Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Field regulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Independent Review of Groundwater Remediation Strategy for Hexavalent Chromium and RDX Groundwater Plumes at Los Alamos National Laboratory (Rev. 1)

Site operations at the Los Alamos National Laboratory (LANL) resulted in the release of oxidized chromium, Cr(VI), into Sandia Canyon from cooling tower effluent from 1956 until 1972. The chromium traveled with the surface water approximately 3 miles downstream before migrating below ground surface. Chromium concentrations exceed 50 μg/L in the upper portion of the aquifer. Another LANL groundwater plume of concern is associated with RDX (Royal Demolition Explosives, 1,3,5-trinitro-1,3,5-triazine). Between 1951 and 1996, RDX was released to the mesa-top facilities' process water outfall, adjacent and underlying soils, and alluvial sediments, along with surface water in Cañon de Valle. Between 2000 and 2010, two remedial actions were deployed, removing much of the near-surface RDX, however, recharge due to precipitation has transported RDX into the perched-intermediate zone and into the regional aquifer. The report documents an independent technical review by scientists from the Department of Energy (DOE) Network of National Laboratories for Environmental Management and Stewardship (NNLEMS) to provide recommendations for potential near term actions to address and optimize remediation for both the Cr(VI) and RDX plumes. The proposed near-term remedial actions include design of pump and treat systems for Cr(VI) and monitoring and study for natural attenuation for RDX. The review assesses existing data, conceptual and numerical modeling, and it recommends a technical integration process to support identifying and implementing strategic, effective and efficient remedies. The DOE Environmental Management Los Alamos Field Office (EM-LA) and their cleanup contractor Newport News Nuclear-BWTX, LLC Los Alamos (N3B) provided the information required for the review. Interviews were also conducted with regulators to obtain the full spectrum of technical, regulatory and scientific perspectives. The independent review team was impressed by the capabilities, experiences, innovativeness, and insightfulness of the technical representatives from both the regulator, the New Mexico Environment Department (NMED) and N3B. Incorporation of vadose zone flow pathways in the conceptual site model (CSM) and configuring the numerical modeling for the site was generally state-of-the-practice (or better). This could be considered state-of-the-art by addressing uncertainties related to spatial extent of hydraulic windows. The reviews from the regulators were thorough and often provided useful concepts for consideration and future/study resolutions. The overarching consensus recommendation of independent review team is that the LANL groundwater plumes should be addressed in context of the emerging "management of complex sites" paradigm.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

A multi-scale temperature-based strategy to map hydrologic exchange flows in highly dynamic systems

Mapping and quantifying hydrologic exchange flows (HEFs) is critical to environmental monitoring and remediation at contaminated sites; however, these objectives are challenging in highly dynamic systems, e.g., along dam-regulated rivers, where HEFs vary rapidly. Direct seepage measurements are labor-intensive and difficult to automate, whereas indirect (e.g., thermal) and remote sensing methods have potential to allow continuous monitoring with limited field effort. We present a preliminary assessment of a multi-scale temperature-based strategy for monitoring HEFs along the Hanford Reach of the Columbia River, in eastern WA, United States. Five thermal methods were assessed. First, a vertical temperature profile (VTP) was installed into the streambed. The VTP data were analyzed using a data assimilation algorithm designed for automated real-time estimation in dynamic systems. Second, a thermal infrared (TIR) camera was used in roving surveys to identify seeps. Third, a TIR camera was stationed at the VTP site to collect images at 1-h intervals. Together, the two TIR datasets provided a basis to assess the potential for drone-based TIR. Fourth, temperature was measured at the sediment/water interface to assess fiber-optic distributed temperature sensing. Fifth, imagery from the ECOSTRESS satellite mission was acquired to assess the potential of spaceborne thermal monitoring. Based on our preliminary assessment, VTP, TIR, and bed temperature measurements provide complementary spatial coverage, temporal sampling, and resolution; these methods have potential for long-term, automated monitoring of HEFs. The publicly available spaceborne imagery, however, proved inadequate because of insufficient spatial resolution and data gaps resulting from cloud cover and revisit frequency.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Field evaluation of transgenic hybrid poplars with desirable wood properties and enhanced growth for biofuel production by bicistronic expression of PdGA20ox1 and PtrMYB3 in wood-forming tissue

