Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffusion coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Limits on dark matter annihilation from the shape of radio emission in M31

Well-motivated models of dark matter often result in a population of electrons and positrons within galaxies produced through dark matter annihilation — usually in association with gamma rays. As they diffuse through galactic magnetic fields, these e ± produce synchrotron radio emission. The intensity and morphology of this signal depends on the properties of the interstellar medium through which the e ± propagate. Using observations of the Andromeda Galaxy (M31) to construct a model of the gas, magnetic fields, and starlight, we set constraints on dark matter annihilation to b$\overline{b}$ using the morphology of 3.6 cm radio emission. As the emission signal at the center of M31 is very sensitive to the diffusion coefficient and dark matter profile, we base our limits on the differential flux in the region between 0.9 – 6.9 kpc from the center. We exclude annihilation cross sections ≳ 3 × 10 −25 cm 3 /s in the mass range 10 – 500 GeV, with a maximum sensitivity of 7 × 10 −26 cm 3 /s at 20 – 40 GeV. Though these limits are weaker than those found in previous studies of M31, they are robust to variations of the diffusion coefficient.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Characteristics and mathematical modeling of apple slice drying in an electrohydrodynamic system with a needle‐plate electrode

Abstract The drying of apple slices in an electrohydrodynamic (EHD) system with a needle‐plate electrode was characterized and mathematically modeled at voltages of 30, 40, and 50 kV and with distances between needles of 5, 6, and 7 cm. The results showed that the drying rate, effective water diffusion coefficient, and rehydration ratio of the apple slices, and specific energy consumption of drying, all increased with increasing voltage. Initially, there was a period when the drying rate was approximately constant in the low‐voltage EHD, but not in the high voltage conditions. At the same voltage, the drying rate was highest when the distance between needles was 6 cm. The voltage and distance between needles had a significant ( p < .05) interactive effect on the effective water diffusion coefficient and specific energy consumption, but not on the rehydration ratio. General mathematical models for drying can be used to represent the drying behavior of apple slices. The Midilli and Kucuk model and the Logarithmic model had the best fits, with correlation coefficients of 0.998803 and 0.998267, respectively. Predictive functions for the moisture ratio of apple slices based on voltage and distance between needles were established and verified. The results indicated that the Logarithmic model could more accurately predict the moisture ratio of apple slices dried using the EHD method. Practical Applications As a new drying technology, electrohydrodynamic (EHD) drying has unequaled advantages. According to the results, using the appropriate voltage and distance between needles improves not only drying efficiency, but also the rehydration ratio of apple slices, which reflects the quality of dried products. The Logarithmic model can accurately predict the EHD drying behavior of apple slices, which is of great significance in optimizing actual production.

Li, Bowen↗
DOE OSTI2026

Mass dependence of overshooting beneath convective envelopes

State of the art stellar evolution codes [Paxton et al., 2010, Demarque et al., 2004, Weiss and Schlattl, 2008, Siess et al., 2013, Christensen-Dalsgaard, 2008] evoke a diffusive process to model convective overshooting. The diffusion coefficient [Freytag et al., 1996, Pratt et al., 2017] used in the model can be set to change with the classification of the convective zone as non-burning, H-burning, He-burning, or metal-burning. It can also be set to change at defined evolutionary points, such as the bottom of the asymptotic giant branch, or during the third dredge up [Herwig, 2000, Lugaro et al., 2003]. Aside from these abrupt changes, the diffusion coefficient is typically locked to a percentage of the pressure scale height measured at the convective boundary. However, there is no theoretical reason for convective overshooting, or indeed other convective properties, to change in the same way that the pressure scale height changes as a star evolves.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Low-Temperature Characterization of a Nonaqueous Liquid Electrolyte for Lithium Batteries

