Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Calvin cycle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Achieving Stable Molybdenum Oxide Cathodes for Aqueous Zinc-Ion Batteries in Water-in-Salt Electrolyte

A layered MoO 3 material with large interlayer spacing represents a promising cathode for aqueous rechargeable Zn-ion batteries (ARZIBs), but the implementation of this material is limited due to the intrinsically low conductivity and poor structural stability. A 30 m ZnCl 2 water-in-salt electrolyte (WISE) was introduced to a MoO 3 nanobelt cathode for the first time, significantly increasing the stability of MoO 3 cathodes compared to those in 3 M ZnSO 4 and 3 M ZnCl2 electrolyte. The Zn/MoO 3 cell in WISE unambiguously demonstrated significantly improved rate performance delivering 349, 253, and 222 mAh/g at 100, 500, and 1000 mA/g, denoting a 2×, and 12× capacity increase of those achieved in 3 M electrolytes at 500 and 1000 mA/g, respectively. A capacity retention rate of 73% was achieved after (dis)charging at 100 mA/g for 100 cycles, and no obvious capacity fading was observed at higher current densities of 500 mA/g and 2A/g. A compilation of structural and morphological characterization was systematically performed to provide insight into the mechanisms of the improved performance in ZnCl 2 WISE for the MoO3 cathode materials. Specifically, our data collectively suggested that the drastic fading in 3M electrolytes can be attributed to the parasitic surface deposits on Zn originated from Mo dissolution and H 2 formation due to Zn corrosion and hydrogen evolution reaction (HER), which were significantly suppressed in the ZnCl 2 WISE. The direct visualization of these side reactions was achieved for the first time in the Zn-MoO 3 system, using an in situ optoelectrochemical measurement.

25 ENERGY STORAGE↗

First-of-a-Kind Fuel-bearing Molten Chloride Irradiation Experiment

Molten salt reactors (MSRs) have garnered increasing attention recently with several demonstration efforts on the way. A key challenge to the licensing basis for these reactors is the lack of experimental data on fueled salts. This is expected to be crucial to the safety evaluation and licensing basis of reactors of this type deployed in the future. While capability for irradiating molten salts has been reestablished in the recent decade, no enriched fuel irradiation capability has been developed and tested as of yet. A new experiment vehicle under development at Idaho National Laboratory (INL) is presented here. The Molten-salt Research Temperature-controlled Irradiation (MRTI) experiment was developed to host enriched uranium bearing salt samples to be irradiated at a test reactor within the lab complex. One of the key scientific objectives is to provide irradiated salt samples for post-irradiation examination (PIE) to study the impact of fission product generation and neutron/gamma radioactivity on the salt solution and salt-facing wall material. This paper provides a detailed overview of the mechanical design of the experiment, followed by an overview of the fabrication and assembly of an initial prototype vehicle (with non-fuel-bearing salt). A summary of the key analyses conducted as a part of the performance and safety evaluation is then provided. Lastly, an overview of the test conducted in prototypic out-of-pile (non-neutron) environment are shown. These evaluations provide the foundation for a planned irradiation of an enriched uranium-bearing chloride salt sample in the near term. The upcoming irradiation will contain 13 cm3 of UCl3-NaCl salt (93% enrichment) generating around 20 W/cm3 of fission energy during irradiation and a temperature range that can be contained between bounds of 525-900°C.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Interdisciplinary Workshop on the Impacts of Land Use and Land Management on Earth System Evolution, Biogeochemical Cycles, Extremes, and Inter-Sectoral Dynamics (Final Report)

