Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Compressor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Degree of compression and energy efficiency of a capillary compressor of femtosecond laser pulses

A relation between the degree of pulse compression and energy efficiency is derived for femtosecond laser pulse compressors that utilise spectral broadening of pulses in a gas-filled capillary. We show that the degree of compression has a maximum at an energy efficiency from 15% to 30%. A 15-fold compression of a 290-fs pulse with an energy efficiency of 24% is demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compressor of femtosecond laser pulses based on supercritical xenon

A time compressor of femtosecond laser pulses is developed using supercritical xenon as an active medium. Laser pulses with a duration of 300-fs and an energy of 8 μJ are compressed to 23 fs with an efficiency of 40 %. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compression zone of a magnetoplasma compressor as a source of extreme UV radiation

Results from experimental studies of extreme UV (EUV) radiation from the compression zone of a magnetoplasma compressor (MPC) operating with xenon are presented. Two MPC operating modes that differ in the method of xenon injection into the discharge were studied. It is shown that EUV radiation in the wavelength range of 5-80 nm is emitted from the compression zone. In the MPC operating mode with local xenon injection directly into the compression zone surrounded by helium plasma, the radiation power reaches it peak value of 16-18 kW in the wavelength range of 12.2-15.8 nm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Formation of the compression zone in a plasma flow generated by a magnetoplasma compressor

Processes occurring in a plasma flow generated by a magnetoplasma compressor (MPC) during the formation of the compression zone are discussed. The paper presents results of measurements of the spatial distribution of the electric current in the plasma flow, the temporal and spatial (along the flow) distributions of the plasma density, and the profiles of the velocity of individual flow layers along the system axis. The spatial distribution of the electromagnetic force in the flow is analyzed. It is shown that the plasma flow is decelerated when approaching the compression zone and reaccelerated after passing it. In this case, the plasma flow velocity decreases from ν = (2–3) × 10{sup 7} cm/s at the MPC output to ν < 10{sup 6} cm/s in the region of maximum compression and then again increases to 10{sup 7} cm/s at a distance of 15–17 cm from the MPC output. In some MPC operating modes, a displacement of the magnetic field from the compression zone and the formation of toroidal electric current vortices in the plasma flow after passing the compression zone were detected.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis on Achieving a Minimum Bunch Length in LCLS Bunch Compressor One

An ultra-short bunch is required by different applications in many aspects. In this paper, the condition to achieve a minimum bunch length at the Linac Coherent Light Source (LCLS) [1] bunch compressor one (BC1) is analyzed analytically and evaluated by simulation. The space charge, wake field and coherent synchrotron radiation (CSR) effects are not discussed here.

43 PARTICLE ACCELERATORS↗

Ferroelectric switch for a high-power Ka-band active pulse compressor

Results are presented for design of a high-power microwave switch for operation at 34.3 GHz, intended for use in an active RF pulse compressor. The active element in the switch is a ring of ferroelectric material, whose dielectric constant can be rapidly changed by application of a high-voltage pulse. As envisioned, two of these switches would be built into a pair of delay lines, as in SLED-II at SLAC, so as to allow 30-MW μs-length Ka-band pulses to be compressed in time by a factor-of-9 and multiplied in amplitude to generate 200 MW peak power pulses. Such high-power pulses could be used for testing and evaluation of high-gradient mm-wave accelerator structures, for example. Evaluation of the switch design was carried out with an X-band (11.43 GHz) prototype, built to incorporate all the features required for the Ka-band version.

43 PARTICLE ACCELERATORS↗

Electron-Beam Switches For A High Peak Power Sled-II Pulse Compressor

Omega-P demonstrated triggered electron-beam switches on the L=2 m dual-delay-line X-band pulse compressor at Naval Research Laboratory (NRL). In those experiments, with input pulses of up to 9 MW from the Omega-P/NRL X-band magnicon, output pulses having peak powers of 140-165 MW and durations of 16-20 ns were produced, with record peak power gains M of 18-20. Switch designs are described based on the successful results that should be suitable for use with the existing SLAC SLED-II delay line system, to demonstrate C=9, M=7, and n>>78%, yielding 173ns compressed pulses with peak powers up to 350MW with input of a single 50-MW.