Rechargeable batteries exhibit poor performance at low temperatures due to sluggish ion transport through the electrolytic phase. Ion transport is governed by three transport parameters—conductivity, diffusion coefficient, and the cation transference number with respect to the solvent velocity—and the thermodynamic factor. Understanding how these parameters change with temperature is necessary for designing improved electrolytes. In this work, we combine electrochemical techniques with electrophoretic NMR to determine the temperature dependence of these parameters for a liquid electrolyte, LiTFSI salt dissolved in tetraglyme between −20 and 45 °C. At colder temperatures, all species in the electrolyte tend to move more slowly due to increasing viscosity, which translates to a monotonic decrease in conductivity and diffusion coefficient with decreasing temperature. Surprisingly, we find that the field-induced velocity of solvent molecules at a particular salt concentration is a nonmonotonic function of temperature. The cation transference number with respect to the solvent velocity thus exhibits a complex dependence on temperature and salt concentration. The measured thermodynamic and transport properties are used to predict concentration gradients that will form in a lithium-lithium symmetric cell under a constant applied potential as a function of temperature using concentrated solution theory. The calculated steady current at −20 °C is lower than that at 45 °C by roughly two orders of magnitude.

25 ENERGY STORAGE↗
DOE OSTI2020

The Role of Demixing and Crystallization Kinetics on the Stability of Non‐Fullerene Organic Solar Cells

Abstract With power conversion efficiency now over 17%, a long operational lifetime is essential for the successful application of organic solar cells. However, most non‐fullerene acceptors can crystallize and destroy devices, yet the fundamental underlying thermodynamic and kinetic aspects of acceptor crystallization have received limited attention. Here, room‐temperature (RT) diffusion coefficients of 3.4 × 10 −23 and 2.0 × 10 −22 are measured for ITIC‐2Cl and ITIC‐2F, two state‐of‐the‐art non‐fullerene acceptors. The low coefficients are enough to provide for kinetic stabilization of the morphology against demixing at RT. Additionally profound differences in crystallization characteristics are discovered between ITIC‐2F and ITIC‐2Cl. The differences as observed by secondary‐ion mass spectrometry, differential scanning calorimetry (DSC), grazing‐incidence wide‐angle X‐ray scattering, and microscopy can be related directly to device degradation and are attributed to the significantly different nucleation and growth rates, with a difference in the growth rate of a factor of 12 at RT. ITIC‐4F and ITIC‐4Cl exhibit similar characteristics. The results reveal the importance of diffusion coefficients and melting enthalpies in controlling the growth rates, and that differences in halogenation can drastically change crystallization kinetics and device stability. It is furthermore delineated how low nucleation density and large growth rates can be inferred from DSC and microscopy experiments which could be used to guide molecular design for stability.

Hu, Huawei↗
DOE OSTI2025

Rapid Bayesian High Entropy Alloy Designs Fabricated via Wire Arc Additive Manufacturing

