Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPRECIPITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Study of de-watering from the gelatinous precipitate formed during co-precipitation of Nd-YAG powder

Neodymium doped Yttrium Aluminium Garnet (Nd:YAG) ceramics have been synthesised using coprecipitation technique and high temperature vacuum sintering. Gelatinous like precipitates were obtained when precursors of Nd, Al and Yb-nitrate solutions are co-precipitated using ammonia co-precipitant. De-watering from the gelatinous like precipitates is a big challenge and it possesses difficulty in filtration. Evaporation of water by heating resulted in strong agglomerated powder. Different agents were used to ease the filtration process, which is correlated with the phase in the calcined powder.

36 MATERIALS SCIENCE↗

Structural and dielectric properties of Nd/Ca co-doped bi-ferrite multiferroics

Single-phase polycrystalline samples of Bi{sub 0.8}Nd{sub 0.2−x}Ca{sub x}FeO{sub 3} (x = 0.0, 0.1) were synthesized by chemical coprecipitation method. X-ray diffraction patterns accompanied by Rietveld-refined crystal structure parameters reveal the phase transition of Bi{sub 0.8}Nd{sub 0.1}Ca{sub 0.1}FeO{sub 3} with rhombohedral R3c symmetry to triclinic structure of Bi{sub 0.8}Nd{sub 0.2}FeO{sub 3} sample. Frequency dependence of dielectric constant (ε') and dielectric loss (tanδ), infers enhancement of both ε' (tanδ) in narrow band gap of Nd/Ca co-doped BFO as compare to wide band pristine BFO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoluminescence of nanocrystalline CaSO{sub 4}: Dy for gamma dosimetry and calculation of trapping parameters using deconvolution method

Nanorods of CaSO{sub 4}: Dy having diameter 20 nm and length 200 nm have been synthesized by the chemical coprecipitation method. These samples were irradiated with gamma radiation for the dose varying from 0.1 Gy to 50 kGy and their TL characteristics have been studied. TL dose response shows a linear behavior up to 5 kGy and further saturates with increase in the dose. A Computerized Glow Curve Deconvolution (CGCD) program was used for the analysis of TL glow curves. Trapping parameters for various peaks have been calculated by using CGCD program.

61 RADIATION PROTECTION AND DOSIMETRY↗

Modulated magnetoelectric property of BiFeO{sub 3} incorporated in Co{sub 0.50}Fe{sub 0.50}Fe{sub 2}O{sub 4}

Nanocomposite of (BiFeO{sub 3}){sub 0.50} (Co{sub 0.50}Fe{sub 0.50}Fe{sub 2}O{sub 4}){sub 0.50} were prepared by using a chemical coprecipitation method. X- ray diffraction (XRD) was recorded to confirm the desired crystallographic phase of the sample. The nanocrystallite size of each component including their average size was calculated from the broadening of the XRD peaks using the well known Debye-Scherrer equation. To confirm the presence of the onset of magnetic ordering in ac hysteresis loops were recorded. The dielectric and ferroelectric property was also confirmed the presence of electric ordering in the sample at room temperature. The magnetic property of BFO has been substantially enhanced by the strong magnetic host of Co{sub 0.50}Fe{sub 0.50}Fe{sub 2}O{sub 4}.

36 MATERIALS SCIENCE↗

Milling time and temperature dependence on Fe{sub 2}TiO{sub 5} nanoparticles synthesized by mechanical alloying method

Fe{sub 2}TiO{sub 5} is one type of titanate oxides which has M{sub x}Ti{sub y}O{sub z} crystal structure. It has various kinds of applications due to its electric and magnetic properties such as spintronics, electromagnetic devices, and gas sensor. In this study, Fe{sub 2}TiO{sub 5} nanoparticles were synthesized by simple mechanical alloying using planetary ball milling machine with various milling times and sintering temperatures. TiO{sub 2} and Fe{sub 2}O{sub 3} powders obtained from coprecipitation process were used as starting materials. The resulted Fe{sub 2}TiO{sub 5} powders were characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Vibration Sample Magnetometer (VSM) in order to observe crystal quality, particles morphology, and magnetic properties respectively. As the milling time increases and the sintering temperature decreases, the crystal size of Fe{sub 2}TiO{sub 5} phase decreases. The smallest crystal size of the synthesized Fe{sub 2}TiO{sub 5} nanoparticles was ∼ 51 nm obtained by the milling time of 25 hours and sintering at 1100°C. The distribution of the resulted Fe{sub 2}TiO{sub 5} nanoparticles was not so homogeneous due to the appearance of small amount impurities. The VSM measurements show that a paramagnetic property was observed which should be analyzed more details on the low external magnetic fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterization of black, red and yellow nanoparticles pigments from the iron sand