Background: To create an ideotype woody bioenergy crop with desirable growth and biomass properties, we utilized the viral 2A-meidated bicistronic expression strategy to express both PtrMYB3 ( MYB46 ortholog of Populus trichocarpa , a master regulator of secondary wall biosynthesis) and PdGA20ox1 (a GA20-oxidase from Pinus densiflora that produces gibberellins) in wood-forming tissue (i.e., developing xylem). Results: Transgenic Arabidopsis plants expressing the gene construct DX15::PdGA20ox1-2A-PtrMYB3 showed a significant increase in both stem fresh weight (threefold) and secondary wall thickening (1.27-fold) relative to wild-type (WT) plants. Transgenic poplars harboring the same gene construct grown in a greenhouse for 60 days had a stem fresh weight up to 2.6-fold greater than that of WT plants. In a living modified organism (LMO) field test conducted for 3 months of active growing season, the stem height and diameter growth of the transgenic poplars were 1.7- and 1.6-fold higher than those of WT plants, respectively, with minimal adverse growth defects. Although no significant changes in secondary wall thickening of the stem tissue of the transgenic poplars were observed, cellulose content was increased up to 14.4 wt% compared to WT, resulting in improved saccharification efficiency of the transgenic poplars. Moreover, enhanced woody biomass production by the transgenic poplars was further validated by re-planting in the same LMO field for additional two growing seasons. Conclusions: Taken together, these results show considerably enhanced wood formation of our transgenic poplars, with improved wood quality for biofuel production.

09 BIOMASS FUELS↗
DOE OSTI2025

A Cultural Resource Survey of 110.55 Acres at the Coyote Test Field, Sandia National Laboratories, Kirtland Air Force Base, Bernalillo County, Albuquerque, New Mexico

This report presents the results of a Section 110 cultural resource survey of Sandia National Laboratories’ (Sandia) 9930 and 9939 Complexes, in the Coyote Test Field (CTF), located on lands permitted to the Department of Energy (DOE) by the Department of Defense (DOD), Kirtland Air Force Base (KAFB), Bernalillo County, Albuquerque, New Mexico. The Department of Energy, National Nuclear Security Administration Sandia Field Office (DOE/NNSA SFO) and National Technology and Engineering Solutions of Sandia, LLC, in accordance with Section 110 and Section 106 of the National Historic Preservation Act (NHPA) and its implementing regulations 36 C.F.R. Part 800, states that every federal agency must establish their own historic preservation program for the identification, evaluation, and protection of historic properties and to ensure that historic preservation is fully integrated into the ongoing programs of federal agencies. Sandia’s Cultural Resources Program (CRP) establishes areas of potential effects based upon projected Sandia mission needs. Some of these areas have no immediate undertakings planned but are in areas where undertakings can happen at a future date.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Defect‐Induced, Ferroelectric‐Like Switching and Adjustable Dielectric Tunability in Antiferroelectrics

Abstract Antiferroelectrics, which undergo a field‐induced phase transition to ferroelectric order that manifests as double‐hysteresis polarization switching, exhibit great potential for dielectric, electromechanical, and electrothermal applications. Compared to their ferroelectric cousins, however, considerably fewer efforts have been made to understand and control antiferroelectrics. Here, it is demonstrated that the polarization switching behavior of an antiferroelectric can be strongly influenced and effectively regulated by point defects. In films of the canonical antiferroelectric PbZrO 3 , decreasing oxygen pressure during deposition (and thus increasing adatom kinetic energy) causes unexpected “ferroelectric‐like” polarization switching although the films remain in the expected antiferroelectric orthorhombic phase. This “ferroelectric‐like” switching is correlated with the creation of bombardment‐induced point‐defect complexes which pin the antiferroelectric–ferroelectric phase boundaries, and thus effectively delay the phase transition under changing field. The effective pinning energy is extracted via temperature‐dependent switching‐kinetics studies. In turn, by controlling the concentration of defect complexes, the dielectric tunability of the PbZrO 3 can be adjusted, including being able to convert between “positive” and “negative” tunability near zero field. This work reveals the important role and strong capability of defects to engineer antiferroelectrics for new performance and functionalities.

