Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic Procedures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Incorporating Valve Switching Losses Into a Static Optimal Control Algorithm for the Hybrid Hydraulic-Electric Architecture (HHEA)

The Hybrid Hydraulic-Electric Architecture (HHEA) has, in recent years, been proposed as an energy efficient alternative to conventional load-sensing architectures in mobile machines such as excavators and wheel-loaders. HHEA leverages the advantages of hydraulic power and electric power to eliminate throttling valves while also improving the energy and control performance of the system. The architecture utilizes a set of common pressure rails to provide a majority of power and and a small electric motor driven pump to modulate this power to meet the exact demand. Previous work has developed a computationally efficient Lagrange Multiplier approach for determining the optimal pressure rail selections that minimizes the energy losses in the system. The static model used considers only the energy use for each pressure rail selection but not the losses associated with the valves during the transition. This paper presents an approach to include the switching losses in the model and in the optimization procedure. To capture the switching losses, switching events between different rails and at various input and output flow rates were simulated with consideration of valve spool dynamics. A parameterized model that summarizes the losses is then obtained, allowing switching losses to be added to the previous energy analysis. The performance of the switching loss model was compared with reference data obtained from a high-fidelity simulation model. To incorporate the switching losses into optimal control algorithm, an efficient dynamic programming approach that prevents frequent switching is adopted in place of the Lagrange multiplier approach. The overall effect of switching losses on the energy consumption and optimal control decisions is presented. In general, switching losses contribute to about 9–10% of input energy.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Editors’ Choice—Rapid Deactivation Convolutes Electrochemical CO 2 Reduction Selectivity Measurements on Gold Rotating Ring Disk Electrodes

Voltammetric measurements of electrochemical CO 2 reduction reaction (CO 2 RR) selectivity on rotating ring disk electrodes (RRDE) are a rapid and sensitive method for quantifying an electrocatalyst’s selectivity, i.e. faradaic efficiency (FE). This method has been applied to polycrystalline Au electrocatalysts where a Au disk electrode catalyzes both the CO 2 RR and hydrogen evolution reaction while the concentric Au ring electrode selectively senses CO by oxidizing CO back to CO 2 . Such measurements enabled fundamental mechanistic studies but suffer from poor inter-laboratory reproducibility. This work identifies causes of variability in RRDE selectivity measurements by comparing protocols with different electrochemical methods, reagent purities, and glassware cleaning procedures. We observed FE CO decrease by 56% during 5 min chronoamperometry measurements, a phenomenon that is not readily apparent in voltammetric scans due to their dynamic nature. Electroplating of electrolyte impurities onto the disk and ring surfaces were identified as a major contributor to Au deactivation. Additionally, the oxygen reduction reaction may lead to higher disk currents in inadequately purged electrolytes, causing an apparent underestimation of FE CO at low overpotentials. Lastly, we propose operational bounds for CO 2 RR selectivity measurements on Au using the RRDE method and provide suggestions on steps for improving the accuracy of this technique.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Entropy Pair Functional Theory: Direct Entropy Evaluation Spanning Phase Transitions

We prove that, within the class of pair potential Hamiltonians, the excess entropy is a universal, temperature-independent functional of the density and pair correlation function. This result extends Henderson’s theorem, which states that the free energy is a temperature dependent functional of the density and pair correlation. The stationarity and concavity of the excess entropy functional are discussed and related to the Gibbs–Bugoliubov inequality and to the free energy. We apply the Kirkwood approximation, which is commonly used for fluids, to both fluids and solids. Approximate excess entropy functionals are developed and compared to results from thermodynamic integration. The pair functional approach gives the absolute entropy and free energy based on simulation output at a single temperature without thermodynamic integration. We argue that a functional of the type, which is strictly applicable to pair potentials, is also suitable for first principles calculation of free energies from Born–Oppenheimer molecular dynamics performed at a single temperature. In conclusion, this advancement has the potential to reduce the evaluation the free energy to a simple modification to any procedure that evaluates the energy and the pair correlation function.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Dynamics retrieval from stochastically weighted incomplete data by low-pass spectral analysis