The Aspen Global Change Institute (AGCI) convened a week-long interdisciplinary science workshop from September 15-20, 2019 entitled, “Impacts of Land Use and Land Management on Earth System Evolution, Biogeochemical Cycles, Extremes, and Inter-Sectoral Dynamics.” The purpose of the workshop was to advance research on the impacts of land use and land management on climate, carbon emissions, and extremes, as well as the impact of land-use change on important societal issues such as food, water, and energy security. The workshop was co-chaired by Kate Calvin (PNNL), George Hurtt (University of Maryland), and Dave Lawrence (National Center for Atmospheric Research). Co-funders of the workshop included NASA, NOAA, and travel support for European colleagues through CRESCENDO. This workshop brought together 31 professionals with expertise across biogeochemistry, climate impacts, mitigation, land use datasets, and societal impacts to coordinate on upcoming research and publications on the role of biogeochemical and biophysical properties of the Earth surface and their implications for climate, as conducted through the Land Use model Intercomparison Project (LUMIP), which is part of Phase 6 of the Coupled Model Intercomparison Project (CMIP6). A primary outcome of the meeting was the definition and planning of a series of LUMIP papers that will rely on the LUMIP and CMIP6 simulations. By the end of the meeting more than twenty papers and paper lead authors had been identified and scoped out. Around ten of these papers were submitted by the December 31, 2019 IPCC deadline.

54 ENVIRONMENTAL SCIENCES↗

Burning Embers: Towards More Transparent and Robust Climate-change Risk Assessments

The Intergovernmental Panel on Climate Change (IPCC) reports provide policy-relevant insights about climate impacts, vulnerabilities and adaptation through a process of peer-reviewed literature assessments underpinned by expert judgement. An iconic output from these assessments is the burning embers diagram, first used in the Third Assessment Report to visualize reasons for concern, which aggregate climate-change-related impacts and risks to various systems and sectors. These burning embers use colour transitions to show changes in the assessed level of risk to humans and ecosystems as a function of global mean temperature. In this Review, we outline the history and evolution of the burning embers and associated reasons for concern framework, focusing on the methodological approaches and advances. While the assessment framework and figure design have been broadly retained over time, refinements in methodology have occurred, including the consideration of different risks, use of confidence statements, more formalized protocols and standardized metrics. Comparison across reports reveals that the risk level at a given temperature has generally increased with each assessment cycle, reflecting accumulating scientific evidence. For future assessments, an explicit, transparent and systematic process of expert elicitation is needed to enhance comparability, quality and credibility of burning embers.

burning embers diagram↗

Methane utilization in Methylomicrobium alcaliphilum 20Z R : a systems approach

Biological methane utilization, one of the main sinks of the greenhouse gas in nature, represents an attractive platform for production of fuels and value-added chemicals. Despite the progress made in our understanding of the individual parts of methane utilization, our knowledge of how the whole-cell metabolic network is organized and coordinated is limited. Attractive growth and methane-conversion rates, a complete and expert-annotated genome sequence, as well as large enzymatic, 13 C-labeling, and transcriptomic datasets make Methylomicrobium alcaliphilum 20Z R an exceptional model system for investigating methane utilization networks. Here we present a comprehensive metabolic framework of methane and methanol utilization in M. alcaliphilum 20Z R . A set of novel metabolic reactions governing carbon distribution across central pathways in methanotrophic bacteria was predicted by in-silico simulations and confirmed by global non-targeted metabolomics and enzymatic evidences. Our data highlight the importance of substitution of ATP-linked steps with PPi-dependent reactions and support the presence of a carbon shunt from acetyl-CoA to the pentose-phosphate pathway and highly branched TCA cycle. The diverged TCA reactions promote balance between anabolic reactions and redox demands. As a result, the computational framework of C 1 -metabolism in methanotrophic bacteria can represent an efficient tool for metabolic engineering or ecosystem modeling.