Pan, Hao↗
DOE OSTI2020

The Evolving U.S. Distribution System: Technologies, Architectures, and Regulations for Realizing a Transactive Energy Marketplace

As pockets of the U.S. experience growing penetrations of distributed energy resources (DERs), the traditional practices underpinning distribution system regulation, operation, and management are evolving. The challenges and opportunities that DERs pose are driving stakeholders across the United States to reconsider regulatory goals, utility business models, ratemaking, and grid architectures. This report reviews the evolution of the U.S. distribution system from the advent of the utility-as-regulated-monopoly business model to the technological and regulatory shifts happening. The report concludes with a discussion of transactive energy systems and summarizes some of the leading RD&D happening in this field.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Transitioning CO2-EOR Field to Dedicated CO2 Storage: Risk Considerations and Quantifications

Presentation slides on “Transitioning CO2-EOR Field to Dedicated CO2 Storage: Risk Considerations and Quantifications” for the CCUS 2025 conference held in Houston, Texas March 3-5, 2025. CO2 injection wells for enhanced oil recovery (EOR) are currently regulated as Class II wells under the U.S. Environmental Protection Agency’s (EPA) Underground Injection Control (UIC) program, while dedicated geological CO2 storage (GCS) wells are considered Class VI wells. The UIC classification of wells for a transitioning CO2-EOR facility has the potential to substantially impact the feasibility of operations. This paper reports a case study of risk assessment of this transition, including areas review, plume stability and pressure transient and its impacts in dedicated CO2 storage.

carbon storage↗
DOE OSTI2022

Small field campaign: aerosol – ice formation closure pilot study. Final Report

Prediction of atmospheric ice formation from aerosol particles by heterogeneous nucleation represents one of the grand challenges in atmospheric science. Our insufficient predictive understanding of primary ice formation is the reason that climate models typically do not include heterogeneous ice nucleation with subsequent effects on climate uncertainty. Mixed-phase clouds, where supercooled water droplets and ice crystals coexist play globally an important role regulating climate. This is especially the case for the Arctic region that experiences the greatest warming due to climate change compared to other regions in the world. Immersion freezing initiated by ice-nucleating particles (INPs) in supercooled water droplets is recognized as the dominant primary ice formation pathway in mixed-phase cloud regimes. For this reason, it is crucial to evaluate our capability to predict immersion freezing for a given ambient aerosol population. The goal of this project is conducting a field-based pilot study at the U.S. DOE Atmospheric Radiation Measurement (ARM) user facility at Southern Great Plains (SGP) to evaluate our capability to predict the number concentration of aerosol particles that serve as INPs in the immersion freezing mode. Successful prediction of INP number concentrations is also termed “closure”. This field-observational approach represents a first-of-its kind attempt of an aerosol–ice formation closure study (AEROICESTUDY). Very few closure studies related to INPs have been conducted, and to our knowledge, none using robust size-resolved ambient aerosol composition measurements as a starting point. Achievement of aerosol–ice formation closure relies on our ability to characterize the ambient aerosol population with respect to particles size and composition and to determine INP number concentrations for specified freezing temperatures. This requires numerous online and offline instrumentation resulting in this pilot field campaign being a multi-institutional and community-collaborative effort. We chose the ARM SGP megasite for this first aerosol-ice formation closure pilot study due to its significant measurement capabilities available to obtain detailed physical characterization of the local aerosol population including size distribution, mass loading, and chemical composition of non-refractory aerosol particles. The overall objective of this project is to identify ice nucleation parameterizations that produce the most robust predictions of INP numbers and thus are best suited to be included in cloud and climate models. This objective includes the following goals for this field and laboratory-based project: i) What are the crucial aerosol physicochemical property measurements needed to accurately guide ice nucleation representations in models and long-term INP measurements? ii) What level of parameter details needs to be known to achieve aerosol–ice formation closure? iii) What are the leading causes for climate model bias in INP predictions? We found that the advances in our understanding of immersion freezing garnered over the last 20 years allowed us to yield partial and full closures of atmospheric immersion freezing from ambient aerosol particles. When the aerosol population is physicochemically complex and parameterizations for representative INP types are not yet available, we still struggle to accurately predict INP number concentrations. This project clearly demonstrates that with more laboratory and field measurements that are accompanied by particle composition analysis, the necessary datasets to achieve aerosol–ice formation closure for various locations will emerge, thus providing a robust foundation for guiding the representation of INPs in cloud and climate models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Regulation of Cathode Mass and Charge Transfer by Structural 3D Engineering for Protonic Ceramic Fuel Cell at 400 °C

