Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flow Improvers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Improved visualization of flow field measurements

A capability is proposed that makes it feasible to apply to measured flow field data the visualization tools developed to display numerical solutions for computational fluid dynamic problems. The measurement monitor surface (MMS) methodology was used for the analysis of flow field measurements within a low-aspect-ratio transonic axial-flow fan rotor acquired with two-dimensional laser anemometry. It is shown that the MMS method may be utilized to generate input for the multidimensional processing and analytical tools developed for numerical flow field simulation data. Thus an experimenter utilizing an interactive graphics program could illustrate scalar quantities such as Mach number by profiles, contour lines, carpet plots, and surfaces employing various color intensities. Also, flow directionality can be shown by the display of vector fields and particle traces.

Miles, Jeffrey Hilton↗
NASA NTRS1928

On improvement of air flow in wind tunnels

The most important aerodynamical qualities that should be aimed at in wind tunnel design, are as follows: 1) constant and parallel direction of flow; 2) uniform velocity across all sections; 3) absence of turbulent motion; 4) constant velocity of flow. The above-mentioned qualities are all realized in a high degree in the Gottingen type of wind tunnel, with a parallel portion before the working section, the cross section of which is steadily reduced. It is shown in what follows, that the system can be applied to other wind tunnels, such as the N.P.L. or Eiffel type.

JOURNAL↗
NASA NTRS1993

Improved in-flow acoustic sensor

An acoustic sensor for measuring acoustic waves contained in fluid flowing over the sensor is described. The acoustic sensor reduces any unwanted self-noise associated with the flowing fluid by providing a nose cone having proper aerodynamic properties and by positioning the diaphragm of a microphone of the sensor at a location where any unwanted noise is at a relatively low level. The nose cone has a rounded, blunt or even sharp tip, neither of which creates any major disturbances in the flowing fluid which it intercepts.

Allen, Christopher S.↗
NASA NTRS1995

Development and application of a 3D Cartesian grid Euler method

This report describes recent progress in the development and application of 3D Cartesian grid generation and Euler flow solution techniques. Improvements to flow field grid generation algorithms, geometry representations, and geometry refinement criteria are presented, including details of a procedure for correctly identifying and resolving extremely thin surface features. An initial implementation of automatic flow field refinement is also presented. Results for several 3D multi-component configurations are provided and discussed.

Melton, John E.↗
NASA NTRS2000

Modernization and Activation of the NASA Ames 11- by 11-Foot Transonic Wind Tunnel

The Unitary Plan Wind Tunnel (UPWT) was modernized to improve performance, capability, productivity, and reliability. Automation systems were installed in all three UPWT tunnel legs and the Auxiliaries facility. Major improvements were made to the four control rooms, model support systems, main drive motors, and main drive speed control. Pressure vessel repairs and refurbishment to the electrical distribution system were also completed. Significant changes were made to improve test section flow quality in the 11-by 11-Foot Transonic leg. After the completion of the construction phase of the project, acceptance and checkout testing was performed to demonstrate the capabilities of the modernized facility. A pneumatic test of the tunnel circuit was performed to verify the structural integrity of the pressure vessel before wind-on operations. Test section turbulence, flow angularity, and acoustic parameters were measured throughout the tunnel envelope to determine the effects of the tunnel flow quality improvements. The new control system processes were thoroughly checked during wind-off and wind-on operations. Manual subsystem modes and automated supervisory modes of tunnel operation were validated. The aerodynamic and structural performance of both the new composite compressor rotor blades and the old aluminum rotor blades was measured. The entire subsonic and supersonic envelope of the 11-by 11-Foot Transonic leg was defined up to the maximum total pressure.

Kmak, Frank J.↗
NASA NTRSDate not supplied

On Generalizably Improving RANS Predictions of Flow Separation and Reattachment

This work presents progress in an ongoing data-driven turbulence modeling effort at NASA Langley Research Center to improve predictions for separated flows. Two augmentation strategies are presented – one to improve predictions for the point of reattachment after smooth-body separation, and another to improve predictions for flow separation due to prolonged adverse pressure gradients. The reattachment augmentation was inspired from lessons learned during attempts at using field inversion and machine learning (FIML); however, it is prescribed as a conventional analytic closed-form expression. Results show that, when introduced into the SST k-w model, it shortens the otherwise overpredicted separation bubble length for three cases characterized by different Reynolds numbers and flow geometries. The second augmentation, which addresses flow separation under prolonged adverse pressure gradients, is inferred via FIML and applied as a neural network within the Spalart-Allmaras model. It uses features that are chosen such that the presented results show an improved predictive accuracy for the training case without affecting other cases where the augmentation is not needed. Further testing is required to establish the generalizability of this augmentation. The rationale behind the chosen features that serve as inputs to both these augmentations is also presented for the benefit of the reader.

