Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Catalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Identification and Catalysis of the Potential-Limiting Step in Lithium-Sulfur Batteries

The Li-S chemistry is thermodynamically promising for high-density energy storage but kinetically challenging. Over the past few years, many catalyst materials have been developed to improve the performance of Li-S batteries and their catalytic role has been increasingly accepted. However, the classic catalytic behavior, i.e., reduction of reaction barrier, has not been clearly observed. Crucial mechanistic questions, including what specific step is limiting the reaction rate, whether/how it can be catalyzed, and how the catalysis is sustained after the catalyst surface is covered by solid products, remain unanswered. Herein, we report the first identification of the potential-limiting step of Li-S batteries operating under lean electrolyte conditions and its catalysis that conforms to classic catalysis principles, where the catalyst lowers the kinetic barrier of the potential-limiting step and accelerates the reaction without affecting the product composition. After carefully examining the electrochemistry under lean electrolyte conditions, we update the pathway of the Li-S battery reaction: S 8 solid is first reduced to Li 2 S 8 and Li 2 S 4 molecular species sequentially; the following reduction of Li 2 S 4 to a Li 2 S 2 -Li 2 S solid with an almost constant ratio of 1:4 is the potential-limiting step; the previously believed Li 2 S 2 -to-Li 2 S solid-solid conversion does not occur; the recharging reaction is relatively fast. We further demonstrate that supported cobalt phthalocyanine molecules can effectively catalyze the potential-limiting step. After Li 2 S 2 /Li 2 S buries the active sites, it can self-catalyze the reaction and continue driving the discharging process.

25 ENERGY STORAGE↗
DOE OSTI2024

Remote-Contact Catalysis for Target-Diameter Semiconducting Carbon Nanotube Arrays

Electrostatic catalysis has been an exciting development in chemical synthesis (beyond enzymes catalysis1 ) in recent years, boosting reaction rates and selectively producing certain reaction products2 . Most of the studies to date have been focused on using external electric field (EEF) to rearrange the charge distribution in small molecule reactions such as Diels-Alder addition3 , carbene reaction4 , etc. However, in order for these EEFs to be effective, a field on the order of 1 V/nm (10 MV/cm) is required, and the direction of the EEF has to be aligned with the reaction axis5 . Such a large and oriented EEF will be challenging for large-scale implementation, or materials growth with multiple reaction axis or steps. Here, we demonstrate that the energy band at the tip of an individual single-walled carbon nanotube6 (SWCNT) can be spontaneously shifted in a high-permittivity growth environment, with its other end in contact with a low-work function electrode (e.g., hafnium carbide or titanium carbide7 ). By adjusting the Fermi level at a point where there is a substantial disparity in the density of states (DOS) between semiconducting (s-) and metallic (m-) SWCNTs8 , we achieve effective electrostatic catalysis for s-SWCNT growth assisted by a weak EEF perturbation (200V/cm). This approach enables the production of high-purity (99.92%) s-SWCNT horizontal arrays with narrow diameter distribution (0.95±0.04 nm), targeting the requirement of advanced SWCNT-based electronics for future computing9-11. These findings highlight the potential of electrostatic catalysis in precise materials growth, especially for s-SWCNTs, and pave the way for the development of advanced SWCNT-based electronics12.

Wang, Jiangtao↗
DOE OSTI2025

Spin-State and Reorganization Energy Considerations for Metal-Centered Photoredox Catalysis

