Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CaI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Optimizing Landsat Next Shortwave Infrared Bands for Crop Residue Characterization

This study focused on optimizing the placement of shortwave infrared (SWIR) bands for pixel-level estimation of fractional crop residue cover (f R ) for the upcoming Landsat Next mission. We applied an iterative wavelength shift approach to a database of crop residue field spectra collected in Beltsville, Maryland, USA (n = 916) and computed generalized two- and three-band spectral indices for all wavelength combinations between 2000 and 2350 nm, then used these indices to model field-measured f R . A subset of the full dataset with a Normalized Difference Vegetation Index (NDVI) < 0.3 threshold (n = 643) was generated to evaluate green vegetation impacts on f R estimation. For the two-band wavelength shift analyses applied to the NDVI < 0.3 dataset, a generalized normalized difference using 2226 nm and 2263 nm bands produced the top f R estimation performance (R 2 = 0.8222; RMSE = 0.1296). These findings were similar to the established two-band Shortwave Infrared Normalized Difference Residue Index (SINDRI) (R 2 = 0.8145; RMSE = 0.1324). Performance of the two-band generalized normalized difference and SINDRI decreased for the full-NDVI dataset (R 2 = 0.5865 and 0.4144, respectively). For the three-band wavelength shift analyses applied to the NDVI < 0.3 dataset, a generalized ratio-based index with a 2031–2085–2216 nm band combination, closely matching established Cellulose Absorption Index (CAI) bands, was top performing (R 2 = 0.8397; RMSE = 0.1231). Three-band indices with CAI-type wavelengths maintained top f R estimation performance for the full-NDVI dataset with a 2036–2111–2217 nm band combination (R 2 = 0.7581; RMSE = 0.1548). The 2036–2111–2217 nm band combination was also top performing in f R estimation (R 2 = 0.8690; RMSE = 0.0970) for an additional analysis assessing combined green vegetation cover and surface moisture effects. Our results indicate that a three-band configuration with band centers and wavelength tolerances of 2036 nm (±5 nm), 2097 nm (±14 nm), and 2214 (±11 nm) would optimize Landsat Next SWIR bands for f R estimation.

Landsat Next↗

Multiresource analysis and information system concepts for incorporating LANDSAT and GIS technology into large area forest surveys

A method of relating different classifications at each stage of a multistage, multiresource inventory using remotely sensed imagery is discussed. A class transformation matrix allowing the conversion of a set of proportions at one stage, to a set of proportions at the subsequent stage through use of a linear model, is described. The technique was tested by applying it to Kershaw County, South Carolina. Unsupervised LANDSAT spectral classifications were correlated with interpretations of land use aerial photography, the correlations employed to estimate land use classifications using the linear model, and the land use proportions used to stratify current annual increment (CAI) field plot data to obtain a total CAI for the county. The estimate differed by 1% from the published figure for land use. Potential sediment loss and a variety of land use classifications were also obtained.

Langley, P. G.↗

Mineralogic and petrologic studies of meteorites and lunar samples

During a 13 year period beginning in 1971, the Extraterrestrial Petrology Group examined lunar soils from all 6 Apollo missions and those returned by the Soviet Luna 16, Luna 20, and Luna 24 missions. In addition, the properties and apparent origin of the carbonaceous chondrites were examined. Chondrules, calcium-aluminum-rich inclusions (CAI) and the fine grained matrix materials that accompany chondrules and CAI's in primitive meteorites were investigated. The effects of planetary hydrothermal alteration of matrix materials in the C1 chondrite was also investigated. Full length papers and extended abstracts published during the grant are listed chronologically.