Time-resolved serial femtosecond crystallography (TR-SFX) provides access to protein dynamics on sub-picosecond timescales, and with atomic resolution. Due to the nature of the experiment, these datasets are often highly incomplete and the measured diffracted intensities are affected by partiality. To tackle these issues, one established procedure is that of splitting the data into time bins, and averaging the multiple measurements of equivalent reflections within each bin. This binning and averaging often involve a loss of information. Here, we propose an alternative approach, which we call low-pass spectral analysis (LPSA). In this method, the data are projected onto the subspace defined by a set of trigonometric functions, with frequencies up to a certain cutoff. This approach attenuates undesirable high-frequency features and facilitates retrieving the underlying dynamics. A time-lagged embedding step can be included prior to subspace projection to improve the stability of the results with respect to the parameters involved. Subsequent modal decomposition allows to produce a low-rank description of the system's evolution. Using a synthetic time-evolving model with incomplete and partial observations, we analyze the LPSA results in terms of quality of the retrieved signal, as a function of the parameters involved. We compare the performance of LPSA to that of a range of other sophisticated data analysis techniques. We show that LPSA allows to achieve excellent dynamics reconstruction at modest computational cost. Finally, we demonstrate the superiority of dynamics retrieval by LPSA compared to time binning and merging, which is, to date, the most commonly used method to extract dynamical information from TR-SFX data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

An Eulerian Vlasov-Fokker–Planck algorithm for spherical implosion simulations of inertial confinement fusion capsules

Here, we present a numerical algorithm that enables a phase-space adaptive Eulerian Vlasov–Fokker–Planck (VFP) simulation of inertial confinement fusion (ICF) capsule implosions. The approach relies on extending a recent mass, momentum, and energy conserving phase-space moving-mesh adaptivity strategy to spherical geometry. In configuration space, we employ a mesh motion partial differential equation (MMPDE) strategy while, in velocity space, the mesh is expanded/contracted and shifted with the plasma’s evolving temperature and drift velocity. The mesh motion is dealt with by transforming the underlying VFP equations into a computational (logical) coordinate, with the resulting inertial terms carefully discretized to ensure conservation. To deal with the spatial and temporally varying dynamics in a spherically imploding system, we have developed a novel nonlinear stabilization strategy for MMPDE in the configuration space. The strategy relies on a nonlinear optimization procedure that optimizes between mesh quality and the volumetric rate change of the mesh to ensure both accuracy and stability of the solution. Implosions of ICF capsules are driven by several boundary conditions: (1) an elastic moving wall boundary; (2) a time-dependent Maxwellian Dirichlet boundary; and (3) a pressure-driven Lagrangian boundary. Of these, the pressure-driven Lagrangian boundary driver is new to our knowledge. The implementation of our strategy is verified through a set of test problems, including the Guderley and Van-Dyke implosion problems — the first-ever reported using a Vlasov–Fokker–Planck model.

1D2V↗
DOE OSTI2023

Inference finds consistency between a neutrino flavor evolution model and Earth-based solar neutrino measurements

We continue examining statistical data assimilation (SDA), an inference methodology, to infer solutions to neutrino flavor evolution, for the first time using real - rather than simulated - data. The model represents neutrinos streaming from the Sun's center and undergoing a Mikheyev-Smirnov-Wolfenstein (MSW) resonance in flavor space, due to the radially-varying electron number density. The model neutrino energies are chosen to correspond to experimental bins in the Sudbury Neutrino Observatory (SNO) and Borexino experiments, which measure electron-flavor survival probability at Earth. In conclusion, the procedure successfully finds consistency between the observed fluxes and the model, if the MSW resonance - that is, flavor evolution due to solar electrons - is included in the dynamical equations representing the model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

LANL Meteorological Program Self-Assessment 2021 Update

This self-assessment, documented in Table 1, has shown that there has been continued significant progress achieved in meeting the intent of the 21 recommendations from the 2015 DMCC Assist Visit. Every year after the Assist Visit, the LANL Met Program has improved, mainly by addressing the recommendations in the Assist Visit report. The Met Program management should continue to strive to apply its limited resources and seek to acquire additional human capital and physical resources to meet the dynamic needs of its growing sitewide customer base. This includes additional upgrading of the hardware and software elements of the Met Program and implementation of its operational procedures and QAPP to ensure it will consistently meet important present program requirements, as well as anticipated future requirements. These improvements have been summarized in the “present improvements and future initiatives” column in Table 1.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Latent-Space Dynamics for Prediction and Fault Detection in Geothermal Power Plant Operations

