Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “D CODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

High- and Mid-Fidelity Modeling Comparison for a Floating Marine Turbine System: Preprint

There is a lack of suitable numerical tools, particularly open-source tools, that can be used for designing and optimizing marine turbine systems. The National Renewable Energy Laboratory (NREL) has added features to their widely used mid-fidelity wind turbine modeling code, OpenFAST, to enable modeling of axial flow marine turbines. This necessitated the addition of several physical effects relevant to marine turbines that can be neglected for wind turbines. These include buoyant loads, added mass and inertia loads, wave-current superposition, and changes to the coordinate systems. This updated version of OpenFAST allows for the modeling of both fixed and floating marine turbine systems at a speed comparable to real time. While efficient for long simulations, large sets of load cases, and design studies, mid-fidelity codes cannot capture all of the potentially important physical phenomenon impacting marine turbine systems. High-fidelity computational fluid dynamics (CFD) simulations can capture more flow effects with fewer assumptions and provide detailed body pressure mapping and flow-field information. It is important to compare predictions between mid-fidelity and high-fidelity codes, both to verify the models and to understand the limitations. A floating marine turbine system designed by NREL was modeled both with OpenFAST and with the commercial CFD code, STARCCM+. The CFD model used a 3-D unsteady Reynolds-averaged Navier-Stokes solver for a volume-of-fluid numerical wave and current tank. The blade-resolved simulations used the sliding-interface technique for the spinning rotor and an overset grid to accommodate the rigid-body motion of the floating system. The mooring system was modelled with a custom coupling of the CFD solver with the open-source code, MoorDyn. This improves upon the existing quasi-static catenary solver in STARCCM+, which lacks seabed contact or line-to-line connections. Spatial and temporal convergence studies were conducted. The simulation results for a combined current and wave condition are compared between OpenFAST and CFD, highlighting the capabilities of the mid-fidelity code and identifying the areas where a high-fidelity approach is needed.

CFD↗
DOE OSTI2020

Sierra/SolidMechanics 4.58 User's Guide

Sierra / SolidMechanics (Sierra / SM) is a Lagrangian, three-dimensional code for finite element analysis of solids and structures. It provides capabilities for explicit dynamic, implicit quasistatic and dynamic analyses. The explicit dynamics capabilities allow for the efficient and robust solution of models with extensive contact subjected to large, suddenly applied loads. For implicit problems, Sierra / SM uses a multi-level iterative solver, which enables it to effectively solve problems with large deformations, nonlinear material behavior, and contact. Sierra / SM has a versatile library of continuum and structural elements, an d a large library of material models. The code is written for parallel computing environments enabling scalable solutions of extremely large problems for both implicit and explicit analyses. It is built on the SIERRA Framework, which facilitates coupling with other SIERRA mechanics codes . This document describes the functionality and input syntax for Sierra / SM.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Implementing Faraday effect measurement constraints into the Grad–Shafranov equilibrium fitting code EFIT

A new tool for the exploration and diagnosis of the internal magnetic field of plasmas in the DIII-D tokamak in the form of a constraint on the EFIT (Equilibrium Fitting) Grad–Shafranov code based on the Faraday-effect Radial Interferometer-Polarimeter (RIP) diagnostic is presented, including description, verification, and sample application. The physics underlying the diagnostic and its implementation into EFIT are discussed, and the results showing the verification of the model are given, and the model’s limitations are discussed. The influence of the diagnostic’s input on the resulting equilibrium parameters is characterized. Furthermore, the effect of electron density profile refinement is evaluated and found to be negligible. A sample application of the diagnostic is shown, indicating that the RIP constraint has similar effects on the equilibrium as motional Stark effect constraints do.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

The divergence of nearby trajectories in soft-sphere DEM

The n-body instability is investigated with the soft-sphere discrete element method. The divergence of nearby trajectories is quantified by the dynamical memory time. Using the inverse proportionality between the dynamical memory time and the largest Lyapunov exponent, the soft-sphere discrete element method results are compared to previous hard-sphere molecular dynamics data for the first time. Good agreement is observed at low concentrations and the degree of instability is shown to increase asymptotically with increasing spring stiffness. At particle concentrations above 30%, the soft-sphere Lyapunov exponents increase faster than the corresponding hard-sphere data. Finally, this paper concludes with a demonstration of how this case study may be used in conjunction with regression testing and code verification activities.