Transition-metal complexes featuring metal-centered excited states have recently emerged as mechanistically distinct platforms for selective photochemistry, including photoredox catalysis. Among these, Co(III) complexes have demonstrated productive photoinduced electron transfer via the 3 T 1 metal-centered state. In contrast, photoreactivity from the 5 T 2 metal-centered state in Fe(II) polypyridyl complexes remains limited. Building on our prior report concerning reactivity associated with the 5 T 2 state in [Fe(tren(py) 3 )] 2+ (tren(py) 3 = tris(2-pyridylmethyliminoethyl)-amine), we introduced stronger-field ligands in an effort to increase excited-state energies of Fe(II) polypyridyl complexes and enhance reactivity. Despite achieving nanosecond-scale excited-state lifetimes and favorable thermodynamic driving forces, no photoreactivity was observed. Reinvestigation of the observations previously reported for [Fe(tren(py) 3 )] 2+ revealed interactions between the metal complex and the substrate in their respective ground states that mimicked dynamic quenching of the chromophore, prompting a reassessment of mechanistic considerations inherent in leveraging reductive chemistry from the 5 T 2 excited state of Fe(II). Our analysis indicates that electron transfer from the 5 T 2 excited state of a low-spin d6 metal is subject to significant barriers both in terms of reorganization energies and spin conservation that undermines its ability to act as an electron donor for photoredox catalysis. In contrast, ligand fields that are sufficient to stabilize the 3 T 1 excited state have available to them numerous spin-allowed and, in certain cases, near-barrierless pathways to engage in excited-state electron transfer (both oxidative and reductive depending on the identity of the metal). These results highlight the critical role of spin-state changes and their associated reorganization energy requirements in metal-centered photoredox catalysis.

charge transfer↗
DOE OSTI2024

Zn 2+ -mediated catalysis for fast-charging aqueous Zn-ion batteries

Rechargeable aqueous zinc-ion batteries (AZIBs), renowned for their safety, high energy density and rapid charging, are prime choices for grid-scale energy storage. Historically, ion-shuttling models centring on ion-migration behaviour have dominated explanations for charge/discharge processes in aqueous batteries, like classical ion insertion/extraction and pseudocapacitance mechanisms. However, these models struggle to account for the exceptional performance of AZIBs compared to other aqueous metal-ion batteries. Here, in this study, we present a catalysis model elucidating the Zn 2+ anomaly in aqueous batteries, explaining it through the concept of adsorption in catalysis. Such behaviour can serve the charge/discharge role, predominantly dictated by solvated metal cations and cathode materials. First-principles calculations suggest optimal adsorption/desorption behaviour (water dissociation process) with the Zn 2+ -vanadium nitride (VN) combination. Experimentally, AZIBs implementing VN cathodes demonstrate fast-charging kinetics, showing a capacity of 577.1 mAh g -1 at a current density of 300,000 mA g -1 . The grasp of catalysis steps within AZIBs can drive solutions beyond state-of-the-art fast-charging batteries.

25 ENERGY STORAGE↗
DOE OSTI2018

Acid–base catalysis over perovskites: a review

We present that perovskite catalysts have been extensively studied for reduction–oxidation (redox) reactions; however, their acid–base catalytic properties are still under-explored. This review collects work aiming to study the acid–base catalytic properties of perovskites. Reports regarding combined acid–base/redox catalysis over perovskites lie beyond the scope of the present review. For the characterization of acid–base properties, researchers have studied the interaction of probe molecules with perovskite surfaces by means of multiple techniques that provide information about the density, strength and type of adsorption sites. The top-surface composition of perovskites, which relates to the abundance of the acid–base sites, has been studied by means of low energy ion scattering (LEIS), and, the less surface sensitive, conventional X-ray photoelectron spectroscopy (XPS). Probe reactions, with the conversion of 2-propanol as the common choice, have also been employed for characterizing the acid–base catalytic properties of perovskites. The complex nature of perovskite surfaces, which explains the still absent fundamental relations between the structure of the catalyst and reaction rates/selectivity, encounters a great challenge due to the surface reconstruction of these materials. In this review, we devote a special section to highlight recent publications that report the impact of surface reconstruction and particle shape on acid–base catalysis over perovskites. In addition, we review promising catalytic performances of perovskite catalysts for other reactions of interest. Challenges in acid–base catalysis over perovskites focus on the development of time-resolved monolayer-sensitive characterization of surfaces under operando conditions and the discernment of combined acid–base/redox reaction mechanisms. Finally, opportunities lay on tuning the acid–base characteristics of perovskites with computation-based catalytic descriptors to achieve desired selectivities and enhanced rates.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Compartmentalisation of molecular catalysts for nonorthogonal tandem catalysis

