Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Drainage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Determination of transition metal ions in fossil fuel associated wastewaters using chelation ion chromatography

Here, this study outlines the development and subsequent validation of a method using chelation ion chromatography (CIC) pretreatment followed by traditional ion chromatography (IC) and post column UV/vis detection to measure transition metals in fossil fuel wastewaters, such as oil & gas (O&G) brines and coal mine drainage (CMD) waters. Measurement of transition metals is often an important characterization step in the research of environmental and energy systems. IC represents one way to measure these metals with the advantages of being versatile, simple and relatively low cost compared to other analytical methods. However, high concentrations of alkali and alkaline earth metals present in fossil fuel wastewaters will decrease IC detectability of transition metals in these waters. In this study, a CIC method was developed for the analysis of transition metal ions (Fe 3+ , Cu 2+ , Ni 2+ , Zn 2+ , Co 2+ , Mn 2+ , and Fe 2+ ) in fossil fuel associated wastewaters such as Appalachian CMD and O&G wastewaters from the Permian and Bakken shale basins in the United States. CIC system incorporated an on-line chelator column (e.g., the MetPac CC-1) with high selectivity for transition metals over alkali and alkaline earth metals for salt matrix removal prior to transition metal separation and detection. Additional method developments also included acidifying all samples to 2% v/v HCl and using gradient elution rather than isocratic. The recoverability of transition metals in simple salt solutions commonly found in CMD and brine samples (e.g. NaCl, Na 2 SO 4 , CaCl 2 ) using CIC was evaluated and compared to that using traditional IC. Our results found that the CIC system significantly improved transition metal recoveries for samples in 10,000 mg/L CaCl 2 matrix, reaching 87%-108% recovery for all analytes, as opposed to 2-323% recovery in traditional IC. The limits of detection in this study achieved 10.09 – 161.2 μg/L, comparable to reported values in similar IC studies. The developed method was also verified with certified water samples, resulting in 89% - 111% recoveries in samples with higher analyte concentrations (i.e. >4x the LoDs). The developed method achieved 87% -112% recoveries for most analytes in CMD samples and 72%-138% recoveries for Bakken shale samples, relative to ICP-MS values. Overall, the current IC method can be a very good screening tool for fast and cheap analysis for transition metals at mg/L level, to facilitate selection of samples for more detailed ICP-MS analysis.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Pulsed laminar falling films in vertical tubes: Maintaining a continuous liquid film with reduced film thickness

Falling-liquid-film heat transfer is important to a wide variety of industrial applications, including two-phase thermosyphons, falling-film evaporators in the food industry, heat exchangers in fuel-ethanol processing, and the chemical service industry. Particularly for laminar falling films, the heat transfer increases as the film thickness decreases, hence it is desirable to keep the films as thin as possible. This article presents a periodically-pulsed flow concept to reduce the average mass flow inside a vertical tube. The technique provides thinner films than can be achieved with continuous flow. A drainage model is adopted to predict the film thickness as a function of flow rate and location along the tube. The concept is confirmed experimentally by measuring the film thickness in real time in a circular tube using a laser-based absorption technique. A new heat-transfer-based film continuity measurement is also integrated into the optical film measurement setup. Water at ambient temperature and pressure is used for this work. Film thickness reductions of up to 60%, and liquid-film volume-flow reductions of up to 80% compared to the minimum continuous-flow film have been obtained. The time-varying film thickness profile can also be controlled to a limited extent, which may be of interest for process industries.

42 ENGINEERING↗
DOE OSTI2023

Chromium isotopes in an acidic fluvial system: Implications for modern and ancient Cr isotope records

Chromium is an important redox-active element, with significant Cr isotope fractionations driven by redox transformations in the natural environment and quantified through laboratory experiments. Recent work has demonstrated that non-redox-driven transformations can also produce small variations in Cr isotopes, but the role of these processes in controlling environmental Cr isotope variations remains unclear. The highly acidic but biologically diverse acid rock drainage system in Río Tinto, Spain (and affiliated rivers) provides a unique opportunity to examine how non-redox-related processes can substantially affect the isotopic composition of Cr in a natural system. Our results suggest that under conditions where Cr redox transformations are obviated, Cr cycling is largely controlled by formation of Fe-oxyhydroxides and Fe-hydroxysulfates, Cr adsorption, and Cr speciation, with little apparent Cr isotope fractionation between source materials, waters, and sediments. Moderate Cr isotope shifts, however, may be the result of non-redox processes, including adsorption to organic ligands and potentially biological uptake. These results add to a growing body of evidence for the importance of non-redox transformations in contributing to environmental Cr isotope variations, with implications for the use of chromium isotopes in studies of sedimentary Cr isotope records. In particular, this study is a validation of the potential for sulfide weathering in the Proterozoic to deliver relatively unfractionated Cr isotopes to the ocean, despite rising and sustained high oxygen levels.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Influence of the Anionic Zinc-Adeninate Metal–Organic Framework Structure on the Luminescent Detection of Rare Earth Ions in Aqueous Streams