42 ENGINEERING↗
DOE OSTI2020

Toroidal modeling of runaway electron loss due to 3-D fields in DIII-D and COMPASS

The 3-D field induced relativistic runaway electron (RE) loss has been simulated for DIII-D, COMPASS and ITER plasmas, utilizing the MARS-F code incorporated with the recently developed and updated RE orbit module (REORBIT). Modeling shows effectively 100% loss of a post-disruption, high-current runaway beam in DIII-D, due to the 1 kG level of magnetic field perturbation produced by a fast growing n = 1 resistive kink instability. The RE loss is shown to be independent of the particle energy or the initial location of particles in the configuration space. Applied resonant magnetic perturbation (RMP) fields from in-vessel coils are not effective for RE beam mitigation in DIII-D, but do produce finite (>10%) RE loss in COMPASS, consistent with experimental observations in above two devices. The major reasons for this difference in RE control by RMP between these two devices are (i) the coil proximity to the RE beam and (ii) the effective coil current scaling versus the machine size and the toroidal magnetic field. About 10% RE loss fraction is also predicted for an ITER 15 MA scenario with pre-disruption plasma, highlighting the role of the plasma response. Up to 30% loss is computed, however, by artificially scaling the equilibrium pressure to zero. This is due to the more resistive plasma response and stronger resulting field line stochasticity. Distributions of the lost REs to the limiting surface show poloidally peaked profile near the high-field-side in both DIII-D and COMPASS, covering about 100o poloidal angle. Higher perturbation field level and/or higher particle energy also result in REs being lost to the low-field-side of the limiting surface of these two devices, increasing the effective wetted area. Finally, for the modeled ITER plasmas, the applied RMP field, with optimal poloidal spectrum that maximizes the edge localized mode control, leads to REs being lost to the lower divertor region of the limiting surface within a narrow poloidal band.

3-D field↗
DOE OSTI2022

Predicting hot electron generation in inertial confinement fusion with particle-in-cell simulations

A series of two-dimensional particle-in-cell simulations with speckled laser drivers was carried out to study hot electron generation in direct-drive inertial confinement fusion on OMEGA. Scaling laws were obtained for hot electron fraction and temperature as functions of laser/plasma conditions in the quarter-critical region. Using these scalings and conditions from hydro simulations, the temporal history of hot electron generation can be predicted. The scalings can be further improved to predict hard x-rays for a collection of OMEGA warm target implosions within experimental error bars. Furthermore, these scalings can be readily implemented into inertial confinement fusion design codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Implementation of Monte Carlo Transport in the General Relativistic SpEC Code

Neutrino transport and neutrino-matter interactions are known to play an important role in the evolution of neutron star mergers and of their post-merger remnants. Neutrinos cool remnants, drive post-merger winds, and deposit energy in the low-density polar regions where relativistic jets may eventually form. Neutrinos also modify the composition of the ejected material, impacting the outcome of nucleosynthesis in merger outflows and the properties of the optical/infrared transients that they power (kilonovae). So far, merger simulations have largely relied on approximate treatments of the neutrinos (leakage, moments) that simplify the equations of radiation transport in a way that makes simulations more affordable but also introduces unquantifiable errors in the results. To improve on these methods, we recently published a first simulation of neutron star mergers using a low-cost Monte Carlo algorithm for neutrino radiation transport. Our transport code limits costs in optically thick regions by placing a hard ceiling on the value of the absorption opacity of the fluid, yet all approximations made within the code are designed to vanish in the limit of infinite numerical resolution. We provide here an in-depth description of this algorithm, of its implementation in the SpEC merger code, and of the expected impact of our approximations in optically thick regions. We argue that the last is a subdominant source of error at the accuracy reached by current simulations and for the interactions currently included in our code. We also provide tests of the most important features of this code.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Fuel Performance Evaluation of THOR-C Experiments

