Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Development of large rotorcraft transmissions

The U.S. Army Heavy Lift Helicopter (HLH) represents a large rotorcraft which was developed by an American aerospace company. In the early 1970's with the HLH Advanced Technology Components (ATC) program, the development of large rotorcraft transmission and drive systems was started. Failures in the spiral bevel gearing were experienced in tests because the employed method of analysis had not considered the effect of rim bending. Consequently, new gears with strengthened rims were designed and fabricated. For a more accurate prediction of the load capacity of the gears, an extensive Finite Element Method (FEM) system was developed. The U.S. Army's XCH-62 HLH aft rotor transmission was finally successfully tested at full design torque and speed. A description of the test program is provided, and the analytical program is discussed. The analytical phase includes the development of a preprocessing program which aids in the review of calculated FEM stresses.

Samanich, N. E.↗
NASA NTRS1983

A finite element model for sound transmission through panels

A finite element method (FEM) is applied to predicting coupled frequencies and pressures within an acoustic cavity in order to characterize sound transmission through a panel. Structural equations of motion are defined and the FEM model is configured with four-noded plate elements, the lateral displacement and two slopes being the unknowns at every node. Each element then has 12 degrees of freedom (DOF) and the displacement variation is expressed by a 12-term nonconforming polynomial. A consistent mass matrix is used to represent the panel mass matrix and a wave equation governs the acoustic volume. Analysis of pressure and displacement over the panel yields a square coupling matrix, and an eigenanalysis leads to a solution of the forced vibration problem.

Ramakrishnan, J. V.↗
NASA NTRS1985

Analysis of Spiral Bevel Gearing

Program generalized for automated finite-element-method model generation. Tedious task of finite-element-method (FEM) model preparation greatly reduced by development of preprocessing program for automated model generation. Utility of program, including ability to rapidly evaluate parametric changes, demonstrated for spiral, helical, and spiral bevel gearing. Postprocessing program also developed, aids in review and interpretation of calculated FEM stresses.

Drago, R. J.↗
NASA NTRS1984

A finite element method for nonlinear forced vibrations of beams

Techniques for defining a finite element model (FEM) for analysis of nonlinear vibrations in beam structures subjected to harmonic excitation are presented. The resulting model covers longitudinal deformation and inertial effects. The nonlinear oscillations of a beam element under forced excitation are modeled by a harmonic force matrix based on first order approximations of the Jacobian elliptic forcing function. Harmonic force and nonlinear stiffness matrices are derived and the nonlinear forced responses of beams are calculated under various boundary conditions. The results of FEM computations for simply-supported and clamped beams show that midplane stretching caused by large deflections increases the nonlinearity. Axially-restrained beams experience only hardening nonlinearity, while axially-free beams have reduced nonlinearity in deformation and inertia and an increase in linearity due to large deflection.

Mei, C.↗
NASA NTRS1985

A high-precision finite element method for shock-tube calculations

A two-pass explicit scheme is developed in order to exploit some of the capabilities of finite difference modeling (FDM) for finite element modeling (FEM), which offers the opportunity to account for any type of geometry in fluid flow modeling. Features of the first-order upwind and the Lax-Wendroff high precision explicit finite difference algorithms are reviewed. A flux limiter is developed for FEM to serve as an analog for the single limiter function which has been defined for the various FDMs. It is shown that an antidiffusive limiter must be introduced into the weighting function which normally multiplies the time-derivative term in the variational equation. The two-pass scheme which results is demonstrated to be the equivalent of FDMs with five-point support. However, the present scheme is valid only for one-dimensional calculations and linear shape functions for shock tube flow phenomena. Further work is required for its use with nonlinear hyperbolic systems.

Hughes, T. J. R.↗
NASA NTRS1986

Survey of the status of finite element methods for partial differential equations

The finite element methods (FEM) have proved to be a powerful technique for the solution of boundary value problems associated with partial differential equations of either elliptic, parabolic, or hyperbolic type. They also have a good potential for utilization on parallel computers particularly in relation to the concept of domain decomposition. This report is intended as an introduction to the FEM for the nonspecialist. It contains a survey which is totally nonexhaustive, and it also contains as an illustration, a report on some new results concerning two specific applications, namely a free boundary fluid-structure interaction problem and the Euler equations for inviscid flows.

Temam, Roger↗
NASA NTRS1986

Adaptive finite element methods for compressible flow problems

Some recent work on adaptive FEMs for solving transient Euler equations in two-dimensional domains is summarized. The formulation of an FEM model of the Euler equations is shown, and the application of the adaptive strategies to data management schemes is addressed. Sample numerical results from the application of the model and strategies to the flow over a step and to transient cases are given.