machine learning↗
NASA NTRS1994

Liquid/Gas Flow Mixers

Improved devices mix gases and liquids into bubbly or foamy flows. Generates flowing, homogeneous foams or homogeneous dispersions of small, noncoalescing bubbles entrained in flowing liquids. Mixers useful in liquid-metal magnetohydrodynamic electric-power generator, froth flotation in mining industry, wastewater treatment, aerobic digestion, and stripping hydrocarbon contaminants from ground water.

Fabris, Gracio↗
NASA NTRS2000

Accuracy of Numerical Simulations of Tip Clearance Flow in Transonic Compressor Rotors Improved Dramatically

The tip clearance flows of transonic compressor rotors have a significant impact on rotor and stage performance. Although numerical simulations of these flows are quite sophisticated, they are seldom verified through rigorous comparisons of numerical and measured data because, in high-speed machines, measurements acquired in sufficient detail to be useful are rare. Researchers at the NASA Glenn Research Center at Lewis Field compared measured tip clearance flow details (e.g., trajectory and radial extent) of the NASA Rotor 35 with results obtained from a numerical simulation. Previous investigations had focused on capturing the detailed development of the jetlike flow leaking through the clearance gap between the rotating blade tip and the stationary compressor shroud. However, we discovered that the simulation accuracy depends primarily on capturing the detailed development of a wall-bounded shear layer formed by the relative motion between the leakage jet and the shroud.

VanZante, Dale E.↗
DOE OSTI2019

Flowing electrolyte fuel cell with improved performance and stability

A flowing electrolyte fuel cell system design (DHCFC-Flow) is provided. The use of a flowing oxygen-saturated electrolyte in a fuel cell offers a significant enhancement in the cell performance characteristics. The mass transfer and reaction kinetics of the superoxide/peroxide/oxide ion (mobile oxygen ion species) in the fuel cell are enhanced by recirculating an oxidizing gas-saturated electrolyte. Recirculating oxygen-saturated electrolyte through a liquid channel enhances the maximal current observed in a fuel cell. The use of a oxygen saturated electrolyte ensures that the reaction kinetics of the oxygen reduction reaction are fast and the use of convection ameliorates concentration gradients and the diffusion-limited maximum current density. The superoxide ion is generated in situ by the reduction of the oxygen dissolved in the gaseous electrolyte. Also, a dual porosity membrane allows the uniform flow of fuel (e.g., methane) on the fuel side, without allowing phase mixing. The capillary pressure for liquid intrusion into the gas phase and vice versa is quite large, estimated to be 1-10 psi. This makes it easier to control the fluctuations in gas/liquid velocity which might otherwise lead to phase mixing and the loss of fuel cell performance. In one variation, a dual-porosity membrane structure is incorporated in the system to allow uniform flow of fuel and prevent mixing of fuel with a liquid electrolyte.

Desai, Divyaraj↗
DOE OSTI2017

Numerical convergence improvements for porflow unsaturated flow simulations

Section 3.6 of SRNL (2016) discusses various PORFLOW code improvements to increase modeling efficiency, in preparation for the next E-Area Performance Assessment (WSRC 2008) revision. This memorandum documents interaction with Analytic & Computational Research, Inc. (http://www.acricfd.com/default.htm) to improve numerical convergence efficiency using PORFLOW version 6.42 for unsaturated flow simulations.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1975

Numerical study of sound propagation in a jet flow

An improved computer oriented solution method for problems involving the propagation of sound through a nonuniform jet flow is developed. The method seeks to optimize the use of computer resources such as core storage space and central memory time. Complete formulation details are presented for a jet flow model consisting of a fixed point source on the jet center line in the potential core.