The development of nonorthogonal tandem catalysis enables the use of a combination of arbitrary catalysts to rapidly synthesize complex products in a substainable, efficient, and timely manner. The key is to compartmentalise the molecular catalysts, thereby overcoming inherent incompatibilities between individual catalysts or reaction conditions. This tutorial review analyses the development of the past two decades in the field of nonorthogonal tandem catalysis with an emphasis on compartmentalisation strategies. Here, we highlight design principles of functional materials for compartmentalisation and suggest future directions in the field of nonorthogonal tandem catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Synchrotron Catalysis Consortium (SCC) at NSLS-II: Dedicated Beamline Facilities for In Situ and Operando Characterization of Catalysts

The Synchrotron Catalysis Consortium (SCC) was funded and established in September 2005 at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory (BNL). For more than a decade, the SCC was the first of its kind in the United States, with a mission to promote the utilization of synchrotron techniques for cutting-edge catalysis research under in-situ conditions. The consortium consists of three Principal Investigators (Jingguang Chen, Columbia University, Anatoly Frenkel, Stony Brook University/BNL, and Jose Rodriguez, BNL) and scientific staff member Nebojsa Marinkovic. The initial team also included Radoslav Adzic, BNL, and collaborators from academic, national, and industrial laboratories. During the first decade of its operations at three NSLS beamlines (X18A, X18B, and X19A) until the closing of NSLS on September 30, 2014, the primary goal of the SCC team was to provide assistance and to develop new sciences/techniques to the catalysis community...This report outlines a brief history, specifications, techniques, and training and outreach for the facility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

The impact of transition metal catalysts on macroscopic dielectric barrier discharge (DBD) characteristics in an ammonia synthesis plasma catalysis reactor

When non-equilibrium, low-temperature plasmas and catalysts interact, they can exhibit synergistic behavior that enhances the chemical activity above what is possible with either process alone. Unlike thermal catalysis, in plasma-assisted catalysis the non-equilibrium state of the plasma produces reactive intermediates, such as excited species, that may play an important role in the catalytic process. There are two primary plasma-surface mechanisms that could produce this synergy: the effect of the plasma on the catalyst (e.g. enhanced adsorption/reaction of plasma-activated species, change of surface structure/morphology, hot spots, etc) and the effect of the catalyst on the plasma state. This work focuses on the latter. We use a laboratory-scale, packed bed, dielectric barrier discharge (DBD) reactor to observe the influence of multiple alumina (Al 2 O 3 3 ) synthesis catalysts on the plasma electrical and optical properties. We find that while the rates of ammonia synthesis over the materials considered, including Fe/Al 2 O 3 , Ni/Al 2 O 3 , and Co/Al 2 O 3 , are different, the macroscopic properties of the DBD are statistically indistinguishable. These results support the argument that the observed synergy in our catalysis experiments is not due to the catalyst modifying the characteristics of the plasma itself, but rather arises from differences in how the plasma environment and plasma-generated species modify chemistry at the catalyst surface, although the specific mechanism is still an outstanding question.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Conformational ensembles reveal the origins of serine protease catalysis

Enzymes exist in ensembles of states that encode the energetics underlying their catalysis. Conformational ensembles built from 1231 structures of 17 serine proteases revealed atomic-level changes across their reaction states. By comparing the enzymatic and solution reaction, we identified molecular features that provide catalysis and quantified their energetic contributions to catalysis. Serine proteases precisely position their reactants in destabilized conformers, creating a downhill energetic gradient that selectively favors the motions required for reaction while limiting off-pathway conformational states. The same catalytic features have repeatedly evolved in proteases and additional enzymes across multiple distinct structural folds. In conclusion, our ensemble-function analyses revealed previously unknown catalytic features, provided quantitative models based on simple physical and chemical principles, and identified motifs recurrent in nature that may inspire enzyme design.

