Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dendritic formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Topological magnetic hysteresis in single crystals of CeAgSb 2 ferromagnet

Closed-topology magnetic domains are usually observed in thin films and in an applied magnetic field. In this work, we report the observation of rectangular cross-section tubular ferromagnetic domains in thick single crystals of CeAgSb 2 in zero applied field. Relatively low exchange energy, small net magnetic moment, and anisotropic in-plane crystal electric fields lower the domain wall energy and allow for the formation of the closed-topology patterns. The tubular domain structure irreversibly transforms into a dendritic pattern upon cycling the magnetic field. This transition between closed and open topologies results in a ‘topological magnetic hysteresis’— the actual hysteresis in magnetization, not due to the imperfections and pinning, but due to the difference in the pattern morphology. Similar physics was suggested before in pure type-I superconductors and is believed to be a generic feature of other nonlinear single (present case), or two-phase (type-I superconductor) systems where the effects similar to demagnetization (shape-dependent macroscopic variation of properties) lead to pattern formation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Stress engineering for crack and dendrite prevention in solid electrolytes via ion implantation

Solid-state batteries represent a promising technology that offers safer and more densely packed energy storage. A primary cause of failure in solid-state cells is the penetration of metal dendrites through the solid electrolyte. Here, we report that fluorine-ion implantation can enhance the mechanical resistance of solid electrolyte Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 to dendrite propagation by inducing residual compressive stress in the subsurface of the electrolyte. Ion implantation modifies subsurface residual stress and also alters the electrolyte’s surface, resulting in multifunctional enhancement. The combined chemical and mechanical effects of ion implantation enable reversible lithium metal stripping and plating at elevated current densities while enhancing air stability and mitigating the formation of a harmful carbonate layer at the surface. This study provides new insights into a scalable dendrite-suppression strategy for designing solid-state batteries suitable for cycling at room temperature and low stack pressures.

25 ENERGY STORAGE↗
DOE OSTI2020

Development of lithium ion conducting interface between lithium metal and a lithium ion conducting ceramic using block polymers

The lithium-air (Li-air) technology developed by EDF uses an air electrode which works with an aqueous electrolyte, which prevent the use of unprotected lithium metal electrode. A Li+ ionic conductor glass ceramic is used to separate the aqueous electrolyte compartment from the negative lithium electrode. However, this glass-ceramic is not stable in contact with lithium, it is thus necessary to add a protective buffer layer. In another hand, this protection should ideally resist to lithium dendritic growth. It is in this context that this research project which has as goal the development of a protective buffer layer based on block copolymer electrolytes (BCE) between the lithium metal and the lithium ionic conductor ceramic, for lithium-air battery. In a first part, the BCE is studied in lithium-lithium symmetric cells, in order to determine their electrochemical properties such as ionic conductivity, steady state transference number, and finally their resistance to dendritic growth during cycling. Several characterization techniques were employed and especially hard X-ray micro-tomography to analyze the lithium morphology before and after cycling. For single-ion BCE, we expect to suppress dendritic growth, however, we report here for the first time, the visualization of a homogeneous growth of lithium but the formation of dense lithium objects. In another part, the composite BCE-ceramic is studied by electrochemical impedance spectroscopy (EIS). The cycling of lithium-composite-lithium symmetric cells and the analysis of the EIS measurement after each cycle permit to determine if the dendrites have cross the protective layer and are in contact with the ceramic. Besides, the quantification of the polarization loss at the interface polymer-ceramic is evaluated by polarization experiments. This contribution is found to be small.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L

In this experiment, the origin of dislocation structures in AM stainless steels was systematically investigated by controlling the effect of thermal stress through geometric constraints for the first time. Stainless steel 316L parts were produced in the form of “1D” rods, “2D” walls, and "3D" rectangular prisms to evaluate the effect of constraints to thermal expansion/shrinkage on the development of defect microstructures and to elucidate the origin of additively manufactured (AM) dislocation microstructures. Dislocation density, organization, chemical micro-segregation, precipitate structures, and misorientations were analyzed as a function of increasing constraints around solidifying material in 1D, 2D, and 3D components built using both directed energy deposition (DED) and powder-bed selective laser melting (SLM). In DED parts, the dislocation density was not dependent on local misorientations or micro-segregation patterns, but evolved from approximately ρ ⊥ = 10 12 m -2 in 1D parts to ρ ⊥ = 10 14 m -2 in 3D parts, indicating that it is primarily thermal distortions that produce AM dislocation structures. In DED 3D parts and SLM parts, dislocation densities were highest (ρ ⊥ ≈ 10 14 m -2 ) and corresponded to the formation of dislocation cells approximately 300-450 nm in diameter. Dislocation cells overlapped with dendrite micro-segregation in some but not all cases. The results illustrate that dendritic micro-segregation, precipitates, or local misorientations influence how the dislocations organize during processing, but are not responsible for producing the organized cell structures. Furthermore, this work shows that AM dislocation structures originate due to thermal distortions during printing, which are primarily dictated by constraints surrounding the melt pool and thermal cycling.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Genetic variations and their interaction with thirdhand smoke exposure on anxiety and memory in Collaborative Cross mice