The Temperature Heatsink Overpower Response Commissioning (THOR-C) and THOR-Metal (THOR-M) experiments will be performed as part of an ongoing project for testing sodium fast reactor fuels with the Japan Atomic Energy Agency (JAEA). The THOR-C experiments consist of fresh metallic fuel pins and have been analyzed using the ABAQUS, Ansys codes and the BISON fuel performance code. THOR-M-Loss of Flow-1 (THOR-M-LOF-1) is designed to test an EBR-II irradiated fuel pin under LOF conditions. Simulation of the THOR-MLOF-1 experiment required first simulating the base irradiation of the fuel pin in EBR-II. MFUEL module of SAS4A/SASSYS-1 [1] is a physics-based metallic fuel performance model applicable to the normal operation, transient scenarios and fuel failure modeling including scenarios with bulk fuel melting. The model has been validated using EBR-II normal operation, separate effect transient tests as well as TREAT M-Series transient tests [2]. In this study, MFUEL models has been utilized together with a new capsule heat transfer model developed in this project. The new heat transfer model was necessary due to (1) significant amount of heat losses that required 2D heat transfer, (2) the presence of a titanium heat sink, rejecting a significant amount of heat, and (3) stagnant coolant conditions, which are inconsistent with SAS4A/SASSYS-1 (SAS) heat transfer model. Updates to SAS4A/SASSYS-1 and MFUEL has been described below, followed by a preliminary validation effort using the results from THOR-C-2 fresh fuel capsule experiment. A previous study for THOR-C-2 analysis using BISON code is also utilized in this study to model this test [3]. [1] D. O’Grady, A. J. Brunett, L. Ibarra, A. Karahan, T. Kim, T. S. Sumner, R. Thomas, T. H. Fanning, “The SAS4A/SASSYS-2 Version 5.7 Safety Analysis Code System,” Argonne National Laboratory,ANL/NSE-SAS/5.7, (2023). [2] A. Karahan, T. Kim, T. Fanning, D. O’Grady, “Validation of MFUEL Metal Fuel Performance Models of SAS4A/SASSYS-1,” Argonne National Laboratory, ANL/NSE-23/11, (2023). [3] M. Mihelish, A. Zabriskie, K. Paaren, P. Medvedev, C. Jensen, “Fuel Performance Predictions for the TREAT THOR-C Experiments,” Idaho National Laboratory, INL/RPT-23-73397, Revision 0, (2023)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Plasma rotation and diamagnetic drift effects on the resistive wall modes in the negative triangularity tokamaks

Abstract It was found previously that the negative triangularity (NT) configuration is more MHD-unstable for low n modes than the positive triangularity (PT) case, although the situation is reversed for intermediate n modes and the NT configuration becomes more stable for intermediate n modes ( n = 3 − 10 ) (Zheng et al 2021 Nucl. Fusion 61 116014). Here, n is the toroidal mode number. In this work, we extend the studies to include the rotation effects, as well as the diamagnetic drift effects, to see how the resistive wall modes (RWMs) in the NT configuration are affected as compared with the PT configuration. This is particularly motivated by noting that the wall interface with the plasma is quite different between the NT and PT configurations. It affects the plasma rotation and diamagnetic drift effects on the low n RWM. We consider the DIII-D-NT-experiment equilibrium reconstructed by the EFIT code. Based on the equilibrium g-file, the extended equilibria are constructed with the VMEC code by varying the beta values while keeping the pressure and poloidal current flux profiles basically unchanged. The bootstrap current contribution to the equilibria is taken into account with the Sauter formula. The MHD stability is then computed using the AEGIS code with the rotation and diamagnetic drift effects taken into account. We found that, although the NT configuration is less stable for n = 1 MHD modes, the rotation and diamagnetic drift stabilization effects on RWMs are more effective in the NT configuration than in the PT one. Note that even in the PT case, the stabilization of RWMs by the rotation and kinetic effects is critical. Because the low-n RWMs in the regular NT case are more unstable, the rotation and diamagnetic drift stabilization effects found in this research are important for the NT tokamak concept.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Calculation of the First Moment of Energy Using D-T Reactivity Formalisms Under the Maxwell-Boltzmann Distribution (Pt. 1)