Rare earth elements (REEs) are critical to numerous technologies; however, a combination of increasing demand, environmental concerns, and monopolistic marketplace conditions has spurred interest in boosting the domestic REE production from sources such as coal utilization byproducts. The economic viability of this approach requires rapid, inexpensive, and sensitive analytical techniques capable of characterizing the REE content during resource exploration and downstream REE processing (e.g., analyzing REE separation, concentration, and purification production steps). Luminescence-based sensors are attractive because many REEs may be sensitized to produce element-specific emission. Hence, a single material may simultaneously detect and distinguish multiple REEs. Metal–organic frameworks (MOFs) can sensitize multiple REEs, but their viability has been hindered by sensitivity and selectivity challenges. Understanding how the MOF structure impacts the REE sensing efficacy is critical to the rational design of new sensors. Here, we evaluate the sensing performance of seven different anionic zinc-adeninate MOFs with different organic linkers and/or structures for the visible-emitting REEs Tb, Dy, Sm, and Eu. The choice of a linker determines which REEs are sensitized and significantly influences their sensitivity and selectivity against competing species (here, Fe(II) and HCl). For a given linker, structural changes to the MOF can further fine-tune the performance. The MOFs produce some of the lowest detection limits (sub-10 ppb for Tb) reported for the aqueous sensitization-based REE detection. Importantly, the most selective MOFs demonstrated the ability to sensitize the REE signal at sub-ppm levels in a REE-spiked acid mine drainage matrix, highlighting their potential for use in real-world sensing applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Emergent Behavior at the Calcite–Water Interface during Reactive Transport in a Simple Microfluidic Channel

Geochemical reactive transport processes in natural mineral-fluid systems may produce a wide array of emergent phenomena that are difficult to predict from basic principles and to reproduce in model systems. In this study, we present experimental results obtained from a simple microfluidic system with which we explored the consequences of reacting the calcite (104) cleavage surface with an acidic Pb-bearing solution (pH = 3.5, [Pb] total = 5 mM) as a function of flow rate. This system is relevant to passive remediation systems for Pb-rich acid mine drainage. We observed periodic banding in the amounts of Pb sorption at flow velocities ≥ 926 μm s -1 , where the band spacing was spatially correlated with the amount of calcite dissolution and the development of micropyramidal topography on the calcite (104) surface. The equivalent coverage of Pb deposited in these Pb-rich bands was at least several monolayers per unit cell, yet there was no evidence for precipitation of any secondary Pb phase implying incorporation of Pb within the near-surface calcite lattice. We also observed spatial variations in nucleation and growth of euhedral secondary Pb-carbonate minerals hydrocerusite and cerussite at flow rates ≤ 278 μm s -1 ,. These findings demonstrate potential for exploiting the rich phenomenology afforded by the interplay among transport phenomena and chemical kinetics in experimental systems designed to yield deeper insights into geochemical self-organization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Sustained Oxygen Spectral Gaps and Their Dynamic Evolution in the Inner Magnetosphere

