Hot-pressing mixed carbides of ta, hf, and zr.
Effect of hot pressing temperature, pressure and time on the resulting density of mixed carbides of tantalum, hafnium and zirconium
CARBIDE↗
SEARCH · Engineering Papers
Results for “Carbides”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Reactive Carbide‐Based Synthesis and Microstructure of NASICON Sodium Metal All Solid‐State Electrolyte
Reactive carbide precursor-based synthesis of NASICON-type NZSP (Na 1+x Zr 2 Si x P 3-x O 12 ) solid-state electrolyte (SSE) is demonstrated, in contrast to the established oxide-based approach. Exothermic decomposition of ZrC and SiC in air homogenizes microstructure, yielding 98% compact density after conventional sintering at 1200 °C. Quantitative stereology demonstrates that significant microstructural differences are present. Compacts of carbide-derived Carb-NZSP are 98% dense with a secondary zirconium oxide (ZrO 2 ) volume fraction of 0.2% ± 0.3%, versus 93% dense and 3% ± 1% for oxide-derived baseline. For Carb-NZSP, the secondary glassy phosphate phase is agglomerated, while for baseline, it is dispersed and percolated. Electrochemical testing combined with post-mortem analysis demonstrates how microstructural control of secondary phases is critical for dendrite suppression: Carb-NZSP critical current density (CCD) is 3.1 ± 0.8 mA cm −2 at 0.1 mAh cm −2 , versus 1.0 ± 0.7 mA cm −2 at 0.1 mAh cm −2 . Cryogenic focused ion beam (cryo-FIB) analysis demonstrates that in both materials, the porous 2D sheet-like sodium metal dendrites propagate around and subsume NZSP grains, likely following a path enriched with glassy phase and with porosity. Dendrites also flow around isolated zirconia particles. Phase field simulation reveals deflection of dendrites by mechanically tough zirconia, while brittle glassy phase accelerates dendrite growth, especially when finely distributed.
36 MATERIALS SCIENCE↗
Effects of substrate bias and tilt on magnetron sputtered boron carbide films
Maintaining high density and good mechanical properties at oblique angles for magnetron sputtered amorphous boron carbide films remains a challenge. In this study, we investigate the effect of the substrate bias on density, residual stress, mechanical properties, and morphology of boron carbide films deposited via direct current magnetron sputtering with a full-face erosion magnetron source in a mixed Ar-Ne plasma. Results show that films deposited at oblique substrate tilt angles on substrates biased at -50 V possess significantly lower oxygen content, superior mechanical properties, and higher density compared to their electrically grounded counterparts. In conclusion, these enhancements observed at oblique angles, while promising, come at the cost of larger residual compressive stress and higher Ne incorporation in films.
Materials science↗
Laser-induced slip casting as an additive manufacturing approach for silicon carbide
Here, this work presents processing silicon carbide (SiC) with the laser-induced slip casting (LIS) additive manufacturing (AM). SiC was stabilized in water with polyethyleneimine (PEI) dispersant, and SiC slurries were made with rheology for LIS printing. High-density ceramic parts were printed, followed by single-step binder burnout and sintering. The printed parts achieved 93–95 % of theoretical density. X-ray computed tomography (XCT) revealed a small distribution of flaws exceeding 100 microns. The mechanical properties were measured in both parallel and perpendicular to the printing layers, and the orientation with layers perpendicular to the bending moment resulted in higher strength compared to the parallel direction. Porosity resulting from processing and large inclusions of boron carbide (B4C) were the root cause of failure in the measured samples. Despite these defects through this effort, this new approach demonstrates promise for green forming of SiC with densities greater than 95 % theoretical and tensile strengths above 250 MPa.
Additive Manufacturing↗
Thin-Film Stabilization and Magnetism of η -Carbide-Type Iron Nitrides
Transition-metal nitrides in ..eta..-carbide-type structures exhibit unusual bonding motifs and proximity to magnetic instabilities. Yet they remain unexplored in thin-film form due to the difficulty of stabilizing nitrogen-poor ternaries among competing phases. Here, we report the thin-film synthesis and phase-stability mapping of the ..eta..-nitride systems Fe-W-N and Fe-Mo-N. Amorphous Fe-M-N (M = W, Mo) combinatorial libraries deposited by reactive cosputtering crystallize upon rapid thermal annealing, enabling systematic identification of synthesis windows as a function of composition and annealing temperature. Using laboratory powder X-ray diffraction and synchrotron grazing incidence wide-angle X-ray scattering, we establish that Fe 3 Mo 3 N-based ..eta..-carbide phases form over a substantially broader compositional and thermal range than W-based compositions, where ..eta.. structures are stabilized only when the films are Fe-rich. These trends are rationalized using mixed chemical-potential vs composition phase diagrams that capture the narrow nitrogen chemical-potential stability of ..eta..-nitrides. Magnetic measurements reveal that ferromagnetism is induced in Fe-rich Fe 3.54 Mo 2.46 N with a small exchange-bias-like response that is absent in Fe 3 W 3 N-based compositions, highlighting the sensitivity of magnetic behavior to modest deviations from stoichiometry. This work establishes practical thin-film synthesis routes for ..eta..-nitride materials and demonstrates how composition can be tuned to access emergent magnetic phenomena in these complex nitrides.
