Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CARBON IONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

New Anode Material for Rechargeable Li-ION Cells

Carbon materials, such as graphite, cokes, pitch and PAN fibers, are being evaluated in lithium batteries as alternate anode materials with some degree of success. There is an effort to look for other non-carbon anode materials which have larger Li capacity, higher rate capability, smaller first charge capacity loss and better mechanical stability during cycling. A Li-Mg-Si material is evaluated.

rechargeable batteries anode materials Li-ION cell↗
DOE OSTI2020

Implementation of Ion Exchange Processes for Carbon Dioxide Mineralization Using Industrial Waste Streams

Sequestration of CO 2 within stable mineral carbonates (e.g., CaCO 3 ) represents an attractive emission reduction strategy because it offers a leakage-free alternative to geological storage of CO 2 in an environmentally benign form. However, the pH of aqueous streams equilibrated with gaseous streams containing CO 2 (pH < 4) are typically lower than that which is required for carbonate precipitation (pH > 8). Traditionally, alkalinity is provided by a stoichiometric reagent (e.g., NaOH) which renders these processes environmentally hazardous and economically unfeasible. This work investigates the use of regenerable ion-exchange materials to induce alkalinity in CO 2 -saturated aqueous solutions such that the pH shift required for mineralization occurs without the need for stoichiometric reagents. Na + -H + exchange isotherms (at [H + ] = 10 −8 –10 −1 M) and rates were measured for 13X and 4A zeolites and TP-207 and TP-260 organic exchange resins in batch equilibrium and fixed-bed exchange experiments, respectively. At solutions equilibrated with CO 2 at 1.0 atm (pH = 3.9), H + exchange capacities for the materials were similar (1.7–2.4 mmol H + /g material) and resulted in pH increases from 3.9 to greater than 8.0. Multi-component mixtures using Ca 2+ and Mg 2+ cations (at 10 −3 –10 −1 M) in CO 2 -saturated water were used to probe competitive ion exchange. The presence of divalent cations in solution inhibited H + exchange, reducing capacities to as low as 0.2 mmol H + /g for both resins and zeolites. Dynamic H + exchange capacities in fixed-bed ion exchange columns were similar to equilibrium values for resins (∼1.5 mmol/g) and zeolites (∼0.8 mmol/g) using inlet solutions that were equilibrated with gaseous streams of CO 2 at 1.0 atm. However, exchange kinetics were limited by intraparticle diffusion as indicated by the increased rate parameters with increasing inlet flow rates (20–160 cm 3 min −1 ). Experimental calcite precipitation from mixing the alkaline CO 3 2− -rich water solution obtained from the ion-exchange column with a simulated liquid waste stream solution achieved thermodynamic maximum yields. The results from these studies indicate that ion exchange processes can be used as an alternative to the addition of stoichiometric bases to induce alkalinity for the precipitation of CaCO 3 , thereby opening a pathway toward sustainable and economic mineralization processes.

42 ENGINEERING↗
DOE OSTI2020

A 3D porous honeycomb carbon as Na-ion battery anode material with high capacity, excellent rate performance, and robust stability

Motivated by the synthesis of three-dimensional (3D) honeycomb carbon structures and the subsequent theoretical prediction of an energetically more favorable hexagonal carbon phase composed of 28 carbon atoms in the unit cell (hC28) with ordered pores, excellent mechanical properties, and metallic feature, we explore its potential for a Na-ion battery (NIB) anode material. Using density functional theory based calculations, we find that hC28 is a promising candidate whose specific capacity of 717 mAh/g is almost three times larger than that of hard carbon (~250 mAh/g). In addition, migration barrier of Na ions along the honeycomb channel is only 0.08 eV and the volume change during the charging/discharging process is merely 2.30%, which are much less than those of other carbon-based NIB anode materials. The average voltage is also low (0.36 eV) which can provide high operating voltage when connected to the cathode. Finally, these encouraging results would pave the way towards the development of hC28 as NIB anode with high capacity, excellent rate performance, low open-circuit voltage, and long-term cycle life.

36 MATERIALS SCIENCE↗
NASA NTRS2010

Silicon Composite Anode Materials for Lithium Ion Batteries Based on Carbon Cryogels and Carbon Paper

A variety of materials are under investigation for use as anode materials in lithium-ion batteries, of which, the most promising are those containing silicon. One such material is a composite formed via the dispersion of silicon in a resorcinol-formaldehyde (RF) gel followed by pyrolysis. Two silicon-carbon composite materials, carbon microspheres and nanofoams produced from nano-phase silicon impregnated RF gel precursors have been synthesized and investigated. Carbon microspheres are produced by forming the silicon-containing RF gel into microspheres whereas carbon nanofoams are produced by impregnating carbon fiber paper with the silicon containing RF gel to create a free standing electrode. Both materials have demonstrated their ability to function as anodes and utilize the silicon present in the material. Stable reversible capacities above 400 mAh/g for the bulk material and above 1000 mAh/g of Si have been observed.