Nuclear fusion science is an example of a scientific field with a rich history of expert involvement and scientific publications, which together, form an expert-knowledge base. One example of this history is the utilization of published reaction rates from a variety of authors. Investigators for Deuterium-Tritium (D-T) ion fusion can choose from using frequently cited methods: the Bosch and Hale reactivity, thermonuclear reaction rates from Caughlan and Fowler, and the reactivity evaluation from Miley, Towner & Ivich which forms the basis of the Naval Research Lab (NRL) formulary. There are other choices available. Each of the reactivity formulations considered here, are based upon the Maxwell- Boltzmann velocity distribution for D-T fusion ion reactants. Numerical methods for computer codes simulating hot, energetic plasmas, include tabulations of the reactivity, and the first moment of energy. The purpose of this study is to answer the question: what is the first moment of energy, and how has it been formulated? This report is part of a series of reports by the authors on D-T fusion-reaction formalism. The present focus is on defining the mathematical relationship of the first moment of D-T fusion ion kinetic energy, $\langle$E$\rangle$, with the fusion crosssection, fusion reactivity and its derivative with respect to ion-temperature. Three variants of the first moment $\langle$E$\rangle$ are analytically developed and explored: 1) constant cross-section, 2) a normalized first moment, and 3) a particular function of the first moment. Much of the mathematical development is relegated to the Appendices, for a concise presentation of topics and results. A research component of this discussion is our comparison of some of the reactivity and its derivative results between evaluations (1) versus (2) and (3), which the authors have not found in any other publication to date. This investigation is useful for validation, verification (V&V) and uncertainty quantification (UQ) as it compares the work of several authors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Transport model predictions of 225 Ac production cross sections via energetic p, d and α irradiation of 232 Th targets

Monte Carlo transport codes PHITS and MCNP6 were used to calculate the production cross sections of 225,227 Ac, 227,229 Th, 223,225 Ra, and 229,230,231 Pa via the bombardment of a 232 Th target with energetic protons, deuterons, and α-particles. The incident projectile energies ranged between 10 and 800 MeV/nucleon. When possible, the predicted production cross sections were compared with the available experimental data and other predictions. Here, the degree of the codes’ abilities to match the measured data provides a qualitative assessment of the codes’ abilities to predict data from similar, but unmeasured, projectile/target systems. In addition, a comparison between calculated cross sections and data may provide insight into possible improvements in the physics models employed by those transport codes.

223Ra↗
DOE OSTI2025

Reconstruction of current profiles from external magnetic and MSE measurements on DIII-D

This work introduces a new current model into the EFIT code for plasma current profile reconstruction. Using this model, edge-localized current density profiles are reconstructed solely from external magnetic measurements. Quantitative comparisons show that edge current profiles obtained with the new current model align closely with those from kinetic equilibrium reconstruction. The new model enables current density reconstruction with fewer diagnostics than kinetic equilibrium reconstruction (Lao et al 1990 Nucl. Fusion 30 1035–49), demonstrating that edge-localized current density information can be obtained from external magnetic measurements only, without the help of kinetic profiles and internal diagnostics, and without using the bootstrap current model. Furthermore, with the constraints of external magnetic and MSE measurements, current profiles in full radius obtained from the new model are in good agreement with the results of kinetic equilibrium reconstruction, which not only improves the efficiency of current reconstruction but also helps avoid possible errors caused by different kinds of diagnoses. Possible applications are also discussed, and a brief analysis of the evolution of the full-radius current density is performed. Noticeable decreases in both the magnitude and gradient of the edge current around the time of ELM bursts are observed. Moreover, analysis of the full radius current density profiles ( ρ N = 0 − 1.0, ρN denotes to square root of the normalized toroidal flux) reveals that as the edge current changes, the inner current also changes following a sinusoidal-like pattern at almost all time slices during four type-I ELMs in discharge 161493. The current evolution in the inner region ( ρ N = 0.2 − 0.6) is synchronized with the boundary region ( ρ N = 0.89 − 1.0), while the intermediate region ( ρ N = 0.6 − 0.89) shows opposite behavior. This sinusoidal-like variations in full-radius current density profile indicates strong core-pedestal coupling, suggesting ELMs significantly affect core plasmas, though current changes manifest differently across radial regions.