Purpose: This project seeks to demonstrate a new high-throughput (rapid) alloy design technique applied to creating new high entropy alloys (HEAs) for extreme environments. High entropy alloys shift the design paradigm from being focused on a single principal element (e.g. nickel-based alloys) to target alloys that include high atomic fractions (X >10%) of multiple elements. These HEA materials can exhibit sluggish diffusion and enhanced corrosion resistance, ideal for potential applications in advanced ultra supercritical (A-USC) steam cycles for power generation. Scope: The addition of multiple elements in high atomic fractions creates an enormous design space that cannot easily be investigated by traditional material design strategies such as designed of experiments (DOE). This project utilizes a Bayesian machine learning algorithm that has been modified to work with calculation of phase diagrams (CALPHAD) software. This Bayesian algorithm reduces manual inputs and increase the likelihood of achieving an optimal solution. Compositional inputs to this algorithm will be assessed using existing material property models for high temperature strength and corrosion resistance. The target for alloy performance will be a 15% (~100 ⁰C) increase in allowable service temperature beyond heat-resistant stainless steels while maintaining or improving alloy cost and corrosion resistance. Haynes 230 was selected as a baseline, which is 57 wt% Ni with 22 wt% Cr 14 wt% W, and 2 wt% Mo as solid solution strengtheners. In addition to rapid design via Bayesian machine learning, the alloys were rapidly fabricated using a multi-wire arc additive manufacturing (mWAAM) technique which allows for precise control of alloy composition and assessing of alloy design “windows” to study composition effects. Build speeds for wire-arc additive processes are among the highest for additive technologies enabling rapid and reliable sample fabrication when compared to conventional methods such as arc button melting. The mWAAM samples will be rapidly characterized via instrumented indentation for room temperature modulus and strength and for elevated temperature strength via hot hardness tests. After being screened with hardness testing, potential alloys will be further evaluated with conventional microscopy techniques including scanning electron microscopy (SEM) and transmission electron microscopy (TEM) to assess agreement with modeling results. The most promising compositions will also be evaluated by printing full sized tensile specimens for mechanical behavior tests at elevated temperatures. Results: Bayesian machine learning of a single performance function was initially used to optimize five performance metrics: 1) single phase stability, 2) yield strength, 3) creep resistance (low diffusion coefficient), 4) freezing range (weldability), and 5) material cost. The single performance function was suboptimal as assumptions had to be made about the results while formulating the optimization. A goal-oriented Bayesian optimization strategy (Hanaoka, 2021) was implemented with CALPHAD for use with the five metrics above. This multi-objective Bayesian optimization (MOBO) enabled the design of NiCrCoFe alloys with V and W additions. A base composition of NiCoCr was selected as Ni provides a stable FCC matrix, Cr aids corrosion/oxidation resistance, and Co is a solid-solutions strengthener that also improves creep by increasing the activation energy. Fe helps reduce diffusion coefficients and cost. Finally, V and W were selected for their reasonable solubility and high atomic misfit to aid in solid solution strengthening. Cracking of the mWAAM specimens was an early issue, and the Easton solidification cracking model (Easton et al., 2014a) was selected for addition to the MOBO function. High performing alloys fabricated by mWAAM included Ni 28 Cr 25 Co 26 Fe 15 V 8 and Ni 62 Cr 18 Co 1 Fe 3 W 15 . It was observed that even after adapting the mWAAM process for W, the W did not fully dissolve. To fully evaluate the Ni 62 Cr 18 Co 1 Fe 3 W 15 composition, a cored wire (80-20 NiCr sheath/powder core) was manufactured and printed via WAAM, and HIP’ing was utilized to homogenize and densify the printed alloy. The V and W alloys produced met metrics 1 (solid solution), 4 (solidification cracking), and 5 (cost). However, an unmodeled mechanism of thermal stress cracking was identified in the WAAM produced materials, perhaps exacerbated by the lack of grain boundary strengthening elements (B, C). Conclusions & Recommendations: A high-throughput (rapid) alloy design technique was applied to designing and manufacturing new high entropy alloys (HEAs) for extreme environments utilizing MOBO and mWAAM. The developed process was rapid and effective in addressing the mechanisms included in the model. The lack of grain boundary strengthening element additions (e.g., B, C) was a simplification that likely produced thermal stress cracking that turned into a large part of the investigation. Additions on the order of 0.005 wt% B and 0.05 wt% C likely would have minimized thermal stress grain boundary cracking. Overall, the high throughput design strategy is promising for rapid design of metrics-driven alloys for advanced ultra supercritical (A-USC) steam cycles for power generation. The MOBO and mWAAM process could be commercialized to accelerate metrics-driven alloy design. In addition, the cored-wire process utilized for scale-up is a promising high-volume process for WAAM alloy development and scale-up.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Complete quasilinear model for the acceleration-driven lower hybrid drift instability and a computational assessment of its validity