Du, Siyuan [Stanford Univ., CA (United States)] (O↗
DOE OSTI2015

The Catalysis of Uniform Metal Nanoparticles Deposited onto Oxide Supports: The Components of a Catalyst that Control Activity and Selectivity

Model materials consisting of metal nanoparticles loaded onto oxide supports were synthesized, characterized, and investigated in a number of catalytic chemical reactions. By varying the size, shape, and composition of nanoparticle, as well as the material used to support the nanoparticles, it was found that small changes to the catalyst can have enormous changes to the reaction activity and selectivity. Investigation of these carefully synthesized catalysts via in situ characterization, and reaction studies, leads to a deeper understanding of the molecular level parameters that govern catalysis. Through study of the properties of the nanoparticles it was discovered that nanoparticle size and shape have a dominant role in the chemoselective catalysis of furfural over platinum nanoparticles. When vapor phase furfural and hydrogen gas were passed over Pt nanoparticles ranging in size from 1.5 to 7.1 nm, the catalytic selectivity was found to be dominated by the size of the nanoparticle. Large nanoparticles promoted hydrogenation of furfural to furfuryl alcohol, while smaller nanoparticles favored decarbonylation to furan. The same size specific selectivity was found in the hydrogenative reforming (the transformation of hydrocarbons to branched isomers) of C6 hydrocarbons, in which Pt nanoparticle size controls isomerization selectivity. Methylcyclopentane was found to be extremely size dependent at lower temperatures (553 K). It was found that smaller sized nanoparticles favored isomer formation, while larger sizes catalyzed the aromatization reaction more efficiently. n-hexane was found to be much less dependent on particle size, but still showed an increase in isomerization with small particles over larger sized Pt nanoparticles. The composition of PtxRh1-x bimetallic nanoparticles was also studied. These catalysts were characterized under hexane reforming conditions with Ambient Pressure X-ray Photoelectron Spectroscopy (AP-XPS), in order to find the actual surface atomic composition under real catalytic working conditions. By using AP-XPS and catalytic data in tandem, it was found that an optimum Rh loading occurred when the surface ensemble statistically favored one Rh atom surrounded by Pt atoms. By utilizing different oxide materials for catalytic supports the flow of charge can play a role in the reaction at the surface or interface in a phenomenon known as the strong metal-support interaction (SMSI). When Pt nanoparticles were loaded onto mesoporous supports made of Co3O4, NiO, MnO2, Fe2O3, and CeO2 it was found that their activity for carbon monoxide oxidation was greatly enhanced relative to the support alone or Pt loaded onto inert mesoporous silica. This finding demonstrates that the interface of the metallic Pt nanoparticle and the oxide 2 support is able to produce turnovers that are orders of magnitude higher than the two materials separately. When the same type of experiments were investigated with n-hexane as the reactant and macroporous Al2O3, TiO2, Nb2O5, Ta2O5, and ZrO2 were utilized as supports, it was found that the reaction selectivity was greatly altered depending on the catalytic support material. TiO2, Nb2O5, and Ta2O5 (all of which are strong Lewis acids) were found to be much more selective for isomer production than the standard SiO2 mesoporous silica supported Pt nanoparticle catalyst. Finally, an acidified mesoporous silica material was utilized as the support. This material was synthesized by using AlCl3 to modify the surface of mesoporous silica. This support was found to have no activity for hexane isomerization alone. However, when Pt nanoparticles were supported on the material, the activity and isomer selectivity in hexane reforming was increased several orders of magnitude as compared to the same nanoparticles supported on unmodified mesoporous silica. This dissertation builds on the existing knowledge of known concepts in catalysis science such as structure sensitive reactions, the metal-support interaction, and acid-base chemistry. The results show how small changes in the active sites of a catalyst can create large changes in the catalytic chemistry. This research demonstrates how careful material control, characterization and reaction study can help to elucidate the molecular level components necessary to design efficient catalysts.