EFIT↗
DOE OSTI2024

Cluster-dynamics-based parameterization for sulfuric acid–dimethylamine nucleation: comparison and selection through box and three-dimensional modeling

Clustering of gaseous sulfuric acid (SA) enhanced by dimethylamine (DMA) is a major mechanism for new particle formation (NPF) in polluted atmospheres. However, uncertainty remains regarding the SA–DMA nucleation parameterization that reasonably represents cluster dynamics and is applicable across various atmospheric conditions. This uncertainty hinders accurate three-dimensional (3-D) modeling of NPF and the subsequent assessment of its environmental and climatic impacts. Here we extensively compare different cluster-dynamics-based parameterizations for SA–DMA nucleation and identify the most reliable one through a combination of box model simulations, 3-D modeling, and in situ observations. Results show that the parameterization derived from Atmospheric Cluster Dynamic Code (ACDC) simulations, incorporating the latest theoretical insights (DLPNO-CCSD(T)/aug-cc-pVTZ//ωB97X-D/6-311++G(3df,3pd) level of theory) and adequate representation of cluster dynamics, exhibits dependable performance in 3-D NPF simulation for both winter and summer conditions in Beijing and shows promise for application in diverse atmospheric conditions. Another ACDC-derived parameterization, replacing the level of theory with RI-CC2/aug-cc-pV(T+d)Z//M06-2X/6–311++G(3df,3pd), also performs well in NPF modeling at relatively low temperatures around 280 K but exhibits limitations at higher temperatures due to inappropriate representation of SA–DMA cluster thermodynamics. Additionally, a previously reported parameterization incorporating simplifications is applicable for simulating NPF in polluted atmospheres but tends to overestimate particle formation rates under conditions of elevated temperature (>∼300 K) and low-condensation sink (<∼3×10 -3 s −1 ). Our findings highlight the applicability of the new ACDC-derived parameterization, which couples the latest SA–DMA nucleation theory and holistic cluster dynamics, in 3-D NPF modeling. The ACDC-derived parameterization framework provides a valuable reference for developing parameterizations for other nucleation systems.

Shen, Jiewen↗
DOE OSTI2022

Toroidal modeling of runaway electron loss due to 3D fields in ITER

Mitigation of runaway electrons (REs) by three-dimensional (3D) magnetic field perturbations is numerically investigated for the ITER 15 MA baseline D–T scenario, utilizing the MARS-F code (Liu et al Phys. Plasmas 7 3681) with a drift orbit test particle tracing module. Considered are two types of 3D fields: the n = 3 (n is the toroidal mode number) resonant magnetic perturbation (RMP) utilized for the purpose of controlling the edge localized modes in ITER, and perturbations generated by the n = 1 magneto-hydrodynamic (MHD) instabilities in a post-disruption plasma. The RMP field, applied to a pre-disruption plasma, is found to be moderately effective in mitigating the RE seeds in ITER when vacuum field model is assumed. Up to ~40% loss fraction is possible at 90 kA-turn coil current. The mitigation efficiency is however substantially reduced, down to less than 5%, when the plasma response is taken into account. This is due to strong screening of the resonant magnetic field components by the plasma response resulting in much less field line stochasticity. On the other hand, the MARS-F modeling, based on the DINA-simulated post-disruption equilibria, shows that the n = 1 resistive kink instabilities develop in these plasmas, as the edge safety factor qa evolves and drops below integer numbers. RE mitigation by these MHD instabilities is sensitive to the eigenmode structure. The best mitigation is achieved as q a drops below 3, when a global kink instability occurs that encompasses both internal and external components. This global instability is found to be capable of mitigating over 80% MeV-level passing RE orbits at a field perturbation |δB|/B 0 that is comparable to that observed in DIII-D experiments, and full mitigation if the perturbation amplitude is doubled. The 'wetted' area on the ITER limiting surface, due to MHD instability induced RE loss, generally increases with the perturbation amplitude (together with increasing loss fraction). At the highest perturbation level assumed in this study, the wetted area reaches ~60% of the total limiting surface area. Lastly, the lost RE orbits mainly strike the outer divertor region of the limiting surface, with some fraction also hitting a wide area along the inboard side of the surface.