The aim of this research is to synthesize nanoparticles of black pigment of Magnetite (Fe{sub 3}O{sub 4}), red pigment of hematite (α-Fe{sub 2}O{sub 3}), and yellow pigment of ghoetite (α-FeOOH) from the iron sand. The black pigment of Fe{sub 3}O{sub 4} and the yellow pigment α-FeOOH nanoparticles were synthesized by coprecipitation method with variation of pH. Whereas, the red pigment Fe{sub 2}O{sub 3} was synthesized by sintering Fe{sub 3}O{sub 4} nanoparticles at temperature between 400 °C and 700 7°C for 1 hour. All the pigments has been characterized using X-ray diffraction and SEM. The XRD results shown that the particle size of the black pigmen Fe{sub 3}O{sub 4}, red pigment Fe{sub 3}O{sub 4} and yellow pigment α-FeOOH are around 12, 32, and 30 nm respectively. The particle size of Fe{sub 2}O{sub 3} nanoparticles increase by increasing sintering temperature from 32 nm at 400 °C to 39 nm at 700 °C. For yellow pigment of α-FeOOH, the particle size increase by increasing pH from 30,54 nm at pH 4 to 48,60 nm at pH 7. The SEM results shown that the morphologies of black, yellow and red pigments are aglomarated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multicolour upconversion emission from Ho{sup 3+}-Tm{sup 3+}-Yb{sup 3+} codoped CaMoO{sub 4} phosphor

The Ho{sup 3+}-Tm{sup 3+}-Yb{sup 3+} codoped CaMoO4 phosphor powder has been synthesized by chemical coprecipitation technique. For the structural investigation the X-ray diffraction analysis has been done. Multicolour upconversion (UC) emission in the visible region from the prepared material has been observed under the 980 nm near infrared (NIR) excitation. The UC emission bands ∼ 474 nm (blue), ∼ 541 nm (green) and ∼ 661 nm (red) region have been assigned as {sup 1}G{sub 4}→{sup 3}H{sub 6} (Tm{sup 3+}), {sup 5}F{sub 4}{sup 5}S{sub 2}→{sup 5}I{sub 8} (Ho{sup 3+}) and {sup 5}F{sub 5}→{sup 5}I{sub 8} (Ho{sup 3+}) transitions respectively.

36 MATERIALS SCIENCE↗

Structural and FMR lineshape analysis of Mn Zn-ferrite nanoparticles

The Mn{sub 0.25}Zn{sub 0.75}Fe{sub 2}O{sub 4} (MZF) nanoparticles of 3 to 5 nm size were synthesized by chemical coprecipitation method. The X-ray diffraction (XRD) patterns were well fitted with single phase spinel ferrite structure using Rietveld analysis as Fd-3m space group. The ferromagnetic resonance (FMR) spectra of MZF nanoparticles becomes more asymmetric with increase in particle size from 3 to 5 nm. The change in FMR line shape is attributed to the increase in ferromagnetic interactions and anisotropy in the system with increase in nanoparticles size. The decrease in total absorption of the FMR line with decreasing temperature at low temperatures indicates weak antiferromagnetic coupling between the octahedral and tetrahedral sublattices of the spinel ferrite system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrostatic vs steric stabilization of Fe{sub 3}O{sub 4} and Co{sub 0.5}Fe{sub 2.5}O{sub 4} nanoparticles

Magnetic nanoparticles of magnetite/maghemite and cobalt ferrite Co{sub 0.5}Fe{sub 2.5}O{sub 4} were stabilized in deionized water with perchloric acid and, respectively, sodium oleate in order to prevent agglomeration and sedimentation tendency aiming further biomedical applications. Results obtained through Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Nanoparticle Tracking Analysis (NTA), and Vibrating Sample Magnetometry (VSM) were discussed comparatively for the four suspensions highlighting specific microstructural and magnetic features of each type of soft magnetic colloidal nanomaterial on the background of coprecipitation method adjusting. The results entitled us to plan in the next research stage biological tests focused on such nanoparticle suspensions impact on cell cultures.