Van Allen Probes observations of ion spectra often show a sustained gap within a very narrow energy range throughout the full orbit. To understand their formation mechanism, we statistically investigate the characteristics of the narrow gaps for oxygen ions and find that they are most frequently observed near the noon sector with a peak occurrence rate of over 30%. The magnetic moment (μ) of the oxygen ions in the gap shows a strong dependence on magnetic local time (MLT), with higher and lower μ values in the morning and afternoon sectors, respectively. Moreover, we find through superposed epoch analysis that the gap formation also depends on geomagnetic conditions. Those gaps formed at lower magnetic moments (μ < 3,000 keV/G) are associated with stable convection electric fields, which enable magnetospheric ions to follow a steady drift pattern that facilitates the gap formation by corotational drift resonance. On the other hand, gaps with higher μ values are statistically preceded by a gradual increase of geomagnetic activity. Here, we suggest that ions within the gap were originally located inside the Alfven layer following closed drift paths, before they were transitioned into open drift paths as the convection electric field was enhanced. The sunward drift of these ions, with very low fluxes, forms a drainage void in the dayside magnetosphere manifested as the sustained gap in the oxygen spectrum. This scenario is supported by particle-tracing simulations, which reproduce most of the observed characteristics and therefore provide new insights into inner magnetospheric dynamics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

NEWTS Integrated Dataset (version 1.0)

The National Energy Water Treatment and Speciation (NEWTS) Integrated Dataset v1.0 provides water researchers, community leaders, and regulators with a unified and standardized energy-related wastewater stream database. This resource is derived from 27 state and federal entities, and scientific publications, and contains more than 400,000 sample records, many of which also provide geospatial information. The dataset includes data for several different energy-related wastewater types including produced water, other oil and gas wastewaters, mine drainage, coal ash leachate, and power plant wastewater. The NEWTS Integrated Dataset was built to support environmentally prudent decision-making, explore treatment opportunities, and identify potential critical mineral sources. A subset of this novel resource is also featured on NETL NEWTS State-Level Database Dashboard. Additional data can be found in the NEWTS EDX Group and the NEWTS Federal Database Dashboard.

abandoned mine drainage↗
DOE OSTI2025

NEWTS Economic Data Dashboard: Critical Materials for Energy

The NEWTS Economic Data Dashboard: Critical Materials for Energy is an economic screening tool for assessing the concentration and potential value of the 18 critical materials for energy in fossil energy-related wastewater across the United States. Datasets used to develop the dashboard and complete economic calculations are available as supplementary downloads. These resources were developed primarily using geochemical composition and volume data from the NEWTS Integrated dataset (version 1.0). Energy-related wastewater types presented in the dashboard include produced water (PW), brackish groundwater (BW), acid mine drainage (AMD), coal combustion residual leachate (CCRL), power plant flue gas desulfurization wastewater (FGD), and geothermal fluids. The concentrations of the following critical minerals were included in the analysis, when available: Al, Co, Cu, Dy, F, Ga, Ge, C, Ir, Li, Mg, Mn, Nd, Ni, Pt, Pr, Si, Tb. This economic screening tool was built to support identification of promising critical mineral feedstocks and economic research targets.

Critical Minerals; Critical Minerals and Materials↗
DOE OSTI2026

NEWTS Integrated Dataset (version 2.0)

The National Energy Water Treatment and Speciation (NEWTS) Integrated Dataset v2.0 provides water researchers, community leaders, regulators, and industry stakeholders with a unified and standardized energy-process wastewater chemistry database. This resource is derived from 39 state and federal entities, and scientific publications, and contains more than 700,000 sample records, many of which also provide geospatial information. The dataset includes chemistry data for several different energy-process wastewater types including produced water, other oil and gas wastewaters, mine drainage, coal ash leachate, power plant wastewater, and geothermal fluids. The NEWTS Integrated Dataset was built to support prudent decision-making, characterization of potential critical mineral sources, and modeling of treatment and valorization options. A subset of this novel resource is also featured on the NEWTS State-Level Database Dashboard. Additional data can be found in the NEWTS EDX Group and the NEWTS Federal Database Dashboard.

AMD↗
DOE OSTI2021

Saturated Bioenergy Buffers: Site Suitability Classification and Estimated Areas of Candidate Sites in the U.S. Midwest Under Three Scenarios

The loss of nutrients applied to tile-drained row-crop fields is a critically important component of agriculture’s impact on surface water quality, because drain tiles provide a short circuit to ditches and creeks, resulting in rapid nutrient loss. This nutrient loss ultimately advances eutrophication and hypoxia, i.e., the creation of dead zones in bodies of water, both locally and regionally (for example, in western Lake Erie and the Gulf of Mexico). Saturated buffers help address the tile-drainage water quality problem, and incorporating bioenergy crops into saturated bioenergy buffers could provide both environmental protection and an additional source of income for farmers.