Wood, J. A.↗

The microstructure of minerals in coarse-grained Ca-Al-rich inclusions from the Allende meteorite

Transmission electron microscopy (TEM) is used to investigate the microstructure and microchemistry of minerals in Ca-Al-rich, coarse-grained inclusions (CAI) from the meteorite. The spinels contain only low to moderate dislocation densities and are characterized by a ubiquitous, fine black spotty texture that is thought to originate from a slightly nonstoichiometric composition. Whereas the Ti-Al-pyroxenes are relatively devoid of features, they contain veins of secondary phases apparently deposited in unhealed cracks. Chromite is identified in the veins, indicating transport of oxidized iron during alteration. The melilites show the greatest variety of microstructures and are the most heavily altered phase in CAI. High dislocation densities are common and the crystals exhibit considerable internal strain, suggesting that they have not been annealed.

Barber, D. J.↗

The geochemical behavior of refractory noble metals and lithophile trace elements in refractory inclusions in carbonaceous chondrites

Recent models of Ca, Al-rich (CAI) inclusion petrogenesis, and the recent availability of thermodynamic data have led to the reexamination of the geochemical behavior of the refractory noble metals (RNM) and several lithophile refractory trace elements in CAI's in the context of distillation models. Here, pertinent chemical and mineralogical properties of the various classes of refractory inclusions are reviewed, and calculations of the stability of LRTE-RNM alloys and several LRTE oxides under nebular conditions are presented. The calculations, observations and experimental results are applied to a new model of the origin of refractory metal nuggets, and a specific mechanism is identified for producing Group II chemical patterns in a cold star nebula by fractionating interstellar dust at low temperature on the basis of physical differences between different populations of pre-solar grains.

Fegley, B., Jr.↗

Ca isotope variations in Allende

Ca-isotope measurements of Allende Ca-Al-rich inclusions (CAIs), together with those on an apatite-enriched fraction from Orgueil, indicate the existence of widespread excesses on the neutron-rich isotope Ca-48. Isotopic anomalies are noted in 7 out of 11 CAIs analyzed. This abundance of isotopic excesses places Ca alongside Ti and O, although no clear correlation has yet been found between Ca-48 and Ti-50, which are thought to be coproduced by neutron-rich nucleosynthetic processes within stars. It is suggested that the higher volatility of Ca, by comparison with Ti compounds, led to a variable dilution with isotopically normal Ca in vaporization and recondensation processes in stellar envelopes, the interstellar medium, and/or the solar nebula.

Jungck, M. H. A.↗

Beyond the sterile cockpit

Consideration is given to some of the negative aspects of the trend toward increased automation of aircraft flight decks. The history of automated devices for navigation, communications and detection on board aircraft is reviewed. Instances of automatic system failure are identified which have led to accidents, and the events surrounding the downing of Korean Airlines Flight 747 are reexamined within the context of a computer-based system failure. Finally, new software and interactive systems to reduce navigational error due to inadequate computer-assisted flight instruction (CAI) are described, with emphasis given to speech processing and intelligent CAI systems.

Wiener, E. L.↗

Mineral chemistry and origin of spinel-rich inclusions in the Allende CV3 chondrite

The present electron probe microanalysis of 20 spinel-rich inclusions in Allende indicates that the mineralogy of spinel-rich Allende inclusions is similar to that of fine grained Ca, Al-rich inclusions (CAIs) in ALH-77003 and rims on coarse grained CAIs in Allende. The mineralogy, mineral chemistry, and bulk chemistry of the inclusions indicate that they are not primitive aggregates of crystalline nebular condensates, but rather aggregates of minute concentric objects that are presently interpreted to be a fractionated distillation residue that lost Ca, Si-rich partial melt. It is suggested that interstellar dust aggregates were melted or distilled into Allende inclusions by aerodynamic drag heating, in regions of the nebula where the dust/gas ratio was so enhanced that the local oxygen fugacity was raised by several order of magnitude and liquids became thermodynamically stable.