Abstract Lowering the operating temperature (ideally below 400 °C) for solid oxide fuel cell (SOFC) technology deployment has been an important transition that introduces the benefit of reduced operational costs and system durability. However, the key technical issue limiting the transition is the sluggish cathodic performance, namely the oxygen reduction reaction (ORR) rate of the conventional sponge‐like cathode dramatically drops as the temperature reduces. In this paper, 3D engineering of a cathode is conducted on a protonic ceramic fuel cell to obtain an enhanced ORR between 400 and 600 °C. Compared with a cell using a conventional sponge‐like cathode, 3D engineering improves the cathode ORR by 41% at 400 °C with a peak power density of 0.410 W cm −2 . A phase field simulation is applied to assist the engineering by understanding the competition between the cathode mass and charge transfer with different cathode porosities. The results show that structural engineering of existing well‐developed cathodes is a simple and effective method to promote cathode ORR for low temperature SOFC by regulating the mass and charge transfer.

Bian, Wenjuan↗
DOE OSTI2022

Motility of acoustically powered micro-swimmers in a liquid crystalline environment

Suspensions of microswimmers in liquid crystals demonstrate remarkably complex dynamics and serve as a model system for studying active nematics. So far, experimental realization of microswimmers suspended in liquid crystalline media has relied on biological microorganisms that impose strict limitations on the compatible media and makes it difficult to regulate activity. Here, we demonstrate that acoustically powered bubble microswimmers can efficiently self-propel in a lyotropic liquid crystal. The velocity of the swimmers is controlled by the amplitude of the acoustic field. Histograms of swimming directions with respect to the local nematic field reveal a bimodal distribution: the swimmers tend to either fully align with or swim perpendicular to the director field of the liquid crystal, occasionally switching between these two states. The bubble-induced streaming from a swimmer locally melts the liquid crystal and produces topological defects at the tail of the swimmer. Further, we show that the defect proliferation rate increases with the angle between the swimmer's velocity and the local orientation of the director field.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Multi-functional Sorbent Technology (MUST) for the Recovery/Removal of Critical/Heavy Metals from Fossil-Related Wastewater

A collection of remediation and recovery technologies like those predicated on photocatalytic-, electric-, chemical-, membrane-, and adsorptive-based processes currently exists in different stages of development or deployment between these methods of water management. Among these technologies, solid sorbent processes embody an optimal balance between cost-effectiveness, environmental friendliness, and technological maturity. The U.S. Department of Energy’s National Energy Technology Laboratory developed a suit of cross-linked, functionalized silica sorbents tailored to eliminate the most toxic metals regulated by the U.S. Environmental Protection Agency (EPA); critical metals identified by the U.S. Geological Survey (USGS); and harmful organics like the infamous perfluoroalkyl and polyfluoroalkyl substances (PFAS). An array of laboratory and field tests proved that the MUST sorbents removed ppb-level lead from drinking water, selenium from FGD wastewater below EPA limits, aqueous dyes and PFAS; and fractionated low ppm-level critical metals (CM) from AMD and simulated produced water. Proof-of-concept for commercial CM recovery was verified through obtaining milligram-quantities of purified Al solids from a sorbent multi-bed AMD field-site test. Commercial efficacy was further supported by achieving purified fractions of adsorbed Mn upon treating both the AMD and synthetic produced water with the laboratory multi-bed test unit.