A complete quasilinear model is derived for the electrostatic acceleration-driven lower hybrid drift instability in a uniform two-species low-beta plasma in which current is perpendicular to the background magnetic field. The model consists of coupled nonlinear velocity space diffusion equations for the volume-averaged ion and electron distribution functions. Each species' diffusion coefficient depends on a time-evolving spectral density of the electric-field energy per unit volume and a time-evolving dispersion relation. The dispersion relation is expressed analytically in integral form without the use of asymptotic limits and applies to arbitrary distribution functions, so long as they can be expressed as a function of one velocity coordinate, e.g., f⁡(vy) or f⁡(v⊥). The quasilinear model conserves energy and is complete in that it fully describes the evolution of the distribution functions, including resonant and nonresonant particle-wave interactions, while accounting for distribution-function-dependent mixed-complex frequencies. Further, the quasilinear diffusion model is solved numerically and self-consistently using a Crank-Nicolson temporal discretization and a second-order finite-volume velocity-space discretization. Numerical solutions are compared to nonlinear fourth-order accurate continuum kinetic Vlasov-Poisson simulations. Evolution of electric-field energy, growth rates, distribution functions, and diffusion coefficients are shown to be in agreement with Vlasov simulations. The quasilinear model is shown to predict anomalous transport terms, like resistivity and heating, to within a factor of order unity. Discrepancies between the quasilinear model and Vlasov simulations are assessed and attributed primarily to lack of damping in the quasilinear description and to the use of unperturbed-orbit susceptibilities in the linear theory dispersion relation. The results illuminate the predictive accuracy of the quasilinear model, place approximate bounds on its validity, and provide much needed vetting of quasilinear theory's ability to predict the nonlinear state of a microturbulent plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Physics-Informed Generative Adversarial Networks for Stochastic Differential Equations

We developed a new class of physics-informed generative adversarial networks (PI-GANs) to solve forward, inverse, and mixed stochastic problems in a unified manner based on a limited number of scattered measurements. Unlike standard GANs relying solely on data for training, here we encoded into the architecture of GANs the governing physical laws in the form of stochastic differential equations (SDEs) using automatic differentiation. In particular, we applied Wasserstein GANs with gradient penalty (WGAN-GP) for its enhanced stability compared to vanilla GANs. We first tested WGAN-GP in approximating Gaussian processes of different correlation lengths based on data realizations collected from simultaneous reads at sparsely placed sensors. We obtained good approximation of the generated stochastic processes to the target ones even if there is a mismatch between the input noise dimensionality and the effective dimensionality of the target stochastic processes. We also studied the overfitting issue for both the discriminator and the generator, and we found that overfitting occurs also in the generator in addition to the discriminator as previously reported. Subsequently, we considered the solution of elliptic SDEs requiring approximations of three stochastic processes, namely the solution, the forcing, and the diffusion coefficient. Here again, we assumed data collected from simultaneous reads at a limited number of sensors for the multiple stochastic processes. Furthermore, three generators were used for the PI-GANs: two of them were feed forward deep neural networks (DNNs), while the other one was the neural network induced by the SDE. For the case where we have one group of data, we employed one feed forward DNN as the discriminator, while for the case of multiple groups of data we employed multiple discriminators in PI-GANs. We solved forward, inverse, and mixed problems without changing the framework of PI-GANs, obtaining both the means and the standard deviations of the stochastic solution and the diffusion coefficient in good agreement with benchmarks. In this work, we have demonstrated the effectiveness of PI-GANs in solving SDEs for about 120 dimensions. In principle, PI-GANs could tackle very high dimensional problems given more sensor data with low-polynomial growth in computational cost.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Modeling turbulent impurity transport in the SOL of DIII-D with a reduced model