Musselwhite, Nathan↗
DOE OSTI2017

Basic Research Needs for Catalysis Science

Catalysis is the core of modern chemical conversions—the production processes for the vast majority of our fuels and chemicals use catalysts. Solid and molecular catalysts increase chemical transformation rates (reactivity) by lowering energy barriers for chemical reactions and can increase the yield of desired products (selectivity) by controlling the relative rates of competing reactions. High catalytic reactivity and selectivity reduce the required energy input, the number of process steps, and unwanted byproducts in the overall catalytic conversion. New catalysts will enable more efficient chemical transformations of raw materials and interconversion of the energy stored in chemical bonds with thermal and electrical energy. Advancing our understanding of and ability to control catalyzed reactions is essential to ensure the long-term economic viability of the energy and chemical industries. Over the past decade, advances in the characterization of working catalysts, theory and computation, and high-precision chemical and materials synthesis have enabled impressive progress in catalysis science. This progress has provided detailed insight into how reactions occur and has led to increased appreciation of the intrinsic complexity of catalytic processes. Understanding this complexity has further enabled advances in areas as diverse as high-temperature transformation of hydrocarbons, low-temperature conversion of highly functionalized bio-derived compounds, highly selective synthesis of complex molecules, and improved electrochemical processes. By integrating the knowledge gained from studies of homogeneous, heterogeneous, and biological catalysts, we are beginning to understand and take advantage of the remarkably diverse capabilities of catalysts based on multifunctional molecular complexes, functionalized porous materials, and stabilized nanostructures and single atoms. A Basic Research Needs workshop held in May 2017 identified five Priority Research Directions that address complexity in catalysis science. This emerging and transformative approach will lead to catalysts with unprecedented reactivity and selectivity for use in critical energy and chemical technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Basic Research Needs for Catalysis Science to Transform Energy Technologies: Report from the U.S. Department of Energy, Office of Basic Energy Sciences Workshop May 8–10, 2017, in Gaithersburg, Maryland

Energy technologies affect virtually every aspect of life in modern societies—including transportation, utilities, agriculture, medicine, and the availability of a myriad of consumer products—and depend on human ability to accelerate and to guide chemical transformations. Controlling these transformations, which occur in the microscopic world of atoms and molecules, forms the basis of countless technologies such as production of fuels, fertilizers, plastics, pharmaceuticals and much more. At the very core of these chemical transformations are catalysts—specialized and often highly complex types of matter that allow chemical reactions to occur rapidly and produce specific products. Catalysts also have the remarkable ability to perform their tasks millions of times without themselves being consumed. The discovery of inexpensive and widely-deployable energy and chemical technologies, and their underpinning catalysis science, is critical to ensure the economic viability of U.S. energy and chemical industries. Over the past decade, remarkable new tools have been discovered that allow the observation of catalytic transformations in exquisite detail, and assembly of novel and elaborate catalytic architectures with atomic precision. Furthermore, increasingly sophisticated theoretical and computational tools allow understanding of the essential details of the catalytic processes, and this overall progress has led to the discovery of catalysts with superior performance and the associated economic benefit. In the next decade and beyond, science promises to revolutionize how catalysts and catalytic processes are designed, to enable the introduction of new energy resources, to provide routes to sustainable synthesis of chemicals and other valuable materials, and to create novel approaches to chemical energy storage. This report is the result of the Basic Energy Sciences Workshop on Basic Research Needs for Catalysis Science to Transform Energy Technologies that was held in May 2017, and was attended by more than 100 leading national and international scientific experts. The attendees were organized into four panels: 1. Diversified Energy Feedstocks and Carriers, 2. Novel Approaches to Energy Transformations, 3. Advanced Chemical Conversion Approaches, and 4. Crosscutting Capabilities and Challenges: Synthesis, Theory, and Characterization. The workshop identified five priority research directions (PRDs) that are aimed at harnessing complexity in catalysis to create next-generation energy technologies and realizing efficient catalytic processes to increase the diversity of resources for production of chemicals and energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Effect of variable surface catalysis on heating near the stagnation point of a blunt body

This paper describes arc-jet data obtained on the performance of glass coated thermal protection systems in a convectively heated environment. These data confirm earlier flight and arc-jet data that show an increased surface catalysis with salt contamination and a decreased surface catalysis near the softening point temperature of the glass. In addition, surface temperature distributions along sphere-cones with abruptly changing surface catalysis were measured near the stagnation point and compared well with computations using a reacting boundary layer code.

Stewart, D. A.↗
NASA NTRS1984

Model studies in catalysis with uhv-deposited metal particles and clusters

Small supported metal particles have become a popular area of intense research interest, and important contributions to the considered problems are being made from the fields of uhv technology, thin film physics surface science, and surface and thin film instrumentation. Attention is given to insulating supports, particulate metal deposits and their properties, metal/support interactions and gas exposures, and integrated experimental approaches. It is concluded that major contributions to the field of model catalysis should be forthcoming in the near future from uhv-based methods of research. Catalysis and catalysis-related problem areas expected to benefit from advanced model studies include catalyst preparation processing, sintering mechanisms for metals and alloys, separation of initial and final state effects for supported clusters, and the influence of particle and/or support morphologies.