09 BIOMASS FUELS↗
DOE OSTI2020

Policy Innovation and Governance for Irrigation Sustainability in the Arid, Saline San Joaquin River Basin

This paper provides a chronology and overview of events and policy initiatives aimed at addressing irrigation sustainability issues in the San Joaquin River Basin (SJRB) of California. Although the SJRB was selected in this case study, many of the same resource management issues are being played out in arid, agricultural regions around the world. The first part of this paper provides an introduction to some of the early issues impacting the expansion of irrigated agriculture primarily on the west side of the San Joaquin Valley and the policy and capital investments that were used to address salinity impairments to the use of the San Joaquin River (SJR) as an irrigation water supply. Irrigated agriculture requires large quantities of water if it is to be sustained, as well as supply water of adequate quality for the crop being grown. The second part of the paper addresses these supply issues and a period of excessive groundwater pumping that resulted in widespread land subsidence. A joint federal and state policy response that resulted in the facilities to import Delta water provided a remedy that lasted almost 50 years until the Sustainable Groundwater Management Act of 2014 was passed in the legislature to address a recurrence of the same issue. The paper describes the current state of basin-scale simulation modeling that many areas, including California, are using to craft a future sustainable groundwater resource management policy. The third section of the paper deals with unique water quality issues that arose in connection with the selenium crisis at Kesterson Reservoir and the significant threats to irrigation sustainability on the west side of the San Joaquin Valley that followed. The eventual policy response to this crisis was incremental, spanning two decades of University of California-led research programs focused on finding permanent solutions to the salt and selenium contamination problems constraining irrigated agriculture, primarily on the west side. Arid-zone agricultural drainage-induced water quality problems are becoming more ubiquitous worldwide. One policy approach that found traction in California is an innovative variant on the traditional Total Maximum Daily Load (TMDL) approach to salinity regulation, which has features in common with a scheme in Australia’s Hunter River Basin. The paper describes the real-time salinity management (RTSM) concept, which is geared to improving coordination of west side agricultural and wetland exports of salt load with east side tributary reservoir release flows to improve compliance with river salinity objectives. RTSM is a concept that requires access to continuous flow and electrical conductivity data from sensor networks located along the San Joaquin River and its major tributaries and a simulation model-based decision support designed to make salt load assimilative capacity forecasts. Web-based information dissemination and data sharing innovations are described with an emphasis on experience with stakeholder engagement and participation. The last decade has seen wide-scale, global deployment of similar technologies for enhancing irrigation agriculture productivity and protecting environmental resources.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Farm Practice Typologies as a Strategy for Management-Relevant Land Use and Land Cover Mapping in the Great Lakes Region (Version 1) [Dataset]

Dataset overview and development This dataset provides spatially explicit agricultural land-use and land-management typologies developed for the Great Lakes Region (GLR) at the farm-parcel level. The typologies were designed to characterize not only the land-use and land-cover (LULC) associated with individual agricultural farm parcels, but also the land-management practices (LMPs), including irrigation, tile drainage, and conservation easements, occurring within those parcels and how these characteristics change through time. The dataset contains four related typology products: Annual integrated typology – describes the combined LULC and land-management characteristics for each farm parcel for individual years. LULC transition typology – describes the temporal pattern of LULC change for each farm parcel across the study period (2008-2023). LMP trend typology – describes the temporal pattern in the occurrence of LMPs for each farm parcel across the study period. Multi-year integrated typology – combines the LULC transition typology and LMP trend typology to provide an integrated characterization of long-term land-use and management patterns. Purpose of the dataset The purpose of these products is to provide a management-relevant integrated and consistent framework for evaluating the spatial and temporal organization of agricultural landscapes across the GLR. The resulting typologies can: support landscape-scale environmental and land-use analysis; provide spatial information relevant to land-management strategies, conservation planning, policy development, and program evaluation; characterize spatial patterns of agricultural land use and management; examine changes in agricultural landscapes through time; and identify persistent, transitional, and changing agricultural systems. Please refer to the README file provided in Files for more details.