36 MATERIALS SCIENCE↗

Influence of pH on the formulation of TiO{sub 2} powder prepared by co-precipitation of TiCl{sub 3} and photocatalytic activity

Titanium dioxide (titania) nanoparticle were synthesized by coprecipitation process of titanium trichloride (TiCl{sub 3}) in aqueous medium, with NH{sub 4}OH as pH regulator. The pH solution was varied during the synthesis process between pH 3-8.4, and all samples were calcined temperature at 400°C for 3 hours. Characteristics and properties of the TiO{sub 2} powder were investigated using X-ray diffraction (XRD), Scanning Electron Microscopy (SEM). XRD results show that the single-phase rutile formed when the pH is less than 5, anatase single phase formed began pH 8, and the pH of the solution between 5-8 formed mixed phase rutile-anatase-brookite, rutile-brookite or anatase-brookite. Methylene Blue (MB) photodegradation test were performed in order to evaluate photocatalytic activity. Nanoparticles TiO{sub 2} rutile, anatase phase, and mixed phase rutile-brookite, anatase-brookite used to test the photocatalytic activity by measuring the absorbance spectrum photodegradation using UV-Vis spectrometer. The test results showed that the mixture phase of rutile-brookite provide the greatest photodegradation than other phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of nano-forsterite powder by making use of natural silica sand

Nano-forsterite powder with natural silica sand and magnesium powder as the raw materials have been succesfully synthesized. The silica sand was purified followed by a coprecipitation process to obtain colloidal silica. The magnesium powder was dissolved in a chloric acid solution to obtain MgCl{sub 2} solution. The nanoforsterite powder was synthesised using a sol-gel method which included the mixing the colloidal silica and the MgCl{sub 2} solution with various aging and filtering processes. The samples were dried at 100 °C using a hot plate and then the dried powders were calcinated at 900 °C for 2 hours. The samples were characetised for their elements and phase compositions using X-ray Flourescence (XRF) and X-ray Diffraction (XRD) methods, respectively. The diffraction data were qualitatively analyzed using Match!2 software and quantitatively using Rietica software. The crystallite size was verified using Transmission Electron Microscopy (TEM). Results of XRD data analysis showed that the forsterite content reached up to 90.5% wt. The TEM average crystallite size was approximately 53(6) nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of calcination temperature on the photocatalytic activity of TiO{sub 2} powders prepared by co-precipitation of TiCl{sub 3}

The adsorption of basic dye methylene blue (MB) onto titanium dioxide (titania) powder that were prepared by coprecipitation method of TiCl{sub 3} and NH{sub 4}OH as iniatial material with different calcination temperature was studied to examine the photocatalytic activity. Synthesis process carried out by the solution pH was adjusted to be 8. Effect of calcination temperature on the titania powder were characterized with Differential Scanning Calorimetry/Thermogravimetry (DSC/TG), X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM). The result of TG and XRD showed that the NH{sub 4}Cl decomposed between 235-372°C. The XRD result showed that the anatase TiO{sub 2} only contained a single phase when the calcination temperature of the precursor at 800°C, and over which it began to grow rutile phase. The influence of synthesis condition on the photocatalytic activity of TiO{sub 2} powder was determined by the photodegradation of MB dye under UV light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Response of Ammonia-oxidizing Bacterial and Archaeal Populations to Organic Nitrogen Amendments in Low-Nutrient Groundwater

To better understand the fate of ammonia introduced into low-nutrient groundwater as a result of the application of a novel remediation approach for trace metal contaminants, the diversity and abundance of ammonia-oxidizing bacteria and archaea (AOB and AOA, respectively) were examined in samples collected during a field trial of the approach. The ammonia is derived from microbial urea hydrolysis, which has the potential to induce the formation of calcite and remove contaminants by coprecipitation in the calcite. The in situ oxidation of the ammonia by AOB and AOA could, however, potentially destabilize the calcite and lead to elevated nitrate levels in the groundwater. To evaluate the potential for stimulating ammonia oxidation by addition of urea, samples were collected from the Eastern Snake River Plain Aquifer in Idaho before, during, and after the addition of molasses and urea, and subjected to PCR analysis of ammonia monooxygenase subunit A (amoA) genes. AOB and AOA were present in all of the samples tested, with the AOA amoA genes more numerous in all of the samples except those collected following urea addition, when AOB genes were slightly more abundant. Following urea addition, nitrate levels rose and ammonia-oxidizing microorganisms (AOB + AOA) increased relative to the total microbial population, evidence that nitrification was stimulated by urea hydrolysis. Bacterial amoA diversity was limited to two sequence types, whereas the archaeal amoA analyses revealed 20 unique operational taxonomic units (OTUs), including several that were significantly different from any reported previously from other environments. In view of the results from this study, the potential for stimulation of ammonia-oxidizing communities should be considered in field-scale engineering activities involving microbial urea hydrolysis in groundwater.