Thirdhand smoke (THS) is linked to adverse health effects, but the effect of genetic variations on behavioral outcomes is poorly understood. To investigate this, we assessed anxiety- and memory-related behaviors in 820 mice from 21 strains of the genetically diverse Collaborative Cross (CC) mouse that were exposed to THS from 4 through 10 weeks of age. Anxiety was evaluated with a light/dark box assay with a previously established risk score system. Females were generally more sensitive: THS reduced anxiety risk in strains CC013, CC019, and CC051, but increased risk in CC036 and CC061, while males showed no significant effects. Memory was tested using passive avoidance: impairments were observed in both sexes in CC016 and CC019, with sex-dependent effects in CC002 and CC051. A genome-wide association study identified 2,347 SNPs associated with anxiety and 1,568 SNPs with memory, with 32 and 85 SNPs, respectively, interacting with THS exposure. Enrichment analyses revealed distinct biological processes underlying susceptibility, including axonogenesis, synapse organization, cognition, and learning and memory. KEGG pathway analysis identified distinct genetic pathways, including GTPase binding and GTPase regulatory activity, that act as critical molecular switches in the brain that regulate synaptic plasticity, dendritic spine structure, and neuronal signaling, directly influencing anxiety-like behaviors and memory formation. These findings show that THS exposure affects neurobehavioral outcomes in a sex- and genotype-dependent manner, highlighting critical gene-environment interactions and providing a foundation for mechanistic insights into THS neurotoxicity

Anxiety↗
DOE OSTI2024

Microstructural stability and mechanical properties of the as-cast and heat-treated newly developed TiNbCrTa refractory complex concentrated alloy

In this study, a TiNbCrTa refractory complex concentrated alloy (RCCA) was prepared using vacuum arc remelting. The microstructural evolution and mechanical properties of both as-cast and heat-treated RCCA samples were analyzed. Heat treatment (HT) was performed at 800–1200 °C for 1 h in a vacuum-sealed environment. These samples exhibited a formation of Cr 2 Nb and Cr 2 Ti Laves phases. A variation in elemental distribution was observed, with interdendritic (ID) regions showing higher fractions of Ti and Cr, while the dendritic regions had a greater concentration of Ta and Nb. Micro-segregation at the IDs was confirmed through energy dispersive x-ray spectroscopy mapping, which inferred the formation of Cr- and Ti-rich phases during HT at 800–1200 °C. High-temperature HT at 1200 °C for 1 h led to the evolution of the hcp omega phase. Prolonged HT at 1200 °C for 96 h resulted in the evolution of a Cr-rich Laves phase (Cr 2 Ta), which was homogeneously distributed within the microstructure, indicating an unstable microstructure. Furthermore, despite prolonged HT, a variation in the elemental distribution persisted due to the presence of dendritic and ID regions. Electron backscattered diffraction analysis revealed the presence of bcc and hcp phases in the dendritic and ID regions, respectively, of the as-cast and HTed samples. The as-cast samples demonstrated a high compressive strength of approximately 2 GPa. Micro-hardness values increased with the HT temperature up to 1000 °C. Further increases under HT conditions did not significantly reduce the microhardness value, whereas prolonged HT at 1200 °C led to an increase in the microhardness value. Overall, the newly developed TiNbCrTa RCCA exhibited high-strength behavior even after the phase transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Chloride electrolyte enabled practical zinc metal battery with a near-unity Coulombic efficiency