This paper presents a latent-space dynamic neural network (LSDNN) model for the multi-step-ahead prediction and fault detection of a geothermal power plant’s operation. The model was trained to learn the dynamics of the power generation process from multivariate time-series data and the effects of exogenous variables, such as control adjustment and ambient temperature. In the LSDNN model, an encoder–decoder architecture was designed to capture cross-correlation among different measured variables. In addition, a latent space dynamic structure was proposed to propagate the dynamics in the latent space to enable prediction. The prediction power of the LSDNN was utilized for monitoring a geothermal power plant and detecting abnormal events. The model was integrated with principal component analysis (PCA)-based process monitoring techniques to develop a fault-detection procedure. The performance of the proposed LSDNN model and fault detection approach was demonstrated using field data collected from a geothermal power plant.

15 GEOTHERMAL ENERGY↗
DOE OSTI2026

Data-Driven Modeling and Correction of Vehicle Dynamics

We develop a data-driven framework for learning and correcting nonautonomous vehicle dynamics. Physics-based vehicle models are often simplified for tractability and therefore exhibit inherent model-form uncertainty, motivating the need for data-driven correction. Moreover, nonautonomous dynamics are governed by time-dependent control inputs, which pose challenges in learning predictive models directly from temporal snapshot data. To address these, we reformulate the vehicle dynamics via a local parameterization of the time-dependent inputs, yielding a modified system composed ofa sequence of local parametric dynamical systems. Here, we approximate these parametric systems using two complementary approaches. First, we employ the dimension reduction and interpolation in parameter space (DRIPS) methodology to construct efficient linear surrogate models, equipped with lifted observable spaces and manifold-based operator interpolation. This enables data-efficient learning of vehicle models whose dynamics admit accurate linear representations in the lifted spaces. Second, for more strongly nonlinear systems, we employ flow map learning (FML), a deep neural network (DNN) approach that approximates the parametric evolution map without requiring special treatment of nonlinearities. We further extend FML with a transfer-learning-based model correction procedure, enabling the correction of misspecified prior models using only a sparse set of high-fidelity or experimental measurements, without assuming a prescribed form for the correction term. Through a suite of numerical experiments on unicycle, simplified bicycle, and slip-based bicycle models, we demonstrate that DRIPS offers robust and highly data-efficient learning of nonautonomous vehicle dynamics, while FML provides expressive nonlinear modeling and effective correction of model-form errors under severe data scarcity.

data-driven modeling↗
DOE OSTI2021

High-Efficiency, Low-Cost III-V Solar Cells by Dynamic Hydride Vapor Phase Epitaxy Coupled with Rapid, Polishing-Free Wafer Reuse through Orientation-Optimized (110) Spalling

We demonstrated (110) GaAs solar cells grown by D-HVPE with equivalent performance and material quality relative to (100) devices. Also, we developed a procedure for repeatable wafer-scale spalling of (110) GaAs. Spalled surfaces were free of the facets founds in (100) GaAs spalling, the large arrest lines found in (100) Ge spalling, and surface features greater than 3 µm in peak-to-valley height, which can otherwise degrade the efficiency of regrown III-V devices. A sub-µm step-terrace morphology was discovered on the post-spall wafer surface, resulting from the restricted cleavage system of GaAs, but we developed understanding of the factors that determine the resulting morphology, enabling ample opportunity for optimization of morphologies suitable for device growth and spall depth waste minimization on (110) GaAs. Lastly, we demonstrated a device grown on a previously spalled surface with only 8% relative efficiency difference to a cell grown on a new unspalled wafer. Significant optimization of the substrate regrowth conditions are required to enable higher efficiency, but these results highlight the promise of (110)-oriented devices coupled with substrate reuse by spalling as a pathway for low-cost III-V photovoltaics.

14 SOLAR ENERGY↗
DOE OSTI2026

Validated ligand geometries for macromolecular refinement restraints and molecular-mechanics force fields

In macromolecular structure refinement, the low observation-to-parameter ratio and the lack of high-resolution data are countered by using a priori information in the form of restraints. Having accurate geometries of the chemical entities in the sample is paramount for generating accurate chemical restraints and, therefore, accurate macromolecular structures. In particular, it is desirable to have accurate restraints for known and novel ligand entities. Quantum mechanics (QM) can minimize the energy of a ligand by adjusting its geometry, and these geometries can be used to generate restraints for macromolecular refinement. This article describes a library of approximately 37 000 small molecules extracted from the Chemical Component Dictionary in the Protein Data Bank and minimized by density-functional QM. The library includes restraint files for use in crystallography or cryo-EM refinement, along with files suitable for molecular-dynamics simulation. Because the geometries are validated using the Cambridge Structural Database, the restraints library provides users with both functional restraints and minimized geometries. This work also provides procedures for generating new and accurate restraints.