Poppa, H.↗
NASA NTRS1989

Cosmic strings and baryon decay catalysis

Cosmic strings, like monopoles, can catalyze proton decay. For integer charged fermions, the cross section for catalysis is not amplified, unlike in the case of monopoles. The catalysis processes are reviewed both in the free quark and skyrmion pictures and the implications for baryogenesis are discussed. A computation of the cross section for monopole catalyzed skyrmion decay is presented using classical physics. Also discussed are some effects which can screen catalysis processes.

Gregory, Ruth↗
NASA NTRS1991

Catalysis and biocatalysis program

The annual report presents the fiscal year (FY) 1990 research activities and accomplishments for the Catalysis and Biocatalysis Program of the Advanced Industrial Concepts Division (AICD), Office of Industrial Technologies of the Department of Energy (DOE). The mission of the AICD is to create a balanced program of high risk, long term, directed interdisciplinary research and development that will improve energy efficiency and enhance fuel flexibility in the industrial sector. The Catalysis and Biocatalysis Program's technical activities were organized into five work elements: the Molecular Modeling and Catalysis by Design element; the Applied Microbiology and Genetics element; the Bioprocess Engineering element; the Separations and Novel Chemical Processes element; and the Process Design and Analysis element.

Source record↗
NASA NTRS1993

Catalysis and biocatalysis program

This final report presents a summary of research activities and accomplishments for the Catalysis and Biocatalysis Program, which was renamed the Biological and Chemical Technologies Research (BCTR) Program, currently of the Advanced Industrial Concepts Division (AICD), Office of Industrial Technologies of the Department of Energy (DOE). The Program was formerly under the Division of Energy Conversion and Utilization Technologies (ECUT) until the DOE reorganization in April, 1990. The goals of the BCTR Program are consistent with the initial ECUT goals, but represent an increased effort toward advances in chemical and biological technology transfer. In addition, the transition reflects a need for the BCTR Program to assume a greater R&D role in chemical catalysis as well as a need to position itself for a more encompassing involvement in a broader range of biological and chemical technology research. The mission of the AICD is to create a balanced Program of high risk, long-term, directed interdisciplinary research and development that will improve energy efficiency and enhance fuel flexibility in the industrial sector. Under AICD, the DOE Catalysis and Biocatalysis Program sponsors research and development in furthering industrial biotechnology applications and promotes the integrated participation of universities, industrial companies, and government research laboratories.

Ingham, J. D.↗
NASA NTRS2001

Catalysis in the 3rd Dimension: How Organic Molecules May be Formed

Catalysis is often little more than a word to phenomenologically describe the fact that a reaction follows a pat1 that leads to products of an unexpected kind or of unexpected yield. Low activation energy barriers for intermediates are recognized as the most likely cause why a system deviates from the thermodynamic pull towards minimizing its free energy and ends up in a metastable state. Seldom is the mechanism known. This i: particularly true for heterogeneous catalysis under hydrothermal conditions with minerals as catalysts. It is commonly assumed that catalytic action takes place across solid-fluid interfaces and that, on the atomic level, interfaces are just 2-dimensional contacts. This makes it difficult to understand, for instance, the assembly of long-chain carboxylic (fatty) acids. 3y studying single crystals that grew from a melt in the presence of H2O and CO2, we can show: (1) that numerals take up the fluid components into solid solution, (2) that some-thing happens converting them to -educedH and C, (3) that C atoms segregate into dislocations and tie C-C bonds. The products are medium-to-long chain Cn protomolecules, with some C-H attached, pre-assembled in the dislocations. Upon solvent extraction, these proto-molecules turn into carboxylic and dicarboxylic acids. This observation suggests that, in a very elementary step, catalysis under hydrothermal conditions leading to fatty acids involves the pre-assembly of Cn entities in the interface that is not 2-D but extends into the 3rd dimension, with dislocations as synthesis sites.

Freund, Friedemann↗