Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data segmentation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

High performance quarter-inch cartridge tape systems

Within the established low cost structure of Data Cartridge drive technology, it is possible to achieve nearly 1 terrabyte (10(exp 12)) of data capacity and more than 1 Gbit/sec (greater than 100 Mbytes/sec) transfer rates. The desirability to place this capability within a single cartridge will be determined by the market. The 3.5 in. or smaller form factor may suffice to serve both the current Data Cartridge market and a high performance segment. In any case, Data Cartridge Technology provides a strong sustainable technology growth path in the 21st century.

Schwarz, Ted↗

A mechanical energy analysis of gait initiation

The analysis of gait initiation (the transient state between standing and walking) is an important diagnostic tool to study pathologic gait and to evaluate prosthetic devices. While past studies have quantified mechanical energy of the body during steady-state gait, to date no one has computed the mechanical energy of the body during gait initiation. In this study, gait initiation in seven normal male subjects was studied using a mechanical energy analysis to compute total body energy. The data showed three separate states: quiet standing, gait initiation, and steady-state gait. During gait initiation, the trends in the energy data for the individual segments were similar to those seen during steady-state gait (and in Winter DA, Quanbury AO, Reimer GD. Analysis of instantaneous energy of normal gait. J Biochem 1976;9:253-257), but diminished in amplitude. However, these amplitudes increased to those seen in steady-state during the gait initiation event (GIE), with the greatest increase occurring in the second step due to the push-off of the foundation leg. The baseline level of mechanical energy was due to the potential energy of the individual segments, while the cyclic nature of the data was indicative of the kinetic energy of the particular leg in swing phase during that step. The data presented showed differences in energy trends during gait initiation from those of steady state, thereby demonstrating the importance of this event in the study of locomotion.

Leg/physiology↗

Early season spring small grains proportion estimation

An accurate, automated method for estimating early season spring small grains from Landsat MSS data is discussed. The method is summarized and the results of its application to 100 sample segment-years of data from the US Northern Great Plains in 1976, 1977, 1978, and 1979 are summarized. The results show that this estimator provides accurate estimates earlier in the growing season than previous methods. Ground truth is required only in the estimator development, and data storage, transmission, preprocessing, and processing requirements are minimal.

Phinney, D. E.↗

Method for Reducing the Refresh Rate of Fiber Bragg Grating Sensors

The invention provides a method of obtaining the FBG data in final form (transforming the raw data into frequency and location data) by taking the raw FBG sensor data and dividing the data into a plurality of segments over time. By transforming the raw data into a plurality of smaller segments, processing time is significantly decreased. Also, by defining the segments over time, only one processing step is required. By employing this method, the refresh rate of FBG sensor systems can be improved from about 1 scan per second to over 20 scans per second.

Parker, Allen R., Jr.↗

An Occultation by Saturn's Rings on 1991 October 2-3 October 2-3 Observed with the Hubble Space Telescope

An occultation of the star GSC 6323-01396 (V = 11.9) by Saturn's rings was observed with the High-Speed Photometer on the Hubble Space Telescope (HST) on 1991 October 2-3. This occultation occurred when Saturn was near a stationary point, so the apparent motion of Saturn relative to the star was dominated by the HST orbital motion (8 km/s). Data were recorded simultaneously at effective wavelengths of 3200 and 7500 A, with an integration time of 0.15 s. Fifteen segments of occultation data, totaling 6.8 h, were recorded in 13 successive orbits during the 20.0 h interval from UTC 1991 October 2, 19:35 until UTC 1991 October 3, 15:35. Occultations by 43 different features throughout the classical rings were unambiguously identified in the light curve, with a second occultation by 24 of them occurring due to spacecraft orbital parallax during this extremely slow event. Occultation times for features currently presumed circular were measured and employed in a geometrical model for the rings. This model, relating the observed occultation times to feature radii and longitudes, is presented here and is used in a least-squares fit for the pole direction and radius scale of Saturn's ring system.