43 PARTICLE ACCELERATORS↗

Clean Energy Integration in Natural Gas Compressor Station Operations

Integrating renewable energy into oil and gas operations could reduce emissions and maximize higher-value use of produced hydrocarbons. In this study, analysts from the Joint Institute for Strategic Energy Analysis (JISEA) and the National Renewable Energy Laboratory (NREL) evaluated clean power technologies for a natural gas compressor station in Texas, using NREL’s REopt tool. Different configurations of distributed energy resources were evaluated based on the technologies available and the load they can satisfy, available land, and hypothetical carbon pricing. The analysis is part of a collaborative program with industry to understand site-specific energy consumption and prices in the oil and gas supply chain and determine under what conditions clean energy options are economically attractive. This work was sponsored by a consortium including Kinder Morgan, Interstate Natural Gas Association of America Foundation, Extraction Oil & Gas, Baker Hughes, and ConocoPhillips.

03 NATURAL GAS↗

Foil Bearing Supported Compressor-Expander

R&D Dynamics Corporation (RDD) is developing a fuel cell system compressor-expander designed for heavy-duty vehicle applications. The system emphasizes high reliability, versatility, long service life, and cost-effective mass production. Its design integrates a high-speed centrifugal compressor/expander, oil-free foil air/gas bearings, a direct current permanent magnet (DCPM) motor, and an inverter utilizing silicon carbide (SiC) switches. Key advantages include high efficiency, compact size and reduced weight, enhanced reliability, and elimination of oil contamination risks. The technology targets multiple sectors such as long-haul semi-trucks, mining and construction equipment, power generation, data centers, marine systems, and other heavy machinery. Evaluation units are ready for shipment, and manufacturing capabilities are currently being developed. Contract Number: DE-EE0009617 (2021).

30 DIRECT ENERGY CONVERSION↗

Methane Mitigation Using Linear Motor Leak Recovery Compressor

GTI Energy (GTI), in collaboration with The University of Texas at Austin - Center for Electromechanics (UT‑CEM), designed, fabricated, and tested a linear motor–driven compressor intended to mitigate methane emissions at natural gas facilities across transmission, storage, gathering, and processing sectors of the gas value chain.

02 PETROLEUM↗

Automated Belt Grinding of Axial-Compressor Blades in Gas-Turbine Engines

The finishing of the flow sections of compressor blades is considered. A sequence of operations for this purpose in an automated cycle is proposed. The development of control programs for the grinding of flow sections of the blades is discussed, with allowance for the nonuniform distribution of the margin over the blade surface.

42 ENGINEERING↗

Design of Accumulator and Compressor Rings for the Project-X Based Proton Driver

A Muon Collider (MC) and a Neutrino Factory (NF) - which may be considered as a step towards a MC - both require a high-power ({approx}4 MW) proton driver providing short (<1 m r.m.s. length) bunches for muon production. However, the driver repetition rates required for these two machines are different: {approx}15 Hz for MC and {approx}60 Hz for NF. This difference suggests employing two separate rings: one for accumulation of the proton beam from the Project-X linac in a few (e.g. 4) long bunches, the other for bunch compression - one by one for NF or all at a time for MC with simultaneous delivery to the target. The lattice requirements for these two rings are different: the momentum compaction factor in the accumulator ring should be large (and possibly negative) to avoid the microwave instability, while the compressor ring can be nearly isochronous in order to limit the required RF voltage and reduce the dispersion contribution to the beam size. In the present report we consider ring lattice designs which achieve these goals.

43 PARTICLE ACCELERATORS↗

Centrifugal Compressors

The article discusses small high speed centrifugal compressors. This topic was covered in a previous ASHRAE Journal column (2003). This article reviews another configuration which has become an established product. The operation, energy savings and market potential of this offering are addressed as well.

ASHRAE↗

Clean Energy in Oil & Gas Consortium: Compressor Station Case Study

JISEA conducted analysis of technical and economic potential of incorporating low-emissions energy sources into various oil and gas operations in different locations to assist the oil and gas industry with decision-making. The case study analysis presented here evaluated renewable energy opportunities at an all-electric compressor station located in Texas.

Baker Hughes↗

Dynamics of Longitudinal Phase-Space Modulations in an rf Compressor for Electron Beams

Free Electron Lasers (FELs) operating in the UV or x-ray radiation spectrum require peak beam currents that are generally higher than those obtainable by present electron sources, thus making bunch compression necessary. Compression, however, may heighten the effects of collective forces and degrade the beam quality. In this paper they provide a framework for investigating some of these effects in rf compressors by focusing on the longitudinal dynamics of small-amplitude density perturbations, which have the potential to cause the disruptive appearance of the so-called microbunching instability. They develop a linear theory valid for low-to-moderate compression factors under the assumption of a 1D impedance model of longitudinal space charge and provide validation against macroparticle simulations.

43 PARTICLE ACCELERATORS↗