Rechargeable aqueous zinc batteries are finding their niche in stationary storage applications where safety, cost, scalability and carbon footprint matter most. However, harnessing this reversible two-electron redox chemistry is plagued by major technical issues, notably hydrogen evolution reaction (HER) at the zinc surface, whose impacts are often not revealed under typical measurement conditions. Here we report a concentrated electrolyte design that eliminates this parasitic reaction and enables a Coulombic efficiency (CE) of 99.95% for Zn plating/stripping measured at a low current density of 0.2 mA cm -2 . With extra chloride salts and dimethyl carbonate in concentrated ZnCl 2 electrolyte, the hybrid electrolyte with a unique chemical environment features low Hammett acidity and facilitates the in situ formation of a dual-layered solid electrolyte interphase, protecting zinc anodes from HER and dendrite growth. Benefiting from the near-unity CE, the pouch cell with a VOPO 4 ·2H 2 O cathode sustains 500 deep cycles without swelling or leaking and delivers an energy density of 100 Wh kg -1 under practical conditions. Finally, our work represents a critical step forward in accelerating the market adoption of zinc batteries as an energy storage system with higher sustainability.

25 ENERGY STORAGE↗
DOE OSTI2023

Anion modification for stable solid electrolyte interphase in anode-free lithium metal batteries

The durability of anode-free Li metal batteries is largely limited by the undesired Li plating/stripping irreversibility on the current collector due to the infinite volume change, uncontrollable Li dendrite growth, and continuous parasitic reactions between Li metal and the electrolyte. To address these challenges, the formation of a stable and robust solid electrolyte interphase (SEI) with high ionic conductivity and strong mechanical strength is critical. Here, we developed an advanced electrolyte by introducing LiNO 3 into the localized high concentration electrolyte (LHCE) with lithium bis(fluorosulfonyl)imide (LiFSI) salt, 1,2-dimethoxyethane (DME) solvent, and 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropylether (TFTE) diluent to in situ construct a LiF and Li x N y O z co-enriched passivation layer on the Cu current collector. The synergetic effect of high mechanical strength of LiF and high ionic conductivity of Li x N y O z endows the Li metal anode with a high Coulombic efficiency (CE) of 99.35%. In conclusion, in anode-free Li metal pouch cell using LiFePO 4 (LFP) as a cathode holds an exceptionally improved capacity retention under the charging/discharging rate of 1/3 C, demonstrating great promise for developing dendrite-free and safe Li metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Highly efficient interface stabilization for ambient-temperature quasi-solid-state sodium metal batteries

Solid-state sodium (Na) batteries (SSSBs) using sulfide-based solid electrolytes (SSEs) hold tremendous promise due to their high theoretical specific capacity, enhanced safety and abundant resources. However, detrimental interfacial issues between SSEs and Na metal present a major challenge to the advancement of sulfide-based SSSBs. To address interfacial issues, we demonstrate an efficient approach by incorporating an ionic liquid electrolyte ((PYR/Na)TFSI) as interlayer to stabilize the Na metal/SSE interface. The presence of the (PYR/Na)TFSI interlayer enables the formation of a stable solid electrolyte interphase (SEI) to prevent the harmful reactions and inhibit Na dendrites. Combination of ab initio molecular dynamics simulations and X-ray photoelectron spectroscopy revealed that this stable SEI is largely composed of reduced products of TFSI -, such as NaF and CF 3 . As a result, the symmetric cells exhibited stable Na plating/striping cycling for 300 h at 0.1 mA cm -2 . In addition, FeS2||Na quasi-solid-state batteries delivered an impressive specific capacity of over 300 mAh g -1 under the current density of 20 mA g -1 at room temperature. Under a higher current density (100 mA g -1 ), such batteries performed with long-term cycling stability and maintained a specific capacity of around 103 mAh g -1 after 330 cycles. This work demonstrates the novel perspective of using an ionic liquid interlayer to address interfacial issues, contributing to the advancement of high-performance SSSBs for the next-generation energy storage systems.