Woodworth, James↗
DOE OSTI2022

Proton stopping measurements at low velocity in warm dense carbon

Abstract Ion stopping in warm dense matter is a process of fundamental importance for the understanding of the properties of dense plasmas, the realization and the interpretation of experiments involving ion-beam-heated warm dense matter samples, and for inertial confinement fusion research. The theoretical description of the ion stopping power in warm dense matter is difficult notably due to electron coupling and degeneracy, and measurements are still largely missing. In particular, the low-velocity stopping range, that features the largest modelling uncertainties, remains virtually unexplored. Here, we report proton energy-loss measurements in warm dense plasma at unprecedented low projectile velocities. Our energy-loss data, combined with a precise target characterization based on plasma-emission measurements using two independent spectroscopy diagnostics, demonstrate a significant deviation of the stopping power from classical models in this regime. In particular, we show that our results are in closest agreement with recent first-principles simulations based on time-dependent density functional theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Energy- and carbon-efficient CO 2 /CO electrolysis to multicarbon products via asymmetric ion migration–adsorption

Carbon dioxide/monoxide (CO 2 /CO) electrolysis provides a means to convert emissions into multicarbon products. However, impractical energy and carbon efficiencies limit current systems. Here we show that these inefficiencies originate from uncontrolled gas/ion distributions in the local reaction environment. Understanding of the flows of cations and anions motivated us to seek a route to block cation migration to the catalyst surface-a strategy we instantiate using a covalent organic framework (COF) in bulk heterojunction with a catalyst. The pi-conjugated hydrophobic COFs constrain cation (potassium) diffusion via cation-pi interactions, while promoting anion (hydroxide) and gaseous feedstock adsorption on the catalyst surface. So as a result, a COF-mediated catalyst enables electrosynthesis of multicarbon products from CO for 200 h at a single-pass carbon efficiency of 95%, an energy efficiency of 40% and a current density of 240 mA cm -2 .

42 ENGINEERING↗
NASA NTRS1983

Experimental determination of geomagnetically trapped energetic heavy ion fluxes

The observed spatial, directional and spectral characteristics of geomagnetically trapped heavy ions are reviewed. It is found that ions heavier than protons are significantly abundant in the earth's radiation belts, not only at low (ring-current) energies, but also at multi-MeV energies. Observations both at the geomagnetic equator and at low altitudes on the corresponding L-shell show the important roles played by the heavy ions. The heavy ion-to-proton flux ratio can exceed unity when compared at equal total ion energy. This is particularly the case at several MeV energies and in the outer radiation zone. In contrast, comparisons at equal energy per nucleon generally favor protons. The trapped fluxes of helium ions, of carbon, nitrogen and oxygen (CNO) ions, and of ions heavier than fluorine all exhibit high degrees of pitch angle anisotropy. Many of the observed radiation belt particle distribution characteristics are in agreement with first-order (quiet time) theoretical predictions, although some of the finer details await further research.

Spjeldvik, W. N.↗
DOE OSTI2021

Molecular Engineering to Enable High-Voltage Lithium-Ion Battery: From Propylene Carbonate to Trifluoropropylene Carbonate

Molecular engineering of electrolyte structures has led to the successful application of trifluoropropylene carbonate (TFPC), a fluorinated derivative of propylene carbonate (PC), in next-generation high-voltage high-energy lithium-ion cell. Additionally, in contrast to a PC-based electrolyte which cointercalates in the form of Li + -solvated species into the graphene layer and exfoliates a graphite anode, a TFPC-based electrolyte is highly compatible with a graphite anode at low potential. Additionally, it shows exceptional oxidation stability on the charged cathode surface owing to the presence of the -CF 3 group. An all-fluorinated electrolyte, that is, 1.0 M LiPF 6 TFPC/2,2,2-trifluoroethyl carbonate (FEMC) (1/1 volume ratio) + FEC additive, was formulated and demonstrated excellent cycling stability in a high-voltage LiNi 0.5 Mn 0.3 Co 0.2 O 2 /graphite cell cycled between 3.0 and 4.6 V.