36 MATERIALS SCIENCE↗
Intrinsically Bifunctional and Tunable Tungsten Carbide Catalysts Enable Efficient PVC-Compatible Polyolefin Hydrocracking
Hydrocracking is a promising route for the chemical recycling of polyolefins (PO), converting them into short hydrocarbons over bifunctional catalysts with metal sites for hydrogenation and dehydrogenation, and Brønsted acid sites (BAS) for isomerization and C–C bond cleavage. However, PO feedstocks containing polyvinyl chloride (PVC) can release chlorine (Cl) under reaction conditions, deactivating conventional noble metal/zeolite catalysts. Moreover, the lack of site intimacy and the presence of micropores within conventional catalysts create challenges around the transport of high-molecular-weight, sterically encumbered polymer intermediates. Here, in this study, we report tungsten carbides (W x C) as a novel type of bifunctional catalysts that address these challenges. W/W 2 C phases on W x C offer “metal” sites, and −OH on WO x species introduces BAS in close proximity. The “metal”:BAS ratio can be tuned through carburization temperature, leading to a volcano-shaped activity trend reflecting the requirement for metal–BAS balance. Kinetic data demonstrate that each PO chain undergoes sequential cleavage, while trends in cracking ideality and selectivity follow those in short-alkane hydrocracking. On the per-BAS basis, W x C is more efficient than conventional bifunctional catalysts by more than an order of magnitude, due to enhanced polymer transport. They maintain or show increased activity with 10 wt % PVC in the substrate. This work establishes transition-metal carbides as earth-abundant bifunctional catalysts with unique site proximity and heteroatom compatibility. These features, along with the broad structure space for rational tuning, make them promising options to tackle specific challenges that polymer feedstocks present in hydrocracking.
Nwachukwu, Uchenna C. [Univ. of Akron, OH (United ↗
Experimental and computational studies on high-entropy carbide MoNbTaVWC 5 under high pressures
High-entropy carbide, MoNbTaVWC 5 , was synthesized from oxide precursors of the constituent metals, mixed with graphite powder in a microwave-generated hydrogen plasma at 26.66 kPa and 2100 °C. Ambient x-ray diffraction analysis confirms the full conversion of oxide precursors into a single-phase, face-centered cubic structure with a lattice parameter a = 4.3309 Å. Nanoindentation measured a hardness of 24.5 ± 1.3 GPa and an elastic modulus of 386 ± 22 GPa. The synthesized sample, mixed with a copper pressure marker, was studied by the radial x-ray diffraction technique with beryllium gasketing in a diamond anvil cell up to 70 GPa. The experimentally measured pressure–volume curve and shear strength were compared with theoretical predictions using the special quasi-random structure technique and density functional theory. MoNbTaVWC 5 achieved a 12% volume compression at 70 GPa and exhibited a high shear strength of 6.6 GPa. The present study demonstrates that the high-entropy carbide MoNbTaVWC 5 exhibits exceptional incompressibility and high strength under extreme conditions.
36 MATERIALS SCIENCE↗
Upgrading biocrude oil into sustainable aviation fuel using zeolite-supported iron-molybdenum carbide nanocatalysts
Food waste is an underdeveloped source for production of sustainable aviation fuel (SAF). Now, there is no certified conversion process of food waste for SAF by American Society for Testing and Materials (ASTM). We report the use of zeolite-supported molybdenum carbide nanocatalysts in upgrading biocrudes, produced from food wastes through HTL, into SAF precursors. Our data show a complete removal of oxygen from the biocrude through hydrodeoxygenation and a higher heating value of 46.5 MJ/kg, which is comparable to that of Jet A (46.1 MJ/kg). The prescreening tests (tier alpha and beta) show the average carbon number of the distillation cut (150° to 230°C) of upgraded fuel is 10.6, close to the value of 11.4 for average conventional jet fuel, and the specifications of properties including surface tension, viscosity, heating value, flash point, and freezing point were found to meet the standards of SAF. The metal carbide nanocatalysts were reusable in upgrading tests, and the activity of deoxygenation was retained.
10 SYNTHETIC FUELS↗
Order-to-disorder transition due to entropy in layered and 2D carbides
In compositionally complex materials, there is controversy on the effect of enthalpy versus entropy on the structure and short-range ordering in so-called high-entropy materials. Here, to help address this controversy, we synthesized and probed 40 M 4 AlC 3 layered carbide phases containing two to nine metals and found that short-range ordering from enthalpy was present until the entropy increased enough to achieve complete disordering of the transition metals in their atomic planes. We transformed all of these layered carbide phases into two-dimensional (2D) sheets and showed the effects of the order versus disorder on their surface properties and electronic behavior. This study suggests the key effect that the competition between enthalpy and entropy has on short-range order in multicompositional materials.
