of the transfer line. The present numerical model predicted the film boiling regime accurately and the slope of the chilldown curve deviates slightly from the experimental curve towards the transition and nucleate boiling regime, which needs further investigation. The contours of liquid volume fraction and temperature profiles has been presented to understand the inverted annular film flows in the film boiling regime in detail. In future, the present CFD model will be extended to a wide range of chilldown conditions and different cryogenic fluids to develop a robust methodology.

CFD↗

DOE OSTI2026

Geostrophic to magnetically-damped turbulence in liquid metal rotating magnetoconvection

Understanding planetary core convection dynamics requires the study of convective flows in which the Coriolis and Lorentz forces attain a leading-order, so-called magnetostrophic balance. Experimental investigations of rotating magnetoconvection (RMC) in the magnetostrophic regime are therefore essential to broadly characterize the properties of local-scale planetary core flow. Toward this end, we present here the first thermovelocimetric measurements of magnetostrophic, liquid metal convection, which are made using liquid gallium as the working fluid, at moderate rotation rates (Ekman numbers 10 -4 ≤ Ek ≤ 10 -5 ) and in the presence of dynamically strong magnetic fields (Elsasser number Λ = 1). Complementary rotating convection (RC) experiments are performed at the same rotation rates to serve as reference cases. Our RMC velocity measurements adequately follow a geostrophic turbulent scaling for cases in which local-scale convective inertial forces exceed the Lorentz forces in the fluid bulk. In cases where Lorentz forces exceed local-scale inertia (local or convective interaction parameter N ℓ or N C ≳ 3), the root-mean-square RMC velocities are magnetically damped, yielding values below the geostrophic turbulent RC scaling prediction. An enhancement in heat transfer is observed, which we attribute to the increased coherence of vertically aligned magnetostrophic convective flow. Finally, our results and comparisons to dynamo simulations suggest that the system is in the strong-field regime, where convection-scale flows are magnetically damped with N C ≳ 3).

Convective turbulence↗