Kornacki, A. S.↗

A regional 17-18 MA thermal event in Southwestern Arizona

A regional thermal event in southwestern Arizona 17 to 18 Ma ago is suggested by discordances between fission track (FT) and K-Ar dates in Tertiary volcanic and sedimentary rocks, by the abundance of primary hydrothermal orthoclase in quenched volcanic rocks, and by the concentration of Mn, Ba, Cu, Ag, and Au deposits near detachment faults. A high condont alteration index (CAI) of 3 to 7 is found in Paleozoic rocks of southwestern Arizona. The high CAI may have been caused by this mid-Tertiary thermal event. Resetting of temperature-sensitive TF dates (2) 17 to 18 Ma with respect to K-Ar dates of 24 and 20 Ma has occurred in upper plate volcanic rocks at the Harcuvar and Picacho Peak detachments. Discordances between FT and K-Ar dates are most pronounced at detachment faults. However, on a regional scale Ft dates from volcanic and sedimentary rocks approach 17 to 18 Ma event in areas away from known detachment faults. Effects of detachment faulting on the K-Ar system suggest that dates of correlative rocks will be younger as the detachment fault is approached.

Brooks, W. E.↗

Crystallization sequences of Ca-Al-rich inclusions from Allende - The effects of cooling rate and maximum temperature

The crystallization sequences, mineral chemistries, and textures resulting from the cooling in air from 1275-1580 C to below 100 C at rates between 0.5 and 100 c/hr of an average Type B Ca-Al-rich inclusion composition are investigated. Comparison of experimental results with petrographic observations of Type B CaIs indicates that most inclusions were partially melted and then cooled at rates of the order of a few tenths to tens of degrees per hour, with maximum temperatures of about 1400 C suggested for intermediate Type B Allende inclusions. Data are consistent with the drag heating of particles falling though nebular gas, heating in nebular shock fronts, or other thermal heterogeneities in the early nebula allowing time scales for heating of CAIs much shorter than those for the nebular cloud as a whole.

Stolper, E.↗

The abundance and relative volatility of refractory trace elements in Allende Ca,Al-rich inclusions - Implications for chemical and physical processes in the solar nebula

The relative volatilities of lithophile refractory trace elements (LRTE) were determined using calculated 50-percent condensation temperatures. Then, the refractory trace-element abundances were measured in about 100 Allende inclusions. The abundance patterns found in Allende Ca,Al-rich inclusions (CAIs) and ultrarefractory inclusions were used to empirically modify the calculated LRTE volatility sequence. In addition, the importance of crystal-chemical effects, diffusion constraints, and grain transport for the origin of the trace-element chemistry of Allende CAIs (which have important implications for chemical and physical processes in the solar nebula) is discussed.

Kornacki, Alan S.↗

Plagioclase-rich inclusions in carbonaceous chondrite meteorites - Liquid condensates?

The characteristics and formation of coarse-grained, plagioclase-rich inclusions are investigated. The textures, mineralogical compositions, and initial Al-26/Al-27 ratios for the plagioclase-rich inclusions are described. It is observed that plagioclase-rich inclusions in carbonaceous chondrites are either Ca-Al-rich inclusions (CAIs) composed of 30-60 vol pct anorthite, and less than 35 vol pct Ti-Al-pyroxene and melilite, or CA chondrites composed of plagioclase, pyroxene, olivine, spinel, and melilite. It is observed that CA chondrules are chemically and mineralogically the most similar components shared by carbonaceous and ordinary chondrites. The textural changes observed in the inclusions are examined. The data reveal that the CAIs have three textural groups: coarse anorthite laths, equigranular anorthite and Ti-Al-pyroxene, and lacy Ti-Al-pyroxene and fine-grained anorthite.

Wark, D. A.↗

Intrinsic oxygen fugacity measurements of some Allende Type B inclusions

The intrinsic oxygen fugacities (IOFs) of two type B Ca-rich and Al-rich inclusions (CAI) from the Allende meteorite were measured using the solid-electrolyte double-cell IOF technique of Ulmer et al. (1976). The measurements were compared to calculated and experimentally extrapolated fO2 of type B phases. It was found that the IOFs of the type B are 6-8 orders of magnitude more oxidized (H2/H2O = 1-10) than the canonical solar nebular gas (H2/H2O = 100-2000). It is suggested that some local fO2 enhancing mechanism, such as dust or gas concentrations, or the release of oxygen-rich vapors during CAI volatilization in the type B inclusions was in operation at temperatures higher than 700 C.