09 BIOMASS FUELS↗

Improved Capacity Retention of Lithium Ion Batteries under Fast Charge via Metal-Coated Graphite Electrodes

A primary barrier preventing repetitive fast charging of Li-ion batteries is lithium metal plating at the graphite anode. One approach toward mitigating Li metal deposition is the deliberate modification of the graphite anode surface with materials demonstrating high overpotentials unfavorable for Li metal nucleation, such as Ni or Cu nanoscale films. This research explores Ni and Cu surface coatings at different areal loadings (3 or 11 μg cm -2 ) on the electrochemistry of graphite/LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) type Li-ion batteries. Extended galvanostatic cycling of control and metal-coated electrodes in graphite/NMC622 pouch cells are conducted under high rate conditions. Based on the overpotential of Li deposition on metal foil, both Ni and Cu treatments were anticipated to result in reduced lithium deposition. The higher metal film loadings of 11 μg cm -2 Ni- or Cu-coated electrodes exhibit the highest capacity retention after 500 cycles, with mean improvements of 8% and 9%, respectively, over uncoated graphite electrodes. Li plating quantified by X-ray diffraction indicates that the metal films effectively reduce the quantity of plated Li compared to untreated electrodes, with 11 μg cm -2 Cu providing the greatest benefit.

25 ENERGY STORAGE↗

Biofuel Viability for the Ocean-Going Marine Sector

Marine transport contributes significantly to global carbon dioxide emissions but is one of the most difficult sectors to decarbonize because full electrification is infeasible. Renewable, low–carbon biofuels offer a potential path to decarbonization of the marine sectors but the understanding of the effects of new biofuels on engine performance and emissions is limited. In this document we report on the results of a series of studies on the techno-economic, life cycle and technical feasibility of biofuels as replacements for heavy fuel oils currently used to fuel large ocean-going vessels.

09 BIOMASS FUELS↗

Unraveling the Dissolution-Mediated Reaction Mechanism of α-MnO 2 Cathodes for Aqueous Zn-Ion Batteries

Aqueous Zn/α-MnO 2 batteries have attracted immense interest owing to their high energy density, low cost, and safety, making them desirable for future large-scale energy application. Despite these merits, the comprehensive understanding of their reaction mechanism has been elusive due to the limitations of standard bulk characterization. Here, via transmission electron microscopy, the dissolution-mediated reaction mechanism of a Zn/α-MnO 2 system is discovered and explored in full scope to involve reversible formation of Zn 4 SO 4 (OH) 6 · x H 2 O and “birnessite-like” Zn-MnO x phase upon cycling. Overall, α-MnO 2 acts primarily as a source for cell activation through dissolution and thus is not directly involved in the Zn redox chemistry. Overall, this microscopic study offers a unique knowledge on the unconventional reaction chemistry of Zn/α-MnO 2 batteries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrode Separation and Froth Flotation for the Recovery of Li-ion Battery Cathode Materials

Increasing use of Li-ion batteries (LIBs) will significantly increase the quantity of LIB waste generated from end-of-life batteries. Spent LiCoO 2 (LCO) battery cathodes contain significant quantities of valuable metals, making them good candidates for recycling. Typical recycling processes rely on high temperatures (pyrometallurgy) and chemical leachants (hydrometallurgy) to completely decompose the cathode and enable material recovery. Direct recycling processes and recovery of active material from electrode scrap do not benefit from such destructive recycling, and an efficient means of separating the cathode active material from the inactive components (e.g., polyvinylidene fluoride (PVDF) binder, conductive carbon) is needed. Here, we explore PVDF removal from LCO cathodes by two separate methods, evaluating their suitability for coupling to subsequent separation by froth flotation (FF). We show that washing electrodes in the solvent PolarClean (PC) dissolves PVDF away from LCO cathodes, enabling separation of the remaining LCO and conductive carbon by FF. The process is suitable for use with both pristine and cycled LCO electrodes, and the pristine recovered material can be used to prepare electrodes capable of cycling at 140 mAh/g. In conclusion, this demonstrates the suitability of coupled PC washing and FF separation for recycling both end-of-life batteries and scrap electrode material.