A novel impurity transport model that approximates SOL turbulence as a fluctuating poloidal electric field is shown to be an acceptable replacement for the traditional approach of assigning an arbitrary radial diffusion coefficient to the impurity ions. The model is implemented in the DIVIMP impurity transport code and applied to an L-Mode tungsten divertor experiment on DIII-D. The poloidal electric field is represented as fluctuating between ±1000 V m –1 based on previous measurements. The resulting intermittent v r = E θ × B T transport causes ions to transport both into the core as well as into the far-SOL. Simultaneous agreement with estimates of the W density just inside the separatrix as well as in the far-SOL is obtained (n W ~ 10 14 m –3 and n W ~ 10 12 m –3 , respectively). Prompt re-deposition of the W ions was necessary to obtain agreement (f redep ~ 99%). Here, we conclude that simulating impurity transport using a physics-based approximation for turbulence in the SOL, versus arbitrarily assigning diffusion coefficients, may enable better reactor scale predictions of core impurity contamination.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Accurate and scalable graph neural network force field and molecular dynamics with direct force architecture

Abstract Recently, machine learning (ML) has been used to address the computational cost that has been limiting ab initio molecular dynamics (AIMD). Here, we present GNNFF, a graph neural network framework to directly predict atomic forces from automatically extracted features of the local atomic environment that are translationally-invariant, but rotationally-covariant to the coordinate of the atoms. We demonstrate that GNNFF not only achieves high performance in terms of force prediction accuracy and computational speed on various materials systems, but also accurately predicts the forces of a large MD system after being trained on forces obtained from a smaller system. Finally, we use our framework to perform an MD simulation of Li 7 P 3 S 11 , a superionic conductor, and show that resulting Li diffusion coefficient is within 14% of that obtained directly from AIMD. The high performance exhibited by GNNFF can be easily generalized to study atomistic level dynamics of other material systems.

Chemistry↗
DOE OSTI2021

Electrochemical Study on the Kinetic Properties of Fe 2+ /Fe, Ni 2+ /Ni, Cr 2+ /Cr and Cr 3+ /Cr 2+ in Molten MgCl 2 -KCl-NaCl Salts

Here, the fundamental kinetic parameters of corrosion product ions (Fe, Ni and Cr ions) are of significant importance to understand the corrosion mechanisms of the structural materials in the molten salts. In the present study, the fundamental data of Fe 2+ , Ni 2+ , Cr 2+ and Cr 3+ (diffusion coefficient D, exchange current density i 0 , charge transfer coefficient α, limiting current density i L and standard rate constant k0) were measured at different concentrations (1.53 × 10 –6 –7.48 × 10 –4 mol cm –3 ) and temperatures (600 °C–800 °C). The values of D are independent of concentrations and follow Arrhenius law with temperature, which descend in the order of D Cr 2+ > D Fe 2+ > D Cr 3+ > D Ni 2+ with values ranging from 0.94 × 10 –5 to 3.31 × 10 –5 cm 2 s –1 . Both i 0 and k 0 depend on the temperatures, which also follow Arrhenius law.

14 SOLAR ENERGY↗
DOE OSTI2021

Particle Size Distribution Dynamics Can Help Constrain the Phase State of Secondary Organic Aerosol

Particle phase state is a property of atmospheric aerosols that has important implications for the formation, evolution, and gas/particle partitioning of secondary organic aerosol (SOA). In this work, we use a size-resolved chemistry and microphysics model (SOM-TOMAS), updated to include an explicit treatment of particle phase state, to constrain the bulk diffusion coefficient (Db) of SOA produced from ??- pinene ozonolysis. By leveraging data from laboratory experiments performed in the absence of a seed and under dry conditions, we find that the Db for SOA can be constrained (1-7 ×10-15 cm2 s-1 in these experiments) by simultaneously reproducing the time-varying SOA mass concentrations and the evolution of the particle size distribution. Another version of our model that used the predicted SOA composition to calculate the glass transition temperature, viscosity, and, ultimately, Db (~10-15 cm2 s-1) of the SOA was able to reproduce the mass and size distribution measurements when we included oligomer formation (oligomers accounted for about a fifth of the SOA mass). Our work highlights the potential of a size resolved SOA model to constrain the particle phase state of SOA by utilizing historical measurements of the evolution of the particle size distribution.