25 ENERGY STORAGE↗
NASA NTRS2003

Proposal for Testing and Validation of Vacuum Ultra-Violet Atomic Laser-Induced Fluorescence as a Method to Analyze Carbon Grid Erosion in Ion Thrusters

Previous investigation under award NAG3-25 10 sought to determine the best method of LIF to determine the carbon density in a thruster plume. Initial reports from other groups were ambiguous as to the number of carbon clusters that might be present in the plume of a thruster. Carbon clusters would certainly affect the ability to LIF; if they were the dominant species, then perhaps the LIF method should target clusters. The results of quadrupole mass spectroscopy on sputtered carbon determined that minimal numbers of clusters were sputtered from graphite under impact from keV Krypton. There were some investigations in the keV range by other groups that hinted at clusters, but at the time the proposal was presented to NASA, there was no data from low-energy sputtering available. Thus, the proposal sought to develop a method to characterize the population only of atoms sputtered from a graphite target in a test cell. Most of the ground work had been established by the previous two years of investigation. The proposal covering 2003 sought to develop an anti-Stokes Raman shifting cell to generate VUW light and test this cell on two different laser systems, ArF and YAG- pumped dye. The second goal was to measure the lowest detectable amounts of carbon atoms by 156.1 nm and 165.7 nm LIF. If equipment was functioning properly, it was expected that these goals would be met easily during the timeframe of the proposal, and that is the reason only modest funding was requested. The PI was only funded at half- time by Glenn during the summer months. All other work time was paid for by Whitworth College. The college also funded a student, Charles Shawley, who worked on the project during the spring.

Stevens, Richard↗
DOE OSTI2023

Methods for forming silicon-silicon oxide-carbon composites for lithium ion cell electrodes

Composite silicon based materials are described that are effective active materials for lithium ion batteries. The composite materials comprise processed, e.g., high energy mechanically milled, silicon suboxide and graphitic carbon in which at least a portion of the graphitic carbon is exfoliated into graphene sheets. The composite materials have a relatively large surface area, a high specific capacity against lithium, and good cycling with lithium metal oxide cathode materials. The composite materials can be effectively formed with a two-step high energy mechanical milling process. In the first milling process, silicon suboxide can be milled to form processed silicon suboxide, which may or may not exhibit crystalline silicon x-ray diffraction. In the second milling step, the processed silicon suboxide is milled with graphitic carbon. Composite materials with a high specific capacity and good cycling can be obtained in particular with balancing of the processing conditions.

Anguchamy, Yogesh Kumar↗
DOE OSTI2022

Combining Experimental and Theoretical Techniques to Gain an Atomic Level Understanding of the Defect Binding Mechanism in Hard Carbon Anodes for Sodium Ion Batteries

Sodium ion batteries (NIBs) are an attractive alternative to lithium–ion batteries in applications that require large–scale energy storage due to sodium's high natural abundance and low cost. Hard carbon (HC) is the most promising anode material for NIBs; however, there is a knowledge gap in the understanding of the sodium binding mechanism that prevents a rational design of HC. This study tunes sucrose–derived HC via synthesis temperature then evaluates the structural, physical, and electrochemical properties. Neutron total scattering is used to generate structural models by fitting pair distribution functions (PDF) with a combination of molecular dynamics and reverse Monte Carlo methods. From this model, the number and type of structural features are identified, quantified, and correlated to the galvanostatic charge/discharge. A method of PDF “fingerprinting” binding sites using Na probe atoms is developed and analyzing these PDFs reveals an atomistic view of ion binding sites responsible for “defect” storage mechanisms. Combining these techniques results in an atomic–level study that provides a big picture of the Na–binding mechanism in NIBs, which allows for more precise tuning of the structure–property relationships in the future. Finally, the methodologies developed will also enable new strategies for the analysis of amorphous functional materials.

25 ENERGY STORAGE↗
DOE OSTI2023

The Impact of Fluoroethylene Carbonate Additive on Charged Sodium Ion Electrodes/Electrolyte Reactivity Studied Using Accelerating Rate Calorimetry

The effects of fluoroethylene carbonate (FEC) electrolyte additive on charged sodium ion electrode/electrolyte reactivity at elevated temperatures were investigated using accelerating rate calorimetry (ARC). The beneficial effect of FEC on cell lifetime was demonstrated using Na 0.97 Ca 0.03 [Mn 0.39 Fe 0.31 Ni 0.22 Zn 0.08 ]O 2 (NCMFNZO)/hard carbon (HC) pouch cells first prior to ARC measurements. Electrodes from these pouch cells were utilized as sample materials and 1.0 M NaPF 6 in propylene carbonate (PC):ethyl methyl carbonate (EMC) (1:1 by vol.) was chosen as control electrolyte. Adding 2 wt% and 5 wt% FEC to the electrolyte does not significantly affect the reactivity of de-sodiated NCMFNZO compared to the control electrolyte. However, the addition of FEC obviously changed the reactivity between sodiated HC and electrolytes, especially by showing a suppression on the exothermal behavior between 160 °C and 230 °C. These results give a head to head comparison of the reactivity of FEC additive containing electrolytes with charged sodium ion electrode materials at elevated temperatures and show that the use of FEC at additive levels should not compromise the cell safety when extending cell lifetime.