Batteries↗

Annual Report for the QCL Calibration Project

Under the Quantum Cascade Laser (QCL) Calibrations project, Pacific Northwest National Laboratory (PNNL) is collaborating with Utah State University and Space Dynamics Laboratory to design, build, and test a QCL calibration source system suitable for insertion into remote sensing platforms. In FY14, the second year of this project, PNNL completed the radiation testing of QCLs using radiation levels that are typical for a space environment. These tests involved both 64-MeV protons, and 1.17-MeV and 1.33-MeV gamma rays. No changes were observed above the measurement uncertainty indicating that QCLs are viable sources for space-based missions. High-level testing was also carried out with gamma rays to determine if QCLs are sensitive to high doses of gamma radiation. After an accumulated dose of 1.5 Mrad(Si), the QCLs continue to demonstrate high performance although a small increase in threshold current, 0.11 ± 0.14% and 0.51 ± 0.15% for M1244D and M664M, respectively, was observed. At this stage, it is unclear if this small increase is from the radiation exposure, because generally it is within the observed experimental uncertainty, which is most likely because of mechanical changes through repeated mounting cycles. There was also some accidental damage to the laser chips and their front facets from the extensive but necessary handling of the devices during these tests. Regardless, the QCLs are robust and should not be susceptible to degradation for most missions.

36 MATERIALS SCIENCE↗

Effect of externally applied pressure on rechargeable alkaline zinc batteries at limited depth of discharge

Rechargeable alkaline zinc batteries (AZBs) are being actively researched for grid-scale energy storage due to their safety, low toxicity, abundance, low cost, and ease-of-production. However, numerous studies on alkaline Zn–MnO 2 batteries have shown that issues such as heterogeneous Zn deposition, passivation, dendrite formation, hydrogen evolution, and formation of chemically irreversible byproducts on the electrode surfaces still limit their rechargeability. Several mitigating strategies have been proposed to improve the rechargeability of alkaline Zn–MnO 2 batteries, but the effect of pressure on electrochemical behavior has not been systematically investigated. In this paper, we demonstrate that an externally applied pressure at 20% MnO 2 depth-of-discharge (DOD MnO 2 ) has a profound effect on impedance, electrochemical cycling behavior, and materials morphology of alkaline Zn–MnO 2 batteries. Better electrochemical performance and improved morphology were achieved at 2.12 MPa pressure compared to 0.05 MPa pressure. Moreover, we examined the effect of externally applied pressure from 0 to 5.05 MPa before cycling and found that charge transfer resistance decreases significantly with pressure. Furthermore, we reported stable electrochemical cycling of MnO 2 ‖MnO 2 symmetric cells for 500 hours at 20% DOD under 2.12 MPa pressure. In conclusion, our efforts in understanding the effect of pressure could help design high performance and durable rechargeable alkaline Zn–MnO 2 batteries for grid-scale energy storage.

Rechargeable alkaline batteries↗

Model quantification of the effect of coproducts and refinery co-hydrotreating on the economics and greenhouse gas emissions of a conceptual biomass catalytic fast pyrolysis process

Here we present model results for a scaled-up conceptual process informed by bench scale biomass catalytic fast pyrolysis (CFP) and hydrotreating experimental data. This process uses a Pt/TiO 2 catalyst during CFP, which produces a partially deoxygenated organic biocrude intermediate that is then hydroprocessed to a hydrocarbon fuel blendstock; the catalyst also enables high yields of acetone and methyl-ethyl-ketone (MEK) coproducts. Two options for hydroprocessing were modeled: (A) co-hydrotreating at a petroleum refinery using hydrogen sourced from steam reforming of natural gas and (B) standalone hydrotreating at a biorefinery using hydrogen sourced from CFP off gases. The results revealed that Case A was economically advantageous with a modeled minimum fuel selling price (MFSP) of $\$$2.83/GGE or gallon gasoline equivalent (in 2016 US dollars), while the additional cost of standalone hydrotreating facilities in Case B increased the MFSP to $3.13/GGE. Conversely, greenhouse gas (GHG) emissions were lower for Case B (3.9 g CO 2 e/MJ) compared to Case A (21.5 g CO 2 e/MJ) due to the use of biogenic (Case B) and fossil-derived (Case A) hydrogen. In a third option (Case C), the requirements for separation and purification of acetone and MEK were removed from the refinery co-processing scenario (Case A) to evaluate the impacts of this process simplification. Elimination of these coproducts increased the MFSP to $3.21/GGE and GHG emissions to 35 g CO 2 e/MJ. These comparisons based on our detailed conceptual models provide economic and sustainability guidance regarding processing choices for future biorefineries. While refinery coprocessing using existing equipment and the production of relatively valuable coproducts can benefit the economics, the hydrogen-source and biogenic coproducts can have significant impacts on the sustainability of the process, and feasibility to use CFP off-gases or other renewable sources for hydrogen production can help lower GHG emissions.