Wilfong, Walter C.↗
DOE OSTI2021

Large-Eddy Simulations of Marine Boundary Layer Clouds Associated with Cold-Air Outbreaks during the ACTIVATE Campaign. Part I: Case Setup and Sensitivities to Large-Scale Forcings

Large-eddy simulation (LES) is able to capture key boundary layer (BL) turbulence and cloud processes. Yet, large-scale forcing and surface turbulent fluxes of sensible and latent heat are often poorly prescribed for LESs. We derive these quantities from measurements and reanalysis obtained for two cold-air outbreak (CAO) events during Phase I of the Aerosol Cloud Meteorology Interactions over the Western Atlantic Experiment (ACTIVATE) in February–March 2020. We study the two contrasting CAO cases by performing LES and test the sensitivity of BL structure and clouds to large-scale forcings and turbulent heat fluxes. Profiles of atmospheric state and large-scale divergence and surface turbulent heat fluxes obtained from ERA5 data agree reasonably well with those derived from ACTIVATE field measurements for both cases at the sampling time and location. Therefore, we adopt the time-evolving heat fluxes, wind, and advective tendencies profiles from ERA5 data to drive the LES. We find that large-scale thermodynamic advective tendencies and wind relaxations are important for the LES to capture the evolving observed BL meteorological states characterized by the hourly ERA5 data and validated by the observations. We show that the divergence (or vertical velocity) is important in regulating the BL growth driven by surface heat fluxes in LESs. The evolution of liquid water path is largely affected by the evolution of surface heat fluxes. The liquid water path simulated in LES agrees reasonably well with the ACTIVATE measurements. This study paves the path to investigate aerosol–cloud–meteorology interactions using LES informed and evaluated by ACTIVATE field measurements.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Coupling localized Noah-MP-Crop model with the WRF model improved dynamic crop growth simulation across Northeast China

Croplands play a critical role in regulating the energy and moisture exchanges between the land surface and atmosphere. However, the interactions between cropland and climate are usually poorly represented due to a lack of detailed representation in crop types and field management. Here, we coupled the Noah-MP-Crop model with the state-of-the-art Weather Research and Forecasting (WRF) model to explore and evaluate the crop growth dynamics in response to climate variations across Northeast China. The default parameters of the crop model were not exactly suitable for the agricultural ecosystems in Northeast China. The detailed cropland distribution, and crop phenology parameters including growing degree days (GDD) and planting (harvesting) date were first created using multi-source remote sensing products and reanalysis data, and was then successfully used to simulate the growth and yield for corn and soybean and associated energy exchanges. We also optimized and calibrated other crop parameters using the time-series of the Moderate Resolution Imaging Spectroradiometer (MODIS) land surface products. The modified crop model substantially improved the simulation of crop growth, plant physiology, and biomass accumulation for both corn and soybean. Coupling the localized dynamic crop model into the WRF led to considerable decreases in the simulated mean-absolute-errors (MAEs) and biases of the leaf area index, evapotranspiration, and gross primary production compared with the MODIS observed values. Compared with the statistical yield from each province, the modified crop model underestimated the corn yield from 11.1% to 48.6%, whereas overestimated the soybean yield from 16.5% to 162.6%.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

The Role of Topography in Controlling Evapotranspiration Age

Abstract Evapotranspiration (ET) age is a key metric of water sustainability but a major unknown partly due to the extreme difficulty in modeling it. Groundwater is found to be important in ET age variations in small‐scale studies, yet our understanding is insufficient because groundwater systems are nested across scales. Here, we conducted GPU‐accelerated particle tracking with integrated hydrologic modeling to quantify the variations in ET age at a regional scale of ∼0.4 M km 2 . Simulation results reveal topography‐driven flow paths shaping the spatial and temporal patterns of ET age variations. On ridges, where root zone decoupling with deep subsurface storage, ET age is generally young, with seasonal variations dominated by meteorological conditions. In the valley bottom, ET age is generally old, with significant subseasonal variations caused by the convergence of subsurface flow paths. On hillslopes with water table depths ranging from 1 to 10 m, ET age shows strong seasonal variations caused by the connections with lateral groundwater regulated by ET demand. Our modeling approach provides insights into the basic linkages between ET age and topography at large scale. Our work highlights the perspective of multiscale studies of ET age, suggesting new field experiments to test these process connections and to determine if such linkages warrant inclusion in Earth System Models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Warming induces unexpectedly high soil respiration in a wet tropical forest