Amber↗
DOE OSTI2021

Solid-state NMR of unlabeled plant cell walls: high-resolution structural analysis without isotopic enrichment

Abstract Background Multidimensional solid-state nuclear magnetic resonance (ssNMR) spectroscopy has emerged as an indispensable technique for resolving polymer structure and intermolecular packing in primary and secondary plant cell walls. Isotope ( 13 C) enrichment provides feasible sensitivity for measuring 2D/3D correlation spectra, but this time-consuming procedure and its associated expenses have restricted the application of ssNMR in lignocellulose analysis. Results Here, we present a method that relies on the sensitivity-enhancing technique Dynamic Nuclear Polarization (DNP) to eliminate the need for 13 C-labeling. With a 26-fold sensitivity enhancement, a series of 2D 13 C– 13 C correlation spectra were successfully collected using the unlabeled stems of wild-type Oryza sativa (rice). The atomic resolution allows us to observe a large number of intramolecular cross peaks for fully revealing the polymorphic structure of cellulose and xylan. NMR relaxation and dipolar order parameters further suggest a sophisticated change of molecular motions in a ctl1 ctl2 double mutant: both cellulose and xylan have become more dynamic on the nanosecond and microsecond timescale, but the motional amplitudes are uniformly small for both polysaccharides. Conclusions By skipping isotopic labeling, the DNP strategy demonstrated here is universally extendable to all lignocellulose materials. This time-efficient method has landed the technical foundation for understanding polysaccharide structure and cell wall assembly in a large variety of plant tissues and species.

09 BIOMASS FUELS↗
DOE OSTI2022

Structure- and Interaction-Based Design of Anti-SARS-CoV-2 Aptamers

Aptamer selection against novel infections is a complicated and time-consuming approach. Synergy can be achieved by using computational methods together with experimental procedures. In this study, we aim to develop a reliable methodology for a rational aptamer in silico et vitro design. The new approach combines multiple steps: (1) Molecular design, based on screening in a DNA aptamer library and directed mutagenesis to fit the protein tertiary structure; (2) 3D molecular modeling of the target; (3) Molecular docking of an aptamer with the protein; (4) Molecular dynamics (MD) simulations of the complexes; (5) Quantum-mechanical (QM) evaluation of the interactions between aptamer and target with further analysis; (6) Experimental verification at each cycle for structure and binding affinity by using small-angle X-ray scattering, cytometry, and fluorescence polarization. By using a new iterative design procedure, structure- and interaction-based drug design (SIBDD), a highly specific aptamer to the receptor-binding domain of the SARS-CoV-2 spike protein, was developed and validated. The SIBDD approach enhances speed of the high-affinity aptamers development from scratch, using a target protein structure. The method could be used to improve existing aptamers for stronger binding. This approach brings to an advanced level the development of novel affinity probes, functional nucleic acids. It offers a blueprint for the straightforward design of targeting molecules for new pathogen agents and emerging variants.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

A Laplace-Domain Circuit Model for Fault and Stability Analysis Considering Unbalanced Topology

For systems subject to unbalanced faults, analytical model building for stability assessment is a challenging task. This letter presents a straightforward modeling approach. A generalized dynamic circuit representation is achieved by use of the Laplacian transform variable s . Here, we translate the voltage and current relationship at the fault location into the relationship of three subsystems. The final circuit model is an interconnected sequence network with impedances in the Laplace domain. This circuit can be directly converted from a steady-state sequence network. This modeling procedure is illustrated by an example case of an induction motor served by a grid through a series compensated line. Electromagnetic transient simulation results demonstrate that sub-synchronous oscillations can be mitigated when a single-line to ground fault is applied at the motor terminal. Stability analysis results based on the dynamic circuit corroborate the simulation results. What's more, the derived circuit effortlessly reveals why unbalance can enhance stability.