59 BASIC BIOLOGICAL SCIENCES↗

Luminescent properties of solid solutions in the PbF{sub 2}–Euf{sub 3} system and lead fluoroborate glass ceramics doped with Eu{sup 3+} ions

Lead fluoroborate glasses doped with Eu{sup 3+} are synthesized, studied, and used to produce glassceramics by heat treatment. The structure of glass-ceramics is determined by X-ray diffraction. The optical, mechanical, and luminescent properties of the glass-ceramics are studied. The structure and spectral-luminescent properties of solid solutions in the PbF{sub 2}–EuF{sub 3} system obtained by both solid-phase reaction and coprecipitation from solutions are investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Some Physical Properties of the New Intermetallic Compound NbCd{sub 2}

Solid solutions of cadmium in niobium and NbCd{sub 2} phase are formed by magnetron sputtering and coprecipitation on substrates moving relative to the flow of Nb and Cd particles. The NbCd{sub 2} phase can be described by a tetragonal unit cell with the parameters a = 0.84357 nm, c = 0.54514 nm, and c/a = 0.6426. A very high hole concentration in NbCd{sub 2} is established by studying the coating absorption and transmission spectra corresponding to the intermetallic-compound composition near the fundamental absorption edge, determining the band gap, and measuring the carrier mobility. Such a concentration is characteristic of a strongly degenerate semiconductor or metal. The band gap is determined to be 1.26 eV. The variation in the concentration of carriers and their mobility depending on the cadmium concentration in coatings of the Nb–Cd system confirms the occurrence of the NbCd{sub 2} phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kinetics of Early Decomposition Stages in Diluted bcc Fe–Сu–Ni–Al Alloy: MC+MD Simulation

A combined approach including the Monte Carlo and molecular-dynamics simulation, decomposition kinetics and segregation formation in the multicomponent low-alloy Fe–1.5Cu–2Ni–1.5Al (at %) alloy is studied. It is shown that the formation of Cu nanoparticles surface-enriched with Ni and Al (coprecipitation mode) includes several stages: (i) the formation of clusters consisting of several Cu atoms, (ii) their enrichment with Ni and Al atoms, and (iii) redistribution of Ni and Al atoms with the formation of a surface layer providing stabilization of Cu nanoparticles. Observed structural features of segregations and their stability in Fe–Cu–Ni–Al alloys is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of cobalt incorporation and lithium enrichment in lithium nickel manganese oxides.

Candidate cathode materials of cobalt-incorporated and lithium-enriched Li{sub (1+x)}Ni{sub 0.25}Co{sub 0.15}Mn{sub 0.6}O{sub (2.175+x/2)} (x=0.225-0.65) have been prepared by a coprecipitation method and a solid-state reaction. We systematically investigated the effect of both cobalt presence and lithium concentration on the structure, physical properties, and electrochemical behavior of the studied samples. The electrochemical performance of the cobalt-containing compounds showed much less dependence on the variation in the lithium amounts compared to the cobalt-free counterpart. The study demonstrated that even with cobalt incorporation, proper lithium content is the key to desirable cathode materials with nanostructured primary particles that are indispensable to achieve high capacity and high rate capability and, therefore, both improved energy and power densities for lithium-ion batteries.

36 MATERIALS SCIENCE↗

Synthesis and Characterization of Zirconium Substituted Cobalt Ferrite Nanopowders

Nanocrystalline ferrites; CoFe 2 O 4 (CFO) and CoFe 1.9 Zr 0.1 O 4 (CFZO) have been synthesized through chemical coprecipitation method. Moreover, the role played by the zirconium ions in improving the magnetic and structural properties is analyzed. X-ray diffraction revealed a single-phase cubic spinel structure for both materials, where the crystallite size increases and the lattice parameter decreases with substitution of Zr. The average sizes of the nanoparticles are estimated to be 16-19 nm. These sizes are small enough to achieve the suitable signal to noise ratio in the high density recording media. An increase in the saturation magnetization with the substitution of Zr suggests the preferential occupation of Zr 4+ ions in the tetrahedral sites. A decrease in the coercivity values indicates the reduction of magneto-crystalline anisotropy. We investigated spinel ferrites can be used also in recoding media due to the large value of coercivity 1000 Oe which is comparable to those of hard magnetic materials.

36 MATERIALS SCIENCE↗