25 ENERGY STORAGE↗
DOE OSTI2025

Complexing Agent-Assisted Membraneless Zinc–Iodine Aqueous Batteries

A membrane is required for conventional zinc–iodine aqueous batteries, since soluble polyiodides cross over to the anode side and react with zinc metal spontaneously. Making the battery membraneless increases ion transport and reduces its cost and overall footprint. In this paper, a membraneless Zn–I 2 aqueous battery is demonstrated, employing a complexing agent, 1-butyl-1-methylpyrrolidinium iodide (MBPI), to promote the formation of I 5 – -containing, phase-separated polyiodides upon charging, to minimize self-discharge and suppress Zn dendrite growth. With an additional 0.3 M MBPI in 4 M ZnI 2 electrolyte, the membraneless battery achieved 65 cycles with >85% Coulombic efficiency, whereas the MBPI-free control failed immediately. Additionally, a volumetric capacity of 14.3 Ah L –1 was achieved, surpassing those of most membraneless batteries reported to date regardless of redox chemistry, and underscores the potential of complexing agents in simplifying the architecture of conventional Zn–I 2 flow batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

In situ formation of polymer-inorganic solid-electrolyte interphase for stable polymeric solid-state lithium-metal batteries

Composite polymer electrolytes (CPEs) for solid-state Li-metal batteries (SSLBs) still suffer from gradually increased interface resistance and unconstrained Li-dendrite growth. Herein, we addressed the challenges by designing a LiF-rich inorganic solid-electrolyte interphase (SEI) through introducing a fluoride-salt-concentrated interlayer on CPE film. The rigid but flexible CPE helps accommodate the volume change of electrodes, while the polymeric highly concentrated electrolyte (PHCE) surface-layer regulates Li-ion flux due to the formation of a stable LiF-rich SEI via anion reduction. The designed CPE-PHCE presents enhanced ionic conductivity and high oxidation stability of >5.0 V (versus Li/Li + ). Furthermore, it dramatically reduces the interfacial resistance and achieves a high critical current density of 4.5 mA cm –2 . The SSLBs, fabricated with thin CPE-PHCE membranes (<100 μm) and Co-free LiNiO 2 cathodes, exhibit exceptional electrochemical performance and long cycling stability. Lastly, this approach of SEI design can also be applied to other types of batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Interface Modifications of Lithium Metal Anode for Lithium Metal Batteries

Lithium metal batteries (LMBs) enable much higher energy density than lithium–ion batteries (LIBs) and thus hold great promise for future transportation electrification. However, the adoption of lithium metal (Li) as an anode poses serious concerns about cell safety and performance, which has been hindering LMBs from commercialization. To this end, extensive effort has been invested in understanding the underlying mechanisms theoretically and experimentally and developing technical solutions. In this review, we devote to providing a comprehensive review of the challenges, characterizations, and interfacial engineering of Li anodes in both liquid and solid LMBs. Finally, we expect that this work will stimulate new efforts and help peer researchers find new solutions for the commercialization of LMBs.

25 ENERGY STORAGE↗
DOE OSTI2021

Surface and subsurface characterization of laser-interference structured Ti6Al4V

Ti6Al4V specimens were exposed to high-energy laser pulses of 1.24 J/cm 2 fluences per pulse using a two-beam optical configuration to attain laser-interference. In addition to the formation of periodic surface textures by laser-interference, scanning electron microscope (SEM) images demonstrated several microstructural changes on the surface processed. Moreover, the surface and subsurface of Ti6Al4V specimens were characterized for the as-received and laser-interference processed conditions using x-ray photoelectron spectroscopy (XPS) and electron energy dispersive spectroscopy (EDS). The XPS data showed that this laser technique is effective at removal of surface contaminants for Ti6Al4V. The XPS analysis also revealed the formation of an oxy-nitride layer on the laser treated material. Finally, the microstructure analysis indicates that grain refinement, dendrite and twin structures were found near the surface due to laser processing.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Petaloid-shaped ZnO coated carbon felt as a controllable host to construct hierarchical Li composite anode

Prestoring Li metal into the 3D host via thermal infusion strategy has been considered as an effective approach on suppressing Li dendrites growth of Li-metal anode during cycling. However, the fast Li infusing process generally induces uncontrollable and undesirable structures during the formation of composite Li metal anode. It is widely accepted that both physical and chemical interactions between the molten Li and the hosts provide driving forces for Li infusing into the host, but which one plays the dominant role has not been explored clearly. In this work, a 3D carbon felt coated by petaloid zinc oxide (CFZO) is designed as a controllable host for prestoring Li metal via thermal infusion method. It is revealed that the morphology induced physical driving force plays a more important role than the chemical reaction between ZnO and molten Li in the thermal infusion process. The physical driving force originates from the capillarity effect, depending on the roughness of the host according to Wenzel's model. An adjustable Li infusing process can be controlled to fabricate the Li composite electrode with a hierarchical structure (with dense Li-rich layer and porous Li-poor layer). The unique structure of the CFZO-Li not only provides enough spaces for Li deposition, but also disperses local current density to induce a uniform Li deposition behavior, thus Li dendrites can be suppressed effectively. As a result, CFZO-Li anode exhibits promising cycle stability when coupled with both Li-containing (LiNi 0.8 Co 0.15 Al 0.05 O 2 ) and Li-free (sulfur) cathodes.