Padula, S. L.↗
NASA NTRS1995

Wing-section optimization for supersonic viscous flow

To improve the shape of a supersonic wing, an automated method that also includes higher fidelity to the flow physics is desirable. With this impetus, an aerodynamic optimization methodology incorporating thin-layer Navier-Stokes equations and sensitivity analysis had been previously developed. Prior to embarking upon the wind design task, the present investigation concentrated on testing the feasibility of the methodology, and the identification of adequate problem formulations, by defining two-dimensional, cost-effective test cases. Starting with two distinctly different initial airfoils, two independent shape optimizations resulted in shapes with similar features: slightly cambered, parabolic profiles with sharp leading- and trailing-edges. Secondly, the normal section to the subsonic portion of the leading edge, which had a high normal angle-of-attack, was considered. The optimization resulted in a shape with twist and camber which eliminated the adverse pressure gradient, hence, exploiting the leading-edge thrust. The wing section shapes obtained in all the test cases had the features predicted by previous studies. Therefore, it was concluded that the flowfield analyses and sensitivity coefficients were computed and fed to the present gradient-based optimizer correctly. Also, as a result of the present two-dimensional study, suggestions were made for the problem formulations which should contribute to an effective wing shape optimization.

Item, Cem C.↗
NASA NTRS1991

Point-Diffraction Interferometer For Flow Experiments

Improved point-diffraction interferometer used in both real-time visualization and recording of supersonic and transonic flow fields about airfoils and other test bodies in wind tunnels. System relatively insensitive to vibrations, but very sensitive to optical quality of wind-tunnel windows. Designed to handle higher laser powers and to use available light efficiently.

Bachalo, William D.↗
NASA NTRS2015

Convective Enhancement of Icing Roughness Elements in Stagnation Region Flows

To improve existing ice accretion simulation codes, more data regarding ice roughness and its effects on convective heat transfer are required. To build on existing research on this topic, this study used the Vertical Icing Studies Tunnel (VIST) at NASA Glenn Research to model realistic ice roughness in the stagnation region of a NACA 0012 airfoil. Using the VIST, a test plate representing the leading 2% chord of the airfoil was subjected to flows of 7.62 m/s (25 ft/s), 12.19 m/s (40 ft/s), and 16.76 m/s (55 ft/s). The test plate was fitted with 3 surfaces, each with a different representation of ice roughness: 1) a control surface with no ice roughness, 2) a surface with ice roughness with element height scaled by 10x and streamwise rough zone width from the stagnation point scaled by 10x, and 3) a surface with ice roughness with element height scaled by 10x and streamwise rough zone width from the stagnation point scaled by 25x. Temperature data from the tests were recorded using an infrared camera and thermocouples imbedded in the test plate. From the temperature data, a convective heat transfer coefficient map was created for each case. Additional testing was also performed to validate the VIST's flow quality. These tests included five-hole probe and hot-wire probe velocity traces to provide flow visualization and to study boundary layer formation on the various test surfaces. The knowledge gained during the experiments will help improve ice accretion codes by providing heat transfer coefficient validation data and by providing flow visualization data helping understand current and future experiments performed in the VIST.

Icing↗
NASA NTRS2007

Temperature-Corrected Model of Turbulence in Hot Jet Flows

An improved correction has been developed to increase the accuracy with which certain formulations of computational fluid dynamics predict mixing in shear layers of hot jet flows. The CFD formulations in question are those derived from the Reynolds-averaged Navier-Stokes equations closed by means of a two-equation model of turbulence, known as the k-epsilon model, wherein effects of turbulence are summarized by means of an eddy viscosity. The need for a correction arises because it is well known among specialists in CFD that two-equation turbulence models, which were developed and calibrated for room-temperature, low Mach-number, plane-mixing-layer flows, underpredict mixing in shear layers of hot jet flows. The present correction represents an attempt to account for increased mixing that takes place in jet flows characterized by high gradients of total temperature. This correction also incorporates a commonly accepted, previously developed correction for the effect of compressibility on mixing.

Abdol-Hamid, Khaled S.↗
NASA NTRS1972

Comparison of remote sensors for soil moisture and other hydrologic studies

Progress in lake temperature and soil moisture remote sensing during 1971. The use of satellite data and imagery for improved flood and low flow forecasts, improved water level and ice reports for the Great Lakes, and better and faster coastal zone storm damage assessment is considered.

Wiesnet, D. R.↗
NASA NTRS1979

Effect of casing treatment on performance of a two-stage high-pressure-ratio fan

A two-stage fan, previously tested with a solid casing, was tested with a casing with circumferential grooves over the tips of both rotors (casing treatment). Tests were conducted at 80 and 100 percent of design speed with uniform flow. The casing treatment improved the flow range and stall margin significantly without changing the characteristics overall performance curves of total-pressure and efficiency as functions of weight flow, other than extending them to lower weight flows.

Urasek, D. C.↗