Oden, J. T.↗
NASA NTRS1987

An approximate semi-analytical method for prediction of interlaminar shear stresses in an arbitrarily laminated thick plate

An approximate semianalytical method for determination of interlaminar shear stress distribution through the thickness of an arbitrarily laminated thick plate has been presented. The method is based on the assumptions of transverse inextensibility and layerwise constant shear angle theory (LCST) and utilizes an assumed quadratic displacement potential energy based finite element method (FEM). Centroid of the triangular surface has been proved from a rigorous mathematical point of view (Aubin-Nitsche theory), to be the point of exceptional accuracy for the interlaminar shear stresses. Numerical results indicate close agreement with the available three-dimensional elasticity theory solutions. A comparison between the present theory and that due to an assumed stress hybrid FEM suggest that the (normal) traction-free-edge condition is not satisfied in the latter approach. Furthermore, the present paper is the first to present the results for interlaminar shear stresses in a two-layer thick square plate of balanced unsymmetric angle-ply construction. A comparison with the recently proposed Equilibrium Method (EM) indicates the superiority of the present method, because the latter assures faster convergence as well as simultaneous vanishing of the transverse shear stresses on both of the exposed surfaces of the laminate. Superiority of the present method over the EM, in the case of a symmetric laminate, is limited to faster convergence alone. It has also been demonstrated that the combination of the present method and the reduced (quadratic order) numerical integration scheme yields convergence of the interlaminar shear stresses almost as rapidly as that of the nodal displacements, in the case of a thin plate.

Chaudhuri, Reaz A.↗
NASA NTRS1987

AH-64A shake test and correlation with NASTRAN finite element model predictions

A NASTRAN FEM code for the AH-64A helicopter airframe has been evaluated in light of suspended-fuselage shake tests that determined this aircraft's frequency-response characteristics at numerous measurement locations throughout the structure. Natural frequencies and mode shapes have been estimated from frequency-response data. On the basis of the correlation study results obtained, several modifications were made to the FEM model, yielding significant performance improvements.

Toossi, Mostafa↗
NASA NTRS1987

A transputer based finite element solver

The feasibility of performing FEM structural-mechanics analyses on transputer systems is investigated experimentally. Transputers are programmable microprocessors equipped with local memory and point-to-point communication links; they can be joined in a large concurrent system via a programming language which supports distributed processing; this permits parallel processing at relatively low hardware cost. The computational tasks required by FEM programs are reviewed; the hardware (one PC, one master transputer, and 12 slave transputers) employed in the test calculations is described; and results demonstrating the speed and efficiency of the transputer array in assembling a global stiffness matrix and performing Gauss-Jordan matrix inversion are presented in graphs. It is predicted that larger transputer networks could approach the power of supercomputers at minicomputer costs.

Favenesi, J. A.↗
NASA NTRS1988

Aeroelasticity and structural optimization of rotor blades with swept tips

In the present FEM scheme for the aeroelastic modeling of a swept-tip rotor blade, the swept tip of the blade is assumed to undergo moderate deflections in the flap, lag, and torsion degrees-of-freedom. The nonlinear PDEs of motion are discretized by a Galerkin-type FEM. This aeroelastic stability-and-response computational capability is combined with a structural optimization analysis to minimize the n/rev vertical hub shears in forward flight, subject to aeroelastic stability and frequency placement constraints. Tip sweep is used as a design variable to reduce vibration levels in forward flight.

Friedmann, P. P.↗
NASA NTRS1989

Unsteady Euler algorithm with unstructured dynamic mesh for complex-aircraft aeroelastic analysis

A finite-volume unstructured-grid FEM scheme with multistage Runge-Kutta time stepping is applied to the three-dimensional time-dependent Euler equations for inviscid flows on complex aircraft configurations undergoing structural deformation. The derivation of the model, the solution procedure, and the computer implementation are described, and results are presented graphically for a NASA Langley supersonic fighter aircraft model in steady and unsteady (harmonic oscillation in complete-vehicle bending mode) flow regimes. Good agreement between FEM predictions and experimental data is demonstrated.

Batina, John T.↗
NASA NTRS1989

An automated, integrated approach to Space Station structural modeling

NASA and its contractors have developed an integrated, interdisciplinary CAD/analysis system designated IDEAS(double asterisk)2 in order to conduct evaluations of alternative Space Station concepts' performance over the projected course of the Station's evolution in orbit. Attention is presently given to the requirements associated with automated FEM-building methods applicable to Space Station system-level structural dynamic analysis, and the ways in which IDEAS(double asterisk)2 addresses these requirements. Advantage is taken of the interactive capabilities of the SUPERTAB FEM preprocessor system for Space Station model manipulation and modification.