Abstract Tropical forests are a dominant regulator of the global carbon cycle, exchanging more carbon dioxide with the atmosphere than any other terrestrial biome. Climate models predict unprecedented climatic warming in tropical regions in the coming decades; however, in situ field warming studies are severely lacking in tropical forests. Here we present results from an in situ warming experiment in Puerto Rico, where soil respiration responses to + 4 o C warming were assessed half-hourly for a year. Soil respiration rates were 42-204% higher in warmed relative to ambient plots, representing some of the highest soil respiration rates reported for any terrestrial ecosystem. While respiration rates were significantly higher in the warmed plots, the temperature sensitivity (Q 10 ) was 71.7% lower, pointing to a mechanistic shift. Even with reduced Q 10 , if observed soil respiration rates persist in a warmer world, the feedback to future climate could be considerably greater than previously predicted or observed.

Science & Technology - Other Topics↗
DOE OSTI2020

Impact of resonant magnetic perturbations on zonal flows and microturbulence

Results from a joint experimental and computational effort studying the effect of resonant magnetic perturbations (RMPs) on microturbulence levels and their connection to zonal flows in the DIII-D tokamak L-mode are presented. Beam emission spectroscopy measurements show a direct increase in density fluctuations at microturbulent scales with increasing RMP amplitude, suggesting that magnetic activity introduced by the RMP affects the regulation of microturbulence on DIII-D. This is analogous to how MHD-scale magnetic fluctuations arising from tearing modes have been observed in simulations to increase microturbulence levels in the reversed-field pinch (RFP). In the RFP, this is attributed to magnetic fluctuations eroding turbulence-limiting zonal flows; this work examines if a similar mechanism is present for DIII-D microturbulence. Gyrokinetic simulations find that the application of an RMP corresponds directly to a decrease in zonal flow levels, producing a similar increase of turbulent fluctuation levels over a range of RMP amplitudes as observed in the experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Regulation of the normalized rate of driven magnetic reconnection through shocked flux pileup

Magnetic reconnection is explored on the Terrestrial Reconnection Experiment (TREX) for asymmetric inflow conditions and in a configuration where the absolute rate of reconnection is set by an external drive. Magnetic pileup enhances the upstream magnetic field of the high-density inflow, leading to an increased upstream Alfvén speed and helping to lower the normalized reconnection rate to values expected from theoretical consideration. In addition, a shock interface between the far upstream supersonic plasma inflow and the region of magnetic flux pileup is observed, important to the overall force balance of the system, thereby demonstrating the role of shock formation for configurations including a supersonically driven inflow. Despite the specialized geometry where a strong reconnection drive is applied from only one side of the reconnection layer, previous numerical and theoretical results remain robust and are shown to accurately predict the normalized rate of reconnection for the range of system sizes considered. This experimental rate of reconnection is dependent on system size, reaching values as high as 0.8 at the smallest normalized system size applied.

Physics↗
DOE OSTI2021

A Case for Electron-Astrophysics

Abstract The smallest characteristic scales, at which electron dynamics determines the plasma behaviour, are the next frontier in space and astrophysical plasma research. The analysis of astrophysical processes at these scales lies at the heart of the research theme of electron-astrophysics. Electron scales are the ultimate bottleneck for dissipation of plasma turbulence, which is a fundamental process not understood in the electron-kinetic regime. In addition, plasma electrons often play an important role for the spatial transfer of thermal energy due to the high heat flux associated with their velocity distribution. The regulation of this electron heat flux is likewise not understood. By focussing on these and other fundamental electron processes, the research theme of electron-astrophysics links outstanding science questions of great importance to the fields of space physics, astrophysics, and laboratory plasma physics. In this White Paper, submitted to ESA in response to the Voyage 2050 call, we review a selection of these outstanding questions, discuss their importance, and present a roadmap for answering them through novel space-mission concepts.

79 ASTRONOMY AND ASTROPHYSICS↗