He, Yicong↗
DOE OSTI2025

MOSCATO Development and Integration in Fiscal Year 2025: Implementation of Multiphase, Multiphysics Modeling Capabilities for Molten Salt Systems

MOSCATO (Molten Salt Chemistry and Transport) is a multiphysics code that provides high-fidelity, coupled simulations of fluid flow, heat transfer, mass transfer, chemistry, electrochemical phenomena, and alloy corrosion for molten salt systems. In FY25, significant developments were made to the code package, enhancing its capabilities for modeling all relevant phenomena within operating moltens salt reactors (MSRs). The developments and activities in FY25 included: 1. Implementation of Level-Set methods to enable modeling of single-bubble behavior in molten salts. In FY25, the Level-Set two-phase flow modeling implementation was improved to simulate single bubble behavior with molten salt media. The large density and viscosity ratios between typical gases and molten salt liquids present challenges for these types of numerical solvers. With enhancements to the pressure projection method, MOSCATO’s Level-Set solver was able to be successfully validated to experiments related to helium bubble rise in stagnant molten salt. The simulated bubble rising velocity showed reasonable good agreement with experimental measurements. The bubble shape and dynamics were also visually compared with experimental snapshots, demonstrating a good qualitative match. 2. Generation of mass transfer correlations for multiphase flow systems. To enable calculations of the tritium transport across the interface between gas bubbles and salt, we modeled high- Schmidt-number mass transfer around a sphere across a broad range of Reynolds numbers. The mesh near the sphere surface was highly refined to resolve steep concentration gradients caused by the low diffusion coefficient. Literature-based mass transfer correlations were compared with the numerical results, and modifications were proposed to improve agreement, particularly at higher Schmidt numbers. These mass transfer correlations were subsequently provided to other national laboratories to help enable high quality mass transfer simulations using lower-order solvers under development within the NEAMS program. 3. Preliminary implementation of a bubbly flow solver. To model bubbly flow in molten salt, we implemented a bubbly flow solver for void fractions less than 5%. To do so, an algebraic relative velocity model that assumes small bubbles with rapid momentum equilibration was added to MOSCATO to compute bubble velocities. Preliminary comparisons with experimental data showed reasonable agreement, and further improvements are underway. 4. Generation of mass transfer correlations for MSRE subchannel The Molten-Salt Reactor Experiment (MSRE) was a landmark historical project that demonstrated the feasibility of molten-salt reactor technology. The MSRE campaign also generated a significant body of experimental data and reports that continue to support molten-salt–related research. In this report, the MSRE core subchannel was used as the reference geometry for a mass transfer study performed with MOSCATO. The geometry and computational mesh were adapted from a previous study, providing adequate resolution for the relatively low Reynolds number in this case. Additional mesh refinement was applied to reach higher Schmidt numbers, enabling the derivation of a reliable mass-transfer correlation for the present scenario. 5. Simulations of oxygen ingressions into molten salt. In the previous fiscal year, we initiated a study to simulate oxygen ingression in stagnant salt. As oxygen enters the salt through its surface, it reacts with Ce 3+ to form solid CeO 2 and other reaction products. To more fully capture the complex diffusion-convection-reaction mechanisms, capabilities for modeling natural convection in the salt vessel were added. These were needed as the flow of the ingressed gas induced flow in the salt caused by surface shear and non-isothermal effects. With these updated physics in place, we were able to successfully reproduce the experimental results for the rate of change of CeCl 3 concentrations versus time. 6. Flow corrosion model validation. In FY24, MOSCATO’s corrosion model was validated against static corrosion experiments. In FY25, this work was extended to a flow corrosion experiment, where FLiNaK salt was driven by natural convection, with initial salt impurities to initiate corrosion. Despite uncertainties in parameters such as elemental diffusion coefficients in the alloy and unknown H + concentrations, the simulations achieved good agreement with experimental results, especially in predicting sample mass losses.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