25 ENERGY STORAGE↗
DOE OSTI2022

Tuning Fluorination of Linear Carbonate for Lithium-Ion Batteries

Liquid electrolyte engineering plays a critical role in modern lithium-ion batteries. However, the existing electrolytes fall short when used with some trending battery chemistries such as high-voltage and high-energy-density electrodes. Fluorination of electrolyte solvents has been identified as an effective approach for improved cyclability, but few works systematically studied the effects of fluorination extent of carbonate solvents on battery performance. Here we design and synthesize a family of fluorinated ethyl methyl carbonates. Different numbers of F atoms are finely tuned to yield monofluoroethyl methyl carbonate (F1EMC), difluoroethyl methyl carbonate (F2EMC) and trifluoroethyl methyl carbonate (F3EMC). The cycling behavior of several types of lithium-ion pouch cells, including graphite (Gr)/single-crystalline LiNi 0.8 Mn 0.1 Co 0.1 O 2 (SC-NMC811), Gr-SiO x /LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622), high-voltage Gr/LiNi 0.5 Mn 1.5 O 4 (LNMO), Gr/layered Li-rich Mn-based oxide (LLMO) and fast-charging Gr/NMC622, were systematically investigated to understand the impact of fluorination degree. Compared to the commercially available F3EMC, we found that the partially-fluorinated F1EMC and F2EMC in some cases showed improved cycling stability, which we attribute to their locally-polar –CH 2 F and –CHF 2 groups and thus fast ion conduction than –CF 3 . This work suggests that highly or fully fluorinated solvents are not necessarily desirable; instead, fluorination degree needs to be rationally and finely tuned for optimized lithium-ion cell performance.

25 ENERGY STORAGE↗
NASA NTRS1977

Extraction of urea and ammonium ion

Water purification system keeps urea and ammonium ion concentration below toxic limits in recirculated water of closed loop aquatic habitat. Urea is first converted to ammonium ions and carbon dioxide by enzygmatic action. Ammonium ions are removed by ion exchange. Bioburden is controlled by filtration through 0.45 micron millipore filters.

Anselmi, R. T.↗
NASA NTRS1990

Recent findings on angular distributions of dayside ring current energetic ions

The angular distributions observed in the equatorial region for energetic protons, helium ions, and carbon-nitrogen-oxygen ions are investigated. The anisotropy index for the ions in the equatorial magnetosphere between L shells is examined, and a variety of angular distributions different from simple pancake distributions are presented. The survey reveals unusual angular distributions which suggest for the first time a net field-aligned transport of energetic ring current ions and a sharp intensity enhancement over a pitch angle range centered at 90 deg. The latter reflects a sharp boundary of ring curent energetic ions at L of roughly 3 and 4, plausibly due to the addition of a newly injected population.

Lui, A. T. Y.↗
DOE OSTI2024

Novel Q-Carbon Anodes for Sodium-Ion Batteries

The lack of a standard anode for sodium-ion batteries (SIBs) has greatly hindered their applications. Herein, we show that a novel phase of carbon, namely Q-carbon, is an effective anode material for sodium-ion batteries. The Q-carbon, which is a metastable phase of carbon consisting of about 80% sp 3 - and 20% sp 2 -bonded carbon, is synthesized by nonequilibrium pulsed laser annealing and arc-discharge methods. Two types of Q-carbons, Q1 and Q2, were evaluated as anode material for SIBs. Q1 had a slow quench and was used as the control, whereas Q2 was Q-carbon with a rapid quenching. Q1 exhibits a high initial columbic efficiency of 81% and a low-capacity retention of less than 60%, whereas Q2 has a low initial columbic efficiency of 58% and a high-capacity retention of 81%. Q2 exhibits a stable capacity of 168 mAh·g −1 at a cycling rate of C/3 (124 mA·g −1 ), which is comparable to other hard carbon anodes reported in the literature. This unique synthesis method opens a pathway for the further tuning of Q-carbon with higher trapping/charging of Na + ions in improved SIBs.

25 ENERGY STORAGE↗