Agriculture↗
DOE OSTI2020

Opportunities to Implement Solutions to Achieve Remedial Action Objectives in Consideration of Stakeholder Interests - 20365

A case study in the implementation of a soils excavation and removal project conducted at a Formerly Utilized Sites Remedial Action Program (FUSRAP) Maywood Superfund Site (FMSS) vicinity property; an active commercial business, in a densely populated area, with significant operational, technical and, logistical constraints that were expected to limit areas that could be remediated. The United States Army Corps of Engineers-led (USACE) team successfully navigated complex overlapping stakeholder interests to achieve a more efficient and complete removal of contaminated soils and debris while minimizing unnecessary excess costs to the Government. This paper centers on FUSRAP activities at the FMSS vicinity property located at 149-151 Maywood Avenue, Maywood, Bergen County, New Jersey. For most of its FUSRAP history, this ∼109,000 square meter (27-acre) property housed a now-demolished ∼26,000 square meter (6.5-acre) warehouse operated by Sears Logistics Services, a unit of the Sears Roebuck Company (Figure 2). Sears ended its property lease and vacated the warehouse in December 2016. Given that long history and for the purposes of this paper, the property will be referred to as the 'Sears property' or simply 'the property.' The Sears property is approximately 109,000 square meters (27-acres) and is currently zoned for commercial use. The property is bound to the north and northwest by 100 West Hunter Avenue (the Stepan Company), to the northeast by 205 Maywood Avenue, to the east by Maywood Avenue, to the south by 23 West Howcroft Road, and to the west by businesses on NJ Route 17 and the NJ Route 17 roadway. Until December 2016, the property housed a warehouse and distribution center operated by Sears Logistical Services. On-site structures were demolished by the property owner in 2017. The warehouse covered the north section of the property along the Stepan Company property line. A railroad spur from the adjacent property now known as the Maywood Interim Storage Site (MISS) ended at the northeast corner of the warehouse. Wetlands were located east of the warehouse; the rest of the property was covered with paved parking lots and grassed areas. During remediation at the property, opportunities frequently arose where the project team was able to coordinate effectively with stakeholders to sequence remediation activities to facilitate removal of otherwise inaccessible soils and identify opportunities for materials reuse when supported by residual radiological and chemical levels. Some specific opportunities include: - remediating individual truck loading dock bays to maintain tenant operations; - working along a busy highway and in a utility corridor containing a 30-inch high pressure gas main; - remediating Lodi Brook and associated wetlands requiring bypass pumping and other diversionary structures to maintain local community stormwater drainage; - protecting during remediation and supporting access to facilitate tenant/owner maintenance of critical fire protection and water supply system service lines buried in contaminated soils and necessary for safe warehouse operations; and - coordinating with stakeholders to ensure non-radiological contaminants of concern for the site (unaffiliated with FUSRAP) were addressed by the responsible party in a manner that maximized benefit to all parties while supporting an efficient overall site remediation program. Once the property was vacant and the warehouse structure and radiologically non-impacted above-grade structures were demolished, the project identified an opportunity to significantly reduce the volume of waste associated with the foundation of the former warehouse, a foundation suspected of being partially constructed in radiologically contaminated soils. The project developed and implemented supplemental radiological verification survey and sampling strategies based on radiological cross-contamination risk potential with process flow-charts and screening-level based decision points; a program that classified saw-cut sections of concrete based on observed residual surface radioactivity conditions using a combination of gamma sensitive sodium-iodide scans and beta sensitive Geiger-Muller direct measurements. The proposed approach was reviewed with stakeholders with feedback, including consideration of applicable State of New Jersey Site Remediation Program criteria and guidance before implementation. Once classified, additional sampling was performed at frequencies driven by screening. The sampling methods, stockpile sampling frequencies, criteria and, approach to data evaluation were developed in consideration of existing site cleanup standards, regional background ranges, State of New Jersey radiological remediation program guidance, and specific stakeholder input With the property remediation and survey efforts nearly completed, it is relevant to examine retrospectively the objectives, assumptions and limitations in the remedial design (i.e., what was planned) versus what was able to be accomplished through effective teaming. Benefits to other environmental remediation site programs include better understanding of how to work effectively with stakeholders to achieve win-win outcomes, and approaches to site remediation, waste minimization and materials reuse that were successful in their overall outcomes. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

A Dose Assessment Model for Radioactive Waste Exposed by Gully Erosion at West Valley - 20513