Elliot, J. L.↗

An Object-Oriented Interface to the CCSDS Ground Telecommand Services

The Telecommand Data Routing and Channel Services defined by the Consultative Committee for Space Data Systems (CCSDS) are flexible enough to support a myriad of commanding models. Because the standard is so broad, the traditional approach has been to implement only the portion of the standard needed by the particular spacecraft being tested/operated. Tasked with providing Telecommand Services for an entire class of spacecraft, where each spacecraft may choose any valid CCSDS commanding model, NASA Code 584 designed a common architecture capable of handling the full CCSDS protocol. The solution uses another CCSDS standard - the Standard Formatted Data Unit (SFDU) as the interface to the Telecommand Services. SFDUs provide a consistent way of labelling data objects, as well as allowing data objects to encapsulate other data objects. The resulting interface is: - Flexible: The full Data Routing and Channel Services are available via a single interface. The client (i.e. the command source) may enter commands at any layer within the protocol stack, specify any of the data aggregation or segmentation methods, and dynamically set any configuration parameter defined in the standard. - Object-oriented: Each object specifies both the data and the actions to be performed with the data. An object may contain other objects. - Expandable: New capabilities are added by defining new objects. Objects pass thru the protocol layers until they reach the applicable layer. The resulting design is: - Modular: The logic for each protocol layer is contained in a separate Application Program Interface (API). The objects used for the external interface are also used for communication between layers. - Distributable: The design can be split along any layer boundary for distribution across multiple machines. The objects ensure data consistency across platforms. This paper describes the SFDU-based interface and the resulting protocol implementation. The implementation is currently used by NASA (National Aeronautics and Space Administration) for integration & test of the microwave Anisotropy Probe (MAP) and Earth observer-I (EO-l) spacecraft. It will be used for post-launch operations of these spacecraft as well as the Imager for Magnetopause to Aurora Global Exploration (IMAGE) spacecraft.

Ray, Timothy Joseph↗

Experimental evaluation of the certification-trail method

Certification trails are a recently introduced and promising approach to fault-detection and fault-tolerance. A comprehensive attempt to assess experimentally the performance and overall value of the method is reported. The method is applied to algorithms for the following problems: huffman tree, shortest path, minimum spanning tree, sorting, and convex hull. Our results reveal many cases in which an approach using certification-trails allows for significantly faster overall program execution time than a basic time redundancy-approach. Algorithms for the answer-validation problem for abstract data types were also examined. This kind of problem provides a basis for applying the certification-trail method to wide classes of algorithms. Answer-validation solutions for two types of priority queues were implemented and analyzed. In both cases, the algorithm which performs answer-validation is substantially faster than the original algorithm for computing the answer. Next, a probabilistic model and analysis which enables comparison between the certification-trail method and the time-redundancy approach were presented. The analysis reveals some substantial and sometimes surprising advantages for ther certification-trail method. Finally, the work our group performed on the design and implementation of fault injection testbeds for experimental analysis of the certification trail technique is discussed. This work employs two distinct methodologies, software fault injection (modification of instruction, data, and stack segments of programs on a Sun Sparcstation ELC and on an IBM 386 PC) and hardware fault injection (control, address, and data lines of a Motorola MC68000-based target system pulsed at logical zero/one values). Our results indicate the viability of the certification trail technique. It is also believed that the tools developed provide a solid base for additional exploration.

Sullivan, Gregory F.↗

Satellite-Derived Imagery and Transfer Learning: A Novel Technique for Land Cover Classification

Land cover classification is a continuing research topic due to its relevance to land use and land cover changes from impacts such as climate change, agriculture, urbanization, and hazardous weather. Simple access to frequently changing land cover classifications could provide knowledge and decision support to various researchers and agencies across the globe for each of above-mentioned and related influences. This research aims to provide a novel technique for land cover classification of remote sensing imagery; harnessing Artificial Neural Networks and transfer learning (TL). Knowledge sharing techniques within machine learning are typically utilized when training datasets are sparse or transitions between data modalities is required. In this case, two data modalities, multi and hyperspectral data, are considered for knowledge transfer. The large number of continuous spectral bands available from hyperspectral sensors typically provide increased sophisticated land classification capability compared to more traditional multispectral imagery with limited discrete spectral bands. However, large-scale, frequent access to hyperspectral imagery is relatively limited. The proposed classification technique would therefore prove useful in regions in which hyperspectral data are not readily available for classification but multispectral data are. Image segmentation models are trained on each multi and hyperspectral datasets. Knowledge sharing techniques are then applied to each model to understand what knowledge, if any, is gained when moving between the data modalities. The datasets utilized for training and testing a U-Net model include the European Space Agency’s multispectral imager Sentinel-2 and the hyperspectral German Aerospace Center’s Earth Sensing Imaging Spectrometer (DESIS). Initially, only two classes, land and water, are classified for simplicity. However, more complex classes can be added if knowledge sharing is successful. The workflow for image classification through supervised image segmentation with a U-Net model will be discussed along with metrics calculated before and after TL for both Sentinel-2 and DESIS data are applied. Additionally, future steps to advance the sophistication of this technique as well as other applicable methodologies will be explored.