25 ENERGY STORAGE↗
DOE OSTI2021

Mesoscale Frank–Kasper Crystal Structures from Dendron Assembly by Controlling Core Apex Interactions

Single-component polymeric materials open up a great potential for self-assembly into mesoscale complex crystal structures that are known as Frank-Kasper (FK) phases. Predicting the packing structures of the soft-matter spheres, however, remains a challenge even when the molecular design is precisely known. Here, we investigate the role of the molecules' enthalpic interaction in determining the low-symmetry crystal structures. To this end, we synthesize architecturally asymmetric dendrons by varying their apex functionalities and examine the packing structures of the second-generation (G2) dendritic wedges. Our work shows that weakening the hydrogen bonding of the dendron apex makes the particles softer and smaller, and leads to the formation of various FK structures at lower temperatures, including the new observation of a FK C14 phase in the cone-shaped dendron systems. As a consequence of the free energy balance between the particle's interfacial tension and the chain's stretching, various packing structures are mainly tuned by designing the hydrogen bonding interaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Impact of Salt Chemistry and Interlayer Architecture on Solid Electrolyte Interphase Composition and Performance

Reversible lithium metal anodes require interphases that are chemically stable, mechanically robust, and compatible with scalable processing. Here, we use slot-die-coated, salt-rich PEO interlayers to design SEI nanolayers on Cu current collectors and isolate how salt anion chemistry controls interphase composition and lithium plating/stripping behavior in architectures relevant to Li plating and anode-free cells. Mesoscale modeling shows that dendrite initiation at SEI defects is governed by a tradeoff among interphase thickness, ionic conductivity, and stiffness through defect-driven current focusing, motivating controlled formation from thin precursor layers. Using UHV-transferred XPS and ToF-SIMS depth profiling after controlled Li deposition, we find that fluorinated sulfonylimide salts (LiTFSI, LiFSI) form mixed inorganic/organic interphases containing LiF and PEO-derived alkoxides, with LiFSI producing a more LiF-dominant Li-facing surface than LiTFSI under identical conditions. In contrast, LiNO 3 -containing interlayers yield a comparatively thick nitrate-derived interphase that reduces upon Li contact to an N-rich inorganic layer (Li–N/N 3− , LiN x O y ). In Cu| |Li cells, these designed interlayers reduce interfacial resistance and improve Coulombic efficiency (CE) and critical current density (CCD) relative to uncoated controls, with LiFSI- and LiNO 3 -based interlayers providing the highest CE/CCD. Overall, the results demonstrate a manufacturing-relevant approach to engineer SEI nanolayers by salt chemistry, providing pathways to improve reversible lithium metal anodes while reducing reliance on LiTFSI.

anion chemistry↗
DOE OSTI2024

Molecular Engineering Enabled Stable Deep Eutectic Amide-Based Electrolyte for High-Temperature Lithium–Metal Batteries

The development of advanced lithium-metal batteries (LMBs), such as high-temperature LMBs and high-energy-density LMBs, has critical requirements for electrolytes. However, conventional electrolytes suffer from thermal instability and insufficient electrolyte/Li interfacial compatibility, severely limiting their utilization in high-temperature LMBs. Herein, we design a high-temperature N-methylacetamide (NMAc)-based deep eutectic electrolyte (DEE) by molecular engineering on a solvation structure via a sacrificial additive of vinyl ethylene carbonate (VEC). Specifically, VEC interacts with the Li prior to NMAc, facilitating the formation of a solid electrolyte interphase to inhibit the reaction between Li and NMAc. The stable VEC-DEE effectively suppresses the growth of lithium dendrites and ensures the battery a cycling stability of 550 cycles at 80 °C. Additionally, we also demonstrate the application of VEC-DEE in high-energy-density LMBs with a high mass loading of 2.5 mAh/cm 2 . In conclusion, this research opens a new avenue for the rational design of advanced high-temperature electrolytes.

25 ENERGY STORAGE↗