Kozul, Jean M.↗

Refractory lithophile elements

The abundance and distributions of refractory lithophile elements in chondritic meteorites and calcium-aluminum inclusions (CAIs) are presently noted to indicate that protoplanetary material was heated to very high temperatures. Three subsequent elemental fractionations have since been resolved: (1) that within the CAIs, indicating temperatures high enough to evaporate much of the refractory element content; (2) that of the refractory lithophile elements; and (3) that of Mg and Si, which indicates that the high temperatures were prevalent throughout the chondrite-formation region. Attention is given to models that have been proposed to explain elemental and isotopic abundances of refractory lithophile elements in chondritic material.

Larimer, John W.↗

Zinc isotope anomalies in Allende meteorite inclusions

The isotopic compositions of Zn, Cr, Ti, and Ca have been measured in a number of CAIs from the Allende meteorite. The aim was to test astrophysical models which predict large excesses of Zn-66 to accompany excesses in the neutron-rich isotopes of Ca, Ti, Cr, and Ni. Some of the CAIs show clearly resolved but small excesses for Zn-66 which are at least an order of magnitude smaller than predicted. This result may simply reflect the volatility and chemical behavior of Zn as compared to the other (more refractory) anomalous elements found in these samples. Alternatively, revision of parameters and assumptions used for the model calculations may be required.

Loss, R. D.↗

Retrospective indexing (RI) - A computer-aided indexing technique

An account is given of a method for data base-updating designated 'computer-aided indexing' (CAI) which has been very efficiently implemented at NASA's Scientific and Technical Information Facility by means of retrospective indexing. Novel terms added to the NASA Thesaurus will therefore proceed directly into both the NASA-RECON aerospace information system and its portion of the ESA-Information Retrieval Service, giving users full access to material thus indexed. If a given term appears in the title of a record, it is given special weight. An illustrative graphic representation of the CAI search strategy is presented.

Buchan, Ronald L.↗

Removal of surface loop from stitched composites can improve compression and compression-after-impact strengths

Stitching through-the-thickness (TTT) of composite materials produces a surface loop of yarn between successive penetrations. The surface loop is pressed into the surface layers of the composite material during the curing of the laminate, kinking the in-plane fibers near the surface of the material. The compression strength and compression-after-impact (CAI) strengths of carbon-epoxy specimens were measured with and without the surface loop. Removal of the surface loop had no influence on failure mode or failure mechanism, but did significantly increase the compression and CAI strengths.

Farley, Gary L.↗

Properties of five toughened matrix composite materials

The use of toughened matrix composite materials offers an attractive solution to the problem of poor damage tolerance associated with advanced composite materials. In this study, the unidirectional laminate strengths and moduli, notched (open-hole) and unnotched tension and compression properties of quasi-isotropic laminates, and compression-after-impact strengths of five carbon fiber/toughened matrix composites, IM7/E7T1-2, IM7/X1845, G40-800X/5255-3, IM7/5255-3, and IM7/5260 have been evaluated. The compression-after-impact (CAI) strengths were determined primarily by impacting quasi-isotropic laminates with the NASA Langley air gun. A few CAI tests were also made with a drop-weight impactor. For a given impact energy, compression after impact strengths were determined to be dependent on impactor velocity. Properties and strengths for the five materials tested are compared with NASA data on other toughened matrix materials (IM7/8551-7, IM6/1808I, IM7/F655, and T800/F3900). This investigation found that all five materials were stronger and more impact damage tolerant than more brittle carbon/epoxy composite materials currently used in aircraft structures.

Cano, Roberto J.↗