Emily Foshee↗

LACIE performance predictor final operational capability program description, volume 2

Given the swath table files, the segment set for one country and cloud cover data, the SAGE program determines how many times and under what conditions each segment is accessed by satellites. The program writes a record for each segment on a data file which contains the pertinent acquisition data. The weather data file can also be generated from a NASA supplied tape. The Segment Acquisition Selector Program (SACS) selects data from the segment reference file based upon data input manually and from a crop window file. It writes the extracted data to a data acquisition file and prints two summary reports. The POUT program reads from associated LACIE files and produces printed reports. The major types of reports that can be produced are: (1) Substrate Reference Data Reports, (2) Population Mean, Standard Deviation and Histogram Reports, (3) Histograms of Monte Carlo Statistics Reports, and (4) Frequency of Sample Segment Acquisitions Reports.

Source record↗

Variables in automatic classification over extended remote sensing test sites.

Four major causes of variation in response of multispectral scanner data were examined utilizing data from two large test sites. In one case, data throughout a 70-mile flightline was automatically classified with a high degree of accuracy (98%), utilizing training samples from a single small segment of the data. In the second case, spectral data for wheat and other cover types were calibrated and utilized to train the computer, resulting in data up to 90 miles away being classified with an acceptable degree of accuracy (91%), although significant changes in solar illumination and ground cover conditions existed.

Hoffer, R. M.↗

A self-documenting source-independent data format for computer processing of tensor time series

The UCLA Space Science Group has developed a fixed format intermediate data set called a block data set, which is designed to hold multiple segments of multicomponent sampled data series. The format is sufficiently general so that tensor functions of one or more independent variables can be stored in the form of virtual data. This makes it possible for the unit data records of the block data set to be arrays of a single dependent variable rather than discrete samples. The format is self-documenting with parameter, label and header records completely characterizing the contents of the file. The block data set has been applied to the filing of satellite data (of ATS-6 among others).

Mcpherron, R. L.↗

Signature extension methods in crop area estimation

The Procedure B multispectral processing system is both multisegment and multistratum. It uses data from several LACIE-sized segments together and makes a proportion estimate for the entire group of segments as well as for the individual segments. In the clustering of data features, Procedure B produces multiple classes or strata rather than just two strata (as in Procedure 1), and performs stratified sampling on each of these mutliple strata in order to make a proportion estimate. Tests results for the components and for the overall performance of Procedure B are presented, and conclusions that can be drawn from these tests are discussed. The rationale for signature extension for crop area estimation is summarized.

Kauth, R. J.↗

Gravity Wave Energetics Determined From Coincident Space-Based and Ground-Based Observations of Airglow Emissions

Significant progress was made toward the goals of this proposal in a number of areas during the covered period. Section 5.1 contains a copy of the originally proposed schedule. The tasks listed below have been accomplished: (1) Construction of space-based observing geometry gravity wave model. This model has been described in detail in the paper accompanying this report (Section 5.2). It can simulate the observing geometry of both ground-based, and orbital instruments allowing comparisons to be made between them. (2) Comparisons of relative emission intensity, temperatures, and Krassovsky's ratio for space- and ground-based observing geometries. These quantities are used in gravity wave literature to describe the effects of the waves on the airglow. (3) Rejection of Bates [1992], and Copeland [1994] chemistries for gravity wave modeling purposes. Excessive 02(A(sup 13)(Delta)) production led to overproduction of O2(b(sup 1)(Sigma)), the state responsible for the emission of O2. Atmospheric band. Attempts were made to correct for this behavior, but could not adequately compensate for this. (4) Rejection of MSX dataset due to lack of coincident data, and resolution necessary to characterize the waves. A careful search to identify coincident data revealed only four instances, with only one of those providing usable data. Two high latitude overpasses and were contaminated by auroral emissions. Of the remaining two mid-latitude coincidences, one overflight was obscured by cloud, leaving only one ten minute segment of usable data. Aside from the statistical difficulties involved in comparing measurements taken in this short period, the instrument lacks the necessary resolution to determine the vertical wavelength of the gravity wave. This means that the wave cannot be uniquely characterized from space with this dataset. Since no observed wave can be uniquely identified, model comparisons are not possible.

Source record↗

Advanced Analytics and Big Earth Data

NASA's Earth Science Data Systems process, archive and distribute petabytes of Earth Observation data to a variety of end users. These end users will face dramatically increased data size in the near future, bringing about new challenges and opportunities in analyzing those data. One area of particular ferment currently is Machine Learning. Many Machine Learning methods are black boxes, limiting direct insight into the data's properties. However, they can be used for a variety of data enhancement purposes, such as parameter retrieval, data fusion and image classification and segmentation. The Earth Observing System Data and Information System is also evolving to host large data volumes in the cloud, enabling data proximal analysis. As part of this effort, an Analytics framework is being developed to support and enhance user analysis of the data. By using standards based services in the framework, diverse user communities can be served, while also allowing inter-system collaboration in the analysis process.