Wyatt, Brian C. [Purdue Univ., West Lafayette, IN ↗
Additively Manufactured Carbon Fiber-Reinforced Siliconized Silicon Carbide Composites Using Carbon Fiber-Reinforced Poly-Ether-Ether-Ketone (PEEK) as a Precursor
Herein, we report a method to additively manufacture carbon fiber-reinforced siliconized silicon carbide composites. The process involves the pyrolysis of a 3D-printed carbon fiber-reinforced poly-ether-ether-ketone (PEEK) composite to produce a porous carbon fiber-reinforced carbon matrix composite preform, which is subsequently infiltrated with molten silicon to obtain a carbon fiber-reinforced siliconized silicon carbide composite. A key aspect of the method is limiting polymer melt flow during pyrolysis of PEEK, which is achieved by thermally annealing the 3D-printed carbon fiber-reinforced PEEK preform in air at a temperature below PEEK’s melting temperature. Rheological and differential scanning calorimetry (DSC) measurements demonstrate that the thermal annealing treatment altered the melting behavior of PEEK, while NMR and FTIR measurements provided a mechanistic explanation for the structural changes responsible for the behavior. It was also found that dimensional changes during pyrolysis were anisotropic with greater shrinkage in the stacking direction of the material.
Yoon, Bola [ORNL] (ORCID:0000000260875373)↗
ATOMIC AND MICROSTRUCTURAL ORIGINS OF STORED ENERGY RELEASE IN NEUTRON-IRRADIATED SILICON CARBIDE
Here, we employ a combination of advanced synchrotron-based scattering characterization techniques to understand and unravel the atomic origins of the colossal stored energy release in neutron irradiated silicon carbide. The quantification of the neutron irradiation-induced defects, and their impact on the structureproperty relationship is important for the design and safe operation of advanced fission and fusion reactors. Our experimental results show that the atomic structure in the as irradiated samples is significantly perturbed due to a large fraction of vacancy and interstitial type defects that lead to complex microstructures and additional components in the x-ray diffraction and pair distribution function results. We directly correlate the stored energy release to the recovery of the sub-lattices, with pair distribution function analysis highlighting that the carbon interstitial and vacancy-type defects contribute to stored energy more than those of silicon. We find these results to be striking and believe our discoveries to be timely and noteworthy given the technological importance of silicon carbide to the nuclear fission and fusion communities.
Sprouster, D.J.↗
Boron carbide whiskers produced by vapor deposition
Boron carbide whiskers have an excellent combination of properties for use as a reinforcement material. They are produced by vaporizing boron carbide powder and condensing the vapors on a substrate. Certain catalysts promote the growth rate and size of the whiskers.
Source record↗
Metal carbide-graphite composites
High temperature creep tests of niobium carbide- carbon composites, and evaluation of additives for tantalum carbide-carbon composites
Harada, Y.↗
Aluminum-silicon eutectic alloy improves electrical and mechanical contact to silicon carbide
Alloy contact layer is made at relatively low temperature and has good wetting characteristics. Contacts adhere well to silicon carbide surface, penetrating about 300 to 500 angstroms into it. Contacts are ohmic on p-type silicon carbide and blocking on n-type.
Shier, J. S.↗
Carbides as high-temperature structural materials
Single crystal carbides as high temperature structural materials, noting titanium carbide properties and strength-to-density ratio of B-doped crystals
Hollox, G. E.↗
Carbide factor predicts rolling-element bearing fatigue life
Analysis was made to determine correlation between number and size of carbide particles and rolling-element fatigue. Correlation was established, and carbide factor was derived that can be used to predict fatigue life more effectively than such variables as heat treatment, chemical composition, and hardening mechanism.
Chevalier, J. L.↗
Carbide fuel pin and capsule design for irradiations at thermionic temperatures
The design of a capsule assembly to evaluate tungsten-emitter - carbide-fuel combinations for thermionic fuel elements is presented. An inpile fuel pin evaluation program concerned with clad temperture, neutron spectrum, carbide fuel composition, fuel geometry,fuel density, and clad thickness is discussed. The capsule design was a compromise involving considerations between heat transfer, instrumentation, materials compatibility, and test location. Heat-transfer calculations were instrumental in determining the method of support of the fuel pin to minimize axial temperature variations. The capsule design was easily fabricable and utilized existing state-of-the-art experience from previous programs.
Siegel, B. L.↗
High-temperature mass spectrometry - Vaporization of group 4-B metal carbides
The high temperature vaporization of the metal-carbon systems TiC, ZrC, HfC, and ThC was studied by the Knudsen effusion - mass spectrometric method. For each system the metal dicarbide and tetracarbide molecular species were identified in the gas phase. Relative ion currents of the carbides and metals were measured as a function of temperature. Second- and third-law methods were used to determine enthalpies. Maximum values were established for the dissociation energies of the metal monocarbide molecules TiC, ZrC, HfC, and ThC. Thermodynamic functions used in the calculations are discussed in terms of assumed molecular structures and electronic contributions to the partition functions. The trends shown by the dissociation energies of the carbides of Group 4B are compared with those of neighboring groups and discussed in relation to the corresponding oxides and chemical bonding. The high temperature molecular beam inlet system and double focusing mass spectrometer are described.
Stearns, C. A.↗