3D fields↗
DOE OSTI2020

Development of a Comprehensive Two-Phase Flow Database for the Validation of NEK-2P

Three-dimensional (3-D) two-phase Computational Fluid Dynamics (CFD) codes are emerging as a powerful and potentially practical tool for applications in which detailed local flow information is needed. However, two-phase flow models and associated closure relations are not well established for CFD applications, which is partly due to the lack of high-quality validation data. The main objective of this work is to develop a comprehensive database of two-phase flows that can be used to validate two-phase CFD codes such as NEK-2P. In this project, four advanced local measurement systems, including Particle Image Velocimetry and Planar Laser-Induced Fluorescence (PIV-PLIF), high-speed imaging, x-ray densitometry, and multi-sensor conductivity probe are employed to measure the local two-phase flow parameters of both gas and liquid phases. By combining these techniques, the local void fraction, bubble velocity, interfacial area concentration, bubble frequency, liquid velocity, turbulence intensity, etc., in various two-phase flow regimes can be obtained. These local measurement techniques are first used in a 25.4 mm circular pipe test section. Seven air-water two-phase flow conditions spanning the bubbly, slug, churn-turbulent, and annular flow regimes are measured in this facility. The obtained database contains the radial profiles of both gas- and liquid-phase parameters at three axial locations along the test section. The second facility used in this work contains a 30 mm × 10 mm rectangular test section, in which three two-phase flow and two single-phase flow conditions are measured. Two-dimensional distributions of local two-phase flow parameters in the cross-sectional plane are measured in this facility at three axial locations as well. A facility featuring a 3×3 electrically heated rod bundle is also designed and being constructed in this project. This facility is specially designed for optical measurements and is expected to provide high-quality boiling data in the future. Preliminary analyses have been performed for the data taken in the 25.4 mm circular pipe. Both center-peaked and wall-peaked void fraction profiles have been observed in the data depending on the two-phase flow conditions and/or developing lengths. The 1-D drift-flux model was evaluated with the newly obtained datasets, in which both gas- and liquid-phases data were directly measured. The distribution parameter model has been optimized based on a new void-profile classification method proposed in this study. The optimized drift-flux model shows a significant improvement in predicting both gas velocity and void fraction. The measured liquid-phase turbulence was used to benchmark Sato’s turbulence model considering the bubble-induced shear stress for the three tested bubbly flows. The benchmark results showed good agreement between the PIV measurements and model predictions. In the bubbly flows tested that have low void fractions less than 3%, the effect of the bubble-induced turbulence was found not significant. However, the bubble-induced shear stress becomes important with the increase of the void fraction. The Conjugate Heat Transfer (CHT) model was developed and implemented in NEK-2P. This model allows the coupled simulation of the solid domain and two-phase fluid domain, allowing the specification of realistic boundary conditions. The CHT implementation was verified first with non-boiling simulations. The predicted temperatures in the fluid domain were shown to be identical in simulations with or without the CHT model. The CHT model was then validated through simulations of three Becker benchmark CHF tests performed under both Dryout (DO) and Departure from Nucleate Boiling (DNB) conditions. Reasonably good agreement was obtained between calculated wall temperatures and corresponding experimental data.

42 ENGINEERING↗