09 BIOMASS FUELS↗

Genome sequence, phylogenetic analysis, and structure-based annotation reveal metabolic potential of Chlorella sp. SLA-04

Algae are a broad class of photosynthetic eukaryotes that are phylogenetically and physiologically diverse. Most of the phylogenetic diversity has been inferred from 18S rDNA sequencing since there are only a few complete genomes available in public databases. Here we use ultra-long-read Nanopore sequencing to determine a gapless, telomere-to-telomere complete genome sequence of Chlorella sp. SLA-04, previously described as Chlorella sorokiniana SLA-04. Chlorella sp. SLA-04 is a green alga that grows to high cell density in a wide variety of environments - high and neutral pH, high and low alkalinity, and high and low salinity. SLA-04's ability to grow in high pH and high alkalinity media without external CO 2 supply is favorable for large-scale algal biomass production. Phylogenetic analysis performed using ribosomal DNA and conserved protein sequences consistently reveal that Chlorella sp. SLA-04 forms a distinct lineage from other strains of Chlorella sorokiniana. We complement traditional genome annotation methods with high throughput structural predictions and demonstrate that this approach expands functional prediction of the SLA-04 proteome. Genomic analysis of the SLA-04 genome identifies the genes capable of utilizing TCA cycle intermediates to replenish cytosolic acetyl-CoA pools for lipid production. We also identify a complete metabolic pathway for sphingolipid anabolism that may allow SLA-04 to readily adapt to changing environmental conditions and facilitate robust cultivation in mass production systems. Altogether, this work clarifies the phylogeny of Chlorella sp. SLA-04 within Trebouxiophyceae and demonstrates how structural predictions can be used to improve annotation beyond sequencebased methods.

59 BASIC BIOLOGICAL SCIENCES↗

Toward Environmentally Friendly Lithium Sulfur Batteries: Probing the Role of Electrode Design in MoS 2 -Containing Li–S Batteries with a Green Electrolyte

While lithium sulfur batteries (Li–S) hold promise as future high energy density low cost energy storage systems, barriers to implementation include low sulfur loading, limited cycle life, and the use of toxic electrolyte solvents. A comprehensive study of Li–S cells in the environmentally benign di(propylene glycol) dimethyl ether (DPGDME)-based electrolyte, using as-prepared MoS 2 nanosheets derived from a facile aqueous microwave synthesis as polysulfide trapping agents, is reported herein for the first time. Conventional coated foil electrodes and binder-free electrodes (BFEs) with various structures are systematically generated and tested to correlate electrode design with the resulting electrochemical behavior. Significantly improved Li–S electrochemistry is demonstrated through the synergy of MoS 2 chemistry and binder-free electrode engineering. In the coating configuration, the MoS 2 -containing cell evinced better rate performance and more stable cyclability than the cell without MoS 2 . In comparison with the coating counterparts, the BFE cells exhibited excellent cycle stability and superior rate capability (10-fold capacities and energy density per electrode weight with 20% higher retention rate) despite 2X higher areal sulfur loading. As a result, the BFE cell improvement can be attributed to the synergistic effect of the i) interconnected macroporous structure of CNT interlayers, providing a conductive framework, and ii) the efficient polysulfide trapping by the MoS 2 nanosheets.

25 ENERGY STORAGE↗