Cloud Computing↗

Telecommunications end-to-end systems monitoring on TOPEX/Poseidon: Tools and techniques

The TOPEX/Poseidon Project Satellite Performance Analysis Team's (SPAT) roles and responsibilities have grown to include functions that are typically performed by other teams on JPL Flight Projects. In particular, SPAT Telecommunication's role has expanded beyond the nominal function of monitoring, assessing, characterizing, and trending the spacecraft (S/C) RF/Telecom subsystem to one of End-to-End Information Systems (EEIS) monitoring. This has been accomplished by taking advantage of the spacecraft and ground data system structures and protocols. By processing both the received spacecraft telemetry minor frame ground generated CRC flags and NASCOM block poly error flags, bit error rates (BER) for each link segment can be determined. This provides the capability to characterize the separate link segments, determine science data recovery, and perform fault/anomaly detection and isolation. By monitoring and managing the links, TOPEX has successfully recovered approximately 99.9 percent of the science data with an integrity (BER) of better than 1 x 10(exp 8). This paper presents the algorithms used to process the above flags and the techniques used for EEIS monitoring.

Calanche, Bruno J.↗

Mind the Gap: Addressing Data Gaps and Assessing Noise Mismodeling in LISA

Due to the sheer complexity of the Laser Interferometer Space Antenna (LISA) space mission, data gaps arising from instrumental irregularities and/or scheduled maintenance are unavoidable. Focusing on merger-dominated massive black hole binary signals, we test the appropriateness of the Whittle-likelihood on gapped data in a variety of cases. From first principles, we derive the likelihood valid for gapped data in both the time and frequency domains. Cheap-to-evaluate proxies to p-p plots are derived based on a Fisher-based formalism, and verified through Bayesian techniques. Our tools allow to predict the altered variance in the parameter estimates that arises from noise mismodeling, as well as the information loss represented by the broadening of the posteriors. The result of noise mismodeling with gaps is sensitive to the characteristics of the noise model, with strong low-frequency (red) noise and strong high-frequency (blue) noise giving statistically significant fluctuations in recovered parameters. We demonstrate that the introduction of a tapering window reduces statistical inconsistency errors, at the cost of less precise parameter estimates. We also show that the assumption of independence between inter-gap segments appears to be a fair approximation even if the data set is inherently coherent. However, if one instead assumes fictitious correlations in the data stream, when the data segments are actually independent, then the resultant parameter recoveries could be inconsistent with the true parameters. The theoretical and numerical practices that are presented in this work could readily be incorporated into global-fit pipelines operating on gapped data.

LISA↗

AVIRIS study of Death Valley evaporite deposits using least-squares band-fitting methods

Minerals found in playa evaporite deposits reflect the chemically diverse origins of ground waters in arid regions. Recently, it was discovered that many playa minerals exhibit diagnostic visible and near-infrared (0.4-2.5 micron) absorption bands that provide a remote sensing basis for observing important compositional details of desert ground water systems. The study of such systems is relevant to understanding solute acquisition, transport, and fractionation processes that are active in the subsurface. Observations of playa evaporites may also be useful for monitoring the hydrologic response of desert basins to changing climatic conditions on regional and global scales. Ongoing work using Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data to map evaporite minerals in the Death Valley salt pan is described. The AVIRIS data point to differences in inflow water chemistry in different parts of the Death Valley playa system and have led to the discovery of at least two new North American mineral occurrences. Seven segments of AVIRIS data were acquired over Death Valley on 31 July 1990, and were calibrated to reflectance by using the spectrum of a uniform area of alluvium near the salt pan. The calibrated data were subsequently analyzed by using least-squares spectral band-fitting methods, first described by Clark and others. In the band-fitting procedure, AVIRIS spectra are fit compared over selected wavelength intervals to a series of library reference spectra. Output images showing the degree of fit, band depth, and fit times the band depth are generated for each reference spectrum. The reference spectra used in the study included laboratory data for 35 pure evaporite spectra extracted from the AVIRIS image cube. Additional details of the band-fitting technique are provided by Clark and others elsewhere in this volume.

Crowley, J. K.↗

Observations on TeV gamma rays from Geminga and PSR 0950+08

The Geminga (2 CG 195+04) which exhibits a periodicity with a period of 59 to 60 s in its emission of X-rays, GeV gamma rays and TeV gamma rays was studied. During the winter of 1984 to 1985, this object was observed to see if it emits TeV gamma rays with a periodicity approx 60 s. The observations were carried out at two different sites separated by 11 Km with the Ooty Atmospheric Cerenkov Array split into two parts. Data were collected during clear moonless nights for a total duration of 15.3 hours spread over 2 months. Since the first time derivative of period is believed to be large and uncertain. The total data are subdivided into segments of duration not more than 3 days each to steer clear of the effects of P in the phase analysis. If TeV gamma ray signals are seen in each of these segments, it is possible to derive P from observed data.

Bhat, P. N.↗