42 ENGINEERING↗
DOE OSTI2023

Use-Inspired, Process-Oriented GCM Selection: Prioritizing Models for Regional Dynamical Downscaling

Dynamical downscaling is a crucial process for providing regional climate information for broad uses, using coarser-resolution global models to drive higher-resolution regional climate simulations. The pool of global climate models (GCMs) providing the fields needed for dynamical downscaling has increased from the previous generations of the Coupled Model Intercomparison Project (CMIP). However, with limited computational resources, the need for prioritizing the GCMs for subsequent downscaling studies remains. GCM selection for dynamical downscaling should focus on evaluating processes relevant for providing boundary conditions to the regional models and be inspired by regional uses such as the response of extremes to changes in the boundary conditions. This leads to the need for metrics representing processes of relevance to diverse stakeholders and subregions of a domain. Procedures to account for metric redundancy and the statistical distinguishability of GCM rankings are required. Further, procedures for selecting realizations from ensembles of top-performing GCM simulations can be used to span the range of climate change signals in multiple ways. As a result, distinct weighting of metrics and prioritization of particular realizations may depend on user needs. We provide high-level guidelines for such region-specific evaluations and address how CMIP7 might enable dynamical downscaling of a representative sample of high-quality models across representative shared socioeconomic pathways (SSPs).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Recycled polyethylene and crumb rubber composites modified asphalt with improved aging resistance and thermal stability

Crumb rubbers (CR) and recycled Polyethylene (PE) are commonly used as modifiers to improve the asphalt properties. However, the addition of these modifiers individually may result in phase separation of PE and inadequate degradation of CR, which may not simultaneously satisfy the rheological and aging resistance of the binder blends. In this study, a type of CR/PE composites manufactured through melt extrusion procedures was adopted for the improvement of the modified binder blends. The modified binder blends after short-term (RTFO) and long-term (PAV) aging were collected for dynamic shear rheometer and bending beam rheometer tests. FTIR tests were also used to quantify the aging resistance, while differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were applied to evaluate the thermal behaviors of the binder blends. Optical microscopy tests were used to explore the modification mechanism and visualize the microstructures of original and PAV aged binder blends. Test results showed that CR/PE composites could significantly improve the aging resistance of the binder blends. The dispersed PE particles still interacted with each other and meanwhile worked with the diffused rubbery phase, which could form a similar TPEs network. The oxidation and high-temperature aging of such binder blends would strengthen the network that resisted the aging severity of the binder blends. Furthermore, it was also revealed that CR/PE modified asphalt could sustain more heat before a rapid degradation and the well-dispersed PE particles could interact with the diffused CR particles to form a network to resist aging.

02 PETROLEUM↗
DOE OSTI2026

Symmetrizing relativistic three-body partial wave amplitudes

S matrix principles and symmetries impose constraints on three-particle scattering amplitudes, which can be formulated as a class of integral equations for their partial wave projections. However, these amplitudes are typically expressed in an asymmetric basis, where one of the initial and final state particles is singled out, and all quantum numbers are defined relative to this spectator. In this work, we show how to construct symmetric partial wave amplitudes, which have been symmetrized over all possible spectator combinations, using their asymmetric counterparts and sets of recoupling coefficients. We derive these recoupling coefficients for arbitrary angular momentum and isospin for arbitrary systems of spinless particles with SU(2) flavor symmetry. We propose a simple intensity observable suitable for visualizing the structure of three-body dynamics in Dalitz distributions. Finally, we provide some numerical examples of Dalitz distributions relevant for future lattice QCD calculations of 3⁢𝜋 systems and provide numerical evidence that the symmetrization procedure is consistent with expected symmetries of Dalitz plots.

Lattice QCD↗
DOE OSTI2020

Control-Oriented Modeling of Cycle-to-Cycle Combustion Variability at the Misfire Limit in SI Engines

A control-oriented model is presented that can capture the prior-cycle correlation of combustion cycles during conditions with high levels of exhaust gas recirculation (EGR). Combustion events are modeled in discrete time and the dynamic evolution is captured by the residual air, fuel, and inert gas trapped in the combustion chamber. The mathematical formulation of the model is presented together with the calibration procedure to emulate a particular engine operating condition. A cycle-to-cycle system identification methodology is described which allows regressing model parameters from experimental data. Simulations are presented and compared to real engine measurements to show the modeling potential for analysis and control of combustion events.

Maldonado Puente, Bryan↗