The Western New York Nuclear Service Center (WNYNSC), located approximately 48 km south of Buffalo, New York, is the site of a former nuclear fuel reprocessing and radioactive waste disposal facility. Spent nuclear fuel was processed there from 1966 to 1972, leaving behind radioactive and chemical wastes in two disposal areas and a waste tank farm. Site operations also resulted in releases of radioactivity to site soils, groundwater, and to surface waters draining the site. The New York State Energy Research and Development Authority (NYSERDA) and the U.S. Department of Energy (DOE) are collaborating in a process of decision making for decommissioning those facilities remaining at the WNYNSC following the completion of Phase 1 decommissioning. Neptune and Company, Inc. (Neptune) was contracted to develop a probabilistic performance assessment (PPA) computer model to assist the agencies in this process. The PPA Model includes a contaminant transport component focusing on the movement of contaminants within and among environmental media including groundwater and surface water transport, contaminant translocation by plants and animals, diffusion, and erosion. The model also includes evaluation of potential exposure and health effects for a Resident Farmer exposure scenario, where the Resident Farmer represents a critical group, described as that group of individuals reasonably expected to receive the greatest exposure to residual radioactivity for any applicable set of circumstances. The West Valley Site is located in the glaciated Allegheny Plateau region of western New York State. The waste reprocessing and disposal areas were constructed on a relatively fat area of plateau dissected by drainages of Buttermilk Creek, including Erdman Brook, Franks Creek, and Quarry Creek. An important aspect of the contaminant transport component of the PPA model is consideration of erosive processes such as slumping of the stream slopes and the advance of gullies from these streams. These erosion processes remove material from the plateau, growing the size of the creek valleys and making them wider and deeper. Of particular interest for the impact of erosion is radioactive waste contained in the Nuclear Regulatory Commission (NRC)-Licensed Disposal Area (NDA), the New York State-Licensed Disposal Area (SDA), and residual radiological inventory in the underground storage tanks at the Waste Tank Farm (WTF). The PPA Model is organized around geographically-defined facilities which were constructed upon the plateau, including the NDA, SDA, and WTF. Ongoing stream erosion processes will potentially transfer radioactive waste and residual inventory from these facilities to the ground surface on adjacent hillslope areas where erosion has breached the facility. Hence, it is important to evaluate the consequences of potential exposures to a Resident Farmer on the hillslopes below a breached facility. Two interrelated aspects of the dose assessment model related to hillslope exposure are discussed: 1) representation of the physical processes related to transport of radionuclides from facilities onto the hillslopes, and from the hillslopes into adjoining creeks where contaminated material migrates downstream with surface water and sediment, and; 2) adaptation of the activities associated with the Resident Farmer scenario to assess potential exposures to contamination in the hillslope areas. This discussion will cover the conceptual basis of the hillslope exposure and transport models, and also implementation in the PPA computer model. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Rapid changes in agricultural land use and hydrology in the Driftless Region

Annual cropping systems are common in the Driftless Region of the U.S. Midwest, but soil degradation is prone to happen in such systems due to the rugged topography of the region. Recent rapid increases in row crop area have been noted in this region, with annual precipitation and hydrologic extremes on the rise in recent decades. The aim of this research to use geospatial datasets and tools in order to assess the regional trends in land use, precipitation, and hydrologic change and quantify the relationship between these environmental trends. Between 2006 and 2017, substantial row crop expansion of 10,000 ha or more was common across HUC 8 (Hydrologic Unit Code 8) watersheds in our study area. Expansion occurred mainly on steeper slopes, converting existing grasslands or alfalfa (Medicago sativa L.) to row crops. Classifying land as planted (in row crops), plantable (in row crops or could be converted), and unplantable (unable to be converted) revealed that Driftless Region watersheds have ~30–50% of plantable land available for future expansion. Annual precipitation was highly variable during this time period but had a general increasing trend. On average, precipitation showed higher correlation to streamflow compared to row crop expansion across 27 USGS river gage drainage basins in our study area. However, when the increase in row crop area was significant and was accompanied by increasing precipitation, stronger correlation between row crop area and annual streamflow was exhibited. This finding suggests that row crop expansion acts to enhance the effects of increasing precipitation on local hydrology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Discretization limits of lattice‐Boltzmann methods for studying immiscible two‐phase flow in porous media