NETL Electrical Conductivity Relaxation(ECR) Analysis Tool

This application was developed within the solid oxide fuel cell (SOFC) work plan. It calculates the oxygen surface exchange coefficient (k) and oxygen diffusion coefficient (D) for an oxide sample using electrical conductivity relaxation (ECR) data. The tool also produces a heat map showing the associated uncertainty in fitting the ECR data for given pairs of k and D values, so the user can determine the most likely range of k and D values for the tested values. Multiple datasets for the same material can be plotted to decrease uncertainty. The tool can also simulate ECR curves for inputted k and D values and overlay the simulated curves with experimental data for comparison.

electrical conductivity relaxation↗
DOE OSTI2024

HTO and selenate diffusion through compacted Na-, Na–Ca-, and Ca-montmorillonite

Radionuclide transport in smectite clay barrier systems used for nuclear waste disposal is controlled by diffusion, with adsorption significantly retarding transport rates. While a relatively minor component of spent nuclear fuel, 79 Se is a major driver of the safety case for spent fuel disposal due to its long half-life (3.3×10 5 yr) and its low adsorption to clay (K D < 10 L/kg), thus a thorough understanding of Se diffusion through clay is critical for understanding the long-term safety of spent fuel disposal systems. Through-diffusion experiments with tritiated water (HTO, conservative tracer) and Se(VI) were conducted with a well-characterized, purified montmorillonite source clay (SWy-2) under a constant ionic strength (0.1 M) and three different electrolyte compositions: Na + , Ca 2+ , and a Na + -Ca 2+ mixture at pH 6.5 in order to probe the effects of electrolyte composition and interlayer cation composition on clay microstructure, Se(VI) aqueous speciation, and ultimately diffusion. Further, the results were modeled using a reactive transport modeling approach to determine values of porosity (ε), D e (effective diffusion coefficient), and K D (distribution coefficient for adsorption). HTO diffusive flux was higher in Ca-montmorillonite (D e =1.68×10 -10 m 2 s -1 ) compared to Na-montmorillonite (De=7.83×10 -11 m 2 s -1 ). This increase in flux is likely due to a greater degree of clay layer stacking in the presence of Ca 2+ compared to Na + , which leads to larger inter-particle pores. Overall, the Se(VI) flux was much lower than the HTO flux due to anion exclusion, with Se(VI) flux following the order Ca (D e = 1.03×10 -11 m 2 s -1 ) > Na–Ca (D e = 2.12×10 -12 m 2 s -1 ) > Na (D e = 1.28×10 -12 m 2 s -1 ). These differences in Se(VI) flux are due to a combination of factors, including (1) larger accessible porosity in Ca-montmorillonite due to clay layer stacking and smaller electrostatic effects compared to Na-montmorillonite, (2) larger accessible porosity for neutral-charge CaSeO4 species which makes up 32% of aqueous Se(VI) in the pure Ca system, and (3) possibly higher Se(VI) adsorption for Ca-montmorillonite. Through a combination of experimental and modeling work, this study highlights the compounding effects that electrolyte and counterion compositions can have on radionuclide transport through clay. Diffusion models that neglect these effects are not transferable from laboratory experimental conditions to in situ repository conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Electrochemical properties of poly(ethylene oxide) electrolytes above the entanglement threshold