Lindenmoyer, Alan J.↗
NASA NTRS1989

Flutter testing of modern aircraft

Structural dynamicists avoid aircraft structural flutter through the use of flutter analyses, wind tunnel tests, ground-vibration tests, and flight flutter testing. FEM and unsteady aerodynamics models are often employed in analyses whose results' accuracies are verified by wind tunnel test results. Ground-vibratiuon testing is used to ascertain an airframe's resonant modes of vibration and their associated frequencies and damping rates; these data are then compared to the FEM analysis results. Flutter wind tunnel testing serves the same purpose for unsteady aerodynamic analysis as ground vibration testing does for the vibration analysis. Finally, flight flutter testing ensures that no flutter is present at any point in the envelope.

Johnson, Jeff↗
NASA NTRS1989

Strain measurements in a rotary engine housing

The development of structural design tools for Rotary Combustion Engines (RCE) using Finite Element Modeling (FEM) requires knowledge about the response of engine materials to various service conditions. This paper describes experimental work that studied housing deformation as a result of thermal, pressure and mechanical loads. The measurement of thermal loads, clamping pressure, and deformation was accomplished by use of high-temperature strain gauges, thermocouples, and a high speed data acquisition system. FEM models for heat transfer stress analysis of the rotor housing will be verified and refined based on these experimental results.

Lee, C. M.↗
NASA NTRS1989

Investigation of difficult component effects on finite element model vibration prediction for the Bell AG-1G helicopter. Volume 2: Correlation results

Under the NASA-sponsored DAMVIBS (Design Analysis Methods for VIBrationS) program, a series of ground vibration tests and NASTRAN finite element model (FEM) correlations were conducted on the Bell AH-1G helicopter gunship to investigate the effects of difficult components on the vibration response of the airframe. Previous correlations of the AG-1G showed good agreement between NASTRAN and tests through 15 to 20 Hz, but poor agreement in the higher frequency range of 20 to 30 Hz. Thus, this effort emphasized the higher frequency airframe vibration response correlations and identified areas that need further R and T work. To conduct the investigations, selected difficult components (main rotor pylon, secondary structure, nonstructural doors/panels, landing gear, engine, furl, etc.) were systematically removed to quantify their effects on overall vibratory response of the airframe. The entire effort was planned and documented, and the results reviewed by NASA and industry experts in order to ensure scientific control of the testing, analysis, and correlation exercise. In particular, secondary structure and damping had significant effects on the frequency response of the airframe above 15 Hz. Also, the nonlinear effects of thrust stiffening and elastomer mounts were significant on the low frequency pylon modes below main rotor 1p (5.4 Hz). The results of the NASTRAN FEM correlations are given.

Dompka, R. V.↗
NASA NTRS1991

Combined structures-controls optimization of lattice trusses

The role that distributed parameter model can play in CSI is demonstrated, in particular in combined structures controls optimization problems of importance in preliminary design. Closed form solutions can be obtained for performance criteria such as rms attitude error, making possible analytical solutions of the optimization problem. This is in contrast to the need for numerical computer solution involving the inversion of large matrices in traditional finite element model (FEM) use. Another advantage of the analytic solution is that it can provide much needed insight into phenomena that can otherwise be obscured or difficult to discern from numerical computer results. As a compromise in level of complexity between a toy lab model and a real space structure, the lattice truss used in the EPS (Earth Pointing Satellite) was chosen. The optimization problem chosen is a generic one: of minimizing the structure mass subject to a specified stability margin and to a specified upper bond on the rms attitude error, using a co-located controller and sensors. Standard FEM treating each bar as a truss element is used, while the continuum model is anisotropic Timoshenko beam model. Performance criteria are derived for each model, except that for the distributed parameter model, explicit closed form solutions was obtained. Numerical results obtained by the two model show complete agreement.

Balakrishnan, A. V.↗
NASA NTRS1990

Computational technology for flight vehicles; Proceedings of the Symposium, Washington, DC, Nov. 5-7, 1990

Recent advances in computational fluid mechanics are discussed in reviews and reports. Sections are devoted to (1) the modeling of local phenomena and edge effects in solids, (2) stochastic modeling and simulation of fracture toughness, and (3) partitioning strategy and new finite elements. Particular attention is given to global and local finite-element/spectral-boundary-element techniques for failure analysis, simulations of microfracture in metal-matrix composites, fatigue analysis of cracked anisotropic plates under stochastic loading, mathematical modeling for the analysis of nonlinear aircraft dynamics, physical and mathematical modeling of wave propagation in the Ariane 5 VEB structure, partitioning based on symmetry transformations, an FEM approach to adaptive reliability assurance, and time-domain FEMs for the large rotational dynamics of multibody systems.

Noor, Ahmed K.↗