Summary Digital images of porous media often include features approaching the image resolution length scale. The behavior of numerical methods at low resolution is therefore important even for well‐resolved systems. We study the behavior of the Shan‐Chen (SC) and Rothman‐Keller (RK) multicomponent lattice‐Boltzmann models in situations where the fluid‐fluid interfacial radius of curvature and/or the feature size of the medium approaches the discrete unit size of the computational grid. Various simple, small‐scale test geometries are considered, and a drainage test is also performed in a Bentheimer sandstone sample. We find that both RK and SC models show very high ultimate limits: in ideal conditions the models can simulate static fluid configuration with acceptable accuracy in tubes as small as three lattice units across for RK model (six lattice units for SC model) and with an interfacial radius of curvature of two lattice units for RK and SC models. However, the stability of the models is affected when operating in these extreme discrete limits: in certain circumstances the models exhibit behaviors ranging from loss of accuracy to numerical instability. We discuss the circumstances where these behaviors occur and the ramifications for larger‐scale fluid displacement simulations in porous media, along with strategies to mitigate the most severe effects. Overall we find that the RK model, with modern enhancements, exhibits fewer instabilities and is more suitable for systems of low fluid‐fluid miscibility. The shortcomings of the SC model seem to arise predominantly from the high, strongly pressure‐dependent miscibility of the two fluid components.

Li, Zhe↗
DOE OSTI2023

Inadvertent Hatchery Rainbow Trout Oncorhynchus mykiss Discovered in Native Westslope Cutthroat Trout Oncorhynchus clarkii lewisi Habitat: A Cautionary Tale

Abstract Fish hatcheries across North America release billions of fish into the wild every year to augment harvest opportunities in sport, commercial, and tribal fisheries, as well as to recover depressed populations. Despite these benefits, wild fish populations may be negatively affected when hatchery fish compete and/or hybridize with native species. Native Westslope Cutthroat Trout Oncorhynchus clarkii lewisi have decreased by 90% across their historic range; however, the Flathead River in Montana is a rangewide stronghold for these imperiled fish. The primary threat to Westslope Cutthroat Trout is hybridization with invasive Rainbow Trout O. mykiss, which leads to hybrid swarm formation and genomic extinction. We collected Rainbow Trout in Mill Creek, a tributary of the Flathead River, downstream from a hatchery that produces the species, and used otolith 87Sr/86Sr to determine whether individual fish were inadvertently introduced from the hatchery. Differences in 87Sr/86Sr among water samples from Mill Creek and the marine-derived hatchery food provided high-classification accuracy to determine the natal origins of Mill Creek Rainbow Trout. We found that 83 of the 106 Rainbow Trout collected (78%) were of hatchery origin. Otolith microstructure analysis indicated these fish had been in Mill Creek for ~1–32 weeks prior to capture. Our results illustrate the utility of otolith 87Sr/86Sr to identify hatchery fish in natural habitats and point to a source of invasive Rainbow Trout that pose conservation risks to native fishes in the drainage.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

How profitable is switchgrass in Illinois, USA? An economic definition of marginal land

Decisions regarding the conversion of land from an existing crop to bioenergy crops are critical for the sustainable production of both food and fuels. This study seeks to establish criteria for delineating land as “economically marginal”, and thus suited for growing switchgrass. In this case study of an Illinois agricultural field, the profitability of switchgrass, with farmgate prices of $\$44$ Mg –1 , $\$66$ Mg –1 , or $\$88$ Mg –1 , was compared to corn and soybean crop prices. Further, the study also evaluates the profitability of switchgrass when replacing corn-based yield estimates from the Soil Productivity Index (SPI) of Illinois. Based on a dry-matter yield of 10.45 Mg ha –1 , switchgrass can compete with soybeans only at the high price of $\$88$ Mg –1 , but depending on location, can compete with corn at $\$66$ Mg –1 . Across Illinois, at $\$88$ ha –1 , all Illinois land with SPI < 100% and 95% of land under SPI class C (SPI 100–116) is profitable under switchgrass. Switchgrass may not be profitable relative to corn grown in the SPI class A (SPI > 133) and only 7% of class B (SPI 117–132). Our results show that land with drainage and erosion limitations is economically marginal when corn and soybean yields are low, and the farmgate price for switchgrass is greater than $\$66$ Mg –1 . However, this may not be possible on land where switchgrass is replacing frequent soybean rotations (corn–soybean ratio ≤ 1). Land used to produce only soybeans may only be marginal at the farmgate price of $\$88$ Mg –1 . Further studies need to be conducted to identify how much land can be converted to switchgrass without harming corn production.

09 BIOMASS FUELS↗