The ion transport in electrolytes depends on three transport coefficients, conductivity (κ), salt diffusion coefficient (D), and the cation transference number with respect to the solvent velocity ($t_+^0$), and the thermodynamic factor ($T_f$). Current methods for determining these parameters involve four separate experiments, and the coupled nature of the equations used to determine them generally results in large experimental uncertainty. We present data obtained from 64 independent polymer electrolytes comprising poly(ethylene oxide) (PEO) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt. The molecular weights of PEO ranged from 5 to 275 kg mol -1 ; these samples are all above the entanglement threshold. We minimize the experimental uncertainty in transport and thermodynamic measurements by exploiting the fact that ion transport in entangled polymer electrolytes should be independent of molecular weight. The dependence of $κ, D, t_+^0$, and $T_f$ as a function of salt concentration in the range 0.035 ≤ r ≤ 0.30 are presented with a 95% confidence interval, where r is the molar ratio of lithium ions to ethylene oxide monomer units. While κ, D, and $T_f$ are all positive as required by thermodynamic constraints, there is no constraint on the sign of $t_+^0$. We find that $t_+^0$ is negative in the salt concentration range of 0.093 ≤ r ≤ 0.189.

25 ENERGY STORAGE↗
DOE OSTI2021

Interfacial Effects on Transport Coefficient Measurements in Li-ion Battery Electrolytes

Development of Li + -containing electrolytes with improved transport properties requires reliable, reproducible, and ideally low volume techniques to rigorously understand ion-transport with varying composition. Precisely measuring the complete set of transport coefficients in liquid electrolytes under battery-relevant operating conditions is difficult and the reliability of these methods are sparsely described in electrolyte transport literature. In this work, we apply a potentiostatic polarization-based transport characterization approach typically used for polymer electrolytes to liquid electrolyte systems in an attempt to fully measure all transport coefficients (conductivity, total salt diffusion coefficient, thermodynamic factor and transference number) for the model system of LiPF 6 in an ethylene carbonate—ethyl methyl carbonate (EC:EMC) mixture. Using systematic timescale and statistical analyses, we find that transport coefficients measured using potentiostatic polarization of Li-Li symmetric cells exhibit strong correlation to Li electrode interfacial resistance, indicating that such methods are probing both bulk and interfacial phenomena. This reveals a major roadblock in characterizing electrolyte systems where the interfacial resistance is significantly larger than ohmic electrolyte resistance. As a result, we find that methods that rely on potentiostatic Li metal stripping/plating do not readily result in reliable liquid electrolyte transport coefficients, unlike similar methods for solid polymer electrolytes, where interfacial resistances are typically smaller than electrolyte resistances at the elevated temperatures typically of interest for such electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2021

A hybrid data–model approach to map soil thickness in mountain hillslopes

Abstract. Soil thickness plays a central role in the interactions between vegetation, soils, and topography, where it controls the retention and release of water, carbon, nitrogen, and metals. However, mapping soil thickness, here defined as the mobile regolith layer, at high spatial resolution remains challenging. Here, we develop a hybrid model that combines a process-based model and empirical relationships to estimate the spatial heterogeneity of soil thickness with fine spatial resolution (0.5 m). We apply this model to two aspects of hillslopes (southwest- and northeast-facing, respectively) in the East River watershed in Colorado. Two independent measurement methods – auger and cone penetrometer – are used to sample soil thickness at 78 locations to calibrate the local value of unconstrained parameters within the hybrid model. Sensitivity analysis using the hybrid model reveals that the diffusion coefficient used in hillslope diffusion modeling has the largest sensitivity among all input parameters. In addition, our results from both sampling and modeling show that, in general, the northeast-facing hillslope has a deeper soil layer than the southwest-facing hillslope. By comparing the soil thickness estimated between a machine-learning approach and this hybrid model, the hybrid model provides higher accuracy and requires less sampling data. Modeling results further reveal that the southwest-facing hillslope has a slightly faster surface soil erosion rate and soil production rate than the northeast-facing hillslope, which suggests that the relatively less dense vegetation cover and drier surface soils on the southwest-facing slopes influence soil properties. With seven parameters in total for calibration, this hybrid model can provide a realistic soil thickness map with a relatively small amount of sampling dataset comparing to machine-learning approach. Integrating process-based modeling and statistical analysis not only provides a thorough understanding of the fundamental mechanisms for soil thickness prediction but also integrates the strengths of both statistical approaches and process-based modeling approaches